Parallax code not working in CC 2014.1

Hi!,
I have being using this code for parallax in CC 2014, as an action on the stage on a scroll event.
// scrolling controls animation
var animationHeight = 25000
var stageHeight = sym.$("Stage").height()
var scrollPos = sym.$("Stage").scrollTop();
var duration = sym.getDuration();
var percent = scrollPos / (animationHeight - stageHeight);
var time = duration * percent;
// Update timeline
sym.stop(time);
After upgrading to CC 2014.1, the code no longer works, any ideas about what needs to be changed? Tried to downgrade to 2014, but the version is no longer available.
Help?
Thanks,

ok, so I figured out the answer. last line should be replaced with
sym.stopAll(time);
And overflow value should be set to scroll or auto.

Similar Messages

Perspective Warp not working in Photoshop 2014? Anyone else having this problem?

Perspective Warp not working in Photoshop 2014? Anyone else having this problem?

I cannot use Perspective Warp. | Mylenium's Error Code Database
Mylenium

Why do my panels not work in CC 2014

I made my own panels in CC but they don't work in CC 2014. I miss them.

It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

PS4 Game Voucher Code not working

my PS4 Game Voucher Code not working and says: "The code you entered may not be correct or may no longer be valid" "Please check your entry (e-820000134)

Voucher codes are region-specific. For instance a US voucher won't work with a UK account. First thing to check is whether the voucher's region matches your account's region.

.oam file of html5 video trigger code not working in Muse

I simply want to have a video play on page load. I have done the code for a trigger on one <div> to automatically play a video in Edge. The video plays perfectly in browser preview, even with transparency intact! Just the way I want it. The problem is when I insert .oam file in Muse it doesn't work. Other animations of simple objects and key frames work fine in Muse. But, I can make much more beautiful animations for certain elements in After Effects, with transparency and integrate them with elements in Muse. The video, its transparency and other objects work great from Edge to browser preview but not when .oam file is exported and placed into Muse. I know, I wouldn't build an entire site like this, I just want one or two animations to play automatically, with out controls (which I've been able to do), when the page is loaded.
I publish with business catalyst to a my own domain, with Creative Cloud.
Attached is a video where I'm at.
What is the code or method to get to work?

HI,
Ok. I know that mov is not supported in Firefox nor Chrome, now.
When I put the trigger in Edge to play the .mov file, it works when I preview from Edge to Safari, and not in any of the other browsers. This leads me to think that Safari supports .mov files, with and without transparency.
However, when I try to put the .oam file generated by Edge into Muse and run the page in Safari the video doesn't work. Is this a .mov support with Muse? Does the video need to be uploaded to the Adobe Business Catalyst server? Where I publish my site?
.mov and transparency aside, I can't get any video to play in any browser from the .oam file placed in Muse. Nothing plays in preview nor when I publish in Muse. I get the previews to work from Edge for the corresponding video for each browser. And yes, when controls in put in it says wether the video is supported or not. But I would want no controls and the video to play automatically on page load. Ideally I would like transparency. But I realize that's a browser support thing. I don't see why all browsers don't support all video types and WITH transparency. C'mon now it's almost 2014! Am I right or am I right? Ok, sorry.
I followed everything in this Tom Green video. Pretty sure all my code is correct.
http://layersmagazine.com/embedding-video-in-adobe-edge-animate.html
Picture shows code for working .ogv in Edge preview but not from .oam file in Muse in preview nor publish.
Not sure why it won't even show in preview from Muse. But thinking when I publish, the video must have to be local on the publish server right?
Am I missing something? Do I need to insert HTML into Muse, not the .oam?

Open my closed hotmail account , code not worked

Hi
I closed my account hotmal by mistake , and I tray to open it
saliraouf@hotmail.com will be closed on 8/17/2014
You're trying to sign in to an account that's going to be closed. If you continue, we'll reopen the account. If you cancel, your account stays marked for closure.
What do you want to do?
I tray to use all the code sending by Windows but it appeerl le code does not work , tray another time , I have a week trying to open it but it still closed
i posed the problem to technical support but i have not get any answors
can you help me

Hi,
Seems this question is that you closed your Microsoft Account by mistake but now you can't cancel the action.
Please note we provide support for Excel in the current forum, this question is beyond the scope. I think you can get this issue resolved with the help from this link below:
http://windows.microsoft.com/en-us/windows-live/id-support
I hope this will help.
Regards,
Melon Chen
TechNet Community Support

