Page cannot run normally on EBS 11i
I developed an OAF page and it is used to search data and insert data into base table for those records user checked the checkbox.
I run this page per my JDeveloper 9i and debug it. The page runs well and the data are inserted into base table successfully. So I import it into MDS and deploy it onto EBS 11i (the same server and database). And then I hang it under a standard menu which has a side navigator. When I test it, I find out the url on the side navigator is not correct as standard's. So I modify my page and use standard AM and CO on pageLayout. And place my AM and CO and my custom queryRN. Then the URL of side navigator works now. And the data also can be searched as well as before.
But, when I check some checkbox and then submit the create button, nothing happened. No error raised and no data is inserted into base table. (I remove all try ... catch but no any error info raised yet)
So I wish somebody can help me to analysis about this problem. Any advices are appreciated.
What changes exactly did you make to your AM, CO? Did you put debug messages in your controller and check if the call is going to create method call?
--Shiv
Similar Messages
-
"Page cannot be displayed" error in EBS R12
Hi All,
We implemented EBS R12 with 2 Application Node, 2 CM nodes and 2 DB Nodes(RAC). We have also setup load balancer at the application level. We have enabled HTTPS at the load balancer level. Our application works perfectly fine except some of the PIM module related screens and especially Workflow Manager, it gives us "Page Cannot be displayed" error sometime. What we have observed is, Our URL is https://ebs.abcltd.com but when we click on Workflow manager link under Oracle Application Manager, the URL gets redireced to http://ebs.abcltd.com:443/. We would like it know why this redirection is happening? as we have not mentioned this (http://ebs.abcltd.com:443) url in our context file.
Thanks,
PrasadHi Prasad,
Can you find any errors in Apache/Workflow/Database log files when this error occur?
Did you verify the session persistence on the load balancer? -- See the documents referenced in this F5 Load Balancer with Oracle 11i.
Regards,
Hussein -
Page cannot be displayed error when login to EBS home page
Hi All,
I have some problem login to EBS page, if only one responsibility is active to user it will get error Page cannot be Displayed error 404 on the Main Menu.
However if 2 or more responsibilities are active no error will come up and it will show all responsibilities.
Below is the log I got from apache.
[Thu Apr 28 15:58:26 2011] [warn] mod_plsql: Stale Connection due to Oracle error 6502
[Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at "APPS.ICX_CALL", line 1077
ORA-06512: at "APPS.ORACLENAVIGATE", line 2358
ORA-06512: at line 28
Appreciate if someone can share something about this.
Database Server
RDBMS : 10.2.0.2.0
Oracle Applications : 11.5.10.2
Thanks a lotHi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help! -
EBS 11i Problem when i try to login to the main page
Hello
I have tried to access to my login page for ebs 11i but the page looks like
i checked the database status is up and open .
thanks for replyWas this working before? If yes, any changes been done recently?
Does AutoConfig complete successfully on all tier nodes?
Please see:
On 11.5.x, Login failed on "null Cannot Get Connection to the Database" after the Database Upgrade to10g R2(10.2.0.4) (Doc ID 1448586.1)
Troubleshooting Login Problems in Oracle Applications 11i (11.5.2 – 11.5.10+) ( Framework and OSSWA) (Doc ID 342332.1)
Thanks,
Hussein -
EBS 11i - Getting Blank Page after Clicking System Administrator Link
Hi Experts,
I recently migrated the EBS 11i (11.5.10.2) from Solaris to Linux 5. Most of the things seems to be working fine but once I click the link System Administrator getting blank page. I found the following errors in the Jserv Logs. I am trying it from IE7 as well as from Firefox 3.
Please help to resolve the issue.
java.lang.NullPointerException
at edu.apollogrp.fsg.cas.EncryptionUtil.encrypt(EncryptionUtil.java:63)
at edu.apollogrp.fsg.cas.CASClient.getEncodedAndEncryptedStr(CASClient.java:102)
at edu.apollogrp.fsg.cas.CASClient.authenticateCAS(CASClient.java:53)
at oa_html._fndvald._jspService(_fndvald.java:200)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
Thanks
ShashiHi Hussein,
No error in the Apache Log. Any how I have turned the CM off and login seems to be little better so will deploy the CM on seperate node. I upgraded the system from Jinit (1.3) to JRE 1.6.0_24. We are on Developer 6i patchset 18. But now while loaded the forms , it is hanging. I enabled the debug for JRE and got the following error.
