Parameter Binding By Name

How do I bind parameter by name instead of by position? The only relevant property I found was OracleCommand.BindByName, which doesn't seem to work as expected. Another propert OracleParameter.BindByPos is in the documentation but not seem to be in the assembly.
Thanks
Bob
Here is the code snippet for test -
          static void Main(string[] args) {
               OracleConnection conn3 = new OracleConnection
                    ("user id=daf; password=daf; Data Source=mbobn;");
               try {
                    conn3.Open();
                    OracleCommand cmd3 = new OracleCommand (
@"create or replace procedure bind_by_name (p_param_1 varchar2, p_param_2 out number) as begin p_param_2 := to_number(p_param_1); end;", conn3);
                    cmd3.ExecuteNonQuery();
                    cmd3.CommandText = "bind_by_name";
                    cmd3.CommandType = CommandType.StoredProcedure;
                    cmd3.BindByName = true;
                    OracleParameter parm;
                    parm = new OracleParameter
                         ("p_param_1", OracleDbType.Varchar2, 20);
                    parm.Direction = ParameterDirection.Input;
                    parm.Value = Convert.ToInt32(args[0]);
                    cmd3.Parameters.Add (parm);
                    parm = new OracleParameter
                         ("p_param_2", OracleDbType.Int32);
                    parm.Direction = ParameterDirection.Output;
                    cmd3.Parameters.Add (parm);
                    OracleDataAdapter da = new OracleDataAdapter(cmd3);
                    cmd3.BindByName = true;
                    DataSet ds = new DataSet();
                    da.Fill (ds, "tst");
                    conn3.Close();
                    Console.WriteLine (ds.GetXml());
                    Console.WriteLine ("p_param_1=" + cmd3.Parameters["p_param_1"].Value.ToString());
                    Console.WriteLine ("p_param_2=" + cmd3.Parameters["p_param_2"].Value.ToString());
               } catch (Exception e) { Console.WriteLine ("Failed to " + e.Message); }
               finally { if (conn3.State == ConnectionState.Open) conn3.Close(); }

Prefixing a colon(:) led to the following exception -
Unhandled Exception: Oracle.DataAccess.Client.OracleException ORA-01036: illegal
variable name/number at Oracle.DataAccess.Client.OracleException.HandleError
Helper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, IntPtr opsSqlCtx,
Object src, String procedure, String[] args)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, Oracle
Connection conn, String procedure, IntPtr opsErrCtx, IntPtr opsSqlCtx, Object sr
c, String[] args)
at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Bool
ean fillRequest, CommandBehavior behavior)
at Oracle.DataAccess.Client.OracleDataAdapter.Fill(DataSet dataSet, Int32 sta
rtRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior
behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
at ConsoleApplication1.ParamBindByName.Main(String[] args) in c:\_dev\btst\da
taprovidertest\consoleapp\parambindbyname.cs:line 39

Similar Messages

Name Parameter Binding

Is there any sample code showing how to do named parameter binding using ODBC? I have stored procedures with 100+ parameters and default values assigned to most of the parameters and I want to be able to only bind to the variables that I need to pass. I have it working with MS SQL but with oracle it in not binding to the correct parameter
Thanks

