Pal dvd settings

I have accidently deleted all the apple dvd settings out of compressor 3. Ive been told the only way to get them back would be to re install final cut studio. Its not possible for me to do this at the moment.
Would it be possible for any one who works in pal and makes pal dvds to recommend settings to me. I only have one setting at the moment which is constant bit rate to make preview disks.
Thanks for any help

Here is a guide to help you if you want to uninstall and reinstall compressor only.
http://www.digitalrebellion.com/blog/posts/howto_reinstall_compressor_andqmaster.html

Similar Messages

Urgent: Progressive possible for PAL DVD?

Hi all
I'm making NTSC and PAL versions of the same DVD.
On the NTSC version we have encoded all the menus (short movies created in FCPX) as 23.98 progressive in Compressor, to stop the title text flickering due to interlacing. This worked perfectly, no more flickering text.
For the PAL version however Compressor's PAL DVD settings only mention 25i, no progressive options seem available.
Any suggestions on how to repeat this on the PAL side?
Thanks everyone - Jon

If you're creating a DVD, there's really no choice of codecs, since DVD video is a very specific and tightly constrained form of MPEG-2 video. MPEG-2 video is highly compressed and is not a high-definition format, so it is absolutely unavoidable that export to DVD video will cause some quality loss. This is true for even professionally created DVDs. There is an MPEG-2 DVD export preset in After Effects that you can choose from the Format menu in the Output Module Settings dialog box.
If, however, you're handing off your video as input to a larger work, and you need to create an intermediate file that preserves all detail for as long as possible in the post-production pipeline, then you should render and export using lossless encoding. My preference for creating losslessly compressed intermediate files from 8-bit-per-channel sources is the PNG video codec in a QuickTime (MOV) container.
See this FAQ entry (and the pages that it links to) for more information about compression and choosing settings for specific purposes:
http://forums.adobe.com/thread/729526
You mentioned "jerky" output. See this FAQ entry for information about losslessly encoded movies and how they are not suited for playback:
http://forums.adobe.com/thread/684381
Or perhaps the jerkiness is coming from the frame-rate mismatch between your 30fps source and 25fps composition. If so, then frame blending can help.

NTSC to PAL DVD

I am attempting to make a PAL DVD in DVDSP 3. I changed the disc and encoding settings to PAL and encoded my stand alone movie from media 100 which was 720x480 as PAL.
I watch the DVD on my g4 apple dvd player and it's fine, but when I watched it on my apex dvd player, I saw these lines running across horizontally. Thick lines, mostly on fast motion, but other places too.
When my client watches the same dvd on his computer, (mac 0s 9 i believe) he sees what I see on the apex.
Question: Is this normal, since my monitor is NTSC to see these lines? Normally when I've watched a PAL piece on a PAL player on an NTSC monitor, I see color problems and tracking problems... but not these lines...
Also: What is good for a stand alone program, to convert files from NTSC to PAL?
Thanks in advance to anyone who can help me.

You can't just encode from one standard to another
You need to use a standards converter, or have original PAL footage
What do you mean by "I changed the disc and encoding settings to PAL and encoded my stand alone movie from media 100?"
Just changing to PAL in DVD SP if the original footage is NTSC doesn't change the source footage and creates a PAL DVD.

Output to create Region 2 PAL DVD Problem

I recently completed a 35 minute sequence, with my Audio/Video settings for sequence set as DV PAL 48 Khz. I exported a QT movie set at DV PAL 48 Khz. I then used this file with Roxio Toast set to PAL to burn a DVD. The burn was done on my G4 Powerbook, which is currently set to REGION 1. When the DVD was complete, it plays perfectly on a televison monitor connected to a REGION 2 DVD PLAYER. BUT, it seems that it won't play on a computer where the DVD drive is set to region 2. The error message is something like: "Unrecognizable DVD." Did I make an error in the FCP output? What might be the source of this problem? Any suggestions on how to use this FCP QT output to create a DVD that will play via a computer as well as a DVD player for region 2?

