Pacman -Qe Broken after today´s "full system upgrade"
From "pacman.log"
synchronizing package lists
[2008-01-17 18:04] starting full system upgrade
[2008-01-17 18:05] upgraded gnome-keyring (2.20.2-1 -> 2.20.3-1)
[2008-01-17 18:06] >>>
[2008-01-17 18:06] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
[2008-01-17 18:06] >>>
[2008-01-17 18:06] >>> Updating module dependencies. Please wait ...
[2008-01-17 18:06] >>> MKINITCPIO SETUP
[2008-01-17 18:06] >>> ----------------
[2008-01-17 18:06] >>> If you use LVM2, Encrypted root or software RAID,
[2008-01-17 18:06] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2008-01-17 18:06] >>> More information about mkinitcpio setup can be found here:
[2008-01-17 18:06] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2008-01-17 18:06]
[2008-01-17 18:06] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2008-01-17 18:06] ==> Building image "default"
[2008-01-17 18:06] ==> Running command: /sbin/mkinitcpio -k 2.6.23-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2008-01-17 18:06] :: Begin build
[2008-01-17 18:06] :: Parsing hook [base]
[2008-01-17 18:06] :: Parsing hook [autodetect]
[2008-01-17 18:06] :: Generating module dependencies
[2008-01-17 18:06] :: Generating image '/boot/kernel26.img'...SUCCESS
[2008-01-17 18:06] ==> SUCCESS
[2008-01-17 18:06] ==> Building image "fallback"
[2008-01-17 18:06] ==> Running command: /sbin/mkinitcpio -k 2.6.23-ARCH -c /etc/mkinitcpio.d/kernel26-fallback.conf -g /boot/kernel26-fallback.img
[2008-01-17 18:06] :: Begin build
[2008-01-17 18:06] :: Parsing hook [base]
[2008-01-17 18:06] :: Parsing hook [udev]
[2008-01-17 18:06] :: Parsing hook [ide]
[2008-01-17 18:06] :: Parsing hook [pata]
[2008-01-17 18:06] :: Parsing hook [scsi]
[2008-01-17 18:06] :: Parsing hook [sata]
[2008-01-17 18:06] :: Parsing hook [usbinput]
[2008-01-17 18:06] :: Parsing hook [raid]
[2008-01-17 18:06] :: Parsing hook [filesystems]
[2008-01-17 18:07] :: Generating module dependencies
[2008-01-17 18:07] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2008-01-17 18:07] ==> SUCCESS
[2008-01-17 18:07] upgraded kernel26 (2.6.23.12-3 -> 2.6.23.14-1)
[2008-01-17 18:07] upgraded libgtop (2.20.0-1 -> 2.20.1-1)
[2008-01-17 18:07] upgraded libwnck (2.20.2-1 -> 2.20.3-1)
[2008-01-17 18:07] upgraded vte (0.16.11-1 -> 0.16.12-1)
[2008-01-17 18:07] upgraded xorg-xinit (1.0.7-2 -> 1.0.7-3)
Result when using "pacman -Qe" afterwards.
pacman -Qe
alsa-lib 1.0.15-1
alsa-oss 1.0.15-1
alsa-plugins 1.0.15-1
alsa-utils 1.0.15-2
autoconf 2.61-3
automake 1.10-3
bin86 0.16.17-3
bison 2.3-4
bzip2 1.0.4-3
