PageViewer - Change the Version of IE To Be Used

I have a site/page set to display with IE9 which utilizes HTML5. However, I am adding a pageviewer webpart which will only display properly if run in IE8. Any ideas? If I set the whole site to IE8, then the HTML5 footers and other special
coding does not work. I need to be able to differentiate the pageviewer browser mode from the rest of the site. THANKS!

Hi,
Per my knowledge, we could not set the web part IE version separately with the page/site.
If you need to use the page viewer web part, as a workaround, we can use the IE 10, then set the document compatibility to IE 8.
The statement <meta http-equiv="X-UA-Compatible" content="IE=8" /> forces document compatibility to IE8, we can put it in the master page.
In SharePoint Designer 2013, open the master page which is under used, find the statement here, change the number to 8:
Save and re-open the site page, the Document Mode of IE will be IE8 standards.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

How do I change the Version Code in the Flash Android settings Android app market?

I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
"The new apk's versionCode (1000000) already exists."
In the Flash Adnroid settings I changed the version label but that did not help.
So I have two questions:
How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
What is the difference between the version number and version label?

I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
This is the what the XML file says:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/2.6">
<id>com.company.nameofapp</id>
//Below is the correct version number, but has no relation to the version code.
<versionNumber>1.1.0</versionNumber>
<versionLabel>NewLayout</versionLabel>
<filename>Name of app</filename>
<description/>
I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html) But I don't know how to place it into the xml file without conflicting with other code.
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      package="com.example.package.name"
      android:versionCode="2"
      android:versionName="1.1">
    <application android:icon="@drawable/icon" android:label="@string/app_name">
    </application>
</manifest>
Any other thoughts are much appreciated.

How do I change the Version Code in the Flash Android settings for the Android app Market?

I recently tried to update my app in the Android app market and when I uploaded it I got the following message:
"The new apk's versionCode (1000000) already exists."
In the Flash Adnroid settings I changed the version label but that did not help.
So I have two questions:
How do I change the Version code in the Flash Android settings? I changed the version number and version label but that did not work.
What is the difference between the version number and version label?

I tried that but it did not work. Apparently there is a difference between the version code and version number (which is set in the Android settings). From my research the version label is optional, so there are no problems there.
This is the what the XML file says:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/2.6">
<id>com.company.nameofapp</id>
//Below is the correct version number, but has no relation to the version code.
<versionNumber>1.1.0</versionNumber>
<versionLabel>NewLayout</versionLabel>
<filename>Name of app</filename>
<description/>
I did find this piece of information for Androin version codes. (http://developer.android.com/guide/publishing/versioning.html) But I don't know how to place it into the xml file without conflicting with other code.
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
      package="com.example.package.name"
      android:versionCode="2"
      android:versionName="1.1">
    <application android:icon="@drawable/icon" android:label="@string/app_name">
    </application>
</manifest>
Any other thoughts are much appreciated.

Is it possible to change the version of Flash Player that Adobe Reader 9 uses?

I'm currently attempting to put some flash content within a pdf using the new Rich Media extensions. I have a working Flash .swf that uses some of the newer methods that only Flash Player 10 supports. The file can run on its own within Flash Player 10, but inside Adobe Reader 9 the flash player version is set to WIN 9,0,159,0 and the .swf file does not work. Is there any way to change the version of the Flash Player used in Adobe Reader 9?

Try code like this:
<pre><nowiki>#window-controls .toolbarbutton-icon {
width: 25px !important;
height: 25px !important;
</nowiki></pre>
The three buttons have these IDs:
<pre><nowiki>#minimize-button
#restore-button
#close-button</nowiki></pre>

The Appcache file is not updated even if I change the version. any changes concerning version 34.0

I have been working with the Appcache service in Firefox for the last 6 months and everything went fine. until the last update 34.0 . even if I change the version of the .Appcache file it seems that the browser doesn't take it into consideration.
the same code snippet work on IE and Chrome.
is there something I should be aware of since the last update.
thanks for your help :)

Chris, I'm embarrased I hadn't thought of trying your tip. It worked like a charm. Thanks.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

http://support.apple.com/kb/ht1311

Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you

Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you

The hardware on the 2G does not support an iOS version higher than 4.2.1. If you want apps that require a higher version you will need to get a newer model iPod.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

Can I change the version of my imac, from 10.7 to 10.5?

Can I change the version of my imac, from 10.7 to 10.5?
Thanks!

No, 10.5.x is a PPC OS, 10.7.x is for intels only. In addition, you can't install an OS that is earlier than the one your machine came with.

Please help!! How can I change the version from Chinese to English?? Many thank!!!

Please help!!
I have download the photoshop, but its Chinese version, I need English one...
How can I change the version from Chinese to English??
Many thank!!!

Read http://forums.adobe.com/message/5713507#5713507 for instructions.

Until i change the version of the software to 4.3.3 the icon of wifi doesnt appear

until i change the version of the software to 4.3.3 the icon of wifi doesnt appear, what can i do?!

- Try resetting network setting: Settings>General>Reset>Network Setting. You will have to reenter wifi passwords.
- If your problem is wifi is grayed out go here:
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there's no address listed for the device
If you need more help please describe what shows in Settings>wifi

The version of GroupWise you are using cannot access this post office

I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005

*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis

Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

How to change the print page setup in IE using javascript

dear all,
I want to take print out envelope paper size, so i want to chnage the page setup in IE
i want to change the print page setup in IE using javascript

I think, you can do this using CSS.
http://support.sas.com/rnd/base/ods/templateFAQ/Template_csstyle.html

How to replace/Change the JMS MSG ID in MQ using JMS Receiver Adapter

Hi Experts,
I am working on File to JMS Scenario,
My Requirement i need to chnage the JMS Message ID(not XI Msg ID) Value with My custoimer specific Value,
How can i achieve this??
any valuable inputs welcome,
Thanks advance,
Raj

Thanks for your reaply,we can change the value of XI MSG ID using Dynamic Configuration,
Then set the XI MSG ID and then make use of the correlation settings
From the help section:
Correlation Settings
Define the correlation settings.
·        Set JMSCorrelationID To:
¡        XI Message ID (MessageID) (default value)
¡        XI Reference ID (RefToMessageID)
¡        XI Conversation ID (ConversationID)
¡        No Value
But cant we directly make use of the ASMA to configure DCJMSCorrelationID?
Regards,
Abhishek.

PageViewer - Change the Version of IE To Be Used

Similar Messages

Maybe you are looking for