I am tring to do Named "Parameter Binding", I am using using straight ODBC from vc++ with the latest driver 9205. I have also tried the DataDirect drivers and using ADO from VB6.
The same code has worked fine with SQL Server but with oracle it always ingores the SQL_DESC_NAME setting in the SQLSetDescField statement and sets the first two parameters, not the 2nd and 3rd param.
Thanks,
Bill
-- The Stored Procedure
CREATE OR REPLACE PROCEDURE testme (param1 varchar2 :='Default1' , param2 varchar2 := 'Default2', param3 varchar2 := 'Default3') AS
BEGIN
INSERT INTO param_test(param_1, param_2, param_3, col_id) VALUES (param1, param2, param3, test_seq.nextval);
END;
C++ Source code
// Prepare the procedure invocation statement.
retcode = SQLPrepare(hstmt, (SQLCHAR*)"{call testme(?, ?)}", SQL_NTS);
if (retcode == SQL_SUCCESS || retcode == SQL_SUCCESS_WITH_INFO)
// Populate record 1 of ipd.
strcpy((char*)szQuote, "test2");
SQLBindParameter(hstmt, 1, SQL_PARAM_INPUT, SQL_C_CHAR, SQL_VARCHAR, 30, 0, szQuote, 0, &cbValue);
// Get ipd handle and set the SQL_DESC_NAMED and SQL_DESC_UNNAMED fields
// for record #1.
//retcode = SQLAllocHandle(SQL_HANDLE_DESC, hdbc, &hIpd);
retcode = SQLGetStmtAttr(hstmt, SQL_ATTR_IMP_PARAM_DESC, &hIpd1, 0, 0);
retcode = SQLSetDescField(hIpd1, 1, SQL_DESC_NAME, "param2", SQL_NTS);
retcode = SQLSetDescField(hIpd1, 1, SQL_DESC_UNNAMED, SQL_NAMED, 0);
// Populate record 1 of ipd.
strcpy((char*)szQuote2, "test3");
SQLBindParameter(hstmt, 2, SQL_PARAM_INPUT, SQL_C_CHAR, SQL_VARCHAR, 30, 0, szQuote2, 0, &cbValue);
// Get ipd handle and set the SQL_DESC_NAMED and SQL_DESC_UNNAMED fields
// for record #2.
//retcode = SQLAllocHandle(SQL_HANDLE_DESC, hdbc, &hIpd);
retcode = SQLGetStmtAttr(hstmt, SQL_ATTR_IMP_PARAM_DESC, &hIpd2, 0, 0);
retcode = SQLSetDescField(hIpd2, 2, SQL_DESC_NAME, "param3", SQL_NTS);
retcode = SQLSetDescField(hIpd2, 2, SQL_DESC_UNNAMED, SQL_NAMED, 0);
// Assuming that szQuote has been appropriately initialized,
// execute.
retcode = SQLExecute(hstmt);
if (!SQL_SUCCEEDED(retcode))
ExplainErrors(hstmt);
}

PL/SQL:- Invalid Parameter binding

While calling a pl/sql function returning table type is shows error:
Invalid parameter binding
Parameter name: ""

The problem is coming from .NET and most probably for NULL values.
SQL> set serverout on
SQL> create TYPE TEMP_TABLE AS OBJECT (
2 COLUMN1 VARCHAR2(128),
3 COLUMN2 VARCHAR2(32),
4 COLUMN3 VARCHAR2(128));
5 /
Type created.
SQL> create TYPE TEMP_TABLE_REC AS TABLE OF TEMP_TABLE;
2 /
Type created.
SQL> create function SP_TEMP RETURN TEMP_TABLE_REC AS
2
3 v_process_inputs TEMP_TABLE_REC :=TEMP_TABLE_REC();
4
5 CURSOR CUR_EQUIP IS
6 SELECT 'b' FROM dual
7 UNION
8 SELECT 'f' FROM dual;
9
10 REC_EQUIP CUR_EQUIP%ROWTYPE;
11
12 BEGIN
13
14 OPEN CUR_EQUIP;
15 LOOP
16 FETCH CUR_EQUIP INTO REC_EQUIP;
17 EXIT WHEN CUR_EQUIP%NOTFOUND;
18 v_process_inputs.EXTEND;
19
20 v_process_inputs(1):=TEMP_TABLE('a','b','c');
21
22 END LOOP;
23 CLOSE CUR_EQUIP;
24
25 RETURN v_process_inputs;
26 END SP_TEMP;
27 /
Function created.
SQL> declare
2     result temp_table_rec;
3 begin
4    -- Call the function
5    result := sp_temp;
6    FOR i in 1..RESULT.COUNT LOOP
7     dbms_output.put_line(RESULT(i).COLUMN1||'--'||RESULT(i).COLUMN2||'--'||RESULT(i).COLUMN3);
8    END LOOP;
9 end;
10 /
a--b--c
PL/SQL procedure successfully completed.Note the last null values ----.

How to pass parameter for table name in form6i.

