Page breaks in a table and table row spacing
Hello -
Anyone know how to add a page break to a long table which spans several pages ?
Also - there seems to be padding added to my text both before and after - how do I get rid of this ?
Any help much appreciated.
Andrew
andrewpndavies wrote:
Anyone know how to add a page break to a long table which spans several pages ?
No such a feature in Pages but it is the standard behaviour in Numbers so it may be a good soluce to move your document from Pages to Numbers as I often wrote (and often do).
Yvan KOENIG (from FRANCE mercredi 22 avril 2009 14:10:17)
Similar Messages
-
I am trying to figure out ow to prevent tables from breaking along a row when there is a page break in "Pages". This is done in MS Word by going under Table properties under "Rows". I have a document with small three row tables and I want to keep the tables together and move to the next page in its entirety when there is a page break. Help!
The table that I don't want to break between rows looks like this, except it fits the width of the page:
quilt name
picture of quilt
source
Size: XX; Difficulty Level: 3
I inserted a Inline Text box into the document, copied the table inside the text box, then pasted it through the document (which lists quilting projects). When the table spans a page break, even when in an inline text box, the picture which is in the right hand column splits, as well as the information pertaining to the particular quilt.
Jerry - thank you for your help. I tried to give you a "solved my problem" rating, but I am adjusting to the Mac slowly after 20+ years on a PC. -
Compare 2 tables and insert rows missing in each table.
I have a tough situation. I have two exact tables- one online and one offline database. I know that there are missing rows of data from each table, so I need to make a comparison of one table and insert rows that do not exist. I was thinking to try this, but it took over 3 hours to run and did not return anything:
insert into t
select * from t a
where not exists (select * from [email protected] b
where a.col1 != b.col1
and a.col2 != b.col2
and a.col3 != b.col3);
and it goes on for another 7columns.
The trouble I have is to include a date clause so that the query can be broken down into running only a few months of data comparisions at a time- the records go back 4 years to compare. Also is there a way to write this so that it will query both tables at the same time in order to speed things up- or is one table at a time the best advice? Each table has over 100 million records to compare, that's why I was hoping to use a date criteria since one column is date.
Let me know what you advise to make this work, I hope I was on the right track.Not sure if the MINUS operator will perform better with your data set but;
SQL> create table t1 (some_id number, some_date date)
Table created.
SQL> create table t2 (some_id number, some_date date)
Table created.
SQL> insert into t1 values (1, trunc(sysdate))
1 row created.
SQL> insert into t1 values (2, trunc(sysdate-5))
1 row created.
SQL> insert into t1 values (4, trunc(sysdate-90))
1 row created.
SQL> insert into t2 values (1, trunc(sysdate))
1 row created.
SQL> insert into t2 values (3, trunc(sysdate-10))
1 row created.
SQL> insert into t2 values (5, trunc(sysdate-100))
1 row created.
SQL> select * from t1
SOME_ID SOME_DAT
1 07-07-30
2 07-07-25
4 07-05-01
3 rows selected.
SQL> select * from t2
SOME_ID SOME_DAT
1 07-07-30
3 07-07-20
5 07-04-21
3 rows selected.
SQL> insert into t1 (
select some_id, some_date from t2 where some_date between sysdate-50 and sysdate
minus
select some_id, some_date from t1 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> insert into t2 (
select some_id, some_date from t1 where some_date between sysdate-50 and sysdate
minus
select some_id, some_date from t2 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> select * from t1
SOME_ID SOME_DAT
1 07-07-30
2 07-07-25
4 07-05-01
3 07-07-20
4 rows selected.
SQL> select * from t2
SOME_ID SOME_DAT
1 07-07-30
3 07-07-20
5 07-04-21
2 07-07-25
4 rows selected. -
Transport table and table entries
Hi,
I need to create a table and table entries, here I need to transport table and its entries to another system,
what steps i need to follow for this?
Please help meEntries
Create entries by Se11-> utilities-> table content -> create entries
For Transport
Go to SE10.
