Parameters in webdynpro ABAP

Hi all,
where i can set the " WDDISABLEUSERPERSONALIZATION" parameter for iview?
I am very new to Webdynpro ABAP . Trying to find out the above parameters but fialed .
Thanks,
Rameshb.

Hi Ramesh,
Create an application of your WD component. Now double click on that application. Click on the parameter tab. There a table kind of thing will be displayed. Press F4. Select WDDISABLEUSERPERSONALIZATION parameter. Give its value as 'X'. By doing this user won't be able to modify the view at run time.
I hope it helps.
Regards
Arjun

Similar Messages

Portal application parameters for webdynpro ABAP

I have read several posts that indicate we can get the portal user login id in WDA by adding:
userid=<User.LogonUid> to the application parameter property in the portal iview, and then adding a corresponding parameter in the Webdynpro ABAP method HANDLEDEFAULT of the Window.
I'd like to know if there are other such system parameters (besides <User.LogonUid>) that one can pass from Portal to a Webdynpro? A list of such parameters, or a link to such a list would be very helpful.
Best regards,
Tarun

Hi,
In the Portal,
go to content Adminsittration ->Portal Content->PCD folder->Content Provided by SAP->Select your specifc folder->Select IView ->Select Application (Ex-Purchasing)->we can pass paramteres like Iviewid, IviewMode, SessionKeys Available. etc
Pls refer this if helpful.
Company.UserName
Company.UserSignature
Pls refer to this link -
http://java.sun.com/j2ee/sdk_1.2.1/techdocs/api/javax/servlet/http/HttpServletRequest.html#getUserPrincipal
Reward if helpful.
Best Wishes,
Chandralekha

Parameters in webdynpro abap application

Hi experts,
How to catch the parameters passed in a WD application in the program or view..?
Pls help me.
Thanks
Aisurya.

Aisurya Puhan wrote:
> How to catch the parameters passed in a WD application in the program or view..?
> Aisurya.
Program ? - There are no program involved in webdynpro. I guess your primary question is about to read the URL parameters and make it available to (Component/View) controllers.
This has been discussed many many times, easy search on this forum would bring many results like the below one.
[http://wiki.sdn.sap.com/wiki/display/WDABAP/HowtoreadURLparametersinWebDynproforABAP|http://wiki.sdn.sap.com/wiki/display/WDABAP/HowtoreadURLparametersinWebDynproforABAP]

Parameters in selection screnn in webdynpro abap

Hello Gurus,
We have a requirement to maintain parameters in selection screnn in webdynpro abap.
now we are able to create parameters using wdr_select_options componet usage of method add_parameter_field.
we need f4 help also for this parameter.
how can we pass exporting parameters to this method.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Babu

Hi Rajsekhar,
this is sample code of select option for carr id field. so you can guess and change according to your requirement.
Observe the highlited code in below coding.
nOTE: S_CARR_ID IS THE DATA ELEMENT OF CARR ID FIELD, FOR THAT I AM APPLYING SELECT OPTIONS IN BELOW CODING.
WRITE THE BELOW CODE IN WDDOINT( ) METHOD OF REQUIRED VIEW
Data: lt_range_table type ref to data,
     read_only type abap_bool.
WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS->WD_CPIFC_SELECT_OPTIONS( ).
WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS->INIT_SELECT_SCREEN( ).
WD_THIS->M_HANDLER->SET_GLOBAL_OPTIONS(
     I_DISPLAY_BTN_CANCEL = ABAP_FALSE
     I_DISPLAY_BTN_CHECK = ABAP_FALSE
     I_DISPLAY_BTN_RESET = ABAP_FALSE
     I_DISPLAY_BTN_EXECUTE = ABAP_FALSE ).
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'S_CARR_ID' ).
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
*          I_ID = 'S_CARR_ID'*
*          IT_RESULT = LT_RANGE_TABLE*
*          I_READ_ONLY = READ_ONLY* ).
BELOW CODE IN REQUIRED ACTION( SAY IN SOME BUTTON ACTION WHICH WILL RETRIEVE THE DATA FROM DATABASE TABLE USING SELECTI OPTIONS VALUES)
fIRST THE GET REFERENCE TO NODE( CTRL F7->READ CONTEXTB-FLIGHT NODE )
***THEN BELOW CODE
DATA: RT_CARRID TYPE REF TO DATA.
DATA:IS_FLIGHT TYPE TABLE OF SFLIGHT.
FIELD_SYMBOLS: <FS_CARRID> TYPE TABLE.
RT_CARRID = WD_THIS-> M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
ASSIGN RT_CARRID->* TO <FS_CARRID>.
SELECT * INTO CORRRESPONDING FIELDS OF TABLE IS_FLIGHT
   FROM SFLIGHT WHERE CARRID IN <FS_CARRID>
NODE_FLIGHT->BIND_TABLE( IS_FLIGHT ).

