Parameter passing problem between TS-LabView

Hi
I am getting crazy with this problem. Basically I have a vi, in which you can change some parameters of a step type. I put this step type into a seq, open the Edit substep (the problematic vi), and I can change some parameters, respectively: Compare, Command, Command_params and MasterData (see attached image). When I press the OK button in my "Edit" vi, the parameters are saved into the TS variables of my step type, without failure.
The problem pops up only, when I push the CANCEL button, I expect that all the TS parameters keep the original value. This is the case...except one variable, called "Compare". All the others keep the previous values, so Command, Command_params and MasterData are ok. "Compare" is initialized to empty string :-(
Originally "Compare" was a Boolean, it was always initialized to FALSE, when I clicked the cancel button. I thought that is the problem.
Then I changed it to Ring. It was initialized always to 0.
Then I tried numeric, enum etc, always was initialized to 0, or in case of string, an empty string.
Why is it so? I attached my vi, you can look into it.
Attachments:
params.jpg ‏42 KB
Edit_APM_ATAPI.vi ‏222 KB

Hi,
In your first frame, you have connected all the other inputs to there respective outputs using local variables except for one, Compare and Compare out.
Shouldn't you connect this together so the output picks up what you have inputed to the VI.
What are you inputing into Compare, because if you are passing an empty string then that control seems to except the empty string, Even though you have the setting Allow Undefined strings disabled.
I'm using LabVIEW 7.1
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

Parameter passing problem to standard JSP iView

Hi,
I'm trying to launch a standard iView with some a parameter directly from the browser by calling the url http://<server>/<iview>?<param>=<value>
The iView ID is com.sap.pct.hcm.ecmmain.approval and by looking at its details from the content catalog I saw there was a property called CREVI. I would like to fill this in but the iview doesn't respond to the URL params at all. Setting them staticly by editing the iView works perfect.
I have also checked that the "Parameters to pass from Page Request" property includes * and excludes some other properties than the one I'm testing.
I thought this was going to be simple but can't just make it work..I guess I'm missing something basic or the property can't be used? Any ideas?
Thanks,
Mikko

Hi Mikko,
We have found inconsistencies with regards to parameter passing in the URL, sometimes they are read and sometimes not. I suggest that you try to change the order of the parameters as this can affect if its read. I also believe other parameters can interfere whether or not it is read so try various scenarios.
Cheers,
John

URGENT: Parameter Passing Problem

In Forms 6i I am sucessfully passing parameters from one form to another. The problem is I want the receiving form to execute the query at startup. I cant run execute_query; unless the form is in enter_query mode. In a trigger execute_query cannot be run in Enter_Query mode. So I am stumped. Ideally I wanted to try:-
-- Initailise Block Items with Parameters --
Enter_Query;
:interview.Position_ID := :PARAMETER.p_Position_ID;
:interview.Candidate_ID := :PARAMETER.p_Candidate_ID;
Execute_Query;
Obviously the reasons above stop me doing the above example.
Please Help

Hello
This example is base on the dept table.
Please try this
trigger ->WHEN-NEW-FORM-INSTANCE
:GLOBAL.my_var := 10;
trigger ---> PRE-QUERY
SET_BLOCK_PROPERTY('emp', DEFAULT_WHERE, 'DEPTNO= ' ||:GLOBAL.my_var);
it works fine in my little example put the trigger on Forms level.
Best regards Patrick.

How to solve parameter passing problem?

I have a report that can be place on any Portal page and it requires several parameters.
The report is based on a query:
select bldgname
from building
where (bldcntry = :cntry or :cntry is null) and
(bldstate = :state or :state is null) and
(bldcity = :city or :city is null)
The LOVs for the bind variables need to be linked, i.e. State LOV is function of Cntry LOV and city LOV is function of both cntry LOV and state LOV.
I can't use the Customization screen because it doesn't allow linked LOVs.
I can't use a master detail form because I would have to create a table consisting of the 3 bind variables, M/D forms don't work with views. Since this is just one of 60 reports I have to do, it would mean adding 60 of these pseudo tables.
I was thinking of placing a form, which can have linked LOVs, on the same page as the report, and then calling the page and passing the values of the LOV to three page parameters. Unfortunately, I need to dynamically determine the url of the page the report and form are on and p_page_url doesn't seem to be accessible from a form, although it is from a report, I have a TAR on this issue.
So I wonder if anyone has an idea how to solve this problem?
Larry

