Parent Child Internal Reconciliation

We have a scenario in SAP 2005 SP1 Patch 44 here:
BP Customer Code (Child) - ZChild
BP Customer Code (Child) - ZParent
Step 1: Invoices processed against ZChild
Step 2: Our client attached ZParent as Consolidated BP to ZChild after invoices have been proceesed.
Note: ZChild trade debtors account is AUD
AParent trade debtors account is Multicurrency.
Step 3: When Incoming Payment is processed, a message 'A consolidated BP is defined. It is recommended to post an incoming payment for this BP. BP Summary code: ZParent'.
Step 4: When user put in ZParent, there was no invoices for payment. So, incoming payment was processed to ZChild.
Step 5: When we go to Bank Reconciliation--> Automatic Reconciliation for Internal Reconciliation, under ZChild, we only see the invoice. Under ZParent, we see nothing, so we cannot reconcile.
Step 6: When we go to BP Master screen, balances and then drill down, the transactions are displayed as unreconciled.
The problem here is:
1. We cannot reverse the Incoming payment because SAP will give an error message Incorrect general ledger code.
2. We cannot reconcile as explained above.
SAP should restrict users from attaching Consolidated BP code if the Child has open transactions.

Hello,
I tested on SBO 2005A SP01 PL45 with new business partner. If the child BP has open invoices and afterwards we add parent BP. The system does not allow to create payments. I get error message: The consolidating BP behind one or more of the selected invoices is different from the current consolidating BP [Message 3524-72].
It seems some of the payments for parent BP were also added in previous patches.
Please log a message with SAP support for the issue.
Regards,
Preety

Similar Messages

Parent child hierarchy and measure using lookup

Hi,
I'm using OBIEE 11.1.1.5 and I have an issue with a parent child hierarchy, which is setup like case 4 in this example . When I create a simple analysis using the hierarchy and a simple measure, it works fine. But when I try to use a calculated measure using a lookup formula, I get the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46036] Internal Assertion: Condition pTableRef->GetLeftTable() && pTableRef->GetLeftTable()->IsTableReference(), file server/Query/Optimizer/ServiceInterfaceMgr/Src/SQOIDriveJoinGenerator.cpp, line 568. (HY000)
Does anyone know how to get past this error?
Thanks,
Mihai

Hi,
I'm using OBIEE 11.1.1.5 and I have an issue with a parent child hierarchy, which is setup like case 4 in this example . When I create a simple analysis using the hierarchy and a simple measure, it works fine. But when I try to use a calculated measure using a lookup formula, I get the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46036] Internal Assertion: Condition pTableRef->GetLeftTable() && pTableRef->GetLeftTable()->IsTableReference(), file server/Query/Optimizer/ServiceInterfaceMgr/Src/SQOIDriveJoinGenerator.cpp, line 568. (HY000)
Does anyone know how to get past this error?
Thanks,
Mihai

Very urgent- find parent-child relationship for wbs element

Hi,
There is a certain parent child heirachy in WBS elements.My requiremnet is to delete WBS element depending on certain field , say depending on some ""status"".If the status is active in some or any of the child then I am not suppose to delete its respective parent too. This parent-child relation can have say 5 levels.
For this I require a logic /program which shall maintain the parent reference for that particular child whih I want/ dont want to delete.
I am maintaining bottom- to -top approach.
That is I shall be checking for the status of the lowest level of WBS and then going to the highest.
Please Help!
Kshitija

hi you can use following code....
REPORT zpmgmt_rpt_projinfo NO STANDARD PAGE HEADING LINE-SIZE 160.
*& Includes
INCLUDE <icon>.
INCLUDE zdata_declare_n. " include for data declaration
INCLUDE zsubr_n.          " include for both subroutines
DATA: gv_index LIKE sy-tabix,
      lv_index LIKE sy-tabix,
      date_index TYPE sy-tabix.
*& Start of Selection ( Get Data )
START-OF-SELECTION.
For initial display cnt is set to X
IF cnt EQ 'X'.
    PERFORM getdata.
    CLEAR it_final.
    PERFORM hierarchy.
    cnt = ''.
ENDIF.
*&      Form GETDATA
Fetches the data and logic for T1 and T2
--> p1        text
<-- p2        text
FORM getdata.