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Create PMD (Clinical Document) Document from Webdynpro ABAP

Greetings everyone,
I have developed two PMD document category(Tcode :N2T6 ) for Clinical documents in SAP R/3 and somehow with the limitation of R/3 in terms of developing user friendly screens like Auto fill and image processing etc...,Users do not satisfy with it.So we are planning to develop in Webdynpro ABAP.But i am not sure how do we integrate the webdynpro development with IS-H PMD (clinical documents) documents ,also I am looking for BAPI's to create our customized parameterized documents.Any help will be really appreciated.
Thanks,
Vignesh

Hi Vignesh,
You are right that certain features, such as auto-completion, are not supported in the PMD toolset. But as most of the data captured in those documents have a high importance for treatment process, you need to elobarate whether such a feature has any impact on patient safety. Just a quick one - user types An ... and the system determines matching diagnoses such Anorexia or Angina. In case the user picks the wrong one by accident the patient safety is an issue.
Other features such as image management can be used. For that you need to use a PMD link module which does provide the image integration. Siemens will ship in the next release EhP6 such a link module for a third party imaging software. Beforehand the link module use with custom development.
In general Siemens has started a product redesign program named "Smart UI". It's major aim is to provide an up-to-date user interface for all major application within i.s.h.med. The very first application we plan to ship is a web-based electronical medical record.
In case you still want to develop your application, I'm sorry to say, but there are no BAPIs or Web services in the standard delivery. For changes to existing documents you can utilize the PMD API of generator version 2. But be aware that document creation is not supported by the API. You need to have a document. Also certain user exit developments may brake a change without having the GUI running. For instance a popup in the save routine will cause a dump if no SAP GUI is available.
Hope this help.
Axel Biernat
Siemens AG
Product Commercialize

DMS Document not getting created thru Webdynpro ABAP Strange Problem

Dear all,
My requirement is that I have a Webdynpro ABAP application sitting on SAP Server1 and I am having a FileUploadUI Element in there for uploading files and we have SAP Server2 with the DMS configured. So, what we have done is we have an RFC in SAP Server2 and we are calling it from our webdynpro ABAP application sitting on SAP Server1. And we are calling BAPI_Create2 with all the necessary parameters in this RFC to create the DMS document with the file from webdynpro ABAP application. But its not working. I am passing the Presentation Server File Path of the File to the BAPI_create2.Even if I write the file to the application server of SAP Server2 and then pass this file path to the BAPI_Create2 then also it doesn't work but when I execute this RFC locally in the SAP Server2 with the presentation server file path It executes successfully.
I don't know what I am missing.
Please help.
Thanks and regards,
--Sonal

Dear Thomas,
Suppose I have got the file copied to the application server in SAP Server2 using datasets from WDA in SAP server1.
Now I have an RFC say ZFILE_UPLOAD in SAP Server2 for which we have made an SAP ABAP RFC Connection from SAP Server1. In this RFC I am calling BAPI_create2 using the application server filepath(of SAP Server2) in docfile parameter along with ur suggested destination then also it doesn't work. Gives an error that "error in storing and checking file" i.e. Error 253.
One more query how to handle the file upload of different file types say I am uploading a pdf file from my webdynpro abap application in SAP server1. Then I get the xstring and pass it to ZFILE_UPLOAD and convert it into binary and write it there in SAP Server2 using datasets. Is it possible to upload any kind of file and then creating the DMS document out of it?
and how to call this RFC?
Thanksn and regards,
--Sonal

