Package doesn't exist
Hi:
I transported 3 ODSs from one system into the other and I would like to change those in the new system but it says package doesnt exist. Only display is allowed. I tried assigning it from the menu -> Object directory entry but cannot change it. Should same package be existing in both the sending and receiving systems? How can I solve this....
Thanks,
Manasa.
The Solution for this is to, transport the Development Calss ( package ) to the Destination System.
Similar Messages
-
I download the xercesImpl-2.6.2.jar file. I want to use all the classes available in the org.apache.html.dom.*. I put the jar file in the jre1.6.0_18\lib\ext folder as well as jdk1.6.0_14\jre\lib\ext folder. But When I try to use the class file available in this jar file it is not allowing,
can you people please help me ?I would check a couple of things...
1) Is your ext folder listed in your classpath?
2) Are you importing from the correct packages? -
Revision: 21277
Revision: 21277
Author: [email protected]
Date: 2011-05-18 11:35:28 -0700 (Wed, 18 May 2011)
Log Message:
Added ds-console source to package-oem and removed copy command for datavisualization.swc which doesn't exist in the specified location. I do not find it in the most recent package-oem.zip neither
Modified Paths:
blazeds/trunk/build.xmlGusar wrote:No, it's not. I have actually seen cases where software rendering gave a higher glxgears score than hardware rendering (and no, it wasn't about vsync). Of course, with *actual* apps on the same machine, software rendering sucked compared to hardware rendering.
Please do not jump to conclusions and make assumptions here like 'when will people finally get it??'. I never said it was a benchmark. I have also seen many examples of where it's results do not go with conventional performance. I have a Radeon 9000 that goes faster on glxgears than a Geforce FX 5600 running Nouveau. Which is the faster card? The FX by miles. It is not a benchmark as it can not be compared between configurations. What I know is that on this individual system, from prior experience over many years when 3D acceleration is working glxgears gets between 300 and 400 fps. When it is not working it gets less than 10. That is a fact but does not mean it is benchmarkable. Yes, a Quake 3 timedemo (I have these numbers too and they very much correlate to glxgears performance for this system given just how slow it is) would be a benchmark but when it runs less than 0.1fps and even the 2D rendering means that navigating the menu is impossible, there just isn't the time to find out. Hence if playing around with drivers on this system I would use glxgears to check that 3D acceleration is working but not to benchmark. Glxinfo does not give you all this evidence.
But to clarify, I wouldn't use glxgears as a benchmark, benchmarking is different and I do a lot of that too. -
Package javax.ejb doesn't exist
hi
iam using weblogic 6.0 on windows 98.and i've set the classpath according to setExamplesEnv given and when iam compiling example files in examples folder of server it says that package javax.ejb doesn't exist.and its not able to resolve EJBObject and EJBHome classes.plz let me know the solution for this.
i have set classpath explicitly in autoexec.bat.hi
iam able to compile my classes after removing white spaces in classpath.thanx for the help.but iam unable to run my client program .after setting environment using setExamplesEnv.cmd when iam trying to run my client program.actually iam executing the statefulsession bean example at config\examples directory.the command i used to do that is as follows
java examples.ejb.basic.statefulSession.Client "http:127.0.0.1:7001" it says that "we were unable to get a connection to the weblogic server at "http://127.0.0.1:7001" please make sure that the server is running"
when iam starting ExamplesServer it says <weblogic server>weblogic server started
<weblogic server>Listen thread listening on port 7001
<weblogic server>SSListen thread listening on port 7002
<Error><Performance Pack>unable to load Performance pack using java i/o
java.lang.UnsatisfiedLinkError:no muxer in java.library.path
at java.lang.ClassLoader.loadLibrary()
at java.lang.Runtime.loadLibrary0()
etc
i doubt whether my server is working properly or not.
i have weblogic6.0 and my o/s in windows 98.plz let me know the solution for this. -
Hello,
We are migrating the ssis packages from 2005 to 2012.
I'm unable to convert Activex Script Task from 2005 vesrsion to 2012 because in 2012 version Activex Script Task doesn't exist.