Getting project header data
SELECT * FROM proj
    INTO CORRESPONDING FIELDS OF TABLE it_proj
    WHERE pspid IN so_posid
    AND werks IN so_plant
    AND stort IN so_loc
    AND erdat IN so_date.
IF sy-subrc <> 0.
    MESSAGE 'Enter the valid entry' TYPE 'I'.
    STOP.
ENDIF.
LOOP AT it_proj.
    PROJECT = it_proj-pspid.
Get project & WBS element details
BAPI used gives the output in some specific format
which is used for roll-up logic.
    CALL FUNCTION 'BAPI_PROJECT_GETINFO'
     EXPORTING
        project_definition           = project
        with_activities              = 'X'
     IMPORTING
        e_project_definition         = e_project_definition
     TABLES
        e_wbs_hierarchie_table       = e_wbs_hierarchie_table.
Appending all the projects in the e_wbs.
        LOOP AT e_wbs_hierarchie_table.
          MOVE-CORRESPONDING e_wbs_hierarchie_table TO e_wbs.
          APPEND e_wbs.
          CLEAR e_wbs.
        ENDLOOP.
    CLEAR PROJECT.
ENDLOOP.
SET COUNTRY 'US'.
i_repid = sy-repid.
Getting data into internal tables
Getting project WBS element
SELECT * FROM prps
    INTO CORRESPONDING FIELDS OF TABLE it_prps
    FOR ALL ENTRIES IN it_proj
    WHERE psphi = it_proj-pspnr.
Getting project activities
SELECT * FROM afvc
    INTO CORRESPONDING FIELDS OF TABLE it_afvc
    FOR ALL ENTRIES IN it_prps
    WHERE projn = it_prps-pspnr.
SORT it_afvc BY vornr.
Getting activities start & end dates from AFVV
SELECT * FROM afvv
   INTO CORRESPONDING FIELDS OF TABLE it_afvv
   FOR ALL ENTRIES IN it_afvc
   WHERE aufpl = it_afvc-aufpl
   AND aplzl = it_afvc-aplzl.
Getting plant name
SELECT * FROM t001w
    INTO CORRESPONDING FIELDS OF TABLE it_t001w
    FOR ALL ENTRIES IN it_proj
    WHERE werks = it_proj-werks.
Logic for passing data to final internal table
Passing Project master data
READ TABLE it_proj INDEX 1.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
      EXPORTING
        input = it_proj-pspid
      IMPORTING
        output = it_proj-pspid.
    it_final-posid = it_proj-pspid.
    it_final-post1 = it_proj-post1.
    APPEND it_final.
    CLEAR it_final.
ENDIF.
Passing WBS element to the final internal table IT_FINAL
LOOP AT it_prps.
    CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
      EXPORTING
        input = it_prps-posid
      IMPORTING
        output = it_prps-posid.
     CLEAR color.
Get WBS element status ans color(T2)from OBJNR
    CALL FUNCTION 'ZGET_STATUS_N'
      EXPORTING
        objnr    = it_prps-objnr
      IMPORTING
        color    = color
      TABLES
        t_status = it_tj30t.
    IF     color = 'RED'.
      it_final-t2 = '@0A@'.
    ELSEIF color = 'YELLOW'.
      it_final-t2 = '@09@'.
    ELSEIF color = 'GREEN'.
      it_final-t2 = '@08@'.
    ENDIF.
    SORT it_tj30t DESCENDING.
Getting User statuses of WBS element at component level.
    READ TABLE it_tj30t INDEX 1.
    IF sy-subrc EQ 0.
      CONCATENATE it_tj30t-txt04 '' INTO it_final-txt04 SEPARATED BY space.
    ENDIF.
    READ TABLE it_tj30t INDEX 2.
    IF sy-subrc EQ 0.
      CONCATENATE it_tj30t-txt04 it_final-txt04 INTO it_final-txt04 SEPARATED BY space.
    ENDIF.
    MOVE-CORRESPONDING it_prps TO it_final.
    READ TABLE it_proj WITH KEY pspid = it_prps-posid.
    IF sy-subrc EQ 0.
      it_final-werks = it_proj-werks.
    ENDIF.
    APPEND it_final.
    CLEAR it_final-txt04.
Passing activity to the final internal table IT_FINAL
    LOOP AT it_afvc WHERE projn EQ it_prps-pspnr.
      CLEAR color.
