Page navigation in Acrobat does not match page numbers in the document

I have a document in both Framemaker format (server.book) and PDF (server.pdf). When I view the pdf file in Adobe Acrobat, the page numbers appear correctly on the document itself, but up in the Page Navigation window within Acrobat the pages number doesn't match.
In the beginning of the book I have Title page, a Table of Contents, and a Preface that all use lower-case roman numerals. However, when viewing this document via Acrobat, the Title pages show up as i, and ii, but then the Table of Contents and Preface show up as pages 1 - 8 instead of iii - x in the page navigation window.
I can't figure where this discrepancy is originating.
Please help.

Acrobat has no way to know which bit of character string on each page is the page number.
The visible page number has never formed any part of Reader nav. as you point out, it couldn't.
Acrobat knows the Numbering Properties of the pages as created in Frame. It just doesn't display or honor them consistently, depending on Reader version.
I also use i, ii, iii, iv for pre-narrative material. The romans are displayed in the page number box of Acroread (this is AR7 on Unix). I can enter "ii" in the box, and go to that page. But the Print dialog is Ordinal only. Printing page ranges in AR7 is always off by 2 or 4 relative to the actual page numbers.
Acrobat Pro 9 (9.4.5, Win7-64) seems to be more consistent, and does show and accept real page numbers for Print.

Similar Messages

The Dreamweaver client version does not match this version of the BrowserLab client

Cannot use BrowserLab
I have followed the upgrade instructions on this page
http://labs.adobe.com/downloads/browserlab.html
Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
But when I try to use BrowserLab from Dreamweaver after program loads error message says
"The Dreamweaver client version does not match this version of the BrowserLab client.
Please download and install the latest version of the Dreamweaver MXPs"
I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
Macintosh OS 10.5.8
Dreamweaver CS4
Extension Manager CS4 (2.1.115)

Hello toni7,
I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
What is the version number of the extensions displayed in Extension Manager?
Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
Do you have more than one MeerMeerDW folder at the path above?
Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
Best regards,
Corey

"save as" pop up box does not allow me to save the document.

Hello ,
"save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
Thanks!

Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files":

IWeb pages published in folder do not match pages published on .mac

After creating a photography website in iWeb '07, I am unable to have the contents of that website that I publish to a folder match what I created in iWeb and/or published on .mac.
In other words, when I publish a page of photos to a folder (to later add paypal html coding) the html version does not match the published version on .mac.
Has anyone experienced this problem?
I was orgininally able to have the html file match the .mac version verbatim but after I added and deleted a few photos, the html file in the folder (as viewed with TextEdit) has not matched the edited changes ever since.
Any help, ideas or suggestion on this would be very helpful. The folks at the Apple store and at Apple Care were not able to help.

yeah, same here. I have more than 60 Video Tutorials on my site for free, many of them on iWeb so please have a look, as some of them definitely address your questions.
It is at http://www.australianmac.com and click on Tutorials on the top of the page. If they do not help then email me from the site and I will make you one that does.
Dave
( I may receive some form of compensation, financial or otherwise, from my recommendation or link. )
< Edited by Host >

Acrobat does not opens a PDF in the Browser at all times

Required:
I need to ensure Acrobat opens a PDF in the Browser at all times, and not have Reader hijack the task. All fixes for this I have found won’t work as they render Reader inoperable. i.e. uninstalling Reader or denying users to the Reader executable AcroRd32.exe
Situation:
I have a problem with Adobe Reader and Acrobat Standard 8.2.5. This is on a Terminal Server 2003 with 10 users. They require both Acrobat and Reader be accessible due to specific 3rd party applications related to banking software.
Problem:
They must open PDFs in a browser with Acrobat so they may fill the forms and save them. Acrobat doesn’t consistently open the file; Reader hijacks the file when clicked to open and their ability to fill the forms is hindered.
- Open PDF in browser is checked in Acrobat
- Open PDF in browser is NOT checked in Reader
Sometimes when the Acrobat desktop icon is clicked, Reader opens instead. Having Acrobat open in the background does help but is not consistent.
Also uninstalling Reader from the Server is unacceptable due to a 3rd party banking application for loans. This application is hard coded to open AcroRd32.exe within the application for opening PDFs.
Any suggestions would be greatly appreciated.
Ken

Try this, when I right clicked on the document to rotate the image a noticed a tool bar appeared at the bottom of the page with the save icon. It then disappeared, but by hovering at near the bottom of the document the tool bar appears and I can save the PDF.

Stop Query if it does not match with Condtions & Control the result count

Dear All,
I have requirement in my Environment, I have to stop the Queries which compromises these conditions
1. If Query is running more than specified threshold (if it running more than 2 mins).
2. If Query is fetching huge data (rows more than 1000 for example)
Please note we have done enough study on resource governor, it works on compile time, we need to control the queries during run time. Also resource governor does not restrict the resources if they are free.
Answers are appreciated.