Pamela:
Something else. I cannot found in my Toast 7 settings any reference to "region" in DVD settings. I'm pretty sure that Toast (and even iDVD) creates region free video discs.
Video standard (PAL or NTSC) has no relationship with region settings.
DVDs from Europe are PAL and region 2 but those are independent settings when authoring the disc: PAL content doesn't mean "automatic" region 2.
In pro authoring applications (like DVDSP) you can set the region to anything you want no matter the video standard (PAL or NTSC).
EDIT
Just to confirm that iDVD creates Region Free discs:
http://discussions.apple.com/thread.jspa?messageID=2679283&#2679283
Hope that helps !
Alberto

Problem with making 16:9 PAL DVD

Hello!
I'm trying to make a 16:9 PAL DVD in Adobe Encore and everything is perfect untill I play the DVD on my TV (it works just fine on my computer). Two videos included in the DVD were made in Adobe Premiere and one of them works without any problems (it is just a slideshow), but part of the other footage isn't shown on the TV - the video is being played on the TV with no black lines around it, but it is like cropped. The video was made in 16:9 and I've also checked the settings on my DVD player, which look just fine to play a 16:9 DVD. I think that this problem had occured while making the DVD in Adobe Encore and I'd like to know how to solve it if anyone of you can tell me how.
Thanks for your help.

OK, the PrPro Project/Sequences are set to 16:9 PAL and Exported as that, into an Encore 16:9 PAL Project, right, or did you use Adobe DL for transferring the Assets over?
On a computer, the DVD plays fine, but part of one of the Timelines is black, when the DVD is run on a set-top player, hooked to a TV. The other Timeline is shown much smaller, with black bars around it. Is that correct?
Can you test the DVD on another set-top player, and another TV? Maybe stop by your local electronics store and ask them to play it for you. What happens there?
As there are differences in the setting of both players and TV's regarding wide-screen, it could be as simple as those settings. However, that would not explain why half of one Timeline is black. Now, poor choice of media, or too high a burn rate could account for some of that.
What media did you use, and what was the burn rate?
Good luck,
Hunt

Flash - SD Widescreen PAL DVD

Hey everyone, I did post this one level back as another topic, but then started reading around and figured this may be a better place to post. I apologize for the double post, won't happen again - I'm new to the user forums here and I admit that this is a bit of a desperate plea for help. I apologize in advance.
So, I've been working on a project recently that's been kind of difficult for me to test since I don't have access to the platform I'm trying to develop for. I was hoping somebody might be able to help guide me to the information I need, or let me know outright if I'm on the right track or completely out to lunch with my thinking here.
Anyway, shorthand version of what I'm trying to accomplish: I'm trying to design a 16:9 wide screen video animation. I built the animation using Flash CS3. Originally it was built for NTSC but now needs to be burnt to DVD in a PAL format. I re-sized my animation to be 1024 x 576 (square pixels) at 25 FPS and exported it from Flash as a .mov using the Animation Codec. (Exported with 16:9 PAL settings at 720x576 with a pixel aspect ratio of 1.422.) I brought the new rendered file into Adobe Encore and set up my chapters etc. All footage has been interpreted as SD PAL Widescreen 1.422 PAR.
When I view the Movies I export from flash (off my desktop) they are 1024 x 576 square pixels ... they appear distorted and aliased. After burning the videos to DVD with the footage interpreted as previously mentioned, I tried viewing them on my computer. The screen capture resolution is 720 x 404 ... which is kind of odd to me. I would expect 720 x 480 or even 720 x 576. Overall though the quality is pretty nice and doesn't look greatly distorted.
I guess what I'm trying to ask is: Is that normal? Is that right? wrong? Ultimately though, does anyone know what a Widescreen PAL DVD would look like viewed on a windows XP machine? (In Windows Media Player with a DVD Codec?)
Any guidance or help on this would be greatly appreciated. If there is any other information I can provide you with to help with understanding my plight, please let me know.
I'm a web designer backed into a corner here and really don't have a whole lot of video experience. I'm also living in Canada and don't have access to a PAL system to watch the final product on ... so I'm just trying to get my settings as accurate as I can on my end.
Thanks in advance.

>The screen capture resolution is 720 x 404 ... which is kind of odd to me.
On playback the movie is displayed with square pixels. If the DVD plays 720 pixels wide then the corresponding height will be 405 for a 16:9 movie.

FYI Playing PAL DVD on US MBP

I am not sure if this has been brought up before, but my MBP (late 2007), and I am sure many other similar boxes play PAL DVDs perfectly. No conversion necessary.
I normally use VLC, but I checked with the Leopard DVD player and both work normally.
I thought I would just pass this along for anyone who was not sure.
Enjoy.

