Pa30 infotyp 24: Note entry for qualification

Hello everybody
When you get into pa30 --> infotype 24 'Qualification'.
You have the property to write for each qualification additional information into 'Note'.
So, that's great, but where is this note saved?
I have to get the field 'note' for a report. But I have no idea, in which table this information is saved in.
Can anybody help me?
Best regards
Petra

Hi,
Use function READ_TEXT to get back the text.
If you set a break-point in function SAVE_TEXT you will be able to see what parameters you need to provide to the function READ_TEXT to retrieve the note.
The function SAVE_TEXT is called when you enter a note.
For information the table is STXH as it is with any other texts/notes etc...
Hope this helps.
Cheers
Colin.

Similar Messages

How can I show icon Services for Object in PA30 Infotype 0019

Hi guy.
How can I show icon Services for Object in PA30 Infotype 0019 ?
This icon display in some infotype example infotype 0024(Qualifications).But I wanna use in Infotype 0019.
I don't wanna use menu "Assign facsimile".
Best regards.
Chutima.

Sorry - should have said I'm using JDev 10.1.3.0.4 with JSF & ADF BC.

User exit for salary calcuation through PA30 infotype 8

Hello gurus,
I want user exit which will trigger in PA30 when we put infotype 8 for a particular employee in display or change mode.
In PBAS package i have found the exit PARA0002. In this i have 3 components. I put the hardcoded break-poin in these function modules. But when i go to PA30 infotype 8 in change or display mode. The break-point is not triggered.. or control doesn't go to that point. In CMOD i created the project and activated. But still the break-point can't be reached. What else can be done or any other exit?
Regards,
Yayati Ekbote

Hi yayati,
For infotype 8 salary (or in fact for any other PA infotype) we can use the enhancment PBAS0001.
It has two components/FM. One for PBO i.e. for defaulting values on screen and other for PAI i.e. for checking values before saving.
EXIT_SAPFP50M_001
EXIT_SAPFP50M_002
Hope this helps.
regards,
amit m.

Bdc recording of infotype 24 for qualification

Hi Frn's ,
i want to record bdc of infotype 24 for qualification . but i am not able to input the value of qualification in table control . for this i have to search click the create button given in bottom and after that a pop up is raising to search the value , when i am putting the value and hitting the enter , pop up of serch help is raising ,
the problem begins from here ...
now i am selecting that single value by clicking the check box .....but in recording there is no effect of this .... so finally i am not able to select that value ....
please somebody give me the solution ..
Thanks and Regards.
Priyank Dixit

Hi ,
i think u can also use HR_INFOTYPE_OPERATION to create infotype records , see its documentation to know how to use it .
or search on sdn to get sample programs.
regards
Prabhu

An entry in field Funds Ctr is not permitted for account 401000 Message no F5394

Hi Friends,
I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
Please help on this..
Thanks
Goutam

Hi,
please check the message the error will give you the table number or Programme name
go to SE38 for programme and for table SM30
system will show where is the exact error facing.
thanks

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Not able to create entries for ALBTCMON (SCM 4.10)

I am trying to create entries for monitoring jobs that start with "SAP_*" and I am trying to add entry into ALBTCMON table. But system is trowing the message as below.
===============================================================
Create data processing function module
Message no. SV023
Diagnosis
You have called the function for editing view contents. The function modules needed for the maintenance functionality of this view are not available in the system.
Procedure
The data processing function module must be re-generated.
Contact the system administration.
===============================================================
Can somebody tell whats wrong. I am working in SCM 4.10.
Regards,
Giridhara

Make sure the xWebsites metadata field has the siteId of your site. And as Srinath said, make sure it's "Released"; which can take a moment or two.