Click on the 'Create' icon.
Select 'Workbench Request'(assuming your table is not customizing table).
Enter description and click 'Save'.
Put cursor on the task (lower number of the two) and in menu, 'Request/task>Change Type>Development/correction'.
With cursor on the task(lower number), click 'Object List' icon on the toolbar.
Once in, you need to toggle to 'Change' mode using the pencil icon.
Then click on 'New Entries'. Now add the R3TR, TABU, <ZTAB> in the first row.
Again in the menu, select 'Extras>Change object function>Key according to key list'.
Now go to the menu, 'Goto-->Key list'. In the subsequent screen, click on 'Insert line' icon(with a + sign).
Click on 'Key fields' button and it will now allow you to enter the values for each key field.
Regards
Shashi -
How to design a smartform with below tables and table-fields??
How to design a smartform and driver program using this tables and table fields
FIELD DESCRIPTION TABLE-FIELD
Tax Invoice No: vbrk-vbeln
Code vbpa-kunnr where parvw = RG
Ship To vbpa-kunnr where parvw = WE
PAN No J_1IMOCUST-J_1IPANNO for WE
ECC ,,
Range ,,
Div ,,
Excise Reg No ,,
LST No ,,
CST No ,,
Invoice No: vbrk-vbeln
Do No: vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZDO'
Sales Doc Num: vbfa-vbelv where vbeln = inv no and vbtyp_v = C get the vbeln where vbak-auart = 'ZSO'
PO: vbkd-bstkd where vbeln = sales doc no
Delivery No: select vbelv from vbfa where vbeln = inv no and vbtyp_v = J
Goods Removal Dt&Time: select vbeln from vbfa where vbelv = dlv no and vbtyp_v = R Put this vbeln in mkpf and get BUDAT and CPUTM
Selection screen parameter should be : vbrk-vbeln.Hi,
First design your form interface, this is the set of fields that you need to display in your form and create this as a structure in SE11. In your print program code the logic to extract the data into this structure, this is just regular ABAP, nothing special here.
When you have your data call function module SSF_FUNCTION_MODULE_NAME to determine the name of the generated smartform function module. Then call this function module, passing the data collected into your structure. If necessary you will need to find the print parameters required and pass these too.
In your smartform you will need to use the data structure you created in SE11 as the smartform interface and design the layout required to display these fields.
Regards,
Nick -
Transporting table and table maintainance generator
Hi,
Can i transport the table and table maintainace generator and function group of the table with in single request or not.
One more thing is when i transport the table maintainance generator,will the entries also be transport to another system or not.
Thanks in advance,
SureshHi Suresh,
Go to SE54-> Utilities-> Total Transport. The following things are transported.
The total transport transports the complete maintenance dialog:
authorization group
authorization group assignment
control entry
events
function groups
maintenance objects
variants
Content wont be transported it seems.
Thanks & Regards,
Nagaraj Kalbavi -
How to Find what are tables and "Table Name" in particular "Data File"
hi Team,
I have one database that database 300 gb size , this database having 6 ndf files ,
here How to Find what are the tables and "Table Name" in particular "Data File"[.ndf]Hi,
In addition to Prashanth’s suggestion, you can also use the following Transact-SQL statements to get more detailed information including all objects and indexes per Filegroup / Partition and allocated data size of databases.
The script can work with Microsoft SQL Server 2005 and higher version in all Editions. For more details, please review this article:
List all Objects and Indexes per Filegroup / Partition.