Getting user status and color(T2) for Activity from OBJNR
      CALL FUNCTION 'ZGET_STATUS_N'
        EXPORTING
          objnr    = it_afvc-objnr
        IMPORTING
          color    = color
        TABLES
          t_status = it_tj30t.
      IF     color = 'RED'.
        it_final-t2 = '@0A@'.
      ELSEIF color = 'YELLOW'.
        it_final-t2 = '@09@'.
      ELSEIF color = 'GREEN'.
        it_final-t2 = '@08@'.
      ENDIF.
      CLEAR: it_final-fsavd,
             it_final-fssad.
      MOVE-CORRESPONDING it_afvc TO it_final.
Getting User statuses of WBS element at activity level.
      SORT it_tj30t DESCENDING.
      READ TABLE it_tj30t INDEX 1.
      IF sy-subrc EQ 0.
        CONCATENATE it_tj30t-txt04 '' INTO it_final-txt04 SEPARATED BY space.
      ENDIF.
      READ TABLE it_tj30t INDEX 2.
      IF sy-subrc EQ 0.
        CONCATENATE it_tj30t-txt04 it_final-txt04 INTO it_final-txt04 SEPARATED BY space.
      ENDIF.
      APPEND it_final.
      lv_index = sy-tabix.
      CLEAR it_final-txt04.
      CLEAR it_final-ltxa1.
      CLEAR it_tj30t.
      REFRESH it_tj30t.
Start Date and End Date fetched from AFVV.
      LOOP AT it_afvv WHERE   aufpl EQ it_afvc-aufpl
                          AND   aplzl EQ it_afvc-aplzl.
        MOVE-CORRESPONDING it_afvv TO it_final.
        MODIFY it_final INDEX lv_index TRANSPORTING fsavd fssad.
      ENDLOOP.
      CLEAR it_afvc.
      CLEAR lv_index.
    ENDLOOP.
ENDLOOP.
Logic for T1.
T1 is based on T2 and start date and end date of activities.
LOOP AT it_final WHERE stufe = 3
                   AND ltxa1 IS NOT INITIAL.
    gv_index = sy-tabix.
    PERFORM date_difference.
    CASE it_final-t2.
      WHEN '@0A@'.     " If Red
        IF sy-datum GT it_final-fssad.
          it_final-t1 = '@0A@'.
        ELSEIF sy-datum LE it_final-fssad AND
               sy-datum GE it_final-fsavd.
          IF gv_diff > 1.
            PERFORM date_monitor.
          ENDIF.
          it_final-t1 = '@09@'.
        ELSEIF
          sy-datum LT it_final-fsavd.
          it_final-t1 = '@08@'.
        ENDIF.
      WHEN '@09@'.     " If Yellow
        IF sy-datum GT it_final-fssad.
          it_final-t1 = '@0A@'.
        ELSEIF sy-datum LE it_final-fssad AND
               sy-datum GE it_final-fsavd.
          IF gv_diff > 1.
            PERFORM date_monitor.
          ENDIF.
          it_final-t1 = '@09@'.
        ELSEIF
          sy-datum LT it_final-fsavd.
          it_final-t1 = '@08@'.
        ENDIF.
      WHEN '@08@'.     " If Green
        it_final-t1 = '@08@'.
    ENDCASE.
    MODIFY it_final INDEX gv_index TRANSPORTING t1.
    CLEAR gv_index.
ENDLOOP.
ENDFORM.                    " GETDATA
*&      Form hierarchy
Displays the data in ALV hierarchical manner.
In coding 3 tables are used for roll-up functionality.
FORM hierarchy .
DATA: it_final1 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: it_final2 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: it_final3 LIKE it_final OCCURS 0 WITH HEADER LINE.
DATA: count TYPE i VALUE 1.
DATA: posid LIKE prps-posid.
DATA: change,
        date_mask TYPE c LENGTH 10,
        lv_index2 LIKE sy-tabix.
DATA: index TYPE sy-tabix.
DATA: up LIKE prps-posid.
Deleting duplicate entries from the it_final.*****************
DELETE ADJACENT DUPLICATES FROM it_final.
LOOP AT it_final WHERE stufe EQ 2.
    IF posid NE it_final-posid.
      posid = it_final-posid.
    ELSE.
      DELETE it_final INDEX sy-tabix.
    ENDIF.
ENDLOOP.
CLEAR posid.
LOOP AT it_final WHERE stufe EQ 3
                    AND ltxa1 EQ space.