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

End Routine Code not Working after Support Pack Upgrade

Hi BI Community,
We have recently upgraded to SPS17 (BW SP19) for our production system and the code deriving the values of several attributes in the end routine of the transformation for one InfoObject (as info provider) does not work anymore. We have been trying to identify the root cause but the fact is that we did not change anything to the InfoObject and its transformation and this used to work fine. The strange thing is that when we debugged the code we could see the value of the aforementioned attributes was derived correctly but the value is just not updated to the InfoObject where we still see the old values for these attributes.
We have a similar InfoObject with the same end routine code in the transformation and it is working fine. We are out of idea what could have caused this during the SP upgrade.
Thanks in advance for your feedback.
Regards,
Peter

Cannot say what might have caused it but one check you can perform.
Open your transformation in change mode and you can see a button next to create end routine button, titled ' Update Behavior of End Routine Change', click on that and say all fields.
Hope it helps...
Regards,
Ashish

Jsp code not working

hello
we have some class files that are in a zip file that the nw admin has included in the CLASSPATH.
The code works on Windows w/Tomcat but not the remote Sun Web Server, we cannot get the connection to database due to the code not reading the class files.
Has anyone come up against anything of this nature. Any thoughts are appreciated.

yeah we're not getting the str replace error any more - heres index.jsp
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ include file="admin/include/db.jsp" %>
<html>
<head>
<title>Toshiba Industrial Systems</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="common/css/master.css" rel="stylesheet" type="text/css">
<script type="text/javascript" language="Javascript" src="common/js/master.js"></script>
<script>
var strBCLink1 = "placeholder.html";
var strBCLink2 = "index_oc.jsp";
var strBCLink3 = "prod_100.jsp";
var strBCText1 = "Industrial Systems";
var strBCText2 = "Uninterruptible Power Systems";
var strBCText3 = "1000 Series";
</script>
<script language="JavaScript" type="text/JavaScript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a)&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
//-->
</script>
<style type="text/css">
</style>
</head>
<body>
<table height="100%" width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td height="87">
<%@ include file="_header.jsp" %>
</td>
</tr>
<tr>
<td align="left" class="backGlobalNav" valign="top" height="21" >
<%@ include file="_nav_global.jsp" %>
</td>
</tr>
<tr>
<td align="left" valign="top" height="23">
<%@ include file="_breadcrumb.jsp" %>
</td>
</tr>
<tr>
<td align="left" valign="top">
<table width="100%" height="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="160">
<%@ include file="_nav_side_ups.jsp" %>
</td>
<td width="8" align="center" valign="middle"><img src="common/images/spacer.gif" alt="" width="1" height="1"></td>
<td width="605" align="left" valign="top">
          <TABLE cellSpacing=0 cellPadding=0 width="100%"
border=0>
<TBODY>
               <tr><td height="5"></td></tr>
                    <%
                    if(((request.getParameter("id3")==null))){
                    %>
<TR>
<TD width=605 align="left" valign="top">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="605" height="250">
<param name="movie" value="admin/index_images/index.swf">
<param name="quality" value="high">
<embed src="admin/index_images/index.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="605" height="250"></embed></object>
                    </TD>
</TR>
                    <%}
                    else{
                    str1="";
                    Statement smt4l = conn.createStatement();
                    str1 ="select * from tbl_item where int_parent_id=" + request.getParameter("id3");
                    ResultSet rs_4l=smt4l.executeQuery(str1);
                    %>
<TR>
<TD width=605 align="left" height="250" valign="middle" bgcolor="#F0F0F0">
                         <table border="0" width="100%">
                              <%while (rs_4l.next()){ %>
                              <tr>
                                   <td>
                                        <a href="./<%=rs_4l.getString(str_link")%">?id1=<%=request.getParameter("id1")%>&id2=<%=request.getParameter("id2")%>&id3=<%=request.getParameter("id3")%>&id4=<%=rs_4l.getInt("int_item_id")%>" class="nav2ndOff">
                                        <%=rs_4l.getString("str_title")%>
                                        </a>
                                   </td>
                              </tr>
                              <%}%>
                         </table>
                    </TD>
</TR>
                    <%
                    }%>
<TR>
<TD vAlign=top align=left></TD>
</TR>
<TR>
<TD vAlign=top align=left height=5><IMG height=1
alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
</TR>
<TR>
<TD vAlign=top align=left> <TABLE cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD vAlign=top align=left> <TABLE cellSpacing=0 cellPadding=0 width=605
border=0>
<TBODY>
<TR>
<TD class=backGrayMed height=17 align="left" valign="middle"><SPAN
class=contentBoxOC> Featured Products</SPAN> </TD>
<TD class=backWhite width=1><IMG height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
<TD class=backGrayMed align="left" valign="middle"><SPAN
class=contentBoxOC> News</SPAN></TD>
</TR>
<TR>
<TD vAlign=top align=left width=399><IMG
height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
<TD class=backGrayLight vAlign=top align=left
width=1 rowSpan=2><IMG height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
<TD vAlign=top align=left width=200 height=10>