-- List all Objects and Indexes
-- per Filegroup / Partition and Allocation Type
-- including the allocated data size
SELECT DS.name AS DataSpaceName
,AU.type_desc AS AllocationDesc
,AU.total_pages / 128 AS TotalSizeMB
,AU.used_pages / 128 AS UsedSizeMB
,AU.data_pages / 128 AS DataSizeMB
,SCH.name AS SchemaName
,OBJ.type_desc AS ObjectType
,OBJ.name AS ObjectName
,IDX.type_desc AS IndexType
,IDX.name AS IndexName
FROM sys.data_spaces AS DS
INNER JOIN sys.allocation_units AS AU
ON DS.data_space_id = AU.data_space_id
INNER JOIN sys.partitions AS PA
ON (AU.type IN (1, 3)
AND AU.container_id = PA.hobt_id)
OR
(AU.type = 2
AND AU.container_id = PA.partition_id)
INNER JOIN sys.objects AS OBJ
ON PA.object_id = OBJ.object_id
INNER JOIN sys.schemas AS SCH
ON OBJ.schema_id = SCH.schema_id
LEFT JOIN sys.indexes AS IDX
ON PA.object_id = IDX.object_id
AND PA.index_id = IDX.index_id
WHERE OBJ.type_desc='USER_TABLE'-- add this WHERE clause to display the information of user tables
ORDER BY DS.name
,SCH.name
,OBJ.name
,IDX.name
Thanks,
Lydia Zhang -
Hi ALL,
I am new to SAP and currently learning SAP CRM.
I would like to know about *Tables and Table Relationships,* its applications in real time and its functionality.
Please clarify!.
Appreciate your responses.
Thanks!
Zo.Thanks Garcia,
I appreciate your response.
The document definitely helped me.
With this I got an understanding that all the data related to functions of SAP CRM (i.e BP, Org Model, Product, Transactions etc..) are stored in various tables and logically linked for easy access, update and retrieval of data for the consultants whenever required.
Pls correct if my understanding is wrong.
Coming to the linking of these tables or relationships,
Whether does a consultant need to manually link the tables? or is it done automatically in the SAP system depending upon the type of function used?
Thanks!
Zo..
Edited by: zohebshadab on Jul 27, 2009 10:13 AM -
CRM table and tables relationships
Hi
I'm looking for table and table relationship in the CRM.
Sales tables especially (like VBAK, VBAP VBFA Etc' at SAP ECC)
Yaki Katz
SAP SD ConsultantHI,,
Sales related tables in CRM.
CRMD_ORDER_INDEX- Index table
CRMD_ORDERADM_H- Order header table
CRMD_ORDERADM_I- Order Item Table
CRMD_ORGMAN Organizational Unit Set
CRMD_PARTNER Partners
CRMD_PRICING Business Transaction Pricing Parameter Set
CRMD_PRICING_I Transaction Item Price
CRMD_PRODUCT_I Transaction Item - Product
CRMD_SALES Business Transaction - Sales Set
CRMD_ORDERADM_H-GUID = CRMD_ORDER_INDEX-HEADER
CRMD_ORDERADM_H-OBJECT_TYPE = CRMD_ORDER_INDEX-OBJECT TYPE
CRMD_ORDERADM_I-GUID = CRMD_ORDER_INDEX-ITEM
CRMD_ORDERADM_I-HEADER = CRMD_ORDER_INDEX-HEADER
Regards
Srinu -
Difference between Table and Table Type
Hi
Can you please let me know the
Difference between Table and Table Type and
Difference between Structure and Table Type?
Regards,
Sreehi,
table is a data dictionary object in sap. table is of different types
1. transparent tables
2. pool tables
3. cluster tables
table type gives option for u to select different types of internal tables. they r
1. standard table
2. sorted table
3. hash table
Structures :
-Defined like a table and can then be addressed from ABAP programs.
-Structures contain data only during the runtime of a program.
-Just like user-defined data type.
- they are not present in database server and only on application server.
if helpful reward some points.
with regards,
Suresh Aluri. -
Refresh adf table and selection row
Hi,
I create web application. I have created entity Users from MySQL database and managed Bean. In this managed Bean (sessionScope) is method for connection to database and method for adding new row (data) in database. It works.
I have 2 problems.
The first.
I have form for adding User and commandButton Add.
How I can refresh (update) adf table after executing SQL command (in commandButton Add) ? Now I must reconnect session.
