OADefaultListBean to display all the values
Hello,
Using OADefaultListBean, i was able to display all the selected values using the below logic but how to get list of all the values in the OADefaultListBean instead of just the selected ones?
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
In the above code, pageContext.getParameterValue(name) gives the list of all the selected values but how to get the list of all the values?
Thanks
KK
Basically my whole point in doing this is to give an option of ALL in the OADefaultListBean so that just by selecting the ALL in the list, it should technically select all the values.
Thanks a lot in advance for your help
Similar Messages
-
Parameter List displaying all the values on Parameter form
Dear All...If I uncheck the "Restrict List to predetermined values" option, then report parameter form displays all the values on web parameter form instead of displaying those values in the List Item. Is it the Default behaviour of Oracle Reports 10g or Can I control it anyway because if I've 1000 entries in a list, then displaying all those values openly on the form is an ugly thing and it increases the size of parameter form very much.
Hello,
A solution is provided in the Note :
Note.465886.1 How to Implement an Alternate Solution to Unrestricted List Of Values (LOV) in Parameter Form on the Web:
regards -
When the combobox is rendered all the values displayed look like [object Object].
I wasn't sure where to post this so please forgive me.
I am trying to populate a combobox with a series of values
returned from a Coldfusion method that retrives a resault froma
database. Basically all the data from a table of staff.
<cffunction name="getUsers" access="remote"
returntype="array">
<cfquery name="q" datasource="#datasource#">
SELECT *
FROM STAFF_CHARTS_STAFF_TEMP
</cfquery>
<cfset aRecordset= querytoarray(q)>
<cfset flash.result=aRecordset>
<cfreturn flash.result>
</cffunction>
<cffunction name="querytoarray" returntype="array"
output="No">
<cfargument name="q" required="Yes" type="query">
<cfset var aTmp = arraynew(1)>
<cfif q.recordcount>
<cfloop query="q">
<cfset stTmp = structNew()>
<cfloop list="#lcase(q.columnlist)#" index="col">
<cfset stTmp[col] = q[col][currentRow]>
</cfloop>
<cfset arrayAppend(aTmp,stTmp)>
</cfloop>
<cfelse>
<cfset stTmp = structNew()>
<cfloop list="#lcase(q.columnlist)#" index="col">
<cfset stTmp[col] = "">
</cfloop>
<cfset arrayAppend(aTmp,stTmp)>
</cfif>
<cfreturn aTmp>
</cffunction>
The result from a call of CF method getUsers is set as the
data provider to ComboBox with id = "cb"
<mx:RemoteObject
id="myService"
destination="ColdFusion"
source="staff_ratings.staff_Ratings-debug.staff"
showBusyCursor="true">
<mx:method name="getUsers" result="handleResult(event)"
fault="Alert.show(event.fault.message)"/>
</mx:RemoteObject>
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
[Bindable]
public var sResult:Array;
public function handleResult(event:ResultEvent):void{
sResult=event.result as Array;
cb.dataProvider=sResult;
]]>
</mx:Script>
However when the combobox is rendered all the values
displayed look like [object Object].
I think the problem is that the result is a array of arrays
so I need to find away to ectract a particular colun of data into
the combobox
How do I fix this?This is what I did for a single field.
If you were wanting the to have muliple fields in the
dropdown, I would concatenate them in the query.
something like
select fname + ' ' + lname + ' ' + anotherfield as tech from
dbo.table
<cffunction name="getTech" output="no" access="remote"
returntype="query">
<cfset var qTech="">
<cfquery name="qTech" datasource="datasource">
select tech
from dbo.table
group by tech
order by tech
</cfquery>
<cfreturn qTech>
</cffunction>
<mx:RemoteObject
id="dataManager"
showBusyCursor="true"
destination="ColdFusion"
source="cust.components.cfgenerated.Records">
<mx:method name="getMasterQuery"
result="getMasterQuery_result(event)" fault="server_fault(event)"
/>
<mx:method name="deleteItem"
result="deleteItem_result(event)" fault="server_fault(event)" />
</mx:RemoteObject>
<mx:ComboBox id="TECH"
dataProvider="{dataManager.getTech.lastResult}" labelField="tech"
/> -
How Can I get all the values of a DBMS package?