    IF posid NE it_final-posid.
      posid = it_final-posid.
    ELSE.
      DELETE it_final INDEX sy-tabix.
    ENDIF.
ENDLOOP.
Updating a new intrnal table for roll up functionality. ********
it_final1[] = it_final[].
CLEAR: lv_index2.
LOOP AT it_final1 WHERE stufe = 3
                    AND ltxa1 IS NOT INITIAL.
    READ TABLE it_final WITH KEY stufe = 3
                                  posid = it_final1-posid
                                  post1 = it_final1-post1.
   clear change.
    IF sy-subrc = 0.
      lv_index = sy-tabix.
      IF lv_index2 <> lv_index.
        CLEAR: change.
        lv_index2 = lv_index.
      ENDIF.
      IF it_final1-t1 = '@0A@'.
        it_final-t1 = '@0A@' .
        MODIFY it_final INDEX lv_index TRANSPORTING t1.
        DELETE it_final1 WHERE posid = it_final-posid.
        CONTINUE.
      ENDIF.
      IF it_final1-t1 = '@09@'.
        it_final-t1 = '@09@'.
        change = 'Y'.
        MODIFY it_final INDEX lv_index TRANSPORTING t1.
        CONTINUE.
      ENDIF.
      IF it_final1-t1 = '@08@'.
        it_final-t1 = '@08@' .
        IF change IS INITIAL.
          MODIFY it_final INDEX lv_index TRANSPORTING t1.
        ENDIF.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
it_final2[] = it_final[].
CLEAR: lv_index2.
LOOP AT it_final2 WHERE stufe = 3
                    AND ltxa1 IS INITIAL.
    READ TABLE e_wbs WITH KEY wbs_element = it_final2-posid.
    IF sy-subrc = 0.
      READ TABLE it_final WITH KEY stufe = 2
                                   posid = e_wbs-up.
      IF sy-subrc = 0.
        CHECK it_final-t1 <> '@0A@'.
        lv_index = sy-tabix.
        IF lv_index2 <> lv_index.
          CLEAR: change.
          lv_index2 = lv_index.
        ENDIF.
        IF   it_final2-t1 = '@0A@'.
          it_final-t1 = '@0A@' .
          MODIFY it_final INDEX lv_index TRANSPORTING t1.
          CONTINUE.
        ENDIF.
        IF it_final2-t1 = '@09@'.
          it_final-t1 = '@09@'.
          MODIFY it_final INDEX lv_index TRANSPORTING t1.
          change = 'Y'.
          CONTINUE.
        ENDIF.
        IF it_final2-t1 = '@08@'.
          it_final-t1 = '@08@' .
          IF change IS INITIAL.
            MODIFY it_final INDEX lv_index TRANSPORTING t1.
          ENDIF.
          CONTINUE.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
it_final3[] = it_final[].
CLEAR: lv_index2.
CLEAR change.
LOOP AT it_final3 WHERE stufe = 2.
    READ TABLE e_wbs WITH KEY wbs_element = it_final3-posid.
    CHECK sy-subrc = 0.
    READ TABLE it_final WITH KEY stufe = 1
                                 posid = e_wbs-up.
    IF sy-subrc = 0.
      CHECK it_final-t1 <> '@0A@'.
      lv_index = sy-tabix.
      IF lv_index2 <> lv_index.
        CLEAR: change.
        lv_index2 = lv_index.
      ENDIF.
      IF   it_final3-t1 = '@0A@'.
        it_final-t1 = '@0A@' .
        MODIFY it_final INDEX lv_index TRANSPORTING t1.
        DELETE it_final3.   " WHERE stufe = 2.
        CONTINUE.
      ENDIF.
      IF it_final3-t1 = '@09@'.
        it_final-t1 = '@09@'.
        MODIFY it_final INDEX lv_index TRANSPORTING t1.
        change = 'Y'.
        CONTINUE.
      ENDIF.
      IF it_final3-t1 = '@08@'.
        it_final-t1 = '@08@' .
        IF change IS INITIAL.
          MODIFY it_final INDEX lv_index TRANSPORTING t1.
        ENDIF.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
Building hierarchy table ***************
LOOP AT it_final.
    IF it_final-stufe = '0'.
      node_tab-type = 'T'.
      node_tab-name = 'Project'.
      node_tab-tlevel = '01'.
      node_tab-nlength = '8'.
      node_tab-color = '4'.
      node_tab-text = it_final-post1.
      node_tab-tlength ='20'.
      node_tab-tcolor = 5.
