Export data from SAP Document Management System to File System(FileStore)

Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
Nilesh

I'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.

Similar Messages

Tools available to extract documents from SAP document management system

Hi ,
Can anybody provide some valid information on
Tools available to extract the documents and their associated meta data from SAP Document Management system and DIR (Document Information Record) to non SAP document management sysyem ?
Thanks..

Hi,
On ALE / EDI interface, you can use Message DOCMAS for triggering the outbound IDocs, you can use Program: RBDSEDOC
For ALE / EDI Configuration, you can refer the book by Arvand Nagpal which is a step by step guide.
Hope this helps.
Best Regards, Murugesh AS

How to export data from a Dynpro table to Excel file?

Hi
Here I go again. I read the post <b>Looking for example to export data from a DynPro table to Excel file</b> and put the code lines into a Web Dynpro Project where we need to export a dynpro table to Excel file but exactly at line 23 it doesn't recognize <b>workBook = new HSSFWorkbook();</b>
1     //Declare this in the end between the Begin others block.
2
3     private FileOutputStream out = null;
4     private HSSFWorkbook workBook = null;
5     private HSSFSheet hsSheet = null;
6     private HSSFRow row = null;
7     private HSSFCell cell = null;
8     private HSSFCellStyle cs = null;
9     private HSSFCellStyle cs1 = null;
10     private HSSFCellStyle cs2 = null;
11     private HSSFDataFormat dataFormat = null;
12     private HSSFFont f = null;
13     private HSSFFont f1 = null;
14
15     //Code to create the Excel.
16
17     public void onActionExportToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
18     {
19     //@@begin onActionExportToExcel(ServerEvent)
20     try
21     {
22     out = new FileOutputStream("C:/mydirectory/myfiles/testexcel.xls");
23     workBook = new HSSFWorkbook();
24     hsSheet = workBook.createSheet("My Sheet");
25     cs = workBook.createCellStyle();
26     cs1 = workBook.createCellStyle();
27     cs2 = workBook.createCellStyle();
28     dataFormat = workBook.createDataFormat();
29     f = workBook.createFont();
30     f1 = workBook.createFont();
31     f.setFontHeightInPoints((short) 12);
32     // make it blue
33     f.setColor( (short)HSSFFont.COLOR_NORMAL );
34     // make it bold
35     // arial is the default font
36     f.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
37
38     // set font 2 to 10 point type
39     f1.setFontHeightInPoints((short) 10);
40     // make it red
41     f1.setColor( (short)HSSFFont.COLOR_RED );
42     // make it bold
43     f1.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
44     f1.setStrikeout(true);
45     cs.setFont(f);
46     cs.setDataFormat(dataFormat.getFormat("#,##0.0"));
47
48     // set a thick border
49     cs2.setBorderBottom(cs2.BORDER_THICK);
50
51     // fill w fg fill color
52     cs2.setFillPattern((short) HSSFCellStyle.SOLID_FOREGROUND);
53     cs2.setFillBackgroundColor((short)HSSFCellStyle.SOLID_FOREGROUND);
54     // set the cell format to text see HSSFDataFormat for a full list
55     cs2.setDataFormat(HSSFDataFormat.getBuiltinFormat("text"));
56     cs2.setFont(f1);
57     cs2.setLocked(true);
58     cs2.setWrapText(true);
59     row = hsSheet.createRow(0);
60     hsSheet.createFreezePane(0,1,1,1);
61     for(int i=1; i<10;i++)
62     {
63     cell = row.createCell((short)i);
64     cell.setCellValue("Excel Column "+i);
65     cell.setCellStyle(cs2);
66     }
67     workBook.write(out);
68     out.close();
69
70     //Read the file that was created.
71
72     FileInputStream fin = new FileInputStream("C:/mydirectory/myfiles/testexcel.xls");
73     byte b[] = new byte[fin.available()];
74     fin.read(b,0,b.length);
75     fin.close();
76
77     wdContext.currentContextElement().setDataContent(b);
78     }
79     catch(Exception e)
80     {
81     wdComponentAPI.getComponent().getMessageManager().reportException("Exception while reading file "+e,true);
82     }
83     //@@end
84     }
I don't know why this happen? Any information I will appreciate it.
Thanks in advance!!!
Tokio Franco Chang

After test the code lines appears this error stacktrace:
[code]
java.lang.NoClassDefFoundError: org/apache/poi/hssf/usermodel/HSSFWorkbook
     at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.ExportToExcel.onActionAct1(ExportToExcel.java:232)
     at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.wdp.InternalExportToExcel.wdInvokeEventHandler(InternalExportToExcel.java:147)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Thanks in advance!!!
Tokio Franco Chang
[/code]

Import/export data from ms sql 7 to xml file in a particular xpdl format

I'm trying to write java program to import/export data from ms sql 7 to xml file in a particular xpdl format. Can anyone suggest how to do it?

take a glance at what these guys do: http://www.openbusinessengine.org/docs/guide.html