Integrating WebDynpro ABAP applications with UWL for workflow in Portal

Dear
We want to integrate an abap webdynpro application as task in the workflow with UWL.
More information was found in /people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
But no answer on the following issue:
We use the transaction SWFVISU to prepare standard setting for our task. This defines how a task is executed, once you select the task subject line on the worklist.
Task                           TS91700001
Visualization Type             ABAP Web Dynpro
APPLICATION     z_wd_pas
DYNPARAM     IV_WIID=${item.externalId}&period=${item.PERIOD}
NAMESPACE     SAP
SYSTEM_ALIAS     SAP_BSP_EREC
But we want to start the abap webdynpro application with a dynamic parameter: period 07.2010 or 08.2010 or MM.YYYY. This parameter is a container element of the task, filled when the task is created. Also other parameters are available in the abap webdynpro application.
Component       Z_WD_PAS
Interface View PAS
Plug Name       DEFAULT
Help Menu Text
Help Link
                                                                                Package         Z_PAS
Language        EN
URL             http://saperpd1.imec.be:8000/sap/bc/webdynpro/sap/z_wd_pas
with parameters
IV_WIID     000000000000     SWW_WIID
ORG_UNIT     00000000     ORGEH
PERIOD                              SPMON
PERNR     00000000     PERSNO
Can we set the dynamic parameter list DYNPARAM from the task
or should we read the container in our abap webdynpro application described in http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal?
More information: The task is a webservice
Standard task        91700001   Z_PAS_CC
Object Category      BOR Object Type
Object Type          WEBSERVICE   WebFlow Service
Method               PROCESSDIALOG                      Dialog Service
with the following standard program code for this method:
begin_method processdialog changing container.
DATA: l_wi_objkey TYPE swotobjid-objkey.
DATA: l_wiid TYPE swwwihead-wi_id.
                                                                                CALL FUNCTION 'SWE_WI_GET_FROM_REQUESTER'
IMPORTING
    requester_workitemid = l_wi_objkey.
l_wiid = l_wi_objkey.
                                                                                CALL FUNCTION 'SWF_WSC_START_LH_DIALOG'
EXPORTING
    i_wiid                 = l_wiid
EXCEPTIONS
    url_creation_failed    = 1
    browser_launch_failure = 2
    OTHERS                 = 3.
IF sy-subrc <> 0.
CASE sy-subrc.
    WHEN 1.
      exit_return '1000' space space space space.
    WHEN 2.
      exit_return '1001' space space space space.
    WHEN OTHERS.
      exit_return '1002' space space space space.
ENDCASE.
ENDIF.
end_method.
Before calling the function SWF_WSC_START_LH_DIALOG the parameters for the abap webdynpro should be defined. Is this possible ?
Thanks for your suggestions.
Best regards
Luc Marent

I added below sources .
>    <ItemType name="uwl.request.webflow.WS91000001" connector="WebFlowConnector" defaultView="WorkItemRequestsView" defaultAction="launchWebDynPro" executionMode="default">
>      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
>      <Actions>
>        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
>          <Properties>
>            <Property name="WebDynproApplication" value="ZWD_WF_002" />
>            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no" />
>            <Property name="DynamicParameter" value="wi_id=${item.externalId}" />
>            <Property name="openInNewWindow" value="yes" />
>            <Property name="System" value="WDSETXXX" />
>            <Property name="WebDynproNamespace" value="sap" />
>            <Property name="display_order_priority" value="5" />
>          </Properties>
>          <Descriptions default="" />
>        </Action>
>      </Actions>
>    </ItemType>
>    <ItemType name="uwl.request.webflow.decision.WS91000001.UWLSETXXX" connector="WebFlowConnector" defaultView="WorkItemRequestsView " defaultAction="viewDetail" executionMode="default">
>      <ItemTypeCriteria systemId="UWLSETXXX" externalType="WS91000001" connector="WebFlowConnector" />
>    </ItemType>

Calling Webdynpro Java Application from Webdynpro ABAP Application.