Hi ,
I am facing the problem to pass parameter for table name in form6i.
If any solution please infirm me earliest to my mail id.
([email protected])
example:
begin
select ename into :ename
from :tab_name
where empno =7788;
end;
It gives error as bad bind variable 'tab_name'
*** where :ename and :tab_name are form fields
Thanking you,
Balasaheb

object name not taken as table --> what do u mean by
this?
Please be more clear..
Regards
PriyaI have two block. First block I am displaying all the table using user_objects table. Another block I want display, user which table selected, corresponding table all the records.

PreparedStatement parameter binding

Hello,
I am new to JDBC and java technology. I have experience with SQL, PL/SQL and I am quite shocked, that binding parameters using PreparedStatement class is based on parameter index instead of the parameter name.
It is quite common in PL/SQL to use paramter name to bind a value to it.
E.g. if I use query "select * from foo where id = :id and name = :name" I can bind parameters using dbms_sql.bind_variable(query, "id", 5) dbms_sql.bind_variable(query, "name", "london").
However, in java I jave to bind using parameter index e.g query.setInt(1, 5), query.setString(2, new String("london")). Now the problems are
- what if the sql programmer changes code "select * from foo where id = ? and name = ?" to "select * from foo where name = ? and id = ?"
- think of a quite more complicated query, e.g. query with size of few kB - there can be a parameter repeated many times (id, date range etc) so I need to bind this parameter many times, instead of simple one bind by name
- think of a dynamicaly generated query, where it is seriously complicated to follow the parameter indexes (sql block repeating, dynamicaly generated where clausules etc) and again binding by name is much more easier than indexed binding
So my question is: Do you know of any class that supports binding by name ? Is there any workaround how to solve above mentioned issues ?
And finally, what is the reason to use parameters by index instead of naming, which is I belive more obvious in database programming ?
I am looking forward to your answers.
Kindest regards,
Kamil Poturnaj
Mgr. Kamil Poturnaj, MicroStep-MIS
Ilkovicova 3, 841 04 Bratislava, Slovakia

- what if the sql programmer changes code "select *
from foo where id = ? and name = ?" to "select * from
foo where name = ? and id = ?"Tell him "please stop doing that" :-)
He could also add a third parameter, "address = ?" which would also break it (even if the "?" were spelled ":address").
The SQL statement and the code that binds / extracts values need to be modified in sync.
- think of a quite more complicated query, e.g. query
with size of few kB - there can be a parameter
repeated many times (id, date range etc) so I need to
bind this parameter many times, instead of simple one
bind by nameThough I'm no great fan of vendor-specific 70-style languages, I'd recommend writing a PL/SQL procedure if a query gets very big.
So my question is: Do you know of any class that
supports binding by name ? Is there any workaround how
to solve above mentioned issues ?I don't know of such a package; anyone...?
It should be a nice programming exercise to write one. Something like:
    BindStatement stmt = new BindStatement("select a, :id from foo where id = :id and name = :name");
    stmt.set("name", "John");
    stmt.set("id", 1234);BindStatement would need to locate each occurrence of ":X" and create an SQL string with them replaced with "?"s. It would also need to store the positions where each ":X" occurred, so that when set("id",...) is called, it could do set(1,...); set(2,...); for the underlying statement.
Occurrences of ":X" within strings need to be considered; the easy way is to replace there too.
Unless I'm missing some gotcha, shouldn't take more than a couple of hours to write.
And finally, what is the reason to use parameters by
index instead of naming, which is I belive more
obvious in database programming ?I can only speak from my experience: sql statements within Java code tend to be simple, and the "?" syntax is quite adequate there. Complex statements, if needed, are hidden in PL/SQL. Large systems use beans and automatically generated sql glue. This seems to be rarely a problem.