The second problem:
I want to show a panel with data from one row from adf table.
How I can selection this row in popup ?
My table:
<af:table var="user" rowBandingInterval="0" id="t2"
inlineStyle="margin:20px 30px; width:578pt; height:160pt;"
value="#{userController.users}"
rows="15"
emptyText="#{bindings.UsersprototypView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.UsersprototypView11.rangeSize}"
editingMode="clickToEdit" rowSelection="single"
selectedRowKeys="#{userController.selectedUser}"
selectionListener="#{userController.selectedUser}"> ---- Here I have problem.
<af:column sortProperty="#{user.user_id}"
sortable="false"
headerText="ID"
id="c11" width="33">
<af:commandLink id="ot34" text="#{user.user_id}">
<af:showPopupBehavior popupId="p4" triggerType="action"/>
</af:commandLink>
</af:column>
<af:column sortProperty="#{user.firstname}"
sortable="false"
headerText="Firstname"
id="c20" width="111">
<af:outputText value="#{user.firstname}" id="ot27"/>
</af:column>
<af:column sortProperty="#{user.lastname}"
sortable="false"
headerText="Lastname"
id="c12">
<af:outputText value="#{user.lastname}" id="ot31"/>
</af:column>
<af:column sortProperty="#{user.address}"
sortable="false"
headerText="Address"
id="c9" width="95">
<af:outputText value="#{user.address}" id="ot32"/>
</af:column>
<af:column sortProperty="#{user.city}"
sortable="false"
headerText="#City"
id="c10" width="76">
<af:outputText value="#{user.city}" id="ot33"/>
</af:column>
<af:column sortProperty="#{user.username}"
sortable="false"
headerText="Username"
id="c7" width="102">
<af:outputText value="#{user.username}" id="ot29"/>
</af:column>
<af:column sortProperty="#{user.email}"
sortable="false"
headerText="E-mail"
id="c21" width="106">
<af:outputText value="#{user.email}" id="ot28"/>
</af:column>
<af:column sortProperty="#{user.regdate}"
sortable="false"
headerText="Registration"
id="c8" width="108">
<af:outputText value="#{user.regdate}" id="ot30">
<af:convertDateTime pattern="#{user.regdate}"/>
</af:outputText>
</af:column>
</af:table>userController is name managed Bean.
users is list of users.
My panel window (popup):
<af:popup childCreation="deferred" autoCancel="disabled" id="p4">
<af:panelWindow id="pw9" title="Delete user">
<af:panelFormLayout id="pfl6">
<af:panelLabelAndMessage label="ID:"
id="plam16">
<af:outputText value="#{userController.selectedUser.user_id}" id="ot50"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Firstname:"
id="plam17">
<af:outputText value="#{userController.selectedUser.firstname}" id="ot51"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Lastname:"
id="plam18">
<af:outputText value="#{userController.selectedUser.lastname}" id="ot52"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Address:"
id="plam19">
<af:outputText value="#{userController.selectedUser.address}" id="ot53"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="City:" id="plam20">
<af:outputText value="#{userController.selectedUser.city}" id="ot54"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Username:"
id="plam21">
<af:outputText value="#{userController.selectedUser.username}" id="ot55"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="E-mail:" id="plam22">
<af:outputText value="#{userController.selectedUser.email}" id="ot56"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Registration:"
id="plam23">
<af:outputText value="#{userController.selectedUser.regdate}" id="ot57">
<af:convertDateTime pattern="#{userController.selectedUser.regdate}"/>
</af:outputText>
</af:panelLabelAndMessage>
</af:panelFormLayout>
<af:commandButton text="Delete" id="cb18"
inlineStyle="width:80pt; margin:10px 0px 0px 0px;"/>
</af:panelWindow>
</af:popup>When I cut out row: selectionListener="#{userController.selectedUser}
Popup (for deleting user) looks like this:
http://imageshack.us/photo/my-images/404/popupc.jpg/
I need to get the outputs from <af:outputText> in this popup.