Can anyone please let me know what is the alternative way to convert Activex Script Task from 2005 vesrsion to 2012?Hi Vinay9738,
Have you tried to upgrade the SSIS 2005 packages to SSIS 2012 packages by using the SSIS Package Upgrade wizard? In certain cases, ActiveX script in SSIS won’t work and we need to either modify the script or replace the ActiveX Script with stock SSIS
tasks. You can find the mapping between some most common patterns used in DTS ActiveX Script and SSIS native tasks from the following link:
http://help.pragmaticworks.com/dtsxchange/scr/ActiveX%20Script%20Task.htm
Here is also a useful link about how to convert ADODB object of ActiveX Script to SSIS tasks:
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20convert%20ADODB%20object%20of%20ActiveX%20Script%20to%20native%20SSIS%20Task.htm
Regards,
Mike Yin
TechNet Community Support -
Package controller doesn't exist
Help!
I'm trying to run this java program. I have four different java programs that are associated with a package. Two programs are saved in one folder and the other two are outside the folder. When I run the program, the error I receive is package **** does not exist. What I am doing wrong. Can someone help me.I don't have that much time. Sorry. But here is a simple explanation.
Class A is in folder C:\myApp\a
Class A's package is a;
Class B is in folder C:\myApp\b
Class B's package is b;
Class B imports package a using
import a;
here are the commands in DOS
set CLASSPATH=c:\myApp;
cd c:\myApp\b
javac *.java -
Problem in compiling JDeveloper 11g R2 - package does not exist
I did a clean all to my application and now me thousand mistakes of references appear during the compilation, which could have failed?
Project: C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\CentauroWeb15.jpr
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ModificaProductosArchivoServlet.java
Error(23,39): package com.bbog.centauro.negocio.comun does not exist
Error(24,39): package com.bbog.centauro.negocio.comun does not exist
Error(25,39): package com.bbog.centauro.negocio.comun does not exist
Error(26,41): package com.bbog.centauro.persistencia.vo does not exist
Error(27,41): package com.bbog.centauro.persistencia.vo does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ProcedimientoServlet.java
Error(22,39): package com.bbog.centauro.negocio.comun does not exist
Error(23,39): package com.bbog.centauro.negocio.comun does not exist
Error(24,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ProcesaOpcionesServlet.java
Error(17,39): package com.bbog.centauro.negocio.comun does not exist
Error(18,39): package com.bbog.centauro.negocio.comun does not exist
Error(19,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\interfaces\GeneracionArchivoVNoMonServlet.java
Error(22,39): package com.bbog.centauro.negocio.comun does not exist
Error(23,39): package com.bbog.centauro.negocio.comun does not exist
Error(24,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ParametroValidacionServlet.java
Error(22,39): package com.bbog.centauro.negocio.comun does not exist
Error(23,39): package com.bbog.centauro.negocio.comun does not exist
Error(24,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\timer\EnviarCronAutomaticoServlet.java
Error(20,39): package com.bbog.centauro.negocio.comun does not exist
Error(21,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ParametrosContingenciaServlet.java
Error(3,39): package com.bbog.centauro.negocio.comun does not exist
Error(6,48): package com.bbog.centauro.persistencia.exception does not exist
Error(7,42): package com.bbog.centauro.persistencia.dao does not exist
Error(9,34): package com.bbog.centauro.util.log does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\timer\EnviarPagosAutomaticoServlet.java
Error(20,39): package com.bbog.centauro.negocio.comun does not exist
Error(21,39): package com.bbog.centauro.negocio.comun does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\administracion\ConsultaParametroValidacionServlet.java
Error(22,39): package com.bbog.centauro.negocio.comun does not exist
Error(23,39): package com.bbog.centauro.negocio.comun does not exist
Error(24,39): package com.bbog.centauro.negocio.comun does not exist
Error(25,41): package com.bbog.centauro.persistencia.vo does not exist
C:\JDeveloper\mywork\CentauroVirgen\CentauroWeb15\src\com\bbog\centauro\controlador\servlet\login\DatosLoginServlet.javaHi.
Please always state the JDev version you use when you ask a question.
What do you mean exactly by cleanup? From the look of it, either you changed the package declaration at the top of you Java files for something that doesn't exist or renamed the on-disk directories in the package structure to something that doesn't match the package declarations in your code.
Do not forget there is a direct correlation between packages names and directories.