catfish 0.3-1
ccsm 0.6.0-2
compiz-fusion-plugins-extra 0.6.0-2
compiz-fusion-plugins-main 0.6.0-3
compizconfig-backend-gconf 0.6.0-2
conky 1.4.9-1
cpio 2.9-3
csup 20060318-5
curl 7.17.1-1
dbus 1.0.2-4
e2fsprogs 1.40.3-1
ed 0.8-3
emerald 0.6.0-3
emerald-themes 0.6.0-2
epdfview 0.1.6-5
exo 0.3.4-1
fcron 3.0.4-1
file 4.23-1
filesystem 2007.11-3
findutils 4.2.31-3
firefox 2.0.0.11-1
flashplugin 9.0.115.0-1
flex 2.5.33-3
fusion-icon 20071111-1
galculator 1.3.1-1
gawk 3.1.6-2
gettext 0.17-1
gksu 2.0.0-2
gnome-icon-theme 2.20.0-1
gqview 2.0.4-1
grep 2.5.3-3
groff 1.19.2-3
grub 0.97-9
gtk-xfce-engine 2.4.2-1
gzip 1.3.12-4
hardinfo 0.4.2.3-1
hdparm 7.7-3
hwd 5.3.1-1
hwdetect 0.9-1
initscripts 2007.11-2
iptables 1.3.8-2
iputils 20070202-3
jacman 0.4-2
jre 6u3-2
kbd 1.12.20070827-2
kernel26 2.6.23.14-1
less 418-1
libdca 0.0.5-1
libpcap 0.9.8-2
libtool 1.5.24-3
libusb 0.1.12-3
libxfce4mcs 4.4.2-1
libxfce4util 4.4.2-1
libxfcegui4 4.4.2-1
licenses 2.2-2
lilo 22.8-2
lshwd 1.1.3-5
lzo2 2.02-3
lzop 1.02rc1-3
make 3.81-3
man 1.6f-1
man-pages 2.74-1
mc 4.6.1-4
mesa 7.0.1-1
mkinitcpio 0.5.17-1
mktemp 1.5-3
mlocate 0.18-2
module-init-tools 3.2.2-5
mousepad 0.2.13-1
mplayer 1.0rc2-1
mplayer-plugin 3.45-1
nano 2.0.7-1
net-tools 1.60-13
numlockx 1.1-3
nvidia-96xx 96.43.01-6
openal 0.0.8-4
openssl 0.9.8g-2
pacman 3.1.0-1
pacworld 0.3.4-2
patch 2.5.4-4
pcmciautils 014-3
pidgin 2.3.1-1
pkgconfig 0.22-3
ppp 2.4.4-6
procinfo 19-2
procps 3.2.7-4
psmisc 22.6-1
pyqt4 4.3.3-1
pyxdg 0.15-1
qca 1.0-3
qca-tls 1.0-3
rarian 0.6.0-1
reiserfsprogs 3.6.20-3
rp-pppoe 3.8-2
rpmextract 0-1
schismtracker 0.5rc1-1
scite 1.75-1
sdl_image 1.2.6-1
sdl_mixer 1.2.8-1
seamonkey 1.1.5-2
skype 2.0.0.27-1
slim 1.3.0-2
slim-themes 1.2.3-2
squeeze 0.2.2-1
sudo 1.6.9p10-3
syslog-ng 2.0.6-1
sysvinit 2.86-4
tar 1.19-2
terminal 0.2.8-1
terminatorx 3.82-1
thunar 0.9.0-2
thunar-archive-plugin 0.2.4-5
thunar-volman 0.2.0-1
ttf-ms-fonts 2.0-1
tuxcards 2.0-1
udev 116-3
unclutter 8-4
unrar 3.7.8-1
unzip 5.52-3
util-linux-ng 2.13.0.1-2
vim 7.1.156-1
vlc 0.8.6d-1
wget 1.10.2-4
which 2.17-2
xcursor-grounation 0.3-5
xfce-mcs-manager 4.4.2-1
xfce-mcs-plugins 4.4.2-1
xfce-utils 4.4.2-1
xfce4-appfinder 4.4.2-1
xfce4-cpugraph-plugin 0.4.0-1
xfce4-genmon-plugin 3.1-4
xfce4-icon-theme 4.4.2-1
xfce4-mixer 4.4.2-1
xfce4-netload-plugin 0.4.0-4
xfce4-panel 4.4.2-1
xfce4-screenshooter-plugin 1.0.0-5
xfce4-session 4.4.2-1
xfce4-taskmanager 0.3.2-4
xfdesktop 4.4.2-1
xfprint 4.4.2-1
xfwm4 4.4.2-1
xfwm4-themes 4.4.2-1
xmms 1.2.11-1
xorg-fonts-type1 1.0.1-1
xorg-twm 1.0.1-2
xterm 229-2
zip 2.32-1
WEIRD, BUG or ???