      APPEND node_tab.
      it_final_hsk-node = node_tab.
      APPEND it_final_hsk. CLEAR it_final_hsk.
      CLEAR node_tab.
    ELSEIF it_final-stufe = '1'.
      node_tab-type = 'P'.
      node_tab-name = 'Project'.
      node_tab-tlevel = '02'.
      node_tab-nlength = '10'.
      node_tab-color = '1'.
      node_tab-kind2 = 'I'.
      node_tab-text3+0(4) = it_final-t1.
      node_tab-tlength3 = '5'.
      node_tab-tcolor3 = 1.
      node_tab-kind3 = ' '.
      node_tab-text4 = it_final-posid.
      node_tab-tlength4 ='20'.
      node_tab-tcolor4 = 3.
Code added for plant name
      CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
        EXPORTING
          input = it_final-posid
        IMPORTING
          output = it_final-posid.
      READ TABLE it_proj WITH KEY pspid = it_final-posid.
      CHECK sy-subrc = 0.
      READ TABLE it_t001w WITH KEY werks = it_proj-werks.
      CHECK sy-subrc = 0.
Code End.
      node_tab-kind4 = ' '.
      node_tab-text5 = it_t001w-name1.   " Plant Name
      node_tab-tlength5 ='25'.
      node_tab-tcolor5 = 4.
      node_tab-kind5 = ' '.
      node_tab-text6 = it_proj-stort.
      node_tab-tlength6 ='15'.
      node_tab-tcolor6 = 4.
      node_tab-kind6 = ' '.
      node_tab-text7 = it_final-post1.
      node_tab-tlength7 ='25'.
      node_tab-tcolor7 = 4.
      APPEND node_tab.
      it_final_hsk-node = node_tab.
      APPEND it_final_hsk. CLEAR it_final.
      CLEAR node_tab.
    ELSEIF it_final-stufe = '2'.
      node_tab-type = 'P'.
      node_tab-name = 'Gate Id'.
      node_tab-tlevel = '03'.
      node_tab-nlength = '10'.
      node_tab-color = '1'.
      node_tab-kind2 = 'I'.
      node_tab-text3+0(4) = it_final-t1.
      node_tab-tlength3 = '5'.
      node_tab-tcolor3 = 1.
      node_tab-kind3 = ' '.
      node_tab-text4 = it_final-posid.
      node_tab-tlength4 ='20'.
      node_tab-tcolor4 = 3.
      node_tab-kind4 = ' '.
      node_tab-text5 = it_final-post1.
      node_tab-tlength5 ='25'.
      node_tab-tcolor5 = 4.
      APPEND node_tab.
      it_final_hsk-node = node_tab.
      APPEND it_final_hsk.
      CLEAR it_final.
      CLEAR node_tab.
    ELSEIF it_final-stufe = '3' AND it_final-ltxa1 EQ space.
      node_tab-type = 'P'.
      node_tab-name = 'Component'.
      node_tab-tlevel = '04'.
      node_tab-nlength = '11'.
      node_tab-color = '1'.
      node_tab-kind2 = 'I'.
      node_tab-text3+0(4) = it_final-t1.
      node_tab-tlength3 = '5'.
      node_tab-tcolor3 = 1.
      node_tab-kind3 = ' '.
      node_tab-text4 = it_final-posid.
      node_tab-tlength4 ='25'.
      node_tab-tcolor4 = 3.
      node_tab-kind4 = ' '.
      node_tab-text5 = it_final-post1.
      node_tab-tlength5 ='25'.
      node_tab-tcolor5 = 4.
Code added for start date and end date for component level.
      SELECT SINGLE pstrm petrf INTO (v_pstrm, v_petrf)
           FROM prte WHERE posnr = it_final-pspnr.
      it_final-fsavd = v_pstrm.
      it_final-fssad = v_petrf.
      MODIFY it_final INDEX sy-tabix.
      WRITE it_final-fsavd TO date_mask MM/DD/YYYY.
      node_tab-tpos1 = '0'.
      node_tab-kind5 = ' '.
      node_tab-text6 = date_mask.
      node_tab-tlength6 ='10'.
      node_tab-tcolor6 = 3.
      CLEAR date_mask.