Hi,
Try calling the report from the success procedure of the form
Here is an example which calls the report from the success procedure of the form.
declare
flightno number;
ticketno varchar2(30);
blk varchar2(10) := 'DEFAULT';
l_url varchar2(2000);
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
l_url := 'http://domain/pls/reportname.show?p_arg_names=flightno&p_arg_values='||flightno||'&p_arg_names=ticketno&p_arg_values='||ticketno;
call(l_url);
end;
Thanks,
Sharmila

URL Parameter passing problem

Below #name# displays the correct information from the gather table.
For instance, if pearl is logged in with users.userID = 5, then #name# displays mek, tiff which is correct.
But,in the a href, display_graphic2.cfm?userID=5 for both mek and tiff. And I need it to equal the userID that is in the users table so clicking on mek would link to: display_graphic2.cfm?userID=4 and tiff would link to: display_graphic2.cfm?userID=3
How can I do this?
gather table data
gatherID name
3     pearl
5     mek
5     tiff
6     sammy
users table data
userID     name
3     tiff
5     pearl
6     vi
4     meka
Code:

<cfquery name="matches" datasource="gifts">
     SELECT gather.name, gather.gatherID, users.userID
     FROM gather INNER JOIN users
     ON gather.gatherID=users.userID
     WHERE gather.gatherID=<cfqueryparam cfsqltype="cf_sql_integer" value="#session.userID#">
</cfquery>

See: <cfoutput query="matches">
          <a href="display_graphic2.cfm?userID=#userID#">#name#</a>,
     </cfoutput>

Not sure what the question is. In that data with that SQL statement,
userID and gatherID will always be the same, since it's an INNER JOIN on
gatherID = userID, so those IDs of 3 and 4 will never exist in the query,
only 5. It looks like you need to be joining on name, not ID:
That would get you userID '3' for 'tiff' and userID '4' for 'mek' (assuming
that 'meka' is a typo in the users table).

Parameter Pass Between Portlets

Hi,
I'm trying to get a parameter pass between two portlets on the same page, I've looked at the PDK samples but have not been able to get either working, I'm on 9iAS R2 (9.0.2.0.1.). I've installed the PDK and loaded up the various samples. Any information or guidance appreciated. In a nut shell I'd ideally like to pass a parameter from a report (java or pl/sql) in one portlet to a portlet next to it on the same page which can then run a second report (java or pl/sql).
Regards
Stephen

Hi Peter,
We have an omniportlet that displays a graph, we want the user to be able to pick a value from this graph and pass it as a parameter to another page containing another omniportlet which would select values based on the parameter value.
We have 9ias version 9.0.2.6.2. Your help will be greatly appreciated.
thanks,
Saranya

Pass 2D array from LabVIEW to C# problem

Hi , I have made a dll using .net assembly to use my labview code in c# . I can easily pass string , numerical and 1D arrays from labview to c# and vice versa, but when I want to read back 2D U16 array from Labview in c# I get the following exception although they have exactly the same type (ushort)
Cannot widen from source type to target type either because the source type is a not a primitive type or the conversion cannot be accomplished.
Could you please let me know how should I pass 2d array from labview to c#
Thanks

If all else fails, you could pass n 1D arrays across and then put the original 2D array back together. That's probably how the computer would do it behind the scenes, anyway.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