Hello,
I would not advise you to do such things in your environment.2 mins is very less time how could you be so sure a 2 min query is bad. And your second point is totally baseless it wouldtake a query a fraction of secondto read 1000 rows.My answer would be please
dont implement.
If you want to test below query might achieve the first requirement, I have not tested it please treat this query as hint and optimize or add anything if required.
If you schedule this query through agent for every 2 mins or 5 mins .It can achieve.But some query takes more time to rollback than to finish scheduling this would lead to unstable environment
USE MASTER
IF EXISTS (SELECT * FROM TEMPDB.SYS.ALL_OBJECTS WHERE NAME LIKE '#KILL_CONNECTION')
BEGIN
DROP TABLE #KILL_CONNECTION
END
CREATE TABLE #KILL_CONNECTION
SESSION_ID INT
,TOTAL_ELAPSED_TIME BIGINT
,START_TIME DATETIME
INSERT INTO #KILL_CONNECTION
SELECT
SESSION_ID
,TOTAL_ELAPSED_TIME
,START_TIME
FROM SYS.DM_EXEC_REQUESTS
WHERE TOTAL_ELAPSED_TIME > 7200 AND SESSION_ID > 50
DECLARE @SESSION_ID BIGINT
DECLARE @CMD VARCHAR(1000)
DECLARE KILL_CONNECTION CURSOR FOR
SELECT SESSION_ID
FROM #KILL_CONNECTION
OPEN KILL_CONNECTION
FETCH NEXT FROM KILL_CONNECTION INTO @SESSION_ID
WHILE @@FETCH_STATUS = 0
BEGIN
SET @CMD = 'KILL ' + @SESSION_ID
EXECUTE (@CMD)
END
CLOSE KILL_CONNECTION
DEALLOCATE KILL_CONNECTION godrop table #Kill_connection
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Lync 2013 does not show normalized numbers in the client contact card.

Hi,
We are migrating from OCS 2007 to Lync 2013. Everything runs now in side by side topology.
I have problems with contacts numbers shown in the Lync client.
I've moved "Company_Phone_Number_Normalization_Rules.txt" file from OCS server to Lync. All rules works fine there, after running update-csaddressbook , Invalid_AD_Phone_Numbers.txt file is empty (no errors).
We are using this format in AD for users: (613) 123-4567 Xdddd
Normalization rule is:
(\s*)$?\s*(613)\s*$?[\s()\-\./]*(123)[\s()\-\./]*(4567)[,\s\w]*(\d\d\d\d)
+$5
So it will normalize phone (613) 123-4567 X5656 to +5656 (We need it this way because we are using phone control)
Problem is that this normalized phone does not shown in Lync client, but it perfectly works in old OCS environment.
Thank you!

Hi,
I've replaced my old rule with one that you wrote, and it works as it should (ABServer.exe -testphonenorm
recognize it in the right way). Thank you for this advice!
Then I run update-csaddressbook, removed .db and .idx files from user, re-lunched Lync client..but this number still not shown.
Here are results of Get-CsAddressBookConfiguration
Identity                   : Global
RunTimeOfDay               : 1:30 AM
KeepDuration               : 30
SynchronizePollingInterval : 00:05:00
MaxDeltaFileSizePercentage : 20
UseNormalizationRules      : True
IgnoreGenericRules         : False
EnableFileGeneration       : True
MaxFileShareThreadCount    : 300
EnablePhotoSearch          : True
It looks strange, number can be normalized, but it's not shown for the user.

"Message Processor" does not get assigned when saving the document.

Hi folks!
When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
This used to work but does not anymore. Now I cannot find the reason why.
I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
I am using SLFN transaction type service provider scenario (SLFC0001)
Anyone got an idea?
Thanks in advance.
Regards
Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

Hi Christian,
did you solve this issue on your own? can you share your experience?
thanks
Pedro Rodrigues

Web Page composer : new layout does not display Page Header Links Manager

Hello,
I am currently working with Web Page Composer, and this is my issue :
when using original layout, the header are displayed with "Add to favorites", "Print", "E-mail" etc... and all chosen links via the "Select Page links" link.
But whith my custom developped layout, I can choose wich links to display but they did not show up.
I think my layout miss a configuration point, but I did not manage to find out which one.
Does anyone have an idea ?
Thanks a lot.
Fabien.

Hi Fabien,
Probably, you might have missed something in the configuration part.
Please ensure, you check all these steps, mentioned in here.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/d2970be57f4ebbe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/45/d31ee7d4876f74e10000000a1553f6/frameset.htm
Good Luck.
Sandeep Tudumu

Preview does not match printing

When I print a pages document it often leaves out graphics or text boxes. I check to make sure photo is in front and even delete photo and re position it. The image shows in preview but does not print. I sent the document as a PDF to a PC and the image printed correctly.