So, if you have package
com.oracle.blueberryYou will have the following on the disk:
src\com\oracle\blueberryBest Regards,
Frédéric. -
JRockit doesn't exist in Weblogic with OEPE
Hi all,
I'm just curious, why JRockit doesn't exist in WebLogic Server installation (10.3.6) with Coherence + OEPE package installer (1.5 GB) ?
on the contrary, it exists in WebLogic Server (10.3.6) installation + Coherence without OEPE (820 MB) which is has smaller size.
I downloaded it from here :
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Need explanation please
Thank you,
Yusata.The OEPE package is more of a developers package and usually the HotSpot JVM is used for development.
Of course, you can also add JRockit separately and develop with JRockit (which is more of a server JVM).
The size increase is basically from the extra OEPE that is packaged in the bundle (the JVM packages themselves
are about 100M). -
Import package does not exist java
Hi ,
i try to compile as following
javac -cp "myapplication.jar:." modelapp.java
my batch file as follwong
set PATH=C:\Program Files\Java\jdk1.6.0_32\bin;C:\Users\DELL\Downloads\myfolder;C:\Users\DELL\Downloads\myfolder\edu;
set CLASSPATH=C:\Program Files\Java\jdk1.6.0_32\bin;C:\Users\DELL\Downloads\myfolder;C:\Users\DELL\Downloads\myfolder\edu;
cd C:\Users\DELL\Downloads\Stanfordnew
but the error appear as following
package edu.appli.machr. doesn't exist
import package edu.appli.machr. doesn't exist
i have already add the package to classpath
please help me in how can i solve this problem.
tHANKSjavac -cp "myapplication.jar:." modelapp.java You compile on Linux and run on Windows or something? That is the Linux classpath, on Windows the list separator is ; If you do everything on Windows I'm a bit amazed it worked.
set CLASSPATH=C:\Program Files\Java\jdk1.6.0_32\bin;C:\Users\DELL\Downloads\myfolder;C:\Users\DELL\Downloads\myfolder\edu;You made a copy/paste mistake, the classpath contains the path.
please help me in how can i solve this problem.Research what the classpath actually is. Google can easily provide you plenty of articles describing it. -
Java.math package does not exist!!!
hi java experts, i really desperately need some help. ihave been trying to compile a java program i have written that imports the java.math package as i am using the BigInteger class. I am using SUN ONE STUDIO ME 4 and have j2se SDk installed. when i try to build the program in the IDE, it gives me an error message saying the java.math package does not exist. i can't understand why. i think it's an IDE problem. i tried mounting the filesystem and i mounted almost a million times in diff ways but it still can't compile. i can't find the directory of the java.math to mount into. anyway i tried to compile it at the command prompt and it can compile but with errors... so i figure that i do have the java.math class on my system just that the IDE jsut can't recognise it. i am at my wits end and gonna go mad if someone doesn't please help me.
adeline from singaporeCross-posted at http://forum.java.sun.com/thread.jsp?thread=293132&forum=54&message=1155073
-
Import javax.mail package does not exists
Hi,
when i tried to compile the source code for email using jdk1.3.1, it compiled fine. but when i tried to compile using jdk1.4.., it had the following errors such as
import javax.mail package does not exists,
import javax.mail.internet package does not exists
package javax.activation does not exist
Is it because of the jdk version problem???
Pls help meI have the same problem with javax.ejb
Now i've downloaded and installed the j2ee and set my classpath to the j2ee.jar. I've had to make a new path cause i'm running XP.
This doesn't work.
to compile it in Jcreator or JBuilder I can make it work by adding this package (j2ee.jar) in the project settings - required libraries.
But I have to do this for every project again and again.
I can make it work but i thougt the classpath would be enough ??
Bassegio -
FM: RSDRO_READ_ODS_OLAP doesn't exists
Hi Experts,
We are Rampup Customer with SP7.
We are using a Function module RSDRO_READ_ODS_OLAP in one of the customized program. This FM doesn't exists in 2004s BI.
I found FM name in the Object Navigator (SE80)in Package RSDD under RSDRO_REPORT, When I double click on FM RSDRO_READ_ODS_OLAP it says FM doesn't exist.
Can anyone Suggest me, what is the status of this FM.
Is that Under development ? Obsolete or any alternate solution for this.