<IMG
height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
</TR>
<TR>
<TD vAlign=top align=left><table width="100%" height="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td height="237" align="left" valign="top">
<table width="405" border="0" cellspacing="0" cellpadding="0">

                                                       
<%
                                                            Statement smt_featured = conn.createStatement() ;
                                                            ResultSet rs_featured=smt_featured.executeQuery("select * from tbl_item where int_parent_id= 0 and bit_featured=1");
                                                       %>
<tr>
<%
                                                       int i=0;
                                                       while(rs_featured.next()){
                                                       i++;
                                                       Statement smt_featured1 = conn.createStatement() ;
                                                       ResultSet rs_featured1=smt_featured1.executeQuery("select * from tbl_item where int_item_id= "+rs_featured.getInt("int_item_id"));
                                                       rs_featured1.next();
                                                       %>
<td width="1"></td>
<td width="190" height="190" align="left" valign="top" style="cursor:hand">
<table width="100%" height="190" border="0" background="common/images/featured/back_box.gif" cellpadding="0" cellspacing="0">
                                                            <a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>">
<tr>
<td height="18" colspan="2" align="left" valign="bottom" class="headerMainProdFeature">
                                                                 <a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>" class="headerMainProdFeature" >
                                                                 <%
                                                                 if((rs_featured.getString("str_title").length() )>20){
                                                                      out.print(rs_featured.getString("str_title").substring(0,20));
                                                                 else{
                                                                      out.print(rs_featured.getString("str_title"));
                                                                 %>
                                                                 </td>
</tr></a>
</a>
                                                            <a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>">
<tr>
<td height="10" colspan="2" align="left" valign="bottom" ><a href="#" class="navfeat"><%=rs_featured.getString("str_subtitle")%></td></tr></a>
</a>
                                                            <a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>">
<tr>
<td height="94" colspan="2" align="center" valign="middle"><a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>"><img src="admin/product_images/<%=rs_featured.getString("str_image")%>" border="0"></td></tr></a>
</a>
                                                            <a href="<%=rs_featured1.getString("str_link")%>?<%=current_url_paramenters%>&<%=next_url_paramenter%>=<%=rs_featured.getInt("int_item_id")%>">
<tr>
<td width="100%" height="16" align="right" valign="middle"><img src="common/images/featured/arrow.gif" width="17" height="18">  </td>
</tr></a>
</table>
                                                            </td>
<td width="9"></td>
<%if((i%2)==0){%>
</tr>
<tr>
<td height="9"></td>
</tr>
<tr>
<%}
                                                            }%>
<td></td>
</tr>
<tr>
<td height="8"></td>
</tr>
<tr>
<td height="8"></td>
</tr>
</table> </td>
</tr>
</table> </TD>
<TD vAlign=top align=middle> <TABLE cellSpacing=0 cellPadding=0 width="95%"
border=0>
<TBODY>
<%
                                                  Statement smt_news = conn.createStatement() ;
                                                  ResultSet rs_news=smt_news.executeQuery("select * from tbl_news where bit_active=1 and bit_featured=1");
                                                  while(rs_news.next()){
                                                  %>
<TR>
<TD vAlign=top align=center><IMG
src="common/images/featured/82.gif" alt="" width="3" height="5"
border=0></TD>
<TD vAlign=top align=left> <A class="pr" href="./admin/news/<%=rs_news.getString("str_link")%>" target="_blank">
<%=rs_news.getString("str_title")%>
</A> </TD>
</TR>
<TR>
<TD vAlign=top align=left><IMG height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
<TD vAlign=top align=left height=6>