I have relink all the executable (all completed successfully). Regeranted JAR with FORCE.
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 558200 us, pluginInit dt 7706667 us, TotalTime: 8264867 us
basic: Applet initialized
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndaol.jar!/oracle/apps/media/splash.gif
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndforms.jar!/oracle/forms/icons/oracle_logo.gif
Exception in thread "thread applet-oracle.forms.engine.Main-2" java.lang.NoSuchMethodError: oracle.ewt.lwAWT.lwText.LWTextField.setTextAlwaysLeftAligned(Z)V
at oracle.forms.engine.Main.initDesktop(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks -
Page cannot be displayed while running report in OAS (10.1.2.3)form/report
Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
KiranaI am facing a similar problem. Did you find a solution to this problem?
Thanks
Karnail -
Run report cause "The page cannot be displayed" OR The connection with the
Hello,
1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
Problem explanation
one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
data,
one report i tried its size is almost 900k ( they are using the same line since last three month and they are
able to run all reports before, bandwidth is 128k), if you run report browser search a little while
for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
this message
Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
The connection with the server was reset.
I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
for
head office client but they are able to run all report with out any error.
any one have idea??
Thanks and Regards,
KhawarHello,
Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
Increase the Keepalive time in webcache to a higher value
**************EOF******************
Thanks and Regards,
Khawar -
Page cannot be displayed - No Web Dispatcher - Only ICM running
Hi,
Our training system is a SAP ERP Central Component 5.0, on a WAS 6.40 platform. There is only the Central instance running with all processes available, including ICM. The Dispatcher is NOT configured.
When entering following url, results in 'Page Cannot Displayed'error message:
===============================
http://<virtual-FQDN>:<port>/sap/bc/bsp/sap/hrrcf_start_int?sap-
client=230&BspClient=230&sap-
language=EN&BspLanguage=EN&rcfSpId=9001&rcfContext=MCC
<b>The 'Page cannot be displayed'error occurs FOR ALL SERVICES.</b> The above url was working before and as far as everyone here knows, there have been no changes.
The following url ping tests were SUCCESSFUL. These were typed directly into the Internet Explorer Address:
==================================================
http://<virtual-FQDN>:<port>//sap/bc/ping?sap-client=200
and
http://<virtual-FQDN>:<port>//sap/bc/ping?sap-client=230
and
http://<virtual-FQDN>:<port>//sap/bc/ping
However, performing the ping test from Tx SICF, results in an error. For some reason, the url resolves to Physical-FQDN for teh hostname. However, when changing hostname to the Virtual-FQDN, then Ping works. (Not sure why the Physical-FQDN is not working)
Also testing the service hrrcf_start_int from Tx SICF, results in the same Page cannot be displayed error. (Same for all services)
From Tx SE80, INTERNAL has been selected for Publishing.
Service has been activated.
Have run program SIAC_PUBLISH_ALL_INTERNAL from Tx SE38. Services has also been deactivated and activated from Tx SICF. None of this has helped resolve the error.
Some ICM parameters as follows:
icm/server_port_0 = PROT=HTTP,PORT=8012
icm/host_name_full = <virtual-FQDN>
As mentioned before, the url was working some 2 weeks back, but for some reason is no longer working.
Regards,
SanjayHi Dezso,
Thanks for your suggestion.
The issue is now being resolved. The problem was as follows:
Previously the on-site Consultancy had configured one of the Transport Consolidation routes from DEV to TRN. (This has now been reconfigured so that TRN as well as PRD are the TARGET routes from QA system.
However, previously ABAP Support Packages were applied to DEV & QA. (& not to TRN). Then a Developer transported the SPAU transport through the landscape and it obviously went to the TRN server. (Transport was not imported into Production).
So TRN had no SPs applied, but the transport had been imported into TRN due to landscape setup.
Now the problem is due to an object that concerns authentication which was overwritten by the transport in TRN. (Preventing user authentication). We have a work around in that we can send the users directly through the ITS via a url, they can then authenticate and then they copy and paste the url they are using in the IE Address space. After logging on, the IE session is still holding the session cookie, so no need to authenticate again after copying the url the user wants to use. (I hope this makes sense? No sure how better to describe this).
The longer term solution will be apply the SPs also to TRN and then apply the SPAU transport to TRN and it should then be fine.