      WRITE it_final-fssad TO date_mask MM/DD/YYYY.
      node_tab-tpos1 = '0'.
      node_tab-kind6 = ' '.
      node_tab-text7 = date_mask.
      node_tab-tlength7 ='10'.
      node_tab-tcolor7 = 3.
      CLEAR date_mask.
      APPEND node_tab.
      it_final_hsk-node = node_tab.
      APPEND it_final_hsk.
      CLEAR it_final_hsk.
      CLEAR node_tab.
    ELSEIF it_final-ltxa1 IS NOT INITIAL.
      node_tab-type = 'P'.
      node_tab-name = 'Element'.
      node_tab-tlevel = '05'.
      node_tab-nlength = '11'.
      node_tab-color = '1'.
      node_tab-kind = 'I'.
      node_tab-text1+0(4) = it_final-t1.
      node_tab-tlength1 = '5'.
      node_tab-tcolor1 = 1.
      node_tab-kind2 = 'I'.
      node_tab-text3+0(4) = it_final-t2.
      node_tab-tlength3 = '5'.
      node_tab-tcolor3 = 1.
      node_tab-kind3 = ' '.
      node_tab-text4 = it_final-ltxa1.
      node_tab-tlength4 ='45'.
      node_tab-tcolor4 = 3.
      node_tab-kind4 = ' '.
      node_tab-text5 = it_final-txt04.
      node_tab-tlength5 ='10'.
      node_tab-tcolor5 = 3.
      WRITE it_final-fsavd TO date_mask .
      node_tab-kind5 = ' '.
      node_tab-text6 = date_mask.
      node_tab-tlength6 ='10'.
      node_tab-tcolor6 = 3.
      CLEAR date_mask.
      WRITE it_final-fssad TO date_mask.
      node_tab-tpos1 = '0'.
      node_tab-kind6 = ' '.
      node_tab-text7 = date_mask.
      node_tab-tlength7 ='10'.
      node_tab-tcolor7 = 3.
      CLEAR date_mask.
      APPEND node_tab.
      it_final_hsk-node = node_tab.
      APPEND it_final_hsk.
      CLEAR it_final_hsk.
      CLEAR node_tab.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
    TABLES
      nodetab = it_final_hsk.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
    EXPORTING
      callback_program      = i_repid
      callback_user_command = 'USER_COMMAND'
      callback_gui_status   = 'ZLD_TREE_N'
      screen_start_column   = 0
      use_control           = 'L'.
ENDFORM.                    " hierarchy
*&      Form MYGUI
      text
     -->EX_TAB     text
FORM zld_tree_n.
SET PF-STATUS 'ZLD_TREE_N'.
ENDFORM.                    "zld_tree.
**&      Form user_command
    Code for REFRESH button
FORM user_command TABLES   node STRUCTURE seucomm
                           USING ucomm CHANGING exit
                                    list_refresh.
CASE ucomm.
    WHEN 'REFR' .
      CLEAR it_final.
      REFRESH it_final_hsk.
      REFRESH it_final.
      PERFORM getdata.
      CLEAR it_final.
      PERFORM hierarchy.
    WHEN 'BACK1'.
      LEAVE TO TRANSACTION 'ZCN41_N'.
ENDCASE.
ENDFORM.                    "user_command
include.....
*& Include           ZDATA_DECLARE
*& Tables used for the report
TABLES: proj, prps, aufk, afvc, jest, tj30t, afvv, prte.
*& Type Pools used
TYPE-POOLS: slis, icon, fibs, stree.
*& Class & Data defination
CLASS DEFINATION
CLASS cl_gui_resources DEFINITION LOAD.
DATA DECLARATION
DATA: g_lights_name TYPE lvc_cifnm VALUE 'LIGHT',
      pspid LIKE proj-pspid,
      l_pos TYPE i VALUE 1,
      gs_layout TYPE slis_layout_alv,
      color TYPE zcn41_color_n-color.
DATA : cnt VALUE 'X'.
DATA : i_repid TYPE sy-repid.
DATA : t_node TYPE snodetext.
DATA : node_tab LIKE t_node OCCURS 0 WITH HEADER LINE.
DATA : gv_diff TYPE p, stort LIKE proj-stort.
CONSTANTS: st_formname_top_of_page TYPE slis_formname
                              VALUE 'TOP_OF_PAGE-ALV'.