Export data from SAP R/3 to Xcelsius

Dear Experts
Im new to Xcelsius, my requirement is to pass a data from sap r/3 database table to Xcelsius,
Is it possible to do this?
Thanks & Regards
Arun.P

Like Neel said, you need Live Office. Basically you will have to create a Crystal Report with the R3 Data and then use live office to fetch that data from Xcelsius. That means you will also be needing a BusinessObjects Enterprise Server.
Regards
Victor

Exporting data from database tables to a XML file

Hi,
We want to export data from Oracle database tables to an XML
file. What tool can we use for this purpose, and how do we go
about it ?
Can we extract data only from an Oracle8 database, or can we
extract data from Oracle7.3 databases too ?
Any help in this regard would be appreciated.
Thanks
Dipanjan
null

Dipanjan (guest) wrote:
: Hi,
: We want to export data from Oracle database tables to an XML
: file. What tool can we use for this purpose, and how do we go
: about it ?
: Can we extract data only from an Oracle8 database, or can we
: extract data from Oracle7.3 databases too ?
: Any help in this regard would be appreciated.
: Thanks
: Dipanjan
Start by downloading the XML SQL Utility and make sure you have
the approriate JDBC 1.1 drivers installed for your database.
There are samples which will get you going included in the
archive.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Issues in exporting data from SAP tables in SE16 to excel

1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.

1. I don't know. How about creating a pivot after exporting data
2. System->List->Save->local file->clipboard
Then paste whole lot in Excel
3. This is a problem with Excel, not SAP. SAP exports with leading zeroes.
You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format.

Looking for example to export data from a DynPro table to Excel file

Hello,
I have a certain content in a table.
I would like to export this content to Excel file and let the user save it on his PC. I tried to use the Office Controller but with no success.
Have someone already made something like this and can show me an example?

Hi
I already explained this in another post. Anyway i will cut and paste the same for you.Here you go.Sample way to create a Excel file and then download it to a local pc using a FileUI Download element.
We are developing a generic component for the same requirement which will download data to a excel from any table.
Anyway here is something which will give you some kind of idea as to how you can write the data from WebDynpro to a excel file.
For running this application
Ensure that the requisite JAR files are set for the Excel API's. See the blog link below.
Steps :
All your files in the machine running the WAS will be created in the default location
Alias : webdynpro/resources
Path : <Drive>:/usr/sap/J2E/JC00/j2ee/cluster/server0/temp/webdynpro/web
You can open your Visual Administrator and go to HTTP provider service and then create your own Alias. say
Alias : myAlias
Path : <Drive>:/mydirectory/myfiles
Once this is done restart your WebAS.
The code explained will perform the following.
There is a button UI element and a Download UI element. On click of the Action associated with the button ui element
The code below will create a excel file in the location mentioned.
On click of the download UI element you can view the excel file that was created.
Now create a New project in your NWDS
Follow the blog for importing the necessary jar files for Excel
/people/perumal.kanthan/blog/2005/03/21/reading-excel-data-from-java-using-hssf-api
Once that is done you can create say a button in your Webdynpro and associate it with a action.
Then you can write some code like the one below.
//Declare this in the end between the Begin others block.
private FileOutputStream out = null;
private HSSFWorkbook workBook = null;
private HSSFSheet hsSheet = null;
private HSSFRow row = null;
private HSSFCell cell = null;
private HSSFCellStyle cs = null;
private HSSFCellStyle cs1 = null;
private HSSFCellStyle cs2 = null;
private HSSFDataFormat dataFormat = null;
private HSSFFont f = null;
private HSSFFont f1 = null;
//Code to create the Excel.
public void onActionExportToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionExportToExcel(ServerEvent)
    try
      out = new FileOutputStream("C:/mydirectory/myfiles/testexcel.xls");
      workBook = new HSSFWorkbook();
      hsSheet = workBook.createSheet("My Sheet");
      cs = workBook.createCellStyle();
      cs1 = workBook.createCellStyle();
      cs2 = workBook.createCellStyle();
      dataFormat = workBook.createDataFormat();
      f = workBook.createFont();
      f1 = workBook.createFont();
       f.setFontHeightInPoints((short) 12);
//          make it blue
       f.setColor( (short)HSSFFont.COLOR_NORMAL );
//           make it bold
//          arial is the default font
       f.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
//          set font 2 to 10 point type
       f1.setFontHeightInPoints((short) 10);
//          make it red
       f1.setColor( (short)HSSFFont.COLOR_RED );
//          make it bold
       f1.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
      f1.setStrikeout(true);
      cs.setFont(f);
      cs.setDataFormat(dataFormat.getFormat("#,##0.0"));
//       set a thick border
     cs2.setBorderBottom(cs2.BORDER_THICK);
//       fill w fg fill color
     cs2.setFillPattern((short) HSSFCellStyle.SOLID_FOREGROUND);
    cs2.setFillBackgroundColor((short)HSSFCellStyle.SOLID_FOREGROUND);
//       set the cell format to text see HSSFDataFormat for a full list
     cs2.setDataFormat(HSSFDataFormat.getBuiltinFormat("text"));
     cs2.setFont(f1);
     cs2.setLocked(true);
     cs2.setWrapText(true);
     row = hsSheet.createRow(0);
     hsSheet.createFreezePane(0,1,1,1);
    for(int i=1; i<10;i++)
       cell = row.createCell((short)i);
      cell.setCellValue("Excel Column "+i);
      cell.setCellStyle(cs2);
     workBook.write(out);
     out.close();
//Read the file that was created.
     FileInputStream fin = new FileInputStream("C:/mydirectory/myfiles/testexcel.xls");
     byte b[] = new byte[fin.available()];
     fin.read(b,0,b.length);
     fin.close();
     wdContext.currentContextElement().setDataContent(b);
    catch(Exception e)
      wdComponentAPI.getComponent().getMessageManager().reportException("Exception while reading file "+e,true);
    //@@end
You can now add a Download UI Element to the layout.
Create a Context Attribute say "dataContent" and this should be of Type Binary.
The Data property of the File UI download element should be mapped to dataContent.
In the init method write code like
This is done for the download element.
     IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute("dataContent");
     IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
//In addition the FileDownload UI element needs for defined resource types
     binaryType.setFileName("testexcel.xls");
     binaryType.setMimeType(WDWebResourceType.XLS);
Hope that helps you. Anyway its a sample and it should be helpful for you to see how you can modify it and of course maintain some standards in coding unlike the test sample given above :).
Let me know if you require further clarifications
regards
ravi