Hi,
We have developed one Application using Webdynpro Java and I m in need to call the Webdynpro Java application from Webdynpro ABAP.
Require Suggestions to acheive this.
Thanks In advance.
Reg,
Ajay.

Dear Ajay,
Assuming that both your applications WDA & WDJ are in the portal & you don't have to pass any parameters to the WDJ application.
Write the following code on the action where you would call the WDJ application.
DATA:
        lr_compcontroller TYPE REF TO ig_componentcontroller,
        l_component TYPE REF TO if_wd_component ,
        lr_port_manager TYPE REF TO if_wd_portal_integration ,
        wa_navigation TYPE navigation.
lr_compcontroller =   wd_this->get_componentcontroller_ctr( ).
l_component = lr_compcontroller->wd_get_api( ).
lr_port_manager = l_component->get_portal_manager( ) .
* The value inserted into the navigation-target field can be found in the Portal
* content administration tab of your portal. It is the ID or PCD Location field
wa_navigation-target = pcd. " Please provide the PCD Location of the WDJ Application here.
wa_navigation-mode   = '0'. "0 = INTERNAL(same page) and 1 = EXTERNAL(new page).
CALL METHOD lr_port_manager->navigate_absolute
    EXPORTING
      navigation_target = wa_navigation-target
      navigation_mode   = wa_navigation-mode.
You can get the PCD from the Page properties of the WDJ application page in the Portal.
Hope it helps!
Warm regards,
Upendra Agrawal

WebDynPro ABAP iView not picking Portal Theme stylesheet

Hi,
We are facing issues in integrating the WebDynPro ABAP application in Portal . The WebDynPro ABAP iView is not picking the portal theme. It is picking its actual color.
We are in EP 6 SP 14.
Can anyone let me know what can be the reasons.
Best Regards
Sid

Hello,
for the web dynpro for abap application you can create a application configuration. To create the configuration
right click on the application -> create/Change Configuration -> and once you create the configuration, it will open up in browser and you can see 2 tabs structure and parameters
In parameters tab you will find an option Force Use of External StyleSheet check the box and save the configuration. Once done with this process.
Go to the iView Properties of the applications and set the application configuration name and it would take the Portal Theme.
hope this helps.
Pramod
reward points if helpful.

Issue on Creating RFx in webdynpro ABAP application - SRM Business Package

Hi
We are in to SRM 7.0 with the same version of Business Package in SAP Portal also.
I am trying to create a RFx from Portal which in turn calls the webdynpro ABAP application (Strategic Purchasing->Strategic Sourcing->Create Documents->RFx)
sap/bc/webdynpro/sapsrm/wda_l_fpm_oif.
This Application has some button called "Tech RFx", "Permissions" etc., When I click on those buttons it throws the error as below :
"There is no iView available for system "SAP_SRM": object "TechResp". For more information, contact your administrator."
Please let me know where we are missing. I have checked all the Portal permissions. Even I can able to access all other iviews except this two buttons.
Any settings or parameters required on webdynpro ABAP side.
Regards,
Raja.J

Dear Raja,
this behavior occurs if the IView com.sap.pct.srm.gp.iv_tech_resp
is not assigned to the role which is assigned to the user.
Please assign this IView to the desired user.
Here are the steps to follow in your systems:
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> Roles -> Open the desired role and
choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> PPS -> iViews -> Tendering -> Select Tech
Responses (Technical name is iView com.sap.pct.srm.gp.iv_tech_resp) and
right click and choose 'Add iView to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Best regards,
Tamas

WebDynpro ABAP Pop-Ups don't pick up the theme

Hi everyone,
I've developed a WebDynpro ABAP component that makes use of a Freely Programmed Input Help.
This input help is shown in a pop-up which doesn't inherit the portal theme. Actually it inherits only parts of it and not the whole look and feel (for instance labels are rendered fine but page background is the standard blue colour).
Unfortunately I cannot use the parameter:
WDFORCEEXTERNALSTYLESHEET=X&sap-cssurl=
because I have no control on the window (free style Input Value Help Windows are opened automatically by the framework and I parameters can't be added to the URL).
Any ideas?
Thank you.