After reading your reply, I checked "man pacman" and it changed as you said!
so I did a "pacman -Qt" to look for orphans and this is the result.
alsa-oss 1.0.15-1
alsa-plugins 1.0.15-1
alsa-utils 1.0.15-2
autoconf 2.61-3
automake 1.10-3
bin86 0.16.17-3
bison 2.3-4
catfish 0.3-1
ccsm 0.6.0-2
compiz-fusion-plugins-extra 0.6.0-2
compizconfig-backend-gconf 0.6.0-2
conky 1.4.9-1
csup 20060318-5
docbook-xml 4.5-1
emerald-themes 0.6.0-2
epdfview 0.1.6-5
findutils 4.2.31-3
firefox 2.0.0.11-1
flashplugin 9.0.115.0-1
flex 2.5.33-3
fusion-icon 20071111-1
galculator 1.3.1-1
gettext 0.17-1
gksu 2.0.0-2
gnome-icon-theme 2.20.0-1
gqview 2.0.4-1
grub 0.97-9
gtk-xfce-engine 2.4.2-1
hardinfo 0.4.2.3-1
hdparm 7.7-3
hwd 5.3.1-1
hwdetect 0.9-1
initscripts 2007.11-2
iptables 1.3.8-2
iputils 20070202-3
jacman 0.4-2
kbd 1.12.20070827-2
libsigc++2.0 2.1.1-1
libtool 1.5.24-3
licenses 2.2-2
lilo 22.8-2
lshwd 1.1.3-5
lzo 1.08-4
lzop 1.02rc1-3
make 3.81-3
man 1.6f-1
man-pages 2.74-1
mc 4.6.1-4
mlocate 0.18-2
mousepad 0.2.13-1
mplayer-plugin 3.45-1
nano 2.0.7-1
numlockx 1.1-3
nvidia-96xx 96.43.01-6
openal 0.0.8-4
pacman 3.1.0-1
pacworld 0.3.4-2
patch 2.5.4-4
pcmciautils 014-3
pidgin 2.3.1-1
pkgconfig 0.22-3
procinfo 19-2
psmisc 22.6-1
pyqt4 4.3.3-1
qca-tls 1.0-3
reiserfsprogs 3.6.20-3
rp-pppoe 3.8-2
rpmextract 0-1
schismtracker 0.5rc1-1
scite 1.75-1
sdl_image 1.2.6-1
sdl_mixer 1.2.8-1
seamonkey 1.1.5-2
skype 2.0.0.27-1
slim-themes 1.2.3-2
squeeze 0.2.2-1
sudo 1.6.9p10-3
syslog-ng 2.0.6-1
sysvinit 2.86-4
tar 1.19-2
terminal 0.2.8-1
terminatorx 3.82-1
thunar-archive-plugin 0.2.4-5
thunar-volman 0.2.0-1
ttf-ms-fonts 2.0-1
tuxcards 2.0-1
unclutter 8-4
unrar 3.7.8-1
unzip 5.52-3
vim 7.1.156-1
vlc 0.8.6d-1
which 2.17-2
xcursor-grounation 0.3-5
xf86-input-keyboard 1.2.2-2
xf86-input-mouse 1.2.3-1
xf86-video-vesa 1.3.0-5
xfce-mcs-plugins 4.4.2-1
xfce-utils 4.4.2-1
xfce4-appfinder 4.4.2-1
xfce4-cpugraph-plugin 0.4.0-1
xfce4-genmon-plugin 3.1-4
xfce4-icon-theme 4.4.2-1
xfce4-mixer 4.4.2-1
xfce4-netload-plugin 0.4.0-4
xfce4-screenshooter-plugin 1.0.0-5
xfce4-session 4.4.2-1
xfce4-taskmanager 0.3.2-4
xfdesktop 4.4.2-1
xfprint 4.4.2-1
xfwm4-themes 4.4.2-1
xmms 1.2.11-1
xorg-fonts-type1 1.0.1-1
xorg-twm 1.0.1-2
xorg-xinit 1.0.7-3
xterm 229-2
zip 2.32-1
It shows less packages, yet this are not orphans :-(
Also in "man pacman" it says "(-Qet is equivalent to the pacman 2.9.X -Qe option.)"