If your movie is encoded in the right format (such as MP4) and to specs that the Apple TV is happy with, it doesn't matter if the original movie was PAL or NTSC.
The difference between the two is the refresh rate. NTSC is approx 60Hz and PAL is 50Hz. The Apple TV will happily convert 50Hz to 60Hz and vice versa. It will output to whatever refresh rate is set in the Audio/Video settings on your Apple TV - which if you are in the US will most likely already be 60Hz. There should be no need to change these settings.
However, you may notice that motion (such as scrolling titles and slow pans) will not be as smooth due to the conversion.
But, in practice this is not a problem.
In short, the answer is YES.
Message was edited by: Easybourne

Best workflow for footage in 1440x1080 and vid rate 23.98fps going to a PAL DVD player in europe

I am new at this and still getting a grasp of the technical details. I've made several trips to Germany over the last three years and each time have shot using different settings. Right now I am editing the footage from the first year where I shot 1080i and 24p (Canon XHA1). I've already sent some DVDs with films I edited from this trip, but not sure I've achieved the best result that I can in terms of image quality. What i think i've been doing so far is to edit in the original NTSC, and then when i get ready to burn the DVD to send to my relatives in Germany, I have set the Project Info settings in iDVD to PAL. But from reading the boards I am getting the sense that there are multiple ways to do this, each with varying results. Obviously, I'd like to have my German viewers view a DVD with the best quality picture, and am wondering what is the best way to go about this. I've also read on the boards that most PAL dvd players will play NTSC, which makes me wonder if burning the DVD with iDVD set to PAL is necessary. I've already been told by one of my relatives who has viewed the same film here in america (burned as NTSC) and in Germany (one I sent burned as PAL), that the PAL versions did not have as good a picture quality. Any suggestions?
Also, if you knew that your primary audience was going to be PAL viewers, and you are shooting with an NTSC camera, what would the ideal settings be? On my canon xha1, my frame rate options are 60i, 30f, and 24f. My 'comp out' options are 480i and 080i/480i. My understanding is 1080i50 would be better for PAL, but 25fps is not an option on my camera.
Thanks,
Paul

Well it must be 24 over 29.97 then because it is working with it. I have been able to create timelines and export quicktime movies, etc. The item properties (in FCE Browser) of the clips definitely say 23.98fps-- as I would expect because I know I had the camera set to 24p. However, the frame rate of the sequences i've been editing on say 29.97. This is without me having made any conscious effort to manipulate any settings for the sequences at the outset-- I didn't even know the sequences had settings for this when i started. I just began dragging and dropping footage out of the browser and it must have automatically set the sequence to 29.97. Who knows what I had the Easy Set up set to when i brought the footage over from my camera two years ago. I knew even less then. Are the settings on Easy Set up critical when bringing the footage onto your computer from your camera? What processes are the Easy set up settings governing?
Even with all of that said, you would recommend burning the DVD as an NTSC? An NTSC in a new PAL DVD player will look better than an NTSC burned as a PAL? I suppose I could send them both versions and see which one looks better.
Thanks for you help Tom.
P.S.
On the true 24p issue, I did find this:
There are many posts out there about the Canon XH A1 not having "true 24p".
I think much of that misinformation out there maybe stemmed from (correct me if I'm wrong):
Canon Frame Mode on the standard DV cams was a "simulation: of the 24 frame look.
The Canon HDV 24p actually records each single frame progressively, but using an interlaced method.

HD NTSC to PAL DVD workflow... help?

Hi all,
I poured through the forums regarding this question and could not find a suitable answer. And (of course) I am in a rush for my client.
I have shot and edited a DVCPRO HD 720x60P video, and now I need to get this thing into a PAL DVD.
I tried exporting the video as Apple Pro-Res 422 PAL, and there are problems with the aspect ratio changing, and about 60% of the cross dissolves flash black for a second.
Anyway, after reading through the forums, I realize that I am in the dark for a workflow to get this video out of FCP and into either DVDSP or iDVD (this will be a simple DVD, and iDVD is good enough), and make sure it plays on a DVD player in Scotland.
Any suggestions as to how to best get from point A to point B?
Also, is there no PAL that is close to 16:9?
Sorry for the silly questions... I am out of my comfort zone here... and on the clock.
Matt

