Paging file counter

Hi,
O server we have these page file counters:
\Paging File(\??\C:\pagefile.sys)\% Usage
\Paging File(\??\C:\pagefile.sys)\% Usage Peak
\Paging File(_Total)\% Usage
\Paging File(_Total)\% Usage Peak
But only _Total counter has some values like:
\Paging File(_Total)\% Usage - 29
\Paging File(_Total)\% Usage Peak - 37
Page file is located in C:\pagefile.sys and has manually assigned 4096MB.
My question is why other two counters are 0 and does not have data?
\Paging File(\??\C:\pagefile.sys)\% Usage
\Paging File(\??\C:\pagefile.sys)\% Usage Peak
Thanks.

Hi,
Did your system have the light load?
Or you set the incorrect performance counter? You can refer the following similar thread solution to confirm you performance counter configuration:
The solution in the similar case solution:
win key + r --> perfmon --> add counter --> paging file --> % usage
The case link:
Windows Server 2012 - Page file usage
More information:
How to determine the appropriate page file size for 64-bit versions of Windows
http://support.microsoft.com/kb/2860880/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows no longer boots up, paging file error

I just reinstalled windows on my mac last week because until now I had been running the old beta version of boot camp.
Just a few days ago I started getting blue screens every so often and it happened again (twice to be exact) yesterday, however one of the times it booted up and informed me I might want to change my paging file size. Not quite sure what this was I went and found the paging file option in settings and found it was clicked on a set size...so I figured I'd set it on the option that lets windows decide for me hoping this would fix the blue screen problem.
I shut down my computer later that night and now windows won't get to the desktop.
When I start it up normally it runs the system check (which I cannot skip for some reason) which gets to 84% and then says \windows\Dump3865.tmp is cross-linked on allocation unit 1731772
Above it it mentions there is an invalid size for my page file.
I tried booting it up the in safe mode multiple times and every time it generates a list in dos and stops on windows\system32\Drivers\mup.sys
I really don't want to have to reload windows again. Is there anyway to skip the system check (it says press anykey, but that has never worked for me) or any other way to get my paging files back to the way they were?
Thank you.
Oh I'm running leopard with windows XP professional on a macbook pro (last years model) if that helps in anyway.
Message was edited by: Tommmmm

A. run chkdsk
B. What happens if you boot from XP CD and Repair System
C. system file checker - from command "sfc /scannow"
http://www.informationweek.com/news/windows/showArticle.jhtml?articleID=18530125 1
http://windowshelp.microsoft.com/Windows/en-US/Help/f768809f-ed90-415f-a83f-89b4 2108b3551033.mspx

File Adapter - how to get the file count from a folder

Hi All,
I have a requirement that have to poll a directory when the file count is reached to number N (ex:number of files avilable in folder is 5) otherwise it should wait and not pick any of the files. Is it possible to get the file count from a folder using file adapter ?? otherwise please suggest me an approach to achieve this requirement.
Thanks,
JJ

Hi Sarath,
Thank you for your reply.
Go with the list files operation of file adapter it will gives you the number of files in the specified folder as you given. . - this step is already done.
When the number of files reaches your count startup your webservice that which can polls the files. . . - how can i acheive this?? Have to poll the directory and process the number files - please let me know, what could be added to the webservice which is being invoked after cheking file count from parent process.
The reason for the above question is - we cannot use ReadFile operation in second webservice because it will be automatically triggered when the file is avilable. Also SyncRead operation supports reading one file in b/w bpel process. Kindly explain me the implementation steps.
Thanks,
JJ

Paging File in windows for SAP

Dear Experts ,
I am new to SAP R/3 Basis .I am very much in need to set paging file size to
1GBram + 8GB. but i am unable to increase virtual memory beyond 4096 initial and 4096 max.
Please any one let me know the step by step procedures
Thanks in Advance
Venkata

see here
<a href="http://support.microsoft.com/default.aspx?scid=kb;en-us;237740">http://support.microsoft.com/default.aspx?scid=kb;en-us;237740</a>

Essbase 64 bit on Windows 2003 Server: Windows Virtual cache/ Paging File ?