Regards,
Sanjay -
The page cannot be displayed while running the report with web link
Hello,
I tried to run the report using a web link similar:
http://hostname/reports/rwservlet?report=WRFTCKL.rdf&userid=use/pass@datbase&desformat=pdf&destype=CACHE¶mform=yes
I am able to see the parameter form, but after I entered some parameter and submit, I got an error as:
The page cannot be displayed.
But if I run it with the paramform=no and attached the parameter/value pair at the end of the link, the report will show on the web.
Anyone knows what is wrong?
Thanks.try this sample report from
http://www.alexyscorp.com/products.htm
(Download the Forms Reports Integration based on run_report_object (FMB,RDF) ) -
hello! i tried to install OS5 in my 1st gen IPAD (16gb) and it froze in the process. My IPad still runs normally (on OS 4) EXCEPT itunes cannot recognize, sync or even charge my IPad!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
i can't see any wrote on firefox page. But when open safe mod (with shift because there is no wrote ) firefox run normally.
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/ -
Parameter Page Displays "Page Cannot Be Displayed" while running report
Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
NagarajParameter Page Displays "Page Cannot Be Displayed" while running report
-
PO approvals @ Blackberry thru EBS-11i Normal/Wirless Notification Alerts
We are exploring PO/PR approvals through Blackberry utilizing EBS-11i Notification Alerts. I have three questions
1. Whats difference between "Oracle (Notification/Email) Alerts" AND "Oracle Workflow Notification Alerts".
2. Is EBS-11i sufficient to exploit its email sender to receive aswell and work with NID embedded in email
3. Why do we need Application Server "Wireless" component!?! if we could receive normal emails with NID tag embedded through non wireless App server 10g setup. Our blackberries since receiving normal email fine, can/may also receive NID tagged emails in same traditional manner.
Please guide.
Thank you -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
How can I do the load test for EBS 11i
Dear Suport
I start to try OATS.
I have used a Openscript to record the functional test and it works fine for EBS 11i.
However, I cannot directly use the script from Functional Test. Is there have any ways to convert the Functional Testing script to Load Testing script?
Since the fail of using functional script, I create a new Load Testing script in Openscript and record what I do in functional test. However, I got the below error when I record the script.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2010-01-06 11:42:07.354
!MESSAGE Could not determine request character set for http://localhost:8088/olt/ConnectToServer.do, referer=http://localhost:8088/olt/BuildScenario.do
!ENTRY oracle.oats.scripting.modules.browser.api.javaHelper.Installer 4 0 2010-01-06 11:42:58.678
!MESSAGE formsRecorder.jar does not exist in C:\Program Files\Java\jre6\lib\ext
I have tried to copy the file, formsRecorder.jar, from C:\OracleATS\OpenScript\openscript_configuration\org.eclipse.osgi\bundles\56\1\.cp\lib to C:\Program Files\Java\jre6\lib\ext
However, the file, formsRecorder.jar, will be deleted when record the test by openscript. (Antivirus too is disabled during record the script).
Do you have any idea for record the Load Testing script by Openscript?
Regards
Sidney WongTry the trial version of HTML Optimizer - it will optimize 50% of your files and may convince you that optimizing is your best chance to get your site to load in IE unless you want to drastically reduce your page file sizes.
Maybe you are looking for
-
Cell Padding in SQL Report Region
I have what I hope is a simple question. I have a SQL Report region and I want to add more padding to the left and right sides of the table cell. I don't want to change the style sheet because I don't want to affect other pages. But I tried adding
-
Displaying user selection from drop down list in static text on master page
Hello, I am using LC 7.0 at workk and I have hit a road block. I have a drop down list at the top of the form. Once the user makes a selection, I want to take that value and paste it in static text located on the master page. I can't seem to get it t
-
1st Generation Ipod Touch 32GB
I have a 32gb 1st generation Ipod Touch. It was a gift purchased at the Navy Exchange(military store). The sound has gone out. I can no longer hear any music. Is it worth trading in for a new one at bestbuy? Or can the sound be fixed. Everytime I pla
-
Outline of objects in photos are grainy when viewed at 16.67% but not at 25%. Messes up editing
Hello, I have recently been having this problem where the outlines of objects in photos is grainy at certain magnifications. It only started recently and I haven't made any setting changes in Photoshop nor have I changed my monitor or video card set
-
Blocked Invoice history reporting
Hi Folks, We are currently in the process of moving to Central AP processing and a report on the history of the invoice blocking reasons is required. Our ABAPer is using the CDHDR and CDPOS as source but we have found that any invoice, manually block