Parameter Binding Issue

I have an advanced function that that looks something like this:
function Audit-System
[CmdletBinding()]
param(
[Parameter(Position=0,Mandatory=$True,ValueFromPipeline=$True,ValueFromPipelinebyPropertyName=$True)]
[Alias("Name")]
[string[]]$ComputerName
Process
foreach($computer in $ComputerName)
## Do stuff for every computer
Write-Verbose $computer
The followimg work ok:
"computer1","computer2" | Audit-System
Audit-System "computer1","computer2"
Audit-System "computer1"
The following doesn't work:
Get-ADComputer -Filter * SearchBase "CN=Computers,DC=contoso,DC=com" | Audit-System -Verbose
I would have thought that because the [Microsoft.ActiveDirectory.Management.ADComputer] has a 'Name' property parameter binding would have matched it up with my $ComputerName parameter. Why doesn't this work?

What version of PowerShell are you running? I have this working running PowerShell V4 and also having installed KB2928680 which
fixed a known issue with PowerShell V4 and the use of -Properties * with Get-ADUser and Get-ADComputer.
Interesting. I still need to pipe through select on a fully patched Win8.1 and Win7 (with V4 installed).
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)
Disregard this. After more testing (this time using the function), I run into the same issue. Appears that this particular issue is still occurring. I know there is a connect issue submitted for this, but wasn't able to locate it (at the time of this post).
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Named parameter binding

ODP.Net document said :
The position of an OracleParameter added into the
OracleParameterCollection is the binding position in the SQL statement.Position is 0-based and is used only for positional binding.
If named binding is
used, the position of an OracleParameter in the
OracleParameterCollection is ignored.
Then,how can I use named parameter binding ?

Look up the BindByName property of the Oracle Command. It defaults to false (bind params by position). Set it to true for bind by name.

Help with Invalid Parameter Binding issue

let me prefix this with the fact that I'm about as ignorant as can be when it comes to oracle so speak slowly and hopefully I'll catch the low hanging fruit.
I've inherited a project that someone else wrote and I'm trying to make the code base work, but I am getting 2 error messages and don't really know where to start to fix it.
My project is using ActiveReports (yea I hate it too) to call a function into a 10g database. It is returning an error saying Invalid Identifier. When I try to run the function in visual studio I get an invalid parameter binding error message and it says parameter name "" (empty quotes, so who knows).
here's what I have:
the type definition:
TYPE type_A AS OBJECT (date_a VARCHAR2(25), start_date VARCHAR2(25), end_date VARCHAR2(25), items_total INT, items_with_x INT, items_without_x INT, items_with_x_percent DECIMAL(7,6), items_without_x_percent DECIMAL(7,6))
the type table:
TYPE type_A_table AS TABLE OF type_A
the function that is erroring:
<em>FUNCTION func_A (start_date_str IN VARCHAR2, end_date_str IN VARCHAR2) RETURN type_A_table PIPELINED
IS
PRAGMA AUTONOMOUS_TRANSACTION;
    start_date_filter TIMESTAMP := TO_DATE(start_date_str,'MM/dd/yyyy HH:MI:ss AM');
    end_date_filter TIMESTAMP := TO_DATE(end_date_str,'MM/dd/yyyy HH:MI:ss AM');
    items_total INT;
    items_with_x INT;
    items_without_x INT;
    items_with_x_percent DECIMAL(7,6);
    items_without_x_percent DECIMAL(7,6);
    temp type_A;
BEGIN
    SELECT COUNT(*) INTO items_total FROM atable WHERE (create_date BETWEEN start_date_filter AND end_date_filter);
    SELECT COUNT(*) INTO items_with_x FROM atable WHERE conditionx=1 AND (create_date BETWEEN start_date_filter AND end_date_filter);
    SELECT COUNT(*) INTO items_without_x FROM atable WHERE conditionx=0 AND (create_date BETWEEN start_date_filter AND end_date_filter);
    items_with_x_percent := 0.00;
    items_without_x_percent := 0.00;
    IF items_total > 0 THEN
        items_with_x_percent := (items_with_x*1.00)/(items_total*1.00);
        items_without_x_percent := (items_without_x*1.00)/(items_total*1.00);
    END IF;
    temp := type_A(
        TO_CHAR(CURRENT_DATE,'MM/dd/yyyy HH:MI:ss AM'),
        start_date_str,
        end_date_str,
        items_total,
        items_with_x,
        items_without_x,
        items_with_x_percent,
        items_without_x_percent
    PIPE ROW(temp);
    RETURN;
END;</em>
I've changed some of the details here from the original so there may be some syntax errors but hopefully you get the gist of the situation.
any help would be appreciated.
Thanks