Hi all
I'm using this "dbms_output.put_line(DBMS_DB_VERSION.VERSION || '.' ||DBMS_DB_VERSION.RELEASE);" to show the version. But how Can I get the all the values from DBMS_DB_VERSION ? Is there a common way ?
Thanks .
Best
LaurenceHi,
Don't think that's possible. Even if it were, you wouldn't be able to use/display BOOLEAN type in SQL.
If you just aim to see what they are, you could do something like this
select text
from all_source
where owner = 'SYS'
and name = 'DBMS_DB_VERSION'
and type = 'PACKAGE';Or even
select dbms_metadata.get_ddl('PACKAGE', 'DBMS_DB_VERSION', 'SYS') from dual;My version is:
SQL> select * from v$version where rownum = 1;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
1 row selectedIn 11g you also have [PL/SCOPE|http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10471/adfns_plscope.htm#ADFNS02203] which might help you even more.
Regards
Peter -
Any function module to read all the values in Tcode-PPQD?
Hi all
Is there any function module to read all the values in Tcode-PPQD (Display Qualifiaction Catalog).
and any idea what tables are involved to get these values like parent and child relationship?
Thanks in advance.
Murali.Murali,
you can use the following..
data: w_sobid type sobid, "Qualification ID
w_objid type objid. "Qualification Catalog
select objid into w_objid
up to 1 rows
from HRP1001
where otype = 'QK'
and plvar = '01'
and istat = 1
and risgn = 'B'
and relat = '030'
and endda ge sy-datum
and begda le sy-datum
and sclas = 'Q'
and sobid = w_sobid.
endselect.
if sy-subrc eq 0.
write: / w_objid,w_sobid.
endif.
Regards,
Suresh Datti -
Sum of all the values in a field
I have a report which needs to sum all the values of KONV-KBETR where KONV-kinak NE 'A'.
How do i write the code.
Can anyone help me in wrting the code..
This value i have to finally display in my internal table as one value.data: sumf type i.
select sum( kbetr ) from konv into sumf where kinak <> 'A' group by konv.
write: sumf.
Message was edited by:
Ramu -
How to display all the surveys using content query web part
Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Query to display all the documents
Hi
How to display all the document numbers (quotations, orders, invoices etc), posting dates in three columns i.e. Cust Code, Doc No , Posting Date?
Since all the tables storing this information having the same column names do you think it is possbile? then how to write a query?
thanks
SV ReddySV,
what Raja said is correct. The steps are to write the query the fields you want to display in the query, so it will be as follows:
select docnum, cardcode, doctotal, objtype from ORDR
then use UNION ALL, the union all is used to join the other tables e.g. purchase, good receipt or good issue to the above sales order query but must have same fields.
It will be as this follows:
select docnum, cardcode, doctotal, objtype from ORDR
union all
select docnum, cardcode, doctotal, objtype from OPOR
union all
select docnum, cardcode, doctotal, objtype from OIGN
union all
select docnum, cardcode, doctotal, objtype from OIGE
since the result objtype here is a value, I use "case when" to display objtype in the words and user can understand the document name.
It could be mixed in all the 4th queries and will not give error result.
Rgds, -
How to display all distinct values without duplicates.
Hi Pros,
I want to present a values list in dashboard, but this list have much duplicates, so when dispalying, I want to display all distinct values without duplicates.Hi,
You can avoid the duplicates from the source side or use a filtered row option in the component.
Arun -
Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com -
Get all the values from a multiple select in a multipart form
Hi there!