Thanks.
Swamy.Hi Swamy,
this function has vanished in 7.0. This is simply the risk that you take if you use internal calls.
I suggest that you look at the RSDRI_INFOPROV_READ. It is documented albeit also an SAP-internal API. However, it is more likely to remain stable.
If you are looking for a stable BAPI then consider the OLAP BAPI.
Hope this helps.
Thomas -
/etc/rc.d/tomcat doesn't exist! [solved]
I installed tomcat but /etc/rc.d/tomcat doesn't exist! What do I do from here?
Last edited by synthead (2008-09-12 22:51:23)I just found the problem. It will be fixed in the next tomcat package release (im packaging it already).
Thanks.
Last edited by hdoria (2008-09-11 23:07:05) -
Hi
I am trying to access OWB design browser but I am getting the following error in my Apache error logs.
/pls/wb_runtime_rep/wb_runtime_rep.wmp_api_call.home ORA-0
wb_runtime_rep.wmp_api_call.home: PROCEDURE DOESN'T EXIST
I configured DADS from the http server home page using
Mod_plsql Configuration Menu
My OC4J instance is running.
I checked for the user "wb_runtime_rep" there is no package "wmp_api_call".
Is this what I am missing ?I just checked the database sessions.
It is infact hitting the database with the repository username. -
/pls/apex/f HTTP-404 \nf: PROCEDURE DOESN'T EXIST\n
Hi,
I'm experiencing some troubles in migrating an apex application. This is my situation :
Currently, I have an apex application version 2.1 running on Oracle XE 10.2.0.1 (on linux).
The ultimate goal is to have an apex 3.0 application on oracle 10.2.0.3 using oracle HTTP Server (on aix). To achieve this, I'm trying to reinstall the full apex 2.1 into this new environment so only need to run the apexins.sql script when I want to update to 3.0.
These are the steps I took :
1. export/import users flows_files and flows_020100
2. Installed oracle HTML DB in a seperate Oracle home from the companion CD
3. Created dads.conf as follows
Alias /i/ "/oracle/app/oracle/product/HTTP/Apache/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString creyfsbup:1521:XEORAMON ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword <password>
Allow from all
</Location>
4. Restarted HTTP daemons
5. Navigated to http:\\creyfsbup:7779\pls\apex
This results in HTTP-404. This is an excerpt from my Apache error log :
[Thu Mar 22 14:40:11 2007] [error] [client 40.254.0.163] [ecid: 1174570811:172.25.154.161:4837422:0:93,0] mod_plsql: /pls/ape
x/f HTTP-404 \nf: PROCEDURE DOESN'T EXIST\n
Some observations :
* All objects are valid
* HTTP server (server:7779) is reachable
Am I missing some privileges/synonyms?
Is there something missing/wrong in my setup?
All feedback is more then welcome.
Best Regards,
Rik De VosRik,
You're not getting the SYS-owned package(s) that get installed with Application Express and you're not getting any of the grants to FLOWS_020100 and FLOW_FILES objects to PUBLIC (and maybe others). So I think your approach is not good.
Besides that, I'm not sure that when you install 3.0 it will be able to recognized FLOWS_020100 and upgrade from 2.1 to 3.0, if that is your plan.
Why don't you export your applications using the Application Export wizard and import them into one or more workspaces after you do a clean install of 3.0?
Scott
Maybe you are looking for
-
Export data from SAP Document Management System to File System(FileStore)
Hi, We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same. Thanks, Nilesh
-
Dear Gurus, Hi All, Please provide me the navigation to eliminate On-Account Credit amount from Receipt Screen (e.g.Recept #1). Business scenario is 1) I made receipt transaction Tk.10000 against a Customer Invoice TK. 8000 a (e.g. Invoice#1) . 2) I
-
I am in captivate 4 creating a simulation and for some reason when a page takes too long to open captivate is captures that page repeatedly. Other than manually capturing screens, is there another way to create simulations without Captivate automatic
-
Command key not working for copy and paste
Hi everyone!Copy and paste doesn't work when I use the command key on my new macbook pro.Any ideas how to fix this?If I use the toolbar it works fine
-
Remove an element in Arrays Object
If I only can use object Arrays, how can I perform remove element action?