From what I understand from my PAL land friends, their current generation DVD players can deal with NTSC disks. Why don't you check with the person who will play it back and see what equipment they have.
You did not say how you did the conversion but I would do this.
• Export a file from FCP using "current settings"
• Import it into Compressor
• Apply the advanced format conversion preset for DV/PAL anamorphic and submit the job
This will give you an 16:9 DV/PAL video.
If this has problems, you may need to do the conversion in two steps.
• Export a file from FCP using "current settings"
• Import it into Compressor
• Apply the advanced format conversion preset for DV/NTSC anamorphic and submit the job
• Import the resulting DV/NTSC anamorphic file into compressor
• Apply the advanced format conversion preset for DV/PAL anamorphic and submit the job
x

1080i60 file to PAL dvd

i have a motion based animation. 1920 x 1080 that i need to convert for use in a pal dvd. seems simple, but all i need to do is run it through the 1080i60 PAL preset in compressor (which only changes the fps to 25) and then compress that as a mpeg?
am i missing anything?
macbook pro 2.33 Mac OS X (10.4.9)

Hope you asked us to disregard because you figured it out or got help, not because you're giving up!
There are some excellent white papers (pdfs) on this site about FCP workflows.
One thing to keep in mind is that changing the easy setup will only change the default settings for new elements you create. Existing sequences will keep their original settings, which if you think about it is the way you would want it.
Also, you don't have to make a separate version of the project, you can duplicate the sequenc ein the original project - I find file management easier this way.
Good luck -
Max Average

HDV to NTCS DVD works... is it the same for a PAL DVD?

Hello
I created a DVD from HDV material using these settings with compressor:
http://www.larryjordan.biz/articles/bkhdvconvert.html
basicallythe options are: DVD Best Quality 90 min 16:9
Video Format Tab in the Inspector to manually set filed dominance to "botom first"
It worked fine.
Now i need to create a PAL DVD. what would i need to change?
just set the video format to PAL in the inspector window? and then in DVD studio pro set it to PAL again?
thanks.
Leon.
thanks.

let me see if I can help out a little here.
The problem with converting 1080i to SD in software is that FCP seems to do a not-very-good job of downsampling the image, particularly when you are going directly to DV. Details get blurry, and other compression artifacts become quite noticeable. I have also experienced trouble with the HDV fields not getting processed correctly if I go to SD mpeg directly from an HDV timeline or movie file.
Your best bet is one of the following workflows:
Export a 1080i HDV or AIC movie file and re-import to FCP. Place this clip into an anamorphic SD sequence. It doesn't matter if the sequence is DV or Uncompressed if you send the sequence directly to Compressor from FCP, because this will ignore any rendered material and use an uncompressed image buffer as it encodes the mpeg. Do not letterbox your widescreen video if you are going to DVD - widescreen DVD video should always be full-frame anamorphic.
Your other option is to attempt to use Compressor to down-res the sequence or a self-contained movie of your HDV, starting with one of the advnace format conversion presets in Compressor. However, you'll have to cutstomize the preset by turning on the frame controls, and testing the settings to make sure you are happy with the result. Turning on frame controls will increase the ratio of your encoding time anywhere from 4 to 20:1.
I have tried all of these methods, and none of them look as good as capturing the downconverted video from the deck after mastering to HDV tape.
Hope this helps -
Max Average

PAL DVD - NTSC DV

I have been trying to convert a PAL DVD to NTSC DV.
I have tried iMovie, MPEG Stremclip, MPEG2 Works 4 and JES Deinterlacer. The NTSC comes out okay but if there is a slight motion in the video, there are lines/combs ?
Is this normal for PAL to NTSC conversions or is their something I can do to filter this out ?
Thanks.

I'd first convert the PAL DVD/VOB to PAL DV via MPEG Streamclip.
Then I'd convert the PAL DV to NTSC DV via JES Deinterlacer.
DVD can be either bottom field first or top field first but DV is always bottom field first. A wrong setting in the conversion can produce very irritating flicker if the field dominance ends wrong. But the procedure above should automagically use the right settings.
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#interlacing
if there is a slight motion in the video, there are lines/combs ?
This might be normal interlacing and even preferred if the output is meant for a TV.
You might want to enable progressive output in JES Deinterlacer if the output is meant for a computer monitor or if for some strange reason you prefer progressive output on a TV.