I am using a form with enctype="multipart/form-data" in order to upload files from the form.
I have read this page: http://commons.apache.org/fileupload/using.html and everything works well for my form.
The only problem is that I can't get all the values from a "multiple select" html object. I get only one value.
Using servlets I have used this method:
public java.lang.String[] getParameterValues(java.lang.String name) But now I have enctype="multipart/form-data" in my form and I can't use this way...
Is there a way to get all the values of a multi-valued parameter?
Thanks a lot!
StefanoHi
I have got solution for this problem so, I am listing here logic
assume tag name of html
<select name="moption" multiple="multiple">
iterate it in as
String moption="";
boolean cnt=true;
while(itr.hasNext())
FileItem fi=(FileItem)itr.next();
if(fi.isFormField())
if(fi.getFieldName().equals("moption"))
if(cnt==true)
moption=fi.getString();
cnt=false;
else
moption=moption+","+fi.getString();
If wants more help then mail me your problem
at [email protected]
Thanks!
Anand Shankar
Edited by: AnandShankar on 6 Nov, 2009 12:54 PM -
How to get all the values in the Select-option.
Hi,
I got the select-option field so_week, for eg. If I give 200923 to 200926 (year and week) in the selection screen and then I need to pass this value (200923) to the FM 'ZWEEK_GET_FIRST_DAY' to get the first day of the week.
My question is how can i get all the values from the select option, (i.e) i need to get 200923, 200924,200925, 200926.
Regards,
Anbu.Hello,
I will prefer Max's solution. But just for the sake of this req.
i need to get 200923, 200924,200925, 200926
i am proposing my soln:
DATA: V_WEEK TYPE RSCALWEEK.
SELECT-OPTIONS: S_WEEK FOR V_WEEK NO-EXTENSION OBLIGATORY.
AT SELECTION-SCREEN.
DATA:
V_COUNT TYPE I,
V_ADD TYPE I,
RT_WEEK TYPE RANGE OF RSCALWEEK,
RS_WEEK LIKE LINE OF RT_WEEK.
V_COUNT = ( S_WEEK-HIGH - S_WEEK-LOW ) + 1.
DO V_COUNT TIMES.
RS_WEEK-SIGN = 'I'.
RS_WEEK-OPTION = 'EQ'.
RS_WEEK-LOW = S_WEEK-LOW + V_ADD.
APPEND RS_WEEK TO RT_WEEK. "RT_WEEK--> Will contain the week values
CLEAR RS_WEEK.
V_ADD = V_ADD + 1.
ENDDO.
@Max: I was stupid enough not to think of your solution. Need to leave office
Cheers,
Suhas -
How to get all the values from the dropdown menu
How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtestThe findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up. -
Getting all the values from a JList
Hi,
I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.Use getModel() on the list to get the ListModel and then call getSize() and getElementAt(int) to loop over the elements
HTH
Mike -
How to get all the values in one column of a JTable
How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.
Maybe you are looking for
-
i have an old apple id coming up on my iphone. i do not have a valid password and every attempt to reset it either by email or by questions does not work. When i select email to reset i do not receive an email in any of my mail boxes. when i select a
-
New ipod video not recognized by my computer at all
i have an ipod mini and itunes on my windows xp computer. i just bought the new ipod video that it is not recognized by my computer at all. i plug it in and the entire computer freezes. if i plug in my mini everything works fine. i have tried updatin
-
External drive goes read only with error -50 after time
Running the special release of 10.8.2 for Mac Mini (2012) that was recently released. I have two external USB drives. The first contains my iTunes collection and the second is my time machine backup disk. The iTunes drive seems to go read only aft
-
How can I read and write encrypted Mails with my iPhone?
Thanks for any help.
-
Hi All, I currently have my iTunes library on my external hard drive. I was thinking of moving it to my macbook so I could have it with me. My first question is: what is the easiest way to copy everything to my macbook? My second question is: does an