Thanks for help.
Edited by: user9202624 on 26.2.2013 7:52thanks for answer.
I added partialTriggers in af:table
<af:table var="user" rowBandingInterval="0" id="t2"
inlineStyle="margin:20px 30px; width:578pt; height:160pt;"
value="#{userController.users}"
rows="15"
emptyText="#{bindings.UsersprototypView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.UsersprototypView11.rangeSize}"
editingMode="clickToEdit" rowSelection="single"
selectedRowKeys="#{userController.selectedUser}"
partialTriggers="::t1" >What next ? What should I do next ? Sry, I'm newbie in adf and jDev.
Edited by: user9202624 on 26.2.2013 8:55 -
Hi All,
I have two table with similar structure and data, one is on disk and the other is in memory. I somehow calculated the difference between a row size of on disk and in memory table and found that the row size of in memory is 700 Bytes more than the disk based
tables.
aaAs others mentioned, memory optimized tables and disk based tables have different structures in SQL Server 2014.
For memory optimized tables, the number of indexes on table also contribute to the size. You can calculate the exact size of rows and thus the table size using the formula given in the below articles
Table and Row Size in Memory-Optimized Tables
Estimate the Size of a Table
Krishnakumar S -
Updating multpile tables and multiple rows - JDBC adapter
Hi,
The scenario is like this. i receive an Idoc which has header information and various line items (multiple occurrance of a segment). the hearder details have to be sent to one table, TableA, and all line items has to go to another table, TableB, and for each line item, a new row has to be inserted in TableB.
How can i acheive this using JDBC adapter? how should my data type look like? what are the settings i need to do in adapter config?
Thanks and Regards,
RashmiHi Rashmi,
You can use the following link for the JDBC adapter call :
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
You need to provide the JDBC Driver, Connection,User Name and the password.
The data type structure you can take from the Bhavesh blog:
JDBC Receiver Adapter -- Synchronous Select Step by Step
Since you just need to update the tables, take only the sender side of the blog, i.e. the request part and configure the scenario accordingly.
Regards,
Sanjeev. -
Opening a IDML File with a table and 1000 rows simply hangs
Hello,
1. I generate IDML files that consist of a table with (1000 rows*9 columns) colour formatted cells. When I try to open the file it just hangs at "Open Document".
So you're probably thinking, there's something wrong with my IDML File?
2. I "place" an equivalent spreadsheet from Excel, with formatting. It transfers correctly. I save it as a IDML file, when I go to reopen this file, same problem as above.
3. In step 2, If I instead save the file as a INDD, the INDD file re-opens correctly & fast.
Our company catalogue has about 11728 rows * 9 columns.
I have a strange sense of Dejavu, and it all seems to be pointing to the way INDESIGN handles (or doesn't handle) XML
http://forums.adobe.com/thread/756449?tstart=0
thxSorry for the wall of text!!
Ya, i figured a non indesign solution was the way to go. Hence the LaTeX (Typesetting) + php thing. It didnt need to be in a table, but it needed to appear like a "table" format. Cells with each cell having borders etc and it will eventually go to print.
IDX!? I'll need to investigate this file format
Well not necessary to use excel, or tables, since I pull the information out from a MySQL database anyway. I wanted to use IDML because once the file format is just simple XML and extremely easy to manipulate. My awesome theory was, if it was already in a table format, that would make it even easier to manipulate - all i would need to do is write php code to add new rows (Directly into the file). A designer could make the IDML file template file for us, and I could write a script that populates the data directly into it.
We tried other methods such as merging XML into tag placeholders but while that worked fantastically on small amounts of data it grinded to a halt+crash on large amounts of data.
Ideally we wanted designers to make a template, and I.T. to just come along and insert the data accordingly. It also needed to be perfectly print accurate without alot of messing around. XSLT would be an interesting alternative, but our designers are again not very XSLT / EXCEL/ XML / X-Anything savvy. It would still need to be a programmers nightmare to get it to appear correctly (eg. mine).