PAL DVD WS export: why black bars at sides?

I am editing a 1920x1080 EXCAM HD sequence in Premiere Pro CS6.01 on Win7x64.
I want to export to PAL Widescreen DVD.
When I use the PAL WS presets to export from Premiere I get black bars on either side of the MPEG2 DVD footage.
Why is this?
Both 1920x1080 and PAL WS are 16:9 (aren't they?). So why am I getting the black bars? Shouldn't the PAL DVD footage fill the entire width of the frame?
Any ideas why I get these black bars? And even better, how I can get rid of them?
Cheers
Mark

Why is this?
Before the age of digital video, it was decided by technocrats that what we see in the end product (called the Clean Aperture) would be different from what was there in the original (called the Production Aperture). They left off some pixels at the side when they made the calculation for the widescreen Pixel Aspect Ratio. That process has unfortunately carried over onto digital video, and we're still using that same old analog PAR, instead of what we should be using when you calculate it for the entire frame. This results in the black bars you see.
In CS6, this is easily overcome by selecting Scale to Fill in the Export settings.

Convert Compact Camera NTSC Video to PAL DVD

Hi All,
I am trying to take video footage from my compact Canon digital stills camera, which is 640 x 420, 30fps AVI, and make it useable for a PAL DVD. I use FCP for my editing and normally DVDSP for DVD creation. In FCP, as I normally edit in PAL, the footage from my camera looked jerky, presumably as the frame rates were mismatched. I discovered that the preset NTSC 48k seemed to match it perfectly - frame size and rate, no jerkiness or disortion of the image.
The workflow from then on is pretty straightforward if I want to creat a NTSC DVD, but I was wondering if I can do anything to make it play correctly on a PAL DVD?
I have tried changing the frame rate and size/ratio in FCP to that of PAL before output - jerky result.
I have exported as a full res QT movie using the current project settings in FCP, but then can't use a NTSC file in a PAL DVDSP project
I then exported as a full res QT movie using project settings in FCP, created a new iDVD project in PAL, added my QT export, converted it in the program (why can't DVDSP do this??) and burned it. But when played back in a DVD player, the jerkiness is back.
I have discovered a way in Compressor that does an ok job of converting it, but it takes ages to render out even a short piece.
Is there an easier, less time consuming way that gives good results?

Hi,
First of all, almost all PAL DVD players have no problem playing NTSC DVD's so staying in NTSC would probably be ok.
Are you converting your media before importing into FCP, I don't know the format of the media your camera shoots but It won't be a format that works very well in FCP, you'll have problems.
If you really want to convert to PAL, Compressor will do that and someone familiar with the workflow may chip in. Good Luck.
DM

Workflow for dual NTSC and PAL DVD project

Hello,
I am really in need of professional advice here, and any tips would be GREATLY appreciated. I am not an expert in Final Cut Studio, but I am OK to get things done on the project I am working on. Some things, despite cracking through multiple manuals, I can't properly figure out... THANKS AGAIN for any help!
I am working on a DVD project which I want to release in two versions: NTSC version in US, and PAL version for Poland — same content. Content was created using DV-NTSC Quicktime files, made on import from an American mini-DV SONY camcorder into Final Cut Pro. All the titles created in Photoshop were created in 720 x 540 and converted to 720 x 480 for the sequences.
I made one NTSC DVD using Studio Pro, and it seems to work okay, with some minor tweaks. But I really need to know what is the best way to make a PAL DVD with minimal quality loss. I need to set up this project correctly, because I have a **** of a lot of work to do, and I don't want to screw it up by incorrect setup.
So many questions... Should I use separate Final Cut sequence files, with different settings, for each disc? Should I finish my work in sequences with NTSC settings in Final Cut, and then use Compressor to export to PAL from within Final Cut? Really, what is the best workflow for something like this? I would dearly appreciate any advice.
Many thanks!
Rad

First off - you can do this. Finish your work in NTSC. Then go buy the Graeme Natress plug for FCP. http://www.nattress.com/standardsConversion.htm
Download and install the app. THen follow the instructions on his site. It's a short turorial movie and you're done.
Heads up - you'll need to first export NTSC Quicktime files of each of your movies.
Hope this helps.
Brian

Pal dvd settings

Similar Messages

Maybe you are looking for