pacman -Qet
alsa-oss 1.0.15-1
alsa-plugins 1.0.15-1
alsa-utils 1.0.15-2
autoconf 2.61-3
automake 1.10-3
bin86 0.16.17-3
bison 2.3-4
catfish 0.3-1
ccsm 0.6.0-2
compiz-fusion-plugins-extra 0.6.0-2
compizconfig-backend-gconf 0.6.0-2
conky 1.4.9-1
csup 20060318-5
emerald-themes 0.6.0-2
epdfview 0.1.6-5
findutils 4.2.31-3
firefox 2.0.0.11-1
flashplugin 9.0.115.0-1
flex 2.5.33-3
fusion-icon 20071111-1
galculator 1.3.1-1
gettext 0.17-1
gksu 2.0.0-2
gnome-icon-theme 2.20.0-1
gqview 2.0.4-1
grub 0.97-9
gtk-xfce-engine 2.4.2-1
hardinfo 0.4.2.3-1
hdparm 7.7-3
hwd 5.3.1-1
hwdetect 0.9-1
initscripts 2007.11-2
iptables 1.3.8-2
iputils 20070202-3
jacman 0.4-2
kbd 1.12.20070827-2
libtool 1.5.24-3
licenses 2.2-2
lilo 22.8-2
lshwd 1.1.3-5
lzop 1.02rc1-3
make 3.81-3
man 1.6f-1
man-pages 2.74-1
mc 4.6.1-4
mlocate 0.18-2
mousepad 0.2.13-1
mplayer-plugin 3.45-1
nano 2.0.7-1
numlockx 1.1-3
nvidia-96xx 96.43.01-6
openal 0.0.8-4
pacman 3.1.0-1
pacworld 0.3.4-2
patch 2.5.4-4
pcmciautils 014-3
pidgin 2.3.1-1
pkgconfig 0.22-3
procinfo 19-2
psmisc 22.6-1
pyqt4 4.3.3-1
qca-tls 1.0-3
reiserfsprogs 3.6.20-3
rp-pppoe 3.8-2
rpmextract 0-1
schismtracker 0.5rc1-1
scite 1.75-1
sdl_image 1.2.6-1
sdl_mixer 1.2.8-1
seamonkey 1.1.5-2
skype 2.0.0.27-1
slim-themes 1.2.3-2
squeeze 0.2.2-1
sudo 1.6.9p10-3
syslog-ng 2.0.6-1
sysvinit 2.86-4
tar 1.19-2
terminal 0.2.8-1
terminatorx 3.82-1
thunar-archive-plugin 0.2.4-5
thunar-volman 0.2.0-1
ttf-ms-fonts 2.0-1
tuxcards 2.0-1
unclutter 8-4
unrar 3.7.8-1
unzip 5.52-3
vim 7.1.156-1
vlc 0.8.6d-1
which 2.17-2
xcursor-grounation 0.3-5
xfce-mcs-plugins 4.4.2-1
xfce-utils 4.4.2-1
xfce4-appfinder 4.4.2-1
xfce4-cpugraph-plugin 0.4.0-1
xfce4-genmon-plugin 3.1-4
xfce4-icon-theme 4.4.2-1
xfce4-mixer 4.4.2-1
xfce4-netload-plugin 0.4.0-4
xfce4-screenshooter-plugin 1.0.0-5
xfce4-session 4.4.2-1
xfce4-taskmanager 0.3.2-4
xfdesktop 4.4.2-1
xfprint 4.4.2-1
xfwm4-themes 4.4.2-1
xmms 1.2.11-1
xorg-fonts-type1 1.0.1-1
xorg-twm 1.0.1-2
xterm 229-2
zip 2.32-1
Now I am lost, hahhahahahahaahahahahahaha
Similar Messages
-
[SOLVED]pacman.log filled with "[PACMAN] starting full system upgrade"
Today i just ran pacman -Suy, but now the log is filled with:
Gozer ~ # tail /var/log/pacman.log -n 100
[2013-04-08 12:26] [PACMAN] upgraded youtube-dl (2013.02.25-1 -> 2013.04.03-1)
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 13:06] [PACMAN] starting full system upgrade
Gozer ~ # grep '2013-04-08' /var/log/pacman.log |grep "starting full system upgrade" | wc -l
637
Is this a bug?
Last edited by kokoko3k (2013-04-08 12:57:01)Edit: are you using some system update monitoring script?
Ops... big "OPS".
You are right, sorry! -
[SOLVED] GNOME is messed up after full system upgrade
I ran a full system upgrade today (last one was about 1-2 months ago) and it went smoothly.
Everything boots normally, and my default GNOME desktop also boots, but all the icons are messed up, as can be seen in this screenshot.
And worst, the overlay panel (e.g. when pressing the Windows key) is completely b0rked and unusable.
The GNOME desktop is the default one with no modifications that I know of. I tried searching for existing issues but didn't find any.
I'm running Intel Graphics on:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Any ideas?
Last edited by yuvadm (2014-03-06 10:03:30)While typing the post, I bumped into https://wiki.archlinux.org/index.php/Gn … ncorrectly
After setting and re-setting my monitor resolution, things seem to fall back into place.