activereports is a report generator for .net
as for why it's written the way it is, I have no idea. Like I said, I didn't write it, I'm only trying to get it to work. There is far too much of it (and I'm far under-skilled) to go back and re-write everything the way it should be.
this function is pretty simple, it takes a start & end date as a string as parameters to the function. it converts those to timestamps and query's an existing table with data for the number of times condition X is true or false with in that date range. This is what the report being generated reports on.
This one was short and simple which is why I posted it. Others are far more complex and do loop, but for the sake of simplicity I posted this one. I get the same error with all the rest and I figure if I can get one working, the rest probably suffer from the same issue so fixing the rest should be fairly straight forward.
as for priv's the user is granted all priv's (that are available when you create a new user in 10g XE's web admin interface), and it won't let me grant/remove priv's from the visual studio addin for myself.

How to pass parameter [bind variable or substitution variable] to a view?

How can I pass a parameter [bind variable or substitution variable] to a view in Oracle?
Some will tell me that this is not necessary, that I can only pass the parameter when I query the view, but I found some case where this cause performance issue. In long view where I use subquery factoring [WITH], it's necessary to pass the parameter many time through different subqueries and not only to the resulting view.
In other database (SQL Server, Access), we can pass parameters through query. I can't find how to do that in Oracle. Can some one tell me what is the approach suggest by Oracle on that subject?
Thank you in advance,
MB
What I can do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
What I want to do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")(prmEMP_ID)
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES WHERE EMPLOYEE_ID IN (:prmEMP_ID);

Blais wrote:
How can I pass a parameter [bind variable or substitution variable] to a view in Oracle?
Some will tell me that this is not necessary, that I can only pass the parameter when I query the view, but I found some case where this cause performance issue. In long view where I use subquery factoring [WITH], it's necessary to pass the parameter many time through different subqueries and not only to the resulting view.Yes, there can be performance issues. Views are a form of dynamic SQL and it is hard to predict how they will perform later.
You can't pass parameters to a view. They are not functions. The mechanism to put the values in is what you mentioned, passing the parameter when you query the view.
In other database (SQL Server, Access), we can pass parameters through query. I can't find how to do that in Oracle. Can some one tell me what is the approach suggest by Oracle on that subject? This functionality is not supported.
What I can do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
What I want to do:
CREATE VIEW "HR"."EMP_NAME" ("FIRST_NAME", "LAST_NAME")(prmEMP_ID)
AS
SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES WHERE EMPLOYEE_ID IN (:prmEMP_ID);Include the bind value when you use the view in a SELECT. The value will be applied to the view at run-time, somthing like
CREATE VIEW "HR"."EMP_NAME_VW" ("FIRST_NAME", "LAST_NAME","EMPLOYEE_ID")(prmEMP_ID)
AS SELECT FIRST_NAME, LAST_NAME FROM EMPLOYEES;
select *
from emp_name_vw
WHERE EMPLOYEE_ID IN (:prmEMP_ID);To use EMPLOYEE_ID I added it to your list of columns in the view so it can be referenced in the WHERE clause. If you don't want to see that value don't select it from the view.

Same Oracle Bind Variable Name in 2 VOs not permitted?

Hi,
JDeveloper Studio Edition Version 10.1.3.3.0.4157
I have 2 different Entity based VOs, those VO's use similar Entities but their WHERE is clause is different, one VO doesn't extend the other one.
I have used Oracle (first time use for me) named bind type variables with identical names in both where clause.
When I try to define a bind variable ex. TariffIdParam in the second VO the wizard shows me an error:
Variable name is a reserved word or a variable or attribute of the given name already exists ...
Does that mean that an Oracle Bind Variable Name must me unique in the whole application?
Partial where clause:
VO1
DeliveryDetailGroup.DELIVERY_TARIFF_ID = :TariffIdParam
VO2
DeliveryDetailGroup.DELIVERY_TARIFF_ID = :TariffIdParam
Thanks
Fred

I created the second VO by using "File save as".
To resolve the problem in the new xml file I replaced the references to the other VO.
Regards
Fred

[Oracle JDBC Driver]Invalid parameter binding(s).