<IMG
height=1 alt=""
src="Hard Drives & Optical Drives_files/spacer.gif"
width=1></TD>
</TR>
<%}%>
<TR>
<TD vAlign=top
align=left></TD>
</TR>
</TBODY>
</TABLE></TD>
</TR>
</TBODY>
</TABLE>
                                   </TD>
</TR>
</TBODY>
</TABLE></TD>
</TR>
</TBODY>
</TABLE></td>
<td align="left" valign="top"> </td>
</tr><tr>
<td height="5" colspan="4"><img src="common/images/spacer.gif" width="1" height="1"></td>
</tr>
<tr>
<td height="30" align="left" valign="top" colspan="4">
<%@ include file="_footer.jsp" %>
</td>
</tr>
</table>
</td>
</tr>
</table>
</body>
and here is db.jsp
<%@ page import="com.oreilly.servlet.MultipartRequest,java.io.*;"%>
<%!
String nl2br(String str){
     str=blanknull(str);
     return str.replaceAll("\n", "<br>");
String addslashes(String str){
     str = str.replaceAll("'", "''");
     return str;
String getExtention(String str){
     int pos = str.indexOf(".");
     return str.substring(pos,str.length());
String getExtention1(String str){
     int pos = str.indexOf(".");
     return str.substring(pos+1,str.length());
String convertFileSize(long size) {
     int divisor = 1;
     String unit = "b";
     if (size >= 1024 * 1024) {
          divisor = 1024 * 1024;
          unit = "M";
     else if (size >= 1024) {
          divisor = 1024;
          unit = "K";
     if (divisor == 1) return size / divisor + " " + unit;
     String aftercomma = "" + 100 * (size % divisor) / divisor;
     if (aftercomma.length() == 1) aftercomma = "0" + aftercomma;
     return size / divisor + " " + unit;
String highlight_key(String str, String key,String color){
     //str = str.replaceAll("(?i)"+key, "<font color='"+color+"'><b>"+key+"</b></font>");
     return str;
String first_sentence(String str, String key){
     int pos = str.indexOf(".");
     if(pos==-1){
          pos=str.length();
          return str;
     String str1=str.substring(0,pos);
     int pos1 = str1.indexOf(key);
     if(pos1==-1 && pos!=str.length()){
          str=str.substring(pos+1,str.length());
          return first_sentence(str,key);
     else{
          return str1;
String blanknull(String s) {
return (s == null) ? "" : s;
String removeslashes(String str){
     str = str.replaceAll("''", "'");
     return str;
void sendmail(String to,String from, String subject, String message){
//String from="[email protected]";
//String to="[email protected]";
try{
     SmtpClient client = new SmtpClient("mail.xxxxx.xxx");
     client.from(from);
     client.to(to);
     PrintStream message = client.startMessage();
     message.println("To: " + to);
     message.println("Subject: "+subject+"!");
     message.println(message);
     message.println();
     message.println();
     client.closeServer();
catch (IOException e){
     System.out.println("ERROR SENDING EMAIL:"+e);
%>
<%
Connection conn = null;
//String dbUrl = new String("jdbc:mysql://localhost/toshiba?user=root&password=");
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
conn = DriverManager.getConnection("jdbc:oracle:thin:@10.0.112.92:1524:cweb","mhunter","chester");
Statement smt = conn.createStatement() ;
String path=getServletConfig().getServletContext().getRealPath("admin");
String imagepath=path+"/product_images";
String tagpath=path+"/tag_files";
String newspath=path+"/news";
String envpath=path+"/env_images";
String resumepath=path+"/resume_files";
String pagepath=path+"/pages_files";
String downloadpath=path+"/download_files";
%></a>

JQuery Code Not Working (Positioning Nav at a fixed point)?

Hello So lets just cut to the cace,
This code does work outside of Edge but doesn't work in edge. . . .
$(window).bind('scroll', function () {
        sym.$("arroworb").addClass('fixed');
The Object i want to keep in its place at all times even if the scroll bar is moved has the div ID of arroworb. . .
I have no Idea what i am doing wrong but yeah the code does work it just doesn't when put into Edge
My guess would be the window or blind has something to do with it not working but I have no idea how to fix this,
Any idea's?
Thanks In Advance!

Here is a small example, using animate, as Joe mentions.
In Stage > compostionReady
$(window).scroll(function(){
       var element = sym.$("arroworb");
       element.stop()
.animate({"marginTop": ($(window).scrollTop() + 30) + "px"}, "slow" );
View here http://www.heathrowe.com/edge/scroll_with_page/
Download here http://www.heathrowe.com/edge/scroll_with_page/scrollwithpage.zip
hth
Darrell

SQL Code not working in Forms Developer?

