Pages Sequence in Smartforms

Hello Masters,
I am new in SAP ABAP , i need your help , i am creating a Smartform for Appointment letter, there are 3 pages in the smartforms , each of the 3 pages has 3 main windows(main windows are empty) work has been done on other secondary windows, by right clicking windows and inside that in attributes i have given page 1 -> page 2 and very happily i am getting both the 2 pages in my output , bu the problem arises when i create the page 3 ,in the page 2 i have again given the attributes inside the command go to next page and selected page 3 in the page 2 window but i am not getting the third page , i dont understand when i have applied the same logic with page 1 --> page 2 , why i am not getting page 2 --> page 3, why its not going on to the page 3.in page 3 i have given it to page 1 and also tried page 3 itself but nothing is working for me , i need a big time help from u masters .
Regrads
Nishant

Hi Nishant,
Its not enough to have data in secondary windows.
The page break command will triger explicitely if there is data to be written in main window.
You have done it from page1 to page 2 using command.
but in page 2 no main winow is triggerd so next command is not trigeerd and page 3 is not trggerd.
hope you are  getting what i mean to say.
So you have to follow the logic i given in earlier thread.
hope this will help.
dhiraj,

Similar Messages

  • How not to print all the pages of a smartform? (for tr F150 - Dunning)

    Hi Forum
    We have the follow situation:
      For DUNNING (transaction F150) the user want stamp 3 diferents SMARTFORM.
       For the first time the transaction is executed is required only a list of documents, for the second time (via sample printout, indiv dunn notice or dunn history)  once the legal data of the customer is updated, the user wants the list of documents, a letter for the lawyers and a letter for the client, in the follows executions  (3 and up) the user can require only the list of documents or all smartforms (list and letters)
      Via customizing we can control the normal dunning and the legal dunnig, but once the client is in legal status the transaction create only the legal smarforms.
    We found  an user exit associated  EXIT_SAPF150D_001. in the F150 transaction, but is not complete, in sense that are failed some parameters .
      Another option is create an unique smartform with 3 pages where we can control the case for the print, but here is where we ask: How we can do to print a specific page of the smartform without print all of them (how can we print the 2nd and 3rd page without print the firs one) ??
    To control the 3rd execution, we can create a dictionary table with a flag .
    Thank you for your help

    You could create a report containing all the single reports in one using UNION. This report could be placed on a "hidden" page. The link for downloading that report you can place on your page. That should work.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    https://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

  • How to use different page scapes in smartforms

    hi
    How to use different page scapes in smartforms.
    I want Potrait format in the 1st page and Lanscape format in 2nd page is it possible if so plz suggest me an idea

    Hi,
    It is possible in smart forms, but not in scripts.
    we can have 3 tabbed options for pages in smart forms.
    <b>General...
    Output options
    Conditions</b>.
    In <b>output options</b> u can define whether a page can portrait or land scape in <b>print attributes</b>.
    Reward if helpful.
    Regards,
    Sandhya

  • How to put page break in SMARTFORMS

    Hi Guys,
              Can anyone please let me know How to put page break in SMARTFORMS
    Regards
    Avi

    Hi,
    Look at the below thread, you will get the answer
    https://www.sdn.sap.com/irj/sdn/profile?userid=2522810
    Regards
    Sudheer

  • Application Builder: What is the significance/function of "page sequence"?

    Because we are always pressed for time, I have developed the nasty habit of glossing over things that may be opaque to me, with the mental reservation that I will re-visit the issue "when things calm down".
    One of those opaque things is the function, significance, or use of "sequence" in the context of APEX Application Builder and application pages.
    I am working through the Oracle-By-Example application labeled OBE_PROJECTS. I have created the Master-Detail form, but it has not come out as expected. According to the instructions, when I created the page, I designated the home page as its parent. Yet, when I run the application, the icon for the master-detail form does not appear.
    I assume that I've fat fingered something when I built the page and attempt to correct it. I think that the answer will lie in the task "Reparenting page hierarchy". When I look at the "Create/Edit Breadcrumb Entry page", I see in the "Entry" region, that the Parent Entry is, indeed, correct ... that is "Home (Page 1)". On the other hand, the text box labeled "Sequence" is set to "10". And this is the same value as the Home Page itself. Can that be correct? Shouldn't my Master-Detail page have a sequence number subordinate to the Home Page?
    Any help/elucidation will be appreciated.
    Regards,
    Gus

    Varad,
    I hadn't gotten that far yet. I'm still following OBE script and accessing the page from the "Run Page" icon in application builder.
    The issue itself, pages not showing up, is solved for me. I had anticipated that simply declaring the parent of Master-Detail page to be home page would automagically make those objects appear on the home page.
    Slogging through the Oracle By Example, I learn that one must actually edit the home page to have them appear (how barbaric!)
    But, the question of exactly what "page sequence" means and how it's supposed to be used is still there.
    Thanks for the Response,
    Gus

  • Different page orientation in SMARTFORMS

    Hi Experts,
    Is it possible to have different page orientation (portrait/landscape) for different pages in one smartforms? Thanks so much!
    Best Regards,
    randy

    Hi,
    Yes, it is.  Go to the output options of the page and select the portrait/landscape option.
    Regards,
    Nick

  • Reset Page number in Smartforms

    Hi,
    I have a smartform with a page break when ever the ship to party of the line item changes. In the output I have page counter (e.g. Page 1 of 10). Currently the total number of pages is same as the total number of pages in the spool and is supposed to happen like that. But what I need is, for each ship to party the total number of pages must be calculated separately. For example, for the first ship to party if there are 3 pages, the page counter should be 1 of 1 to 1 of 3, irrespective of the total spool pages. For the next ship to party it should repeat the same.
    Can somebody help me on this please?
    Thanks
    Vinod

    Hi ,
    Please find the link below
    How to set Page Break/ Page Reset in Smartforms using EventsHow to set Page Break/ Page Reset in Smartforms using Events
    Hope this would help.