Hi McJPP,
You're using one of the built in color setups for Photoshop, so no big deal there. Since you have your monitor properly calibrated and profiled, ColorSync shouldn't be having an issue handling the difference between the image's color space and your monitor's. Questions though. Is the image RGB? Does it have an embedded profile? If so, is it Adobe RGB 1998? I'm assuming that it does since that's your working RGB color space in Photoshop.
The grab on the left is the preview copy using:
By preview, do you mean the Preview button on the print dialogue box at the bottom left next the the PDF button? I'm guessing yes since I can produce the same kind of result. It's a bit hard to explain, but I'll try.
I took a simple grayscale image and made it RGB. I then did the same thing you did. Left image is Photoshop handling color for an Epson Stylus Pro 4000, using a profile I made for a DuPont paper. Then clicking the Preview button when the print dialogue comes up. Right image is letting the printer handle color and clicking Preview. The result is below.
Believe it or not, there's nothing wrong. Photoshop (more accurately, ColorSync) is showing you what it had to do to the pixel color values to adjust for how the inks perform on the chosen paper. The end result, with proper profiles, is that the printed image looks like what you see in Photoshop regardless of how it shows in Preview mode. The Epson driver doesn't make this visible cue even though you've turned ColorSync on there, so it simply shows you the same thing you see in Photoshop, even though it's making the same adjustment to the pixel color values.
You should get essentially the same final output no matter which way you print the image.

Itemization does not match cost component split

Hi,
I need your help or could you please shed some light as to how to fix .
A new Overhead was created, in order to add expenses to the pricing of the product. For it a variant of different pricing to which is used currently was created, and so for maintain a historic one of the information.
In addition, in the cost component Structure an adjustment of the configuration was carried out, this was done because the previous the cost component Structure contained 18 elements of costs, which the most of the elements were specified as fixed and variable costs, therefore the system only permitted the addition of 2 more elements (SAP only permits 20 elements of fixed and variable costs), nevertheless was necessary to create a total of 23 elements of costs. For it the previous elements have to be modified and to change some elements as variable costs, specifically the elements corresponding to the accounts of materials. using tcode OKTZ
The addition of 5 more elements of costs, corresponding to overhead elements, where the type 41 costs classes were configured from the plan of surcharge created.
After carrying out the changes and to transport them the client of production, when i execute the T-code ck13n an inconsistency in the previous pricings was generated, because the cost component Structure was modified and the the following one Nº message was showed: CK869 " Mat.XXX in plant XXX: itemization does not match cost component split, the report of itemization shows different values to the reports of Costed Mutilevel BOM and of Cost Components. Additionally to the error shown by the system, also is observed that to the Cost Components report a cost in the new elements of overhead was added, even when the calculation of previous cost did not contain the determination of overhead.
In order to fix the error, I modified the cost component structure as it was before and the created another cost component structure with the required changes requested by the client specifying that it should start to be current this year. However after that change the error message nºCK869 continue: Mat. XXX in plant XXX: itemization does not match cost component split. Adding to that error message, the cost of the finished product changes with reference to the calculus of the previous product after modified the configuration and that is because the cost of the semifinished product is not being taken the values of the row material, and it is appearing with cost 0 and the only value that is taking on the matter are the costs of the activities types.

If you want the message to go away then you need to mark and releasse the estimate. However, there is no requirement that you do this. The message you are getting is an informational message only. You can continue without re-costing the item. If you do re-cost the material the new cost estimate will reflect and changes you've made to the components, so there is a good chance you will get a different value with the new estimate. So if that's ok, go ahead and mark and release the new estimate.

Reader version listed in GUI does not match that of executable file (again)

I posted regarding this issue before (http://forums.adobe.com/message/4817948), but was never able to find an answer.
Presently I am deploying Adobe Reader 10.1.5 via the MSI installer and group policy. The issue is that a user shut down her Windows 7 computer midway though the MSI installation interrupting (i.e. screwing up) the installation process. I had to delete a few registry entries and reboot the user's PC in order to re-initiate the Reader installation (something I've done in the past).
To verify that Reader was installed sucessfully, I browse to the Reader executable (AcroRd32.exe) in Program Files, double click the executable, select About Adobe from the Help menu, check the version number in the information box and see that the version number is 10.1.4 (i.e. the old version that I am upgrading from). However, when I browse to the Reader executable (AcroRd32.exe) in Program Files and and open the file properties, I see that the version is 10.1.5 (i.e. the new version that I am upgrading to).
So the Reader version listed in GUI does not match that shown in the executable property box.
This is the second time that this has happened with a Windows 7 PC. I've never experienced this sort of thing with a Windows XP PC.
Why is the version number different in the GUI? Where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?