OBIEE 11G - Issue passing parameters between two reports

Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
Gavin

Hi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar

Pass Values between two Function Modules RFC in Portal

I need to pass values between 2 FM RFC.
I have an implicit enhancement in HRMSS_RFC_EP_READ_GENERALDATA RFC function module.
PERNR LIKE PSKEY-PERNR
ENHANCEMENT 1 Z_ESS_EXPORT_PERNR.    "active version
EXPORT pernr to memory id 'PMK'.
set parameter id 'PMK' field pernr.
ENDENHANCEMENT.
On the other hand an RFC function module that has the code:
        pmk    LIKE PSKEY-PERNR,
        pmk_2 LIKE PSKEY-PERNR.
get parameter id 'PMK' field pmk.
IMPORT pmk_2 FROM MEMORY ID 'PMK'.
When the execution is done in development environment, the modules function at the level of R3, the "get parameter id" works only if the debbuger is classic, otherwise not work. The Import to memory id never works.
In the environment of quality, r3 do not work any of the 2 sentences. If run from portal (which is as it should be) does not work.
Thanks if anyone can help me get the problem. Both function modules are executed at the portal.
Regards
Edited by: Daynet1840 on Feb 15, 2012 2:02 AM

When the execution is directly in r3, in development environment or quality, does the set / get parameter id. Export / Import memory id not work.
But if the FM are called from the portal, does not the set / get parameter id.
I tried changing the sentence as I indicated harishkumar.dy still not working.
Madhu: They're in different function groups, one is standard and the other not.
Regards
Edited by: Daynet1840 on Feb 15, 2012 3:08 PM
Edited by: Daynet1840 on Feb 15, 2012 3:11 PM

Parameter passing

Hi All
please help me on how to pass parameter in report , apex 4.1
Thanks

>
Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "951819".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
please help me on how to pass parameter in report , apex 4.1This is very basic and is covered in the <i>Oracle® Database 2 Day + Application Express Developer's Guide</i> which has a section on "Linking a Column Value to Another Page". You should complete this tutorial to understand fundamental APEX concepts before attempting to create other applications or using advanced techniques.
The <a href="documentation also covers the topic, describing how to create parameterised links in standard and interactive reports.
It's also important to understand the APEX URL syntax and how this is used to link pages and pass values between them. Note that it is not good practice to pass large amounts of data via the URL. Only pass discrete alphanumeric values in this way. Other values required on the target page can be retrieved in item source and default properties, computations or processes using these values, and/or by referencing other page or application item values already in session state.

Pass parameters between forms using a menu

I use a menu to switch forms. However, I have problems to pass paramenters between the froms.
Any suggestions ? Thanks.

There are 2 means:
1. The most simple to code is to use global vars. Still, you may get into some trouble managing them (erasing them when you no longer need them).
2. Use parameter lists. RTM about that. It's a bit complicated, but feisable, allowing to pass params whe using open_form or run_product (run_report).
One more thing: when referencing forms items from menu code you have to use name_in(), and for assigning values to form-items using menu code you have to use copy().
null

JRC bug: apostrophe in string parameter passed to Crystal Report with Command datasource to SQL Server

Post Author: nl11087
CA Forum: JAVA
A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
Reproduction:
1. create a database db1, create a table table1 with a String type column col1.
2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
Exception StackTrace:
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
... 17 more
Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
... 23 more
Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
... 35 more
Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
... 36 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
... 48 more
- JRCAgent3 detected an exception: An error occured while exporting the report
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)