How to export data from a string to a CSV file

Hello,
i do have a string in a Livecycle Designer script object with a couple of rows with different entries divided by a semicolon:
COLUMN1;COLUMN2;COLUMN3
Entry1;Entry2;Entry3
Entry4;Entry5;Entry6
The goal is now to export this string from Livecycle Designer into a CSV file by clicking a button. Is there any solution suggested?
Thank you very much.

Hi,
You can try creating a dataObject and then exporting it, you might get some warning messages popup but try this;
var csvData = "COLUMN1;COLUMN2;COLUMN3\r\n";
csvData += "Entry1;Entry2;Entry3\r\n";
csvData += "Entry4;Entry5;Entry6\r\n";
var pdf = event.target;
pdf.createDataObject("Data.csv", csvData);
pdf.exportDataObject({cName: "Data.csv"});
If you replace the last line with
pdf.exportDataObject({cName: "Data.csv", nLaunch: 2});
It will open in whatever .csv is registered for (Excel on my system)
Regards
Bruce

Exporting data from a jsp to a text file...

Hi all.
I have a jsp which displays a set of results in a tablular form....my clients now want me to include a button in this jsp page on clicking which i will be abl�e to export the entire data from the displayed page to a text file
can anyone suggest me as to how to go about it...
thanks

Server side code(lets say servlet named exportServlet) behind the button can retreive the data in the same fashion as done for displaying on the JSP.
But then, exportServlet writes data back on the HTTP response using the mime type application/octet-stream.
See Javadoc for javax.servlet.ServletResponse.setContentType()

How to get purchasing data from SAP R/3 to Flat files

Hi,
Please can anyone help me to get the data from Purchasing extractors (2LIS_02_ITM, 2LIS_02_SCL, 2LIS_02_S012) to flat files? Here we dont want to load data from R/3 to BW for reporting, wanted to load data from flat files to OWB (Oracle warehouse builder) for reporting. So Is there anyway to generate data into flat files from Purchasing extractors (Full and deltas)?
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

Exporting data from Oracle to an existing Excel file

Hi,
I want to know if it is possible to open up an excel file on the server (with the necessary lay-out) and to write the query results in it?
Another remark: the file needs to be saved under a different name (we use the user name as part of the files since the file will be sent through email rather than be displayed on the user's screen)

If you are satisfied with a straight dump, you might want to use utl_file to make a standard CSV-file.
If you need a little more control of the layout, you might want to check out the SYLK file format (quite ancient)
These require no Excel application and works on UNIX servers too. If you really have to have the full magic (on a Win32 platform) you could try using Jacob or some other Java-COM-bridge to launch the Excel-application and enter the values into the worksheet but this falls into the "duct tape and chewing gum"-category of stability in my opinion...

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

Export data from ABAP report to SAP BW system

Hi Everyone,
I have requirement to export data from the R/3 system from a ABAP report to BW system.
Currently we are planning to create a Ztable to put the data into that, but I would like to know , is there a better way to do instead of going for a Ztable.
Regards,
Shobana.K

Hi Shobana,
is possible define a data-source in RSO2 with Function module as source.
In this function module you define a table. During the loading data in BW from this datasource the system execute this function module and transfer the line of that table.
In the function module you can repeat the code of the abap program.
You can see the function module example (RSAX_BIW_GET_DATA_SIMPLE).
Regards.
Paolo Ardemagni

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

Export data from SAP Document Management System to File System(FileStore)

Similar Messages

Maybe you are looking for