Let me clarify that the tool posted on http://labs.adobe.com/downloads/acrobatcleaner.html is not the uninstaller for Reader. Instead it is a cleaner tool used for any botched up installation as mentioned above. This utility should only be used in rare circumstances. Instead reader has its own uninstaller which can be used through ARP (Add Remove Programs) in Windows or you can also use the command line "msiexec /x AcroRead.msi" to uninstall Reader.
Thanks,
Vinod

ORA-12060: shape of prebuilt table does not match definition query

Oracle version: 11G Release 2
When Iam trying to create a Materialized view with on prebuilt table syntax I am facing the below issue.
Create table sample_table as select col1,col2,col3 from sample_view;
table created.
Create Materialized view sample_table on prebuilt table refresh complete on demand as
select col1,col2,col3 from sample_view;
I am getting the below exception
Error report:
SQL Error: ORA-12060: shape of prebuilt table does not match definition query
12060. 00000 - "shape of prebuilt table does not match definition query"
*Cause: The number of columns or the type or the length semantics of a
column in the prebuilt table did not match the materialized
view definition query.
*Action: Reissue the SQL command using BUILD IMMEDIATE, BUILD DEFERRED, or
ensure that the prebuilt table matches the materialized view
definition query.
How to resolve this issue?

SQL> create table sample_table as
2 select owner, table_name, tablespace_name
3 from dba_tables
4 where rownum < 11;
Table created.
SQL> Create Materialized view sample_table on prebuilt table refresh complete on demand as
2 select owner, table_name, tablespace_name
3 from dba_tables;
Materialized view created.What issue?
Which leads me to ask what version of Oracle you have because we don't know.
SELECT *
FROM v$version;

What does IO Exception "Server Certificate subjectDN CommonName received does not match Server hostname" mean?

While trying to establish a SSL Link to a URL Connection, I got an IO
Exception "Server Certificate subjectDN CommonName received does not match
Server hostname" on the destConn.getOutputStream().
What does this mean? And how do I fix it?
System.setProperty("https.proxyHost", "xxxx");
System.setProperty("https.proxyPort", "0000");
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
URL destURL = new URL("URLaddress");
URLConnection destConn = destURL.openConnection();
((java.net.HttpURLConnection)destConn).setRequestMethod("POST");
destConn.setDoInput(true);
destConn.setDoOutput(true);
URLin = new PrintWriter( new BufferedWriter(
new
OutputStreamWriter(destConn.getOutputStream())));

Hi,
I was wondering if there was a solution for this. I am using the certficates and
keys that came with the installation of 6.1. Do I have to regenerate them in order
to use them in weblogic. I am getting this same error when I try to run the SSLClient
class in the examples.security.sslclient.
Jerry <[email protected]> wrote:
Hi Terry,
The server-side certificate has a DN (distinguished name) embedded in it.
This usually looks like a full hostname -- something like www.mycomputer.com
When you make the reaquest
URL destURL = new URL("URLaddress");
The string for "URLaddress" should match the DN of the certificate on the
server that you are requesting a connection to. It needs to match because
there is a compare of the DN in the cert, to the requested host.
In other words, if you are connecting to www.mycomputer.com, then the server
running on www.mycomputer.com should have a certificate with the DN
www.mycomputer.com
Then, when the match of the certificate DN to the requested host is done,
it
will succeed.
Right now, this match appears to be failing for you.
Cheers
Joe Jerry
Terry Treadwell wrote:
While trying to establish a SSL Link to a URL Connection, I got an IO
Exception "Server Certificate subjectDN CommonName received does not match
Server hostname" on the destConn.getOutputStream().
What does this mean? And how do I fix it?
System.setProperty("https.proxyHost", "xxxx");
System.setProperty("https.proxyPort", "0000");
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
URL destURL = new URL("URLaddress");
URLConnection destConn = destURL.openConnection();
((java.net.HttpURLConnection)destConn).setRequestMethod("POST");
destConn.setDoInput(true);
destConn.setDoOutput(true);
URLin = new PrintWriter( new BufferedWriter(
new
OutputStreamWriter(destConn.getOutputStream())));

[JGSS] AP_REQ token id does not match! while acceptSecContext

I am try to use Java jgss as server side program to accept c++ client on windows xp and the security mechanism is Kerberos V5 then i got these exception messgae:
Defective token detected (Mechanism level: AP_REQ token id does
not match!)
what is the possible problem ?

Any suggestions?

Page navigation in Acrobat does not match page numbers in the document

Similar Messages

Maybe you are looking for