Looks like I'll use the scaling factor hack for a permanent fix. -
[solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected
Hi, following this post, I'm seeking help concerning a big problem with my wifi.
In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
Last edited by nugetchar (2014-08-09 20:30:44)Okay then, here we go :
When I do a
lspci
I have the following output :
[nugetchar@arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
So, as you can see, the Network Controller is the following :
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
When I do a
ip link
this is what I obtain :
[nugetchar@arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
Finally, a
more /etc/modprobe.d/modprobe.conf
gives me the following output :
^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist bcma
blacklist pcspkr
blacklist snd_pcsp
I think I need to unblacklist bcma ?
@ewaller : I just saw you reply, here is the output for ls /lib/modules
[nugetchar@arch ~]$ ls /lib/modules
3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
Thank you for your answers, I really appreciate it -
X do not start after full system upgrade - [SOLVED]
hi all,
i did a full system upgrade yesterday, and after that, arch doesn't start..
the error itself:
X: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
any help on this? want to get off of bloated ubuntu
installed packages: http://pastebin.archlinux.org/15106
Last edited by ivan (2007-09-25 13:49:57)I have the same issue also. Something told me not to reboot but I did because I wanted to use my rt-kernel.
yes, please help because I too have to use Ubuntu-Studio and SuSE's JAD. Both way too bloated and not as fast as Arch..
I tried to fix the xorg.conf but nothing. -
[Solved] Full system upgrade fails because of Nvidia dependencies
Problem:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
Things I have tried:
$ makepkg -s
==> Making package: nvidia-dkms 346.47-1 (Sun Mar 1 11:42:11 PST 2015)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for digger:
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
==> ERROR: 'pacman' failed to install missing dependencies.
# pacman -R nvidia-utils
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-dkms: requires nvidia-utils=346.35
:: nvidia-libgl: requires nvidia-utils
Some info:
$ uname -a
Linux <hostname> 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
# dkms status
nvidia, 346.35, 3.18.5-1-ARCH, x86_64: installed
nvidia, 346.35, 3.18.6-1-ARCH, x86_64: installed
$ lspci -k | grep -A 2 -i "VGA"
03:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 640] (rev a1)
Subsystem: eVga.com. Corp. Device 2643
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Subsystem: eVga.com. Corp. Device 2643
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
# pacman -Ss nvidia | grep installed
extra/libvdpau 0.9-1 [installed]
extra/nvidia-libgl 346.47-2 [installed: 346.35-2]
extra/nvidia-utils 346.47-2 [installed: 346.35-2]
# cat /etc/mkinitcpio.conf | grep ^HOOKS
HOOKS="base udev autodetect modconf block lvm2 nvidia filesystems keyboard fsck"
# systemctl status dkms
● dkms.service - Dynamic Kernel Modules System
Loaded: loaded (/usr/lib/systemd/system/dkms.service; enabled; vendor preset: disabled)
Active: active (exited) since Sun 2015-03-01 11:40:15 PST; 1h 43min ago
Process: 6196 ExecStart=/usr/lib/systemd/scripts/dkms start (code=exited, status=0/SUCCESS)
Main PID: 6196 (code=exited, status=0/SUCCESS)
CGroup: /system.slice/dkms.service
# pacman -Qm | grep nvidia
nvidia-dkms 346.35-2
nvidia-hook 2.2-3
Let me know if any other information is needed.
Thanks.
Last edited by digger (2015-03-03 03:12:52)The fix, thanks to Xabre
# pacman -R nvidia-dkms
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-hook: requires nvidia-dkms
# pacman -Rs nvidia-dkms
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia-hook: requires nvidia-dkms
[root@big-kahuna ~]# pacman -Rdd nvidia-dkms
Packages (1) nvidia-dkms-346.35-2
Total Removed Size: 12.29 MiB
:: Do you want to remove these packages? [Y/n] Y
-------- Uninstall Beginning --------
Module: nvidia
Version: 346.35
Kernel: 3.18.5-1-ARCH (x86_64)
Status: Before uninstall, this module version was ACTIVE on this kernel.
nvidia.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
nvidia-uvm.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod....
DKMS: uninstall completed.
-------- Uninstall Beginning --------
Module: nvidia
Version: 346.35
Kernel: 3.18.6-1-ARCH (x86_64)
Status: Before uninstall, this module version was ACTIVE on this kernel.
nvidia.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
nvidia-uvm.ko:
- Uninstallation
- Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod.....
