Parameter List displaying all the values on Parameter form

Dear All...If I uncheck the "Restrict List to predetermined values" option, then report parameter form displays all the values on web parameter form instead of displaying those values in the List Item. Is it the Default behaviour of Oracle Reports 10g or Can I control it anyway because if I've 1000 entries in a list, then displaying all those values openly on the form is an ugly thing and it increases the size of parameter form very much.

Hello,
A solution is provided in the Note :
Note.465886.1 How to Implement an Alternate Solution to Unrestricted List Of Values (LOV) in Parameter Form on the Web:
regards

Similar Messages

  • OADefaultListBean to display all the values

    Hello,
    Using OADefaultListBean, i was able to display all the selected values using the below logic but how to get list of all the values in the OADefaultListBean instead of just the selected ones?
    OADefaultListBean list =
    (OADefaultListBean)webBean.findChildRecursive("positionsList");
    String name = list.getName();
    String[] selectedValues = pageContext.getParameterValues(name);
    In the above code, pageContext.getParameterValue(name) gives the list of all the selected values but how to get the list of all the values?
    Thanks
    KK

    Basically my whole point in doing this is to give an option of ALL in the OADefaultListBean so that just by selecting the ALL in the list, it should technically select all the values.
    Thanks a lot in advance for your help

  • When the combobox is rendered all the values displayed look like [object Object].

    I wasn't sure where to post this so please forgive me.
    I am trying to populate a combobox with a series of values
    returned from a Coldfusion method that retrives a resault froma
    database. Basically all the data from a table of staff.
    <cffunction name="getUsers" access="remote"
    returntype="array">
    <cfquery name="q" datasource="#datasource#">
    SELECT *
    FROM STAFF_CHARTS_STAFF_TEMP
    </cfquery>
    <cfset aRecordset= querytoarray(q)>
    <cfset flash.result=aRecordset>
    <cfreturn flash.result>
    </cffunction>
    <cffunction name="querytoarray" returntype="array"
    output="No">
    <cfargument name="q" required="Yes" type="query">
    <cfset var aTmp = arraynew(1)>
    <cfif q.recordcount>
    <cfloop query="q">
    <cfset stTmp = structNew()>
    <cfloop list="#lcase(q.columnlist)#" index="col">
    <cfset stTmp[col] = q[col][currentRow]>
    </cfloop>
    <cfset arrayAppend(aTmp,stTmp)>
    </cfloop>
    <cfelse>
    <cfset stTmp = structNew()>
    <cfloop list="#lcase(q.columnlist)#" index="col">
    <cfset stTmp[col] = "">
    </cfloop>
    <cfset arrayAppend(aTmp,stTmp)>
    </cfif>
    <cfreturn aTmp>
    </cffunction>
    The result from a call of CF method getUsers is set as the
    data provider to ComboBox with id = "cb"
    <mx:RemoteObject
    id="myService"
    destination="ColdFusion"
    source="staff_ratings.staff_Ratings-debug.staff"
    showBusyCursor="true">
    <mx:method name="getUsers" result="handleResult(event)"
    fault="Alert.show(event.fault.message)"/>
    </mx:RemoteObject>
    <mx:Script>
    <![CDATA[
    import mx.rpc.events.ResultEvent;
    import mx.controls.Alert;
    [Bindable]
    public var sResult:Array;
    public function handleResult(event:ResultEvent):void{
    sResult=event.result as Array;
    cb.dataProvider=sResult;
    ]]>
    </mx:Script>
    However when the combobox is rendered all the values
    displayed look like [object Object].
    I think the problem is that the result is a array of arrays
    so I need to find away to ectract a particular colun of data into
    the combobox
    How do I fix this?