Hi,
the speed of our nightly calculations seems to differ from day to day between 1 and 2 hours
I am wondering, what the correct setting for the windows paging file is ?
We use Windows 2003 64 Bit Server with 16 GB RAM
We run 1 Essbase application with 80 GB pag files with 4 GB Data Cache Setting and 1 GB Indexcache Setting in EAS console - on that server is actually nothing else running in production mode (just a few essbase-test application, usually offline)
what is the recommended setting on the windows level in the windows system properties for memory usage ?
We have:
Memory Usage: Adjust for best performance of "Programs" ;
Virtual Memory/Paging file on C-Drive: Custom Size, initial Size: 10 GB, maximum size 16 GB
when system was handed over from Oracle, we had 4 GB virtual memory - however in essbase manual, you read that the recommended value should be 3-5 times the physicial ram -
for me, the cache-bevahiour is strange anyway: if I watch taskmanager, I see in the middle of our 1 hour calculation the memory usage of Esssvr.exe Service using 7 GB of RAM, then the 16 GB RAM are used up at some point (paging file is 9 GB )- then suddenly nearly all the RAM get's cleared and ESSSVR.exe memory consumption goes down to 0 and from 0 increasing again-
looks to me, as all the cache for essbase get's deleted in the miiddle of the calculation, because RAM used up for paging files ?
Can anybody explain or give a clear directions, what to check ?
our application operates normally (no abnormal termination, no generation of *.xcp files)
(Essbase is installed on the 500 GB D-Drive)

Hi John,
thanks for the helpful link - the long discussion reminded me again, that pure cores and cache is not all, what makes up a good essbase application -
I will test with calcparallel 6 (in comparison to 4) on our 64bit environment - just to see if I can achieve a 10, 20 or 30% improvement...
In addition, I must admit, that 50% of our 1-2 hour calculation is calculated in serial/ not parallel... so I expect an additional 5 to 10 min improvement, not more.
Thank you for now

File Count with selected date range

Hi,
Our requirement is to get the file count with selected date by the user from two sharepoint date time controls i.e. dtp1 and dtp2 into the data table. I am able to get the file count of specific folder from Pages library through below code. Now need to get
the selected date range from two date time picker controls and check with the item created by is within the date range. If yes I need to get the file count.
So please share your ideas/thoughts to do the same.
SPList list =
wikiweb.Lists["Pages"];
                    SPFolderCollection oFolders
= list.RootFolder.SubFolders["foldername"].SubFolders;
                    DataTable dt
= new DataTable();
                    dt.Columns.Add("Column1");
                    DataRow dr;
                    if (oFolders.Count
> 0)
                        foreach (SPFolder oFolder in oFolders)
if (!oFolder.Name.Equals("Forms"))
                                dr
= dt.NewRow();
dr["Column1"] = oFolder.ItemCount.ToString();
dt.Rows.Add(dr);
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I have modified the code as below
if((DateTime)(oFolder.Item.File.TimeCreated>dtFromDate.SelectedDate)&&(DateTime)(oFolder.Item.File.TimeCreated<dtToDate.SelectedDate))
But still it is throwing the error.
Please share your ideas on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Where is the file count in a finder window?

Where is the file count in a finder window now? I have nothing in any of the view modes.

From the Finder Menu bar View > Show status bar

ESE - Event Log Warning: 906 - A significant portion of the database buffer cache has been written out to the system paging file...

Hello -
We have 3 x EX2010 SP3 RU5 nodes in a cross-site DAG.
Multi-role servers with 18 GB RAM [increased from 16 GB in an attempt to clear this warning without success].
We run nightly backups on both nodes at the Primary Site.
Node 1 backup covers all mailbox databases [active & passive].
Node 2 backup covers the Public Folders database.
The backups for each database are timed so they do not overlap.
During each backup we get several of these event log warnings:
Log Name:      Application
Source:        ESE
Date:          23/04/2014 00:47:22
Event ID:      906
Task Category: Performance
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EX1.xxx.com
Description:
Information Store (5012) A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation.
See help link for complete details of possible causes.
Resident cache has fallen by 42523 buffers (or 27%) in the last 903 seconds.
Current Total Percent Resident: 26% (110122 of 421303 buffers)
We've rescheduled the backups and the warning message occurences just move with the backup schedules.
We're not aware of perceived end-user performance degradation, overnight backups in this time zone coincide with the business day for mailbox users in SEA.
I raised a call with the Microsoft Enterprise Support folks, they had a look at BPA output and from their diagnostics tool. We have enough RAM and no major issues detected.
They suggested McAfee AV could be the root of our problems, but we have v8.8 with EX2010 exceptions configured.
Backup software is Asigra V12.2 with latest hotfixes.
We're trying to clear up these warnings as they're throwing SCOM alerts and making a mess of availability reporting.
Any suggestions please?
Thanks in advance

Having said all that, a colleague has suggested we just limit the amount of RAM available for the EX2010 DB cache
Then it won't have to start releasing RAM when the backup runs, and won't throw SCOM alerts
This attribute should do it...
msExchESEParamCacheSizeMax
http://technet.microsoft.com/en-us/library/ee832793.aspx
Give me a shout if this is a bad idea
Thanks