Hi there
I am using the OracleCachedRowSet, and it works fine until I tries to update a resultset with a null value. When I call rs.acceptChanges(connection); it results in the following exception.
Please help if anyone has found a workaround to this problem.
java.sql.SQLException: [BEA][Oracle JDBC Driver]Invalid parameter binding(s).
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.base.BaseParameters.getParameter(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setObjectInternal(Unknown Source)
at weblogic.jdbc.base.BasePreparedStatement.setObject(Unknown Source)
at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:268)
at oracle.jdbc.rowset.OracleCachedRowSetWriter.updateRow(OracleCachedRowSetWriter.java:429)
at oracle.jdbc.rowset.OracleCachedRowSetWriter.writeData(OracleCachedRowSetWriter.java:534)
at oracle.jdbc.rowset.OracleCachedRowSet.acceptChanges(OracleCachedRowSet.java:2926)
at eurostat.Items.updateRS(Items.java:192)
at eurostat.DBConnectionBean.updateRS(DBConnectionBean.java:94)
at jsp_servlet.__mainpage._jspService(MainPage.jsp:248)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

Hi Avi
Thanks for the suggestion, but I don't thint that is the problem. In other forums I have found people describing the same problem(both with Oracle and Sun's implementation of CachedRowSet). See this link for an example http://bugs.mysql.com/bug.php?id=9831. So I figured that those other people needed to have a solution to the problem, but I can't find it.
/Thomas

Report failed to parse SQL query:ORA-01745: invalid host/bind variable name

Hi,
We are currently upgrading from v2.2.0.00.32 to v4.0.0.00.46.
I have copied the applications onto our test server along with the various database objects and data etc.
When I am running a report in v4, it is failing with the following error: "failed to parse SQL query: ORA-01745: invalid host/bind variable name".
When I copy the SQL that builds the report into TOAD (on out test server) it runs OK so really cant see why it would fail in APEX. It works fine when I run the query in our APEX v2 and in TOAD in our live server.
The query is as follows:
SELECT
aea.ALTERATION_ID
,aea.ALTERATION_ID "ALTERATION_ID_DISPLAY"
,aea.assembly_name "Revised BOM"
,assembly.description "Revised BOM Description"
,assembly.INVENTORY_ITEM_STATUS_CODE "Revised BOM Status"
,aea.BEFORE_CHANGE_QTY
,flv.MEANING "Alteration Type"
,aea.component_name "Part No"
,component.description "Part No Description"
,component.INVENTORY_ITEM_STATUS_CODE "Part No Status"
,aea.AFTER_CHANGE_QTY
,TO_CHAR(aea.last_update_date,'DD-MM-YYYY HH24:MI:SS')"Last Update Date"
,aea.LAST_UPDATE_BY
,aea.COMMENTS
,aea.ORACLE_CHANGE_NOTICE
,AEA.SELECTION_CRITERIA
FROM XXMEL_APEX_ECO_ALTERATIONS aea
, fnd_lookup_values flv
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) component
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) assembly
WHERE 1=1
AND aea.COMPONENT_NAME = component.segment1 (+)
AND aea.assembly_NAME = assembly.segment1 (+)
AND flv.lookup_code = aea.acd_type
AND aea.eco = :P13_ECO
AND flv.lookup_type = 'ECG_ACTION'
AND modify_flag = 'Y'
ANy help would be great,
Thanks
Chris
Edited by: Cashy on 22-Nov-2010 04:13
Edited by: Cashy on 22-Nov-2010 04:14

For some reason, the updatable fields (this is a updateable report) where not connecting to the database properly. Whn I changed them to a report columns and removed the database field reference, the report rendered

SAP Cloud For Customer : Add Extension Fields under the Parameter Binding For Mashups