Hi,
Refer Portal Theme in Webdynpro ABAP
This might give you some idea.
Thanks,
Chandra

Integration Webdynpro ABAP with Webdynpro Java in Portal

Hi All,
I am facing problem while integrating WDA application with WDJ. I can integrate successfuly one application and trying to invoke other one with different parameters, i am facing the problem
There is no iView available for system "XXXX_SAP_XXX": object "xxx.xxxx.xxx.xxxx". For more information, contact your administrator.
I am passing the parameters
system
object_type
object_value_name
operation
Thanks in advance

Hi Samir,
Pls look into these threads -
IE8 problem (WebDynpro ABAP iView call)
WebDynpro for ABAP and IE 8.0
Regards,
Sen

How to exit from a WebDynpro ABAP application and open another url

Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
Xavier

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
        data lo_view_cntr type ref to if_wd_view_controller.
        data lo_win_cntr type ref to if_wd_window_controller.
        data: l_parameter_list type wdr_event_parameter_list,
              l_parameter type wdr_event_parameter,
              l_val type ref to data,
              l_val_url type REF TO data.
        field-symbols: <fs> type any,
                       <fs_url> type any.
        lo_view_cntr = wd_this->wd_get_api( ).
        lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
        CREATE DATA l_val type c.
        CREATE DATA l_val_url type string.
        ASSIGN l_val->* to <fs>.
        ASSIGN l_val_url->* to <fs_url>.
        <fs> = 'X'.
        <fs_url> = 'http://your-link.com'.
        l_parameter-name = 'URL'.
        l_parameter-value = l_val_url.
        INSERT l_parameter INTO TABLE l_parameter_list.
        lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                parameters = l_parameter_list ).
      You can easily change this logic to exit application instead of redirecting to the site
       just changing to
       l_parameter-name = 'CLOSE_WINDOW'.

Creating OCI in Webdynpro ABAP

Hi Friends,
We are planning use OCI external catalog for adding items to the shopping cart. I am creating WDA application which will act as the external catalog.
In my application I am able to read the Hook_url and other parameters of the OCI configured. I got stuck in returning the hook_url by posting the html page back to SRM shopping cart which should be like below.
<HTML>
<HEAD>
SAP Open Catalog Interface: HTML - Example
<BODY bgcolor="#DED6C2">
<FORM action="<%=Request.QueryString("HOOK_URL")%>" method=post target=_top>
<input type="hidden" name="NEW_ITEM-VENDOR[1]" value = "1768">
<input type="hidden" name="NEW_ITEM-VENDORMAT[1]" value = "648570">
<input type="hidden" name="NEW_ITEM-MANUFACTCODE[1]" value = "4711">
<input type="hidden" name="NEW_ITEM-MANUFACTMAT[1]" value = "4712">
<input type="hidden" name="NEW_ITEM-EXT_QUOTE_ITEM[2]" value = "">
<input type="hidden" name="NEW_ITEM-EXT_PRODUCT_ID[2]" value = "">
</FORM>
</BODY>
</HTML>
Is this acheivable using webdynpro ABAP? If so how we can do this?
Thanks in advance.
Regards,
Prabhuraj

Hello Vikas,
I am having the same kind of requirement. We are creating Web dynpro abap component as external Catalog. When user enters or selects some kind of materials in external catalog (custom wda), the data should be returned back to Shopping cart.
I have HOOK_URL value with me, which when i call, goes back to "Create Shopping cart" screen.
How to send the data to SC screen.
I donot have the document which was referred in this post and I am unable to navigate to the link mentioned by you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bc9fa090-0201-0010-fbbf-82e1f38cd2e1?quicklink=index&overridelayout=true
Please give me a copy of document, so that i can proceed further with my requirement.
Thanks,
Guru Sane.

Parameters in webdynpro ABAP

Similar Messages

Maybe you are looking for