  • Create coustom page size for Smartforms

    Dear All
    How to create coustom page size for smartforms.
    rgds
    pramod

    HI
    To define a new page format, choose
    Administration -> CCMS -> Print->® Spool Administration.
    Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and  Create or  Create with Reference. Fill out the fields on the next screen.
    Activating a New Page Format
    Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
    You also have to define a format and device type format for the new page format before you can use it.
    Thanks and Regards
    Santosh   Kate

  • Whats mean by multiple page formats in smartform?

    Hi! 
      Can u pls tell me whats mean by multiple page formats in smartform?
       Thanks
        Imran.

    Hi Imran,
    multiple page formats in smart forms means...
    the first can be landscape, and the second one portrait...viveversa is also possible
    go with tcode:smartforms,specify some name and go with create.place the cursor on 'Pages and windows' folder.on right side we will have option page format:go with f4 .u will find many page formats.
    Reward points if helpful.
    Regards,
    Omkar.

  • New Page COmmand in Smartforms

    Hi,
    My requirement is as follows,
    Whenever the item number changes it has to generate a new page with the header
    Whenever an item overflows it should come in a new page without the header details.
    So for this I have two pages in my smartform.
    Page1 - Header with item details
    Page2 - Only item details without the header
    I have given Page1's next page as Page2. And I have given a command whenever the item no changes it should go to Page1.
    But whats happening now is whenever a new page is generated only Page 2 is coming and not the Page 1.
    Any ideas??

    Hi ,
    u want like this right ...
    assume  that  table  data
    item                            item desc                              qty
    10                              10item descripotion                 23
                                        for material      
    20                               20item descripotion                 33
                                         for material      
    O/P Like  This u want
    *page1
    item                                    item desc                            qty
    10                                       10item descripotion            23
    page2  (dont want  want headers only remainning data of the line item)
                                              for material      
    For this simply u can put your header  in the main area of the table  (leave header as blank)
    Let me know if any concerns........
    Regards,
    Lokesh.

  • Displaying Page Number in Smartforms

    Hi,
    I'm doing a page break in smartforms by date. In my output, the page number displays Page 1 of *  (instead of Page 1 of 11) but when it displays 2 digits for the field SFSY-PAGE, it displays the total number of pages. (e.g. Page 10 of 11). I used the system fields (Page sfsy-page of sfsy-formpages). I just want to ask if any of you has an idea or have experienced this kind of error. Your help is highly much appreciated. Thanks!

    Hi
    current page / total number of pages
    &SFSY-PAGE& / &SFSY-JOBPAGES&
    Go through the link given below :
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/0c145cd30111d3b568006094192fe3/frameset.htm
    With Regards
    Nikunj Shah

  • How to avoid that every page of a smartform is going to be printed out

    Hi,
    I have following problem. In my smartform I builded different pages (like a cover page, different lists etc.). The user should decide by setting parameters what lists he want to print. So if he don´t need the cover page, it should not be printed out.
    Is there any way to set this up in the smartform? Right now, the printing parameters (what the user wants to print) are stored in an internal table and should be processed in the smartform. My problem is that there is no way to implement conditions on a page in a smartform.
    Please let me know if somebody has a solution for this requirement.
    Thanks a lot,
    John Caspar
    <MOVED TO CORRECT FORUM BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 15, 2009 8:49 AM

    Hi Micky,
    The external debugging works. Thank you very much!
    And how can I reward you?

  • I don't want to print the last page of a smartform when there is no content

    I don't want to print the last page of a smartform when there is no content. Kindly help

    If the last page is printed, there are two possibilities
    -1- The MAIN WINDOW is only in this page
    -2- The page is explicitly printed from another page (new-page)
    -3- There is date but its only space or skip line.
    So in your form
    -1- Redefine the logic of your form
    -2- Check that, there are some data to be printed before calling the NEW-PAGE
    -3- Do skip or write space lines before printing an actual line and not after
    Regards

  • Regarding PDFs, How do you eliminate pages, change page sequence, and add a page?

    Sometimes, I need a multiple page document modified by either eliminating pages, change page sequence, or add a page to it. Does the Adobe Reader XI have an app that can be purchased to do all this?

    Adobe Acrobat is the program you'd use to modify a PDF. Reader is not able to make the changes you mentioned. Acrobat Standard is able to do all of the things you mentioned, as is Acrobat Pro.

  • Page number in smartforms

    HI guys,
    How can I put the page number of smartforms?
    Thanks!

    Hi
    current page / total number of pages
    &SFSY-PAGE& / &SFSY-JOBPAGES&
    Go through the link given below :
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/0c145cd30111d3b568006094192fe3/frameset.htm
    With Regards
    Nikunj Shah

Maybe you are looking for