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

Returning the file count of a folder--too slow

I am using the following to return the file count of a folder as part of a larger script
with timeout of 5000 seconds
tell application "Finder"
set origFolder to "Somefolder" as alias
set thePivotfiles to (every file of origFolder whose name ends with ".jpg")
return the count of thePivotfiles
end tell
end timeout
This script is rather slow to return the count of thePivotfiles--there are about 15,000 image files in the folder.
Is there a faster way for the script to do this?
Thanks.
Pedro

try using a shell script, something like :
do shell script "cd ~/SomeFolder; ls -a | wc -l"
more info here: http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
.... btw, this is the Final Cut Pro forum. :/

Customizing Paging File: what is the recommended initial and maximum size?

Hi everyone, and Harm,
Following Harm's response to my question about how to setup disks, Harm said this:
"disk allocation: It is a three stage process, first you define the boot order in the BIOS, then you format the disks inWindows and allocate drive letters, then still in Windows you setup the pagefile. Then the allocation of media cache, preview, project etc. is done in the preferences and project setup of PR."
and I have a question about paging file.
First let me say describe my new machine, it has a 4 disc setup, no RAID, 16GB RAM, with OCZ-Vertex3 for OS & Programs, i.e. i have installed Windows 7 Ultimate 64bit on this disc, and Web Premium CS5 and Acrobat Pro 9. In BIOS, i have made the OCZ (OS) disk, be the priority in the Boot order.
Later, after verifying the system is in working order, i will upgrade to Classic Collection CS5.5, so at this point, i have named my 3 additional disks as such,
WDC WD 2002FAEX-007BA0 - "Media Projects(D)"
WDC WD 1002FAEX-00Y9A0 - "Pagefile, Media Cache (E)"
WDC WD 1002FAEX-00Y9A0 - "Previews, Exports(F)"
So, for now these are simply names, which i have given to the various disks, and now i am changing the paging file, switching it from happening in the OS disk, in order to happen inthe disk which (via Premier, later) will be designated for Media Cache.
So, in Windows Performance Options pane, I went to Advanced tab, & under Virtual memory I hit "change", uncheck Automatically manage paging file size for all drives, select drive E, which is the disk that's to have the paging file happen in it.
And the question, assuming that i am supposed to select Custom size, can you Harm, or/and others, please recommend the Initial and Maximum sizes?
Or, should i select "System managed size"?
Thanks:)

http://lifehacker.com/5426041/understanding-the-windows-pagefile-and-why-you-shouldnt-disa ble-it
Keep in mind Video/Animation applications use more ram now than almost any other type and there are far more memory hungry services running in the background as well. Consider the normal recommendations are for standard applications. HD material changed far more than just the need for 64Bit memory addressing.
Eric
ADK

How to get the FILE COUNT from File directory

Hello,
i have to develop a scenario like, get the file count from source file directory and validate whether the file count is 5 or not. if 5 files exist i need to process those 5 files to DB tables. if file count is not equal to 5 then i need to send a mail to customer that files are missed at source directory. (subject as files were missed at source directory and in content i need to display the file names exist at source file directory. So that missed file will be generated by the customer based on this mail).
Could you please let me know how to get the count of files from source file directory. if it is possible only with UDF please provide the Java code
Best Regards,
SARAN

Do these files have some fixed names?
Can you try to use the option Advanced Selection For Source File to make XI pick all 5 files in one shot?
Check this blog on the same -
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
If this is not a option - BPM sounds the only possible way.
Regards,
Bhavesh

FF14 paging file usage

After some time of inactivity firefox starts offloading its ram continent to paging file, this results in firefox not responding until it load it's continents back from paging file to ram (usually takes up to a minute). How do I turn off paging file use? (I can't turn off paging file entirely due to other programs).

Firefox can't control that.<br />
It is the Windows Operating System that decides which memory pages to swap to disk t make room for other programs.
If it happens that often then it sounds that you do not have enough memory installed or try to run too many programs simultaneously and Windows runs out of memory.

Reoccuring errors with volume file count, directory count, etc...