Hi all,
I'm using Oracle 10g and I have th following code running on iSQL+ but not working on Forms and I got the following erro
The SQL code:
     select returningreason
        from (
                 select returningreason,
                 dense_rank() over (partition by 1 order by count(*) desc) as drnk
                 from returned_goods
                 group by returningreason)
       where drnk = 1;And the error happens near the word over to the right and the error statement is:
Error 103 at line 18, column 19
   Encountered the symbol "(" when expecting one of the following:
         , formThanks in advance :)

Triggers are compiled in forms so need to use only the features available to forms, which doesn't include all the new stuff in the database.
select over partition
NVL2They don't work in forms and reports too.
Also if you use them in record Group
Forms/SQL Compiler was not lined up to the database(10G).
Meanwhile,for example. Pipelined TABLE and relative Select work in Reports AND Forms.

Polygonal lasso not working in PS 2014 with OS X 10.10

The polygonal lasso is not working when using Photoshop CC 2014 with the new Mac OS X 10.10 Beta. Anyone else notice this problem? It still works fine in regular Photoshop CC.

You are right about taking my chances with the beta. So far it's working pretty well. They've made a lot of cool visual improvements. A lot of other people who are not using the 10.10 beta seem to be having trouble with the polygonal lasso as well so I wonder if it might be an Adobe problem. I have sent in a report to Apple about the issue.

Wrap not working in Muse 2014

Wrap function not working at all. I have a text box, with text, and a picture picture, with picture. The picture is arranged to the front and all the items are on the same layer, but when I go to the Wrap box everything is greyed out. I've tried multiple boxes and even created a new site to test whether this is an issue with older sites in the 2014 update. Nothing works, there is no combination of boxes that allow me set a Wrap.
Any ideas?
Thanks,
Jen

Zak Williamson (Adobe) wrote:
Hi Jen, I'm frankly not sure what additional instructions to provide. Both mac_heibu and agm 123 have made valiant attempts to describe how to enable text wrap in Muse.
1) Create a text frame and populated it with text.
2) Draw a rectangle.
3) Cut the rectangle.
4) With the Text Tool click and insertion point in the text.
5) Paste
6) Select the rectangle (which is now inline in the text flow).
7) Select the Wrap settings you want via the Wrap panel.
Text wrap capabilities are limited on the Web. Wrap is only available for items pasted within the text flow that will be wrapping around the graphic. Basically the rectangle (or other objects) can be aligned to the left or right in the text frame with the text flowing around only one side of the wrapped object. And only rectangular text wrap is supported.
Thank you Zak, and thank you to mac_heibu and agm 123 for their efforts. While I understand the positive intent of their posts, it is immensely frustrating to be told the same thing over and over without anyone acknowledging the fact that I have clearly stated that I have followed those steps and I STILL get the results I pictured above.
So I will say it for the fifth time, thank for the instructions on the textbook method on how it is suppose to work. Textbook "suppose to" doesn't seem to be the issue. As with other bugs in Muse 2014 (Source San Pro preference problem), I am hoping someone has a workaround beyond the way it is "suppose to work" I need someone who has some trouble shooting suggestions. I've cleared prefs. and reinstalled Muse to no avail. I created a new site to test if it was an issue with files created by older versions of Muse, but brand new site does the same thing.
Thanks,
Jen

Hyperlinks not working in cc 2014

I'm on CC 2014 and I'm curious if text hyperlinks are still not working. I've read that they didn't in a previous version, but I'm updated and still having trouble. I've tried both internal hyperlinks and hyperlinks to outside URLs. I'm pretty familiar with the process and can get them to work with frames and images, but no luck with text.
Thanks for any help or resources.
All the best,

I also had problems with my extensions.
I followed the following steps.
1. Closed Dreamweaver
2. Updated Extension Manager CC using the Creative Cloud desktop app.
3. Renamed C\Users\Joe Dempsey\AppData\Roaming\Adobe\DreamweaverCC\en_US\Configuration to C\Users\Joe Dempsey\AppData\Roaming\Adobe\DreamweaverCC\en_US\Configuration-backup
4.Deleted and re-installed the extensions using the Extension Manager.
5. Started Dreamweaver.
There may be a more efficient method; the above worked for me.

Parallax code not working in CC 2014.1

Similar Messages

Maybe you are looking for