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

Any notes for this issue 2 entries for 1 material while searching material

Hello All
Internal goods and services
search material which has more than one UOMs.
When i search material for internal goods and services i get two entries for one material . i know the reson why it dispalys two same items since it might have alternate UOM but however you select any one of the item it will be order unit only as UOM.
Why SRM system showing two enties for one material with same item . enduser may dismay what item item needs to select.
this must be protected right? Any suggestion not to show tow items while searching one material.
Clue:- MARM - ecc table has Alternate UOMs entries fort he material. Any one is facing this problem ?
br
muthu

Hi. I just tried it on our SRM 4 system (I know it's old, upgrade soon hopefully) and I can see the alternate UOM in MARM and also in SRM in COMMPR01, but I only get 1 hit in the search help.
Are you sure you haven't got the same material replicated twice into SRM from 2 different backends or something? Can you see the logical system in the search? Check table COMM_PRODUCT to see if there is more than 1 entry for the material maybe?
If it is the same system and the UOMs causing the problem It seems a bit odd that SAP would introduce this on a new system, have you tried raising a message with them?
Worst case you always have the BBP_F4_READ_ON_ENTRY / BBP_F4_READ_ON_EXIT BADI's.
Regards,
Dave.

Planning File Entry not generated for items releveant to PM

MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
But as per the setting of reorder point PR should be initiated.
When checked the MD21 , material is not flagged ,
I want to know the specific reason why only this material is not flagged for MRP run.
What all settings i can check ?
MATERIAL TYPE : YMRO OP Maint/ Repair/OperSup
Lot size : Repl. to max. stock level after cov. req
Procurement type : F

Hi,
Run the reports MDRE & MDAB to ensure the planning file entries are correct.
About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
Regards,
Vivek

Allow Custom Text Entry for Drop down not working For Dynamic form

Dear All,
In drop down field Allow custom text entry is working fine if the form is save as a static pdf form file.But if the form is save as a Dynamic pdf form file it is not working.I can enter custom text in drop down field but after filling it up when I click on next field the text from the drop down is disappearing.
If any body can please help me to solve this problem.
Thanks a lot in advance
Regards
Rakesh

Dear Jimmypham,
Thanks a lot for your quick response.But it's not working for me.I have even tried with a form having only single field and save it as a dynamic pdf file.In that form also it's not working.The text which I have entered is disappearing when I click outside of this field.
Can you please help me to find out the solution for this problem.
Regards
Rakesh

DNS entry for DC not dynamically updating (Server 2008 R2)

Windows Server 2008 R2. I've got a single DC (I'm preparing to install the 2nd in the next few days). The host (A) record for the DC shows to be static for some reason. I changed the name of the DC recently, then brought down the Exchange server and rebooted
and it successfully connected again. I might have entered in a static DNS entry for the new server name before renaming the server, but I'm not sure.
I've tried to delete the static DNS record for the DC and then reload, but it continues to appear as a static entry. The mail server's DNS record still appears as a dynamic entry.
What am I doing wrong?
Noel Stanford Oveson
jeremyNLSO
MCTS, MCITP, CCENT, CNE, MCSE, CLSE
Berlin, Germany

Hello,
Like Mike suggested, it is normal that it is a static record.
However, if your DC with its new name is not updating its DNS record, check that "Register this connection' addresses in DNS" is checked on the DC's adapter and then run
ipconfig /registerdns using an elevated prompt.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

Check Numbers not flowing for Cash and bank (Contra) entries

Hi Gurus,
Checks are maintained manually. I have maintained check lots for payments for each bank to ensure that the check number matches with the physical checks. Check number 123456 is used for withdrawal of cash. However When I am posting a check receipt entry in FBCJ, the check number is not being picked from the check lot.
Dr. Cash
Cr. HDFC Bank. No check number is shown in the document generated.
When I make a payment to the vendor from F-58 the system is picking up check number 123456 for vendor payment.
Is it possible to pick up the check number from the check lot while making contra entries for cash withdrawal from Bank?
How to resolve this issue?
Should I remove the check lots numbers? If yes, How to enter the check numbers to match the Physical Checks?
Please Help.
Regards,
AVD.

brother,
can u please share the solution?

New entry for a view in SM30 does not save

Hi all,
I created a new entry for a view in SM30.
Then when I tried to SAVE it, it does not SAVE and comes back to the same screen with the new entry. And it continues, until you CANCEL and come out.
Please let me know the reason for it.
Thanks and regards,
Anishur

copy the sap view to a zview make the modifications and generate in se11 the table maintenance generator.
why was it necessary to make the modification to the original SAP view ??
kind regards
arthur
Edited by: A. de Smidt on Apr 16, 2009 9:08 AM

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Pa30 infotyp 24: Note entry for qualification

Similar Messages

Maybe you are looking for