Post Author: nl11087
CA Forum: JAVA
A single quote/apostrophe in string parameter passed to a Crystal Report with Command datasource connecting to a SQL Server database, using sqljdbc driver does not escape the special character correctly. When doing a preview in the Crystal Reports IDE it allows you to escape the input parameter as expected and work correctly, but through the JRC component it fails. For string parameters without special sql server characters I experience no problems at all. When replacing the Command with a direct table there is also no problem.
Reproduction:
1. create a database db1, create a table table1 with a String type column col1.
2. Create new report Report1.rpt, create a connection to above, Add Command using 'SELECT col1, col2, col3 FROM table1 WHERE col1 = '{?Par1}' . Add a parameter field Par1 : String
3. In your java stand alone application using JRC add the parameter Par1 with a value "Jon Doe's Value" containing a single apostrophe. Export to PDF. (I also tried MSWord and this failed too, similar behavior). Additionally, in another test try to replaceAll("'","''") to escape it, preventing the code to break, but now it does not retrieve the expected row anymore and you end up with an empty report.
Exception StackTrace:
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)
Caused by: com.crystaldecisions.reports.formatter.formatter.c: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.if(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.l.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.<init>(Unknown Source)
at com.crystaldecisions.reports.formatter.formatter.e.p.a(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
... 17 more
Caused by: com.crystaldecisions.reports.dataengine.be: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.nr(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bn(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.bp(Unknown Source)
at com.crystaldecisions.reports.dataengine.n.else(Unknown Source)
at com.crystaldecisions.reports.dataengine.s.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.aa(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.<init>(Unknown Source)
at com.crystaldecisions.reports.dataengine.bk.a(Unknown Source)
... 23 more
Caused by: com.crystaldecisions.reports.reportdefinition.datainterface.n: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.reportdefinition.datainterface.p.a(Unknown Source)
... 35 more
Caused by: com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Incorrect syntax near 's'.
at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.ea(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.h(Unknown Source)
at com.crystaldecisions.reports.queryengine.ap.dV(Unknown Source)
at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.if(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.bc.do(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cy(Unknown Source)
at com.crystaldecisions.reports.queryengine.ae.cz(Unknown Source)
at com.crystaldecisions.reports.queryengine.b1.bc(Unknown Source)
... 36 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near 's'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
... 48 more
- JRCAgent3 detected an exception: An error occured while exporting the report
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.reports.sdk.PrintOutputController.export(Unknown Source)

How to get each value from a parameter passed like this '(25,23,35,1)'

Hi
One of the parameter passed to the function is
FUNCTION f_main_facility(pi_flag_codes VARCHAR2) return gc_result_set AS
pi_flag_codes will be passed a value in this way '(25,23,35,1)'
How to get each value from the string
like 25 first time
23 second time
35 third time
1 fourth time
I need to build a select query with each value as shown below:-
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 25 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q1,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 23 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q2,
(SELECT t2.org_id, RTRIM(xmlagg(xmlelement(e, t4.description || ';')
ORDER BY t4.description).EXTRACT('//text()'), ';') AS DESCRIPTION
from org_name t2, ref_org_name t3,code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 35 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date
group by t2.org_id) q3,
(SELECT t2.org_id, t4.description
from org_name t2, ref_org_name t3, code_table t4
where t2.att_data = t4.code
and t3.ref_code = t2.att_type
and t2.att_type = 1 and t3.code_type = t4.code_type
and to_date('01-JAN-10', 'DD-MON-YY') between t2.att_start_date AND t2.att_end_date) q4
Please help me with extracting each alue from the parm '(25,23,35,1)' for the above purpose. Thank You.

chris227 wrote:
I would propose the usage of regexp for readibiliy purposes and only in the case if this doesnt perform well, look at solutions using substr etc.
select
regexp_substr( '(25,23,35,1)', '\d+', 1, 1) s1
,regexp_substr( '(25,23,35,1)', '\d+', 1, 2) s2
,regexp_substr( '(25,23,35,1)', '\d+', 1, 3) s3
,regexp_substr( '(25,23,35,1)', '\d+', 1, 4) s4
from dual
S1 S2 S3 S4
"25" "23" "35" "1"In pl/sql you do something like l_val:= regexp_substr( '(25,23,35,1)', '\d+', 1, 1);
If t2.att_type is type of number you will do:
t2.att_type= to_number(regexp_substr( '(25,23,35,1)', '\d+', 1, 1))Edited by: chris227 on 01.03.2013 08:00Sir,
I am using oracle 10g.
In the process of getting each number from the parm '(25,23,35,1)' , I also need the position of the number
say 25 is at 1 position.
23 is at 2
35 is at 3
1 is at 4.
the reason I need that is when I build seperate select for each value, I need to add the query number at the end of the select query.
Please see the code I wrote for it, But the select query is having error:-
BEGIN
IF(pi_flag_codes IS NOT NULL) THEN
SELECT length(V_CNT) - length(replace(V_CNT,',','')) FROM+ ----> the compiler gives an error for this select query : PLS-00428:
*(SELECT '(25,23,35,1)' V_CNT FROM dual);*
DBMS_OUTPUT.PUT_LINE(V_CNT);
-- V_CNT := 3;
FOR L_CNT IN 0..V_CNT LOOP
if L_CNT=0 then
V_S_POS:=1;
V_E_POS:=instr(pi_flag_codes, ',', 1, 1)-1;
else
V_S_POS:=instr(pi_flag_codes,',',1,L_CNT)+1;
V_E_POS:=instr(pi_flag_codes, ',', 1, L_CNT+1)-V_S_POS;
end if;
if L_CNT=V_CNT then
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS));
else
V_ID:=TO_NUMBER(substr(pi_flag_codes,V_S_POS,V_E_POS));
end if;
VN_ATYPE := ' t2.att_type = ' || V_ID;
rec_count := rec_count +1;
query_no := 'Q' || rec_count;
Pls help me with fetching each value to build the where cond of the select query along with the query number.
Thank You.