I'll give a little back story...
I purchased a new MacBook Pro 17" with OS X Lion (10.7.2) preinstalled back in January of this year (2012). I migrated my user accounts from my old MacBook Pro 15" (2008) running OS X Snow Leopard. Almost right away I started having issues of all sorts, including Admin accounts that wouldn't allow me admin priveledges, hidden user groups, apps that wouldn't run, multiple obscure error messages and a host of other issues. After scouring forums like this one I used Disk Utility and not only discovered innumerable permission errors but also disk errors like these:
Invalid volume file count
(It should be 1656658 instead of 1656636)
Invalid volume directory count
(It should be 345764 instead of 345743)
Invalid volume free block count
(It should be 69344839 instead of 69355225)
Volume header needs minor repair
Disk Repair would correct the ACH/permission errors and above-noted disk corruption, but only temporarily. After repairs I would reboot and be met with all of the same problems in the migrated accounts. Over the following days I reinstalled OS X Lion at least three or four times, completely wiping the 750 GB hard drive before two of those reinstalls (even doing one-pass reformatting on one of those instances). After reinstalling the OS, I would reinstall from TimeMachine and be met with all of the same problems again.
I then brought my machine in to the Genius Bar where, after more than two-and-a-half hours they declared it to be an unknown issue that must be related to defective hardware and replaced my entire machine. But wait - there's more!
After getting home and moving my old accounts back over from TimeMachine all the same issues began reoccuring. After at least two more OS reinstalls later I discovered that uninstalling Norton Internet Security seemed to fix some problems. However, running Disk Utility still returned results like those listed above...
Then there were the failed attempts at upgrading from 10.7.2 to 10.7.3 which hung at the end the first two times and required complete OS reinstalls from the Recovery HD. Several more headaches later I eventually I managed a sucessful upgrade.
But still I find myself with a machine that stalls on boot-up at least once or twice a week, necessitating a power-off to interupt the process. After each of these instances I run Disk Utility and get more of the same...
Checking volume information.
Invalid volume file count
(It should be 1656658 instead of 1656636)
Invalid volume directory count
(It should be 345764 instead of 345743)
Invalid volume free block count
(It should be 69344839 instead of 69355225)
Volume header needs minor repair
The volume [...] was found corrupt and needs to be repaired.
And now, this morning, after a month or two of all that... and after installing the Java Security Upgrade last night, I can't get into my accounts at all. On first boot-up it hung for 20 minutes before I shut it down. After running Disk Utility from Recovery Drive and repairing the drive I rebooted and got the log-in screen. I clicked on my user icon, typed the correct password, was shown they white/grey screen for a few flickering seconds then was brought back to the log-in screen. I rebooted to the Recovery Disk, ran Disk Utility, saw all the same errors again, repaired the disk, rebooted and got the same problems with logging in again.
I've repeated this cycle five times today, as both a normal boot-up and in "Safe Mode" all with the same results. I've repaired the disk using Disk Utility from Recovery Disk as well as accessing the disk in Target Mode, and always there are the same errors needing to be repaired.
I don't buy that I'm dealing with a hardware issue. My antivirus and security software are all up-to-date. What the heck is going on? Why do I keep having these disk problems? Why can't I access my accounts anymore? Why does it keep hanging during boot-up? Why am I about to throw the machine out my bedroom window?

WithoutID wrote:
I don't buy that I'm dealing with a hardware issue.
You have a software issue carried over from the previous computer likely caused by Norton and perhaps some other issues related to recent malware.
Your going to need to copy your users data folders only to a external drive and disconnect everything,
command r boot into Recovery,
DU erase (with Zero) your Lion partition,
install Lion fresh from Apple,
setup with the same name (important),
Software update,
install all your programs from fresh sources,
and return files from the external drive manually into their respective folders
in that precise order.
and for good performance for a long time, try not to go over 50% of the drive filled, but certainly not more that 75%
Do not use migration or TimeMachine restores.
This is known as a Fresh Install, where everything is brand spanking new and only vetted files are returned.
It's a pain I know, the problem with too much automation, the crap seeps in and ruins everything.
I don't migrate nothing, I like my machines to work perfectly.
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

File Count using SPFile Object

Hi,
I am trying to get the file count using through SPFile within the selected dates of date time controls as below.
But not able to get the count of the files in the folder as there is not count property in the SPFile object.
Please share your ideas/thoughts on the same.
foreach (SPFile file in oFolder.Files)
if ((file.TimeCreated > dtFromDate.SelectedDate) &&( file.TimeCreated<dtToDate.SelectedDate))
int filecount;
Regards,Sudheer
Thanks & Regards, Sudheer

Hi ,
as you have int filecount, increase the count whenever it satisfies the if condition as mentioned
above.
int filecount=0;
foreach (SPFile file in oFolder.Files)
if ((file.TimeCreated > dtFromDate.SelectedDate) &&( file.TimeCreated<dtToDate.SelectedDate))
filecount++;
Thanks,
Vivek
Please vote or mark your question answered, if my reply helps you

Paging file counter

Similar Messages

Maybe you are looking for