DKMS: uninstall completed.
Deleting module version: 346.35
completely from the DKMS tree.
Done.
(1/1) removing nvidia-dkms [######################] 100%
# pacman -Syu ### This ran as expected.
All I wanted was to have the simplest use of the Nvidia proprietary driver. So I followed https://wiki.archlinux.org/index.php/NV … any_kernel
So what I gather from the discussion here is that this (nvidia-dkms) should only be used for custom kernels? And the topic should be a sub topic of https://wiki.archlinux.org/index.php/NV … tom_kernel? Is that right?
Thanks for you help.
Last edited by digger (2015-03-03 03:11:58) -
[SOLVED] Starting Full System Upgrade... There Is Nothing To Do
"Starting Full System Upgrade... There Is Nothing To Do" is the only message I have ever seen when using pacman -Syu. I have no problem installing files but pacman cannot seem to EVER find updates to anything. Even when I know that a package has been updated in the repositories, pacman never acknowledges it. Some examples of applications are:
Python2 - Installed - 2.6.5-3, Available - 2.7.1-4
Geany - Installed 0.19-1, Available - 0.20-1
Pacman - Installed 3.4.0-2, Available - 3.4.2-1
Even if I try to specify the repository, for Geany for instance, "pacman -S community/geany", it still sees it as up-to-date.
It's quite possible that I'm going about something the wrong way but I don't ever recall the system actually finding updates (since June). My pacman.conf looks as follows:
MOD EDIT -- Please use code tags to display any output and of files -- Inxsible
Any help would be greatly appreciated.
Last edited by 24sHD (2011-01-13 15:55:34)Also try to read the wiki about pacman and mirrorlist. Simply uncommenting multiple mirrors does not give you the ability to get packages from all of them. pacman will connect to each one in order. If it can connect to the first one and see that pacman is available it does not connect to the next mirror to see if some other mirror has an updated version of not.
It connects to the next mirror if and only if a certain package is not available on the first mirror or the mirror itself is down. -
Starting full system upgrade... there is nothing to do
Just finished my Install of Arch and I can't seem to update anything it just gives me "Starting full system upgrade...
there is nothing to do"
I tried pacman -Syy and it syncs my repos and I've checked and I do have packages that are out of date so they should upodate. My mirrors are also not out of date, I just checked themPlease paste the pull output pacman -S openbox. I think you'll find something along the lines of:
warning: openbox-3.5.0-7 is up to date -- reinstalling
The following will tell you which version you have installed
$ pacman -Q openbox
The current version is 3.5.0-7, which you can see here: https://www.archlinux.org/packages/comm … 4/openbox/ -
Dependancy trouble when performing full system upgrade
Below is the output from pacman:
:: Starting full system upgrade...
:: Replace esd with extra/esound? [Y/n] y
:: Replace synaptics with extra/xf86-input-synaptics? [Y/n] y
resolving dependencies...
warning: dependency cycle detected:
warning: xorg-server will be installed before its catalyst-utils dependency
looking for inter-conflicts...
warning: removing 'libgl' from target list because it conflicts with 'catalyst-utils'
error: failed to prepare transaction (could not satisfy dependencies)
:: xf86-video-ati: requires libgl>=7.2
Checked the news and theads on here and not seen anyone with simular problems so I'm really not quite sure how to tackle this one...sorry, i should have added a bit more detail about my setup:
it's an ASUS X51RL-series laptop. It has an ATI radeon xpress 1100 GFX chip.
I'm running KDE4 + compiz-fusion
I'm guessing the problem is related to the xorg upgrade? Beyond that I'm not sure how best to address the dependances. -
I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.
Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC). -
Unable to boot after Time Machine full system restore!!
I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried booting up in safe made, also no dice. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.
Hi coldengray
Did you try to start from your System-CD? Hold down C-key during startup, start DiskUtility from the menu and verify/repair disk and permissions there.
If the CD is not available you can also connect your TimeMachine-Disk, select it as startup volume in System Preferences/StartupDisk, restart and then run DiskUtility from folder Applications/Utilities
Good luck P -
Mail Message Restore Stuck after completing a full system restore
I just completed a full system restore on my Macbook Pro using the "Restore From Backups" function. Upon the first boot up, I was greeted with a "Mail Message Import" Dialog Box asking to import my messages. It began importing alot of my folders but then became stuck on the "Deleted Messages" folder with 4500 out of 7000 messages already imported. The progress bar sits and never moves and the Time remaining amount begins to increase and increase. I have the option to cancel and if I do cancel and attempt to open Mail again, then I must complete the process over again. Ultimately becoming stuck at the same point of the import process each time.