    This is what I did for a single field.
    If you were wanting the to have muliple fields in the
    dropdown, I would concatenate them in the query.
    something like
    select fname + ' ' + lname + ' ' + anotherfield as tech from
    dbo.table
    <cffunction name="getTech" output="no" access="remote"
    returntype="query">
    <cfset var qTech="">
    <cfquery name="qTech" datasource="datasource">
    select tech
    from dbo.table
    group by tech
    order by tech
    </cfquery>
    <cfreturn qTech>
    </cffunction>
    <mx:RemoteObject
    id="dataManager"
    showBusyCursor="true"
    destination="ColdFusion"
    source="cust.components.cfgenerated.Records">
    <mx:method name="getMasterQuery"
    result="getMasterQuery_result(event)" fault="server_fault(event)"
    />
    <mx:method name="deleteItem"
    result="deleteItem_result(event)" fault="server_fault(event)" />
    </mx:RemoteObject>
    <mx:ComboBox id="TECH"
    dataProvider="{dataManager.getTech.lastResult}" labelField="tech"
    />

  • How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

    Hello every one,
    In My requirement i am having  some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field.  I want to display all the region
    markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
    Thanks in advance,
    Venu.

    Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
    http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
    http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
    Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
    also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
    GeoData API with the JavaScript Bing Maps control:
    http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
    http://rbrundritt.wordpress.com

  • How can i display a list of all the names stored in the Mail app?

    When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
    I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

    On the menubar, Mail > Window > Previous Recipients
    Regards,
    Captfred

  • Get All the values of a List Row in one call?

    I am using workflow 2013 from SharePoint Designer for SharePoint online
    I need to get all the values of a row in a list. Is there a way to do this in one call from SharePoint farm to the Workflow Manager?
    Thanks
    Farida

    Hi,
    According to your post, my understanding is that you wanted to get the values of a item in a list using the SharePoint Designer.
    We can use the “Call HTTP Web Service” action to achieve it.
    I had create a sample workflow to get the first row of a list as below, you can have a look at it.
    Note: I had a custom column called “CSing”.
    Result:
    For more information:http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Get all the values from a multiple select in a multipart form

    Hi there!
    I am using a form with enctype="multipart/form-data" in order to upload files from the form.
    I have read this page: http://commons.apache.org/fileupload/using.html and everything works well for my form.
    The only problem is that I can't get all the values from a "multiple select" html object. I get only one value.
    Using servlets I have used this method:
    public java.lang.String[] getParameterValues(java.lang.String name) But now I have enctype="multipart/form-data" in my form and I can't use this way...
    Is there a way to get all the values of a multi-valued parameter?
    Thanks a lot!
    Stefano

    Hi
    I have got solution for this problem so, I am listing here logic
    assume tag name of html
    <select name="moption" multiple="multiple">
    iterate it in as
    String moption="";
    boolean cnt=true;
    while(itr.hasNext())
    FileItem fi=(FileItem)itr.next();
    if(fi.isFormField())
    if(fi.getFieldName().equals("moption"))
    if(cnt==true)
    moption=fi.getString();
    cnt=false;
    else
    moption=moption+","+fi.getString();
    If wants more help then mail me your problem
    at [email protected]
    Thanks!
    Anand Shankar
    Edited by: AnandShankar on 6 Nov, 2009 12:54 PM

  • How to display all the surveys using content query web part

    Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
    however, it returned nothing. Did I miss anything?

    Hi,
    OOTB Survey List does not contain any
    Content Types and it has the following structure:
    Response entry is represented by
    List Item
    Response entry consist of questions and answers, where Question correspond to
    Field and Answer to Item value respectively.
    For querying Survey List via CQWP  the following properties could be used
    BaseType 
    <Lists BaseType="4">
    ServerTemplate
    <Lists ServerTemplate="102">
    Example
    To retrieve all the responses from Survey lists, specify List Type property as shown on picture
    Reference:
    http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to display all distinct values without duplicates.

    Hi Pros,
          I want to present a values list in dashboard, but this list have much duplicates, so when dispalying, I want to display all distinct values without duplicates.

    Hi,
    You can avoid the duplicates from the source side or use a filtered row option in the component.
    Arun

  • How Can I get all the values of a DBMS package?