Passing parameters between views in different Web Dynpro applications

Hi everyone,
I would like to pass the value of one parameter between one view in a webdynpro application and another view that is in other webdynpro application. How can I do this in a secure way?

Hi,
Check below links for passing parameters between two applications:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b083f76a-708c-2b10-559b-e07c36dc5440
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/91b6ad90-0201-0010-efa3-9626d2685b6e
Re: Pass parameters via POST in WDPortalNavigation.navigateAbsolute method
Regards,
Anagha

Issue with parameter passing in ie7 to php xml

Hi
I wondered if anyone could offer a little advice what the issue is here.
I have a page with xml generated from php in a separte file and presented by a dataset in spry.
The xml is OK and in firefox it all works but ie seems to barf on it.
The situation is this:
I have a jump menu on a front page that provides a url with anumeric parameter passed like this
platforms.php?platform_id=1
This parameter is picked up by php on the platforms.php page using the $_GET Array and is passed into the code in my Spry dataset to the file that runs my query and returns my xml- so basically the page displays a dataset filtered on this parameter id.
It works perfectly in FF.
In IE if I link straight to the page without a parameter at all- so platforms.php the page loads OK using the default parameter I have set up in the top of this page to send the default id of 1 to the code page so the spry query says platform_sql.php?platform_id=1 and the xml generator is fine with thisiel. ie I do a
if(isset($_GET['platform_id'])){
$platform=$_GET['platform_id'];
}else{
$platform=1;
The dataset loads Ok in IE but when I pass a parameter in the url from my jump menu IE gives a blank SPRY table i- it momentarily appears with just the placeholders for my dataset elements then vanishes. The source code of the page shows the correct id was set in the spry data going to my query file.
There is an error in ie saying there is a javascript error but its not any help- in ie fashion- FF shown no such errors.
I thought this might be a data type thing again in the dataset but its not - I have set the elements returned to simple strings but it still does not work.
Is there a problem passing in a parameter like this to a spry dataset?

After about half a day of mucking round I found the problem and a solution to this problem.
What appeared to have happened was that some of the older content in my database used html originally encoded using a WYSWYG editor called ktml.
Later data uses Tiny MCE. It looks like the character set of the two formats is slightly different and as a result some characters rendered incorrectly when passed through XML parsing where it specifies the character set as utf-8.
Firefox on the whole seems to ignore the issue though looking at the raw xml output of my php-xml code- where "-" characters were (dashes) there was a question mark character shown. None the less in actual use on my page the xml was produced and the dataset worked out.
In IE, it barfed at these same characters and failed to return the xml dataset.
What confused the issue more was some of my smaller datasets if they by chance never had a "-" character in rendered OK in IE- hence my default dataset (platform_id=1) worked in IE. After much experimenting I noticed other ids worked too if there was never such a character.
How I got round it was to wrap my server side data in the utf8_encode() function, and now all my xml is clean.
The javascript error being thrown was a red herring though I could not tell until I managed to run my page in ie7 with Visual Studio Express error console running- I had this on a spare machine at work so could debug with it.
All sorted now- now just need to find away to wrap all my datasets in collapsible panels that work.
K

Parameter passing problem between TS-LabView

Similar Messages

Maybe you are looking for