Hi Experts,
I have requirements for the mashups, I have created the extension field in cloud for customer "Registered Product" TI screen i want to add that newly created extension fields under the Mashup Parameter Binding List.
1) Is it possible ? If yes then How it is?
2) Any Standard process or we go for the SDK to enhance the standard screen port binding?
For more information refer the below screen.
Awaiting for your reply or suggestion....
Many Thanks,
Mithun

I have done the below changes on the custom BO.
Step 1 . In the Event Handler i have change as per the previous reply.
Step 2. Assign that Event to Import OnFire.
I am getting this error when open the Account Screen and go to that Embed Tab.
"Object [object Object] has no method 'getRawValue'".
Kindly check the above steps are correct or any step missing.
Many Thanks,
Mithun

Creating on the fly dynamic named bind variable names.

I have an application process which gets called by a Dynamic action and Javascript.
Everything is working great however I'm using it to drive dynamic charts.
I could use IF statements at the end of the application process to decide what BIND vairable to fill with the information the process has collected however I'd prefer just to create the BIND variable from the
name of the submitted information.
So I have an application level variable called WHICHCHART. this gets populated with text upon calling the application process...so let's say 'chart1' is what it gets filled with.
What I"d like to have at the end of the application process is just a bind variable waiting called :chart_1.
So no matter what the value of WHICHCHART it will create an on the fly a bind variable with the same name.

Ok. I guess this question was more how do you do this..then OH NO there are not other ways to do this.
So I have a page with a chart region. this chart will have 3 Y Axes which prohibits the use of the default XML.
So..
I have the following Javscript:
function getdata(whichchart) {
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=VM_XML_GENERATION',0);
        get.add('WHICHCHART',whichchart);
        gReturn = get.get('XML');
get = null;
Which is called when the page loads by a dynamic action:
getdata('production');
When the javascript is called as you can see it fires off:
declare
   chart_series_data VARCHAR(32767);
   type array_cols is varray(7) of varchar2(100);
   array array_cols := array_cols('VM_HOSTS_NUM','VM_NUMBER','VM_PHYS_MEM','VM_VIRT_MEM','VM_CPU_COUNT', 'VM_TOTAL_DISK','VM_PROVISIONED_DISK');
BEGIN
--IF :WHICHCHART IS NULL THEN
--RAISE_APPLICATION_ERROR(-20001,'Chart variable not set');
--END IF;
chart_series_data := null;
chart_series_data := '      <data>'||chr(10);
chart_series_data := chart_series_data|| '        <series name="Hosts Number" type="Line" color="0x1D8BD1" >'||chr(10);
for c1 in (SELECT VM_REPORT_DATE LABEL,VM_HOSTS_NUM from TABLE where VM_REPORT_DATE between add_months(SYSDATE,-24) and SYSDATE and lower(VM_DCNAME)=lower(:WHICHCHART) )
loop
chart_series_data := chart_series_data || '<point name="'||c1.LABEL||'" ';
chart_series_data := chart_series_data || 'y="'||c1.VM_HOSTS_NUM||'"></point> '||chr(10);
end loop;
chart_series_data := chart_series_data|| '      </series>'||chr(10)||'</data>';
:PROD_DATA := chart_series_data;
END;
The : production variable at the end of this I want to change the name of based on the value I'm sending of WHICHCHART from the javascript. I hope this is clearer now.
AGAIN this is not really a need. It is a want to be able to create dynamic bind variable names going forward.
Thanks

OWB embeded process flow - parameter binding problem

I've installed and Oracle 10g Database, after the database installation I added the Oracle Workflow server software. To complete the installation I ran the wfca.
Later I get to define a process flow in OWB (cheesy) and the process flow seems to be working well (I've done all the registrations necesary also ), but when I am trying to do the parameter binding is not working. I do get the window prompt for the parameter and I enter the date parameter ( I tried different formats like 'YYYY/MM/DD' 'dd-mon-yyyy'), but after I check the runtime in the web browser the parameter is not pass to next process. I tried many things for the last week but I cannot get it to pass the parameter from one process to another.
Any ideas,
HELP !!!!!

did u manage to resolve this issue? we are facing the same problem.

Parameter Binding By Name

Similar Messages

Maybe you are looking for