    Hi all
    I'm using this "dbms_output.put_line(DBMS_DB_VERSION.VERSION || '.' ||DBMS_DB_VERSION.RELEASE);" to show the version. But how Can I get the all the values from DBMS_DB_VERSION ? Is there a common way ?
    Thanks .
    Best
    Laurence

    Hi,
    Don't think that's possible. Even if it were, you wouldn't be able to use/display BOOLEAN type in SQL.
    If you just aim to see what they are, you could do something like this
    select text
      from all_source
    where owner = 'SYS'
       and name = 'DBMS_DB_VERSION'
       and type = 'PACKAGE';Or even
    select dbms_metadata.get_ddl('PACKAGE', 'DBMS_DB_VERSION', 'SYS') from dual;My version is:
    SQL> select * from v$version where rownum = 1;
    BANNER                                                         
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    1 row selectedIn 11g you also have [PL/SCOPE|http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10471/adfns_plscope.htm#ADFNS02203] which might help you even more.
    Regards
    Peter

  • Getting all the values from a JList

    Hi,
    I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.

    Use getModel() on the list to get the ListModel and then call getSize() and getElementAt(int) to loop over the elements
    HTH
    Mike

  • How to find the list of all the schedules on SAP BW server ?

    Hi.
    I am not familiar with BW  and request some advise.
    We would like to have some information with regard to list of all the jobs / schedules which are running on our BW server.
    With date / time./ daily /weekly/ whatever,
    With start time and end time ... of the schedule.
    Which transaction - will help me to get this information.
    Because we would like to see the entire schedules list and then schedule some jobs on the BW server.
    Can anyone help me on this.
    Thanks in advance.
    Kind regards
    Indu

    Goto t-code SM37
    1)Give job name and user name as *
    2) Select the job status: Scheduled/Released/ready/Active/Finished/Cancelled
    3)Job start condition :Input from Date and To Date (From when you would like to see the jobs)
    4)Now execute, system will display all the jobs accordingly.

  • Any function module to read all the values in Tcode-PPQD?

    Hi all
    Is there any function module to read all the values in Tcode-PPQD (Display Qualifiaction Catalog).
    and any idea what tables are involved to get these values like parent and child relationship?
    Thanks in advance.
    Murali.

    Murali,
    you can use the following..
    data: w_sobid type sobid, "Qualification ID
          w_objid type objid. "Qualification Catalog
    select objid  into w_objid
                  up to 1 rows
                  from HRP1001
                 where otype = 'QK'
                   and plvar = '01'
                   and istat = 1
                   and risgn = 'B'
                   and relat = '030'
                   and endda ge sy-datum
                   and begda le sy-datum
                   and sclas = 'Q'
                   and sobid = w_sobid.
    endselect.
    if sy-subrc eq 0.
    write: / w_objid,w_sobid.
    endif.
    Regards,
    Suresh Datti

  • Cannot display all the tables of the schema!!!

    Hi:
    I use the oracle sql developer on the windows xp, I found that the tables tab cannot display all the tables of the schema owner, I use the sql "select count(*) from user_tables" I found the result is more than the tab can be display, and I also press the "show more" already.... does anyone can help me ???

    Similarly, I have 852 tables owned by the connected user (selected count from user_tables and checked the user tables report which has this many records returned), but when I double-click on the "Show More" and select Show All, I only get approximately 375 tables listed.
    It doesn't help that the sorting is different - ie ASF_ comes before ASFB in the connection pane but the other way around in the report.
    However, it looks as though the problem is that tables that are not analysed (based on the report data in DATE_LAST_ANALYZED) are not being displayed under the Table node.

  • Prompt in webi not showing all the values

    I have created a universe based on a BI query.in the BI query there is a variable for the profit center which has been used in the characteristic restrictions.When i create a webi report based on this universe,the prompt for the profit center is showing only 1 value.It is not showing the rest of the values.Pls help.

    Hi,
    1. Try to check at BI query level whether values are there for profit center column or not.
    2. Try to do what susney said. If it doesn't work follow 3.
    3.  In universe level go to the profit center object  on which you created prompt-> click on object properties -> properties -> edit list of lovs -> then a query panel appers to you -> run and check whether all the values appering to that object ot not.
    4. If all the values appering then check whether any filters are applied to profit center object in universe level/report level.
    Cheers,
    Suresh Aluri.

Maybe you are looking for