Thanks for pointing out additional alternatives! There are some good things I had not considered.
Although I have found some additional benefits using LaTeX; Automatic Index, and table of contents (Sweet!) - it also handles any required text wrapping.
I think I'm flagging this thread as more of a bug thread than a request for a solution
We were looking into purchasing indesign server for some future endeavours but if I have no confidence in the desktop version of indesign, how can I be assured that the server version of indesign wont just cause the company more headaches down the line
thX!! awesome -
Dynamically creating table and inserting rows and columns using JSP
Hi,
I'm using mysql and JSP to create web interface for my forms/tables. I wanna create the table dynamically depending on the data in the table and for each particualar record. and these values shud be loaded on the form after loading from the databaes as soon as the form loads.
also i want to have a button which shud add new rows dynamically. and same one for columns.
how do i calculate the values across the rows on the forms
I'm new to JSP. Please point me in the right direction...any tutorials or code will be helpful.
Any help is appreciated.
Thanks
Ayeshau write the code in sequence:
1 write jdbs to select count(* )from table
2 put in array e.g. String doc_no=new String[count];
3 write jdbs to select * from table with condition
//for no. of records just write
for(int j=0;j<(count);j++){
<% while(rs4.next()){
doc_no=rs4.getString(2);
date1[i]=rs4.getString(3);
doc_type[i]=rs4.getString(4);
location[i]=rs4.getString(5);
cheque[i]=rs4.getString(6);
rate[i]=rs4.getInt(7);
deb_qty[i]=rs4.getInt(8);
cre_qty[i]=rs4.getInt(9);
deb_amt[i]=rs4.getInt(10);
cre_amt[i]=rs4.getInt(11);
i++;
//rs4.close();
for(int j=0;j<(count);j++){
System.out.println("Data count= "+j);
%>
<tr>
<td width="15%"><font size="1"><%=doc_no[j] %></font></td>
<td width="10%"><font size="1"><%=date1[j] %></font></td>
<td width="12%"><font size="1"><%=doc_type[j] %></font></td>
<td width="9%"><font size="1"><%=location[j] %></font></td>
<td width="9%">
<div align="left"><font size="1"><%=cheque[j] %></font></div>
</td>
<td width="8%">
<div align="right"><font size="1"><%=deb_qty[j] %></font></div>
</td>
<td width="8%">
<div align="right"><font size="1"><%=cre_qty[j] %></font></div>
</td>
<td width="9%">
<div align="right"><font size="1"><%=deb_amt[j] %></font></div>
</td>
<td width="10%">
<div align="right"><font size="1"><%=cre_amt[j] %></font></div>
</td>
</tr>
write if there is any specific problem
bye,
Samir
Maybe you are looking for
-
My 5th Generation iPod will not sync under Windows Vista
Wow.. I finally got registered on this forum, took ages lol. Well I've got the latest version of the iTunes software and I'm using Windows Vista Home Premium. When I connect my iPod, it detects ok and then iTunes starts to sync it.. after about five
-
Can you help that how can i connect Ipad 1 with ios 5.1.1 to apple tv 3 ?! I used airplay but it cant ?!
-
Why did they take away the "Open In New Tab"option in Top Sites, Bookmarks, and History?
Why did they take away the "Open In New Tab"option in Top Sites, Bookmarks, and History? This very annoying.
-
Changing an email address throughout the Enterprise on schedule reports
We will be changing our email address from fsc.edu to fitchburgstate.edu. I have been told I need to manually change this address for all scheduled reports on the Enterprise. Is there an easier way to do this instead of going into each report? Thanks
-
Where do i find 'storage' on snow leopard ?
Hi. I'd like to upgrade to Mavericks but not sure how much GB I need from my Internet Provider. When I tried to download Mavericks, I went way over my monthly allowance and my usage bill doubled ! I now have an icon on my desktop inviting me to insta