Parameter filter not working in child report - SSRS

I have two reports, one summary report which will serve as a parent report and another is a detail report which is the child report. You can navigate to the child report, once you click a field which has a drill through action from the summary report.
I don't have a problem passing the parameter values from the parent to the child report. My problem is, when I am trying to filter the child report using visible parameters which has default and available values from datasets, the child report does not show
and filter the information. It only shows the information based on the parameter value it received from the parent report.
Is there any workaround for this? Thanks in advance for your answers.
manikantan

Hi manikantan,
Based on my understanding, you create a drill through action in a main report, and you also specify a parameter to run the drill through report in Action properties. After drilling through to the target report, you want to select different values from the
drop-down list of the parameter to filter data, though the parameter has been passed from the main report, right?
In Reporting Services, if we have specified parameters for the drill through report in a main repot, after drill through to the target report, the report is already filtered. At that moment, we can’t select the parameter values from drop-down list to filter
drill through report. In a word, if we pass parameters from main report to drill through report, we are not able to filter report by selecting parameter values in a drill through report.
In your scenario, if you want to filter drill through report after drill through action occurs, please don’t specify parameters for the drill through report in Action properties. Then when you drill through to the target report, you can select parameter
values to filter data.
Reference:
Add a Drillthrough Action on a Report (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

Filter not working in ALV Report....

Hi All,
I have developed an ALV Report using REUSE_ALV_GRID_DISPLAY.
Everything is working perfectly except Filtering...
When i enter data for filtering, the ALV list will become empty. Then if i choose to delete the entry made in filter window, the filter input shows only first 4 digits of the entered value.......If i delete that value, again the data will be displayed in the ALV Screen.....
All other standard Functions like sort, export to excel sheet are working fine...
What might be the reason for this bug..?????
Please Help me...
Regards
Pavan

Thanks Prasanth,
This is the code...
It has been observed that few columns can be filtered...Like date, Quantity and few more...
But there is a column for Production Order number, which can not be filtered...
What might be the reason..?????
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program     = v_repid
        i_callback_top_of_page = 'TOP_OF_PAGE'
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
        it_sort                = t_sort[]
        i_default              = c_x
        is_variant             = v_variant
        i_save                 = c_a
        it_events              = t_events
        is_print               = wa_prntparams
      TABLES
        t_outtab               = i_aufk
      EXCEPTIONS
        program_error          = 1
        OTHERS                 = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

CR2008 . Net App - Parameters and Parameter Panel Not working

Post Author: cehowski
CA Forum: Crystal Reports
I have a CR2008 report with one parameter, which works fine when running it in CR2008. I have an app developed in VS2005 (which should have been updated when I installed Crystal and re-built the app). The new "Sort Labels" work fine, so the Viewer should be OK (the right version). When I open the report in the app, the parameter does not modify the report in anyway, whether a new value is added when it first opens, or I try to change the value using the Parameter panel after it is opened. I've tried Saving with and without data, discarding saved data on refresh, and one or two other properties that seemed like they might have an effect. None of them did. Everything works fine within CR2008 - it is only in VS2005, using the Version 12 viewer, that the parameter does not work (all records are returned by the way).
Any ideas will be appreciated.
John

Carolyn,
Firewall is off. No antivirus. Switching Little snitch on an off makes no difference.
Just tried ot connect to the App Store again, and it says no connection, connect anyway.....I click connect, and the entire window flashes balck and white and I can see data traffic to and from the app via little snitch.....the black screen is it trying to load the page but not getting through.
Strange.
Dominic

Share calculation Not working in the report

Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....

Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
                         Revenue % Share
- All Members     600         100%
     A                  100           17%
     B                  200           33%
     C                  300           50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Oracle date parameter query not working?

http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999

still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results..

Lens Correction filter not working?

I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

Jeff,
   Thanks for the quick answer, but I still think the menu is misleading.
   If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
   The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
   Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working?

N5K : ethanalyzer capture-filter not working

N5K, NX-OS 7.0.5
ethanalyzer capture-filter not working whatever the filters used;
I understand the capture-filter values are different from display-filter;
for example :
ethanalyzer local interface inbound-hi capture-filter 'ip proto 89' limit-captured-frames 0
I tried "proto 89", "proto 0x59", and te same with ' ' instead of " ";
none is rejected but no frame is captured
If I use "ospf" as the capture-filter, I get the following normal since "ospf" is a display-filter :
tshark: Invalid capture filter: "ospf"!
That string looks like a valid display filter; however, it isn't a valid
capture filter (parse error).
Note that display filters and capture filters don't have the same syntax,
so you can't use most display filter expressions as capture filters.
See the User's Guide for a description of the capture filter syntax.
no problem with the following display-filter :
ethanalyzer local interface inbound-hi display-filter "ospf" limit-captured-frames 0
Any idea ?
thanks

i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered?

Trying to get a refund on an app that do not work, but the report a problem button is grey out

Hi
I'm trying to get a refund on an app that do not work, but the report a problem button is gray out & Apple wants £20.00 for support
where do I go from here
Thanks

To report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store

Security option is not working for PDF Report

security option is not working for PDF Report , e.g password , bug??

what version of SQL Developer are you using?

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Crystal Reports dynamic parameter does not work in InfoView

Hello,
We have developed Crystal Reports in CR2008 on top of SAP infoset and we have one of our selection parameter as dynamic parameter. It works fine in the CR Dev tool but when i upload the report in the InfoView, report does not show any value in the "Available Values"
Any input will be much appreciated.
Thanks.

I did found the solution for this, i had to go into Business View Manger (BO Client Tools) and Schedule the LOV (List of Values). This is odd setting! but it works....

Parameter filter not working in child report - SSRS

Similar Messages

Maybe you are looking for