FYI
I have 5 email accounts set up (one iMap) on this machine.
Where is this being imported from?
Can I point it to another backup directory?
Any Help is much appreciated.
THanks,Thanks Man! That WOrked!!!!! Your the best! and Thank you for those Kind words! Happy MacBooking!!
-
INDesgin image links broken after saving file across systems
Hi
We have a scenario involving 3 components:
1. Linux file server running both SMB and AFP (sharing the same directory thru both protocols)
2. MacOS 10.5 (Leopard) with INDesign CS3 connecting to the Linux server thru AFP
3. Windows 2003 server running INDesign CS3 connecting to the Linux server thru SMB (or NFS)
The scenario:
1. We create an INDD document and link an image to the AFP share (on the linux)
2. On the windows 2003 server we open the same document from the SMB share (on the linux) - no error/broken links message is received.
3. We save the document with a irrelevant to images change, (eg. Adding a text block) to the SMB share
Here is the problem:
4. We open the document on the MacOS and receive "Broken links" message atlhough when you look at the path of the image you see the correct AFP path (needless to mention the path is mounted on the MacOS properly and the images are fully accessible)
What can we do, so we will not receive a broken links popup on step #4 of the scenario?
ThanksNo answers, but a few questions:
Just to be clear, by "broken" you mean missing, not in need of updating, right?
What version of netatalk are you using on the Linux box? Does it implement AFP 3?
What version of InDesign CS3 are you using? Is it fully patched to the last public version (5.0.4.682) or newer?
Are there any potentially problematic characters (e.g., slashes, backslashes, unicode characters, etc.) in the file names or the directories in the full paths?
If you make note of the full path on the Mac when the document is first created, and then compare it very carefully with the same path when you re-open it and get the broken links messages, can you detect any differences? It might also be interesting to place one of the same "missing" images in the document again once you've re-opened it on the Mac, and compare the two paths... -
Full System Upgrade: pacman -Syyu
When I use that command, it asks me if I want to replace iwiwfi and rt2x00-cvs with kernel26. Am I supposed to hit yes on these? Cause when I do it can't resolve the dependencies because archboot used both of them. So I am trying it with no while I wait for a response. Thanks in advance.
You should file a bug for archboot. It should no longer depend on these packages as they a build into the kernel.
My suggestion:
pacman -R archboot
pacman -Syu
pacman -Sd archboot
That will remove archboot, upgrade your system and install archboot while ignoring dependancy problems. -
[ANN] script to show pacman full system upgrade in SVG picture
I just wonder how eager I upgrade my full arch system.
So, I've written a simple script to do it.
https://aur.archlinux.org/packages.php?ID=58643
Please give me feed back.Interesting, here's mine. Here's with vertical being number of updates in a day than hours.
mod action: moving from Arch Discussion to Community Contributions.
Maybe you are looking for
-
How do i get imovie on my new macbook pro
using a new macbook pro and can't find imovie. is it pre-installed? how do i get it?
-
TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64) Command> dssize; PERM_ALLOCATED_SIZE: 51200000 PERM_IN_USE_SIZE: 45996153 PERM_IN_USE_HIGH_WATER: 50033464 TEMP_ALLOCATED_SIZE: 2457600 TEMP_IN_USE_SIZE: 19680 TEMP_IN_USE_HIGH_W
-
Half-pedaling through automation possible ?
Hi, I just bought a sustain pedal for my keyboard, and off course it's either off or on. Is it possible by using automation ........... or any other method .................. to 'suggest' half-pedalling ? By that, I mean that the sustain sound is par
-
IPhoto 08 keeps launching itself on computer boot
Suddenly after my last import my iPhoto 08 (7.1.3) keeps launching itself when ever I restart my computer. It's very annoying as it takes a long time to load. It seems to think my LaCie external firewire drive is a camera which maybe why it keeps lau
-
When I try to open a song in iTunes it locks up for a time
Like the title says, whenever I try to open a song in iTunes (for example, if a friend were to send me something over MSN), my computer freezes up for anywhere from 1 to 30 or more minutes. Sometimes CtrlAltDel fixes it right away but oftentimes the