*& Internal Table Declarations
DATA it_proj   TYPE STANDARD TABLE OF proj WITH HEADER LINE.
DATA it_prps   TYPE STANDARD TABLE OF prps WITH HEADER LINE.
DATA it_afvc   TYPE STANDARD TABLE OF afvc WITH HEADER LINE.
DATA it_tj30t TYPE STANDARD TABLE OF tj30t WITH HEADER LINE.
DATA it_afvv   TYPE STANDARD TABLE OF afvv WITH HEADER LINE.
DATA it_jcds   TYPE STANDARD TABLE OF jcds WITH HEADER LINE.
DATA it_t001w TYPE STANDARD TABLE OF t001w WITH HEADER LINE.
DATA: BEGIN OF it_final OCCURS 0,
          stufe LIKE prps-stufe,
          pspnr LIKE prps-pspnr,
          t1      TYPE icon-id,
          t2      TYPE icon-id,
          node    LIKE node_tab,
          posid LIKE prps-posid,
          post1 LIKE prps-post1,
          ltxa1 LIKE afvc-ltxa1,
          txt04(20),
          objnr LIKE afvc-objnr,
          vornr LIKE afvc-vornr,
          aufpl LIKE afvc-aufpl,
          aplzl LIKE afvc-aplzl,
          fsavd LIKE afvv-fsavd, "Ear. Start date
          fssad LIKE afvv-fssad, "Ear. finish date
          werks LIKE t001w-name1,     " added after update
          stort LIKE proj-stort,     " added after update
     END OF it_final.
DATA: BEGIN OF it_hsk OCCURS 0,
        t2      TYPE icon-id,
        t1      TYPE icon-id,
        posid LIKE prps-posid,
        post1 LIKE prps-post1,
        objnr LIKE afvc-objnr,
        stufe LIKE prps-stufe,
      END OF it_hsk.
DATA: BEGIN OF it_new OCCURS 0,
        objnr LIKE afvc-objnr,
        fsavd LIKE afvv-fsavd,
        fssad LIKE afvv-fssad,
        udate LIKE jcds-udate,
        t2(10),
      END OF it_new.
CLEAR : node_tab, node_tab[].
DATA : entval TYPE prps-posid.
DATA : ct_fieldcat TYPE slis_t_fieldcat_alv.
DATA : BEGIN OF it_final_hsk OCCURS 0,
          node LIKE node_tab,
        END OF it_final_hsk.
DATA : project LIKE bapipr-project_definition,
        e_project_definition LIKE bapi_project_definition_ex.
DATA : e_wbs_hierarchie_table TYPE STANDARD TABLE OF bapi_wbs_hierarchie
        WITH HEADER LINE.
DATA : e_wbs LIKE e_wbs_hierarchie_table OCCURS 0 WITH HEADER LINE.
DATA: v_pstrm LIKE prte-pstrm, v_petrf LIKE prte-petrf,
       v_posnr LIKE prps-pspnr.
*& Selection Screen of the report
SELECTION-SCREEN BEGIN OF BLOCK pms WITH FRAME TITLE text-001.
SELECT-OPTIONS so_posid FOR proj-pspid OBLIGATORY.
SELECT-OPTIONS so_plant FOR proj-werks.
SELECT-OPTIONS so_loc FOR proj-stort.
SELECT-OPTIONS so_date FOR sy-datum.
SELECTION-SCREEN END OF BLOCK pms.
*AT SELECTION-SCREEN .
READ TABLE it_proj WITH KEY pspid = so_posid.
IF sy-subrc <> 0.
   MESSAGE 'Project Name dose not exist' TYPE 'E.
ENDIF.
include..
*& Include           ZSUBR
*&      Form date_difference
      text
--> p1        text
<-- p2        text
FORM date_difference .
CALL FUNCTION 'ZDATETIME_DIFFERENCE_N'
    EXPORTING
      date1                  = it_final-fsavd
      time1                  = '000000'
      date2                  = it_final-fssad
      time2                  = '000000'
   IMPORTING
     datediff               = gv_diff
   EXCEPTIONS
     INVALID_DATETIME       = 1
     OTHERS                 = 2
IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " date_difference
*&      Form date_monitor
      text
--> p1        text
<-- p2        text
T1 for more than 1 days activities
Subroutines result out the T1 on basis of 80% of activity ( Green )
or if 20 % reamined. ( Yellow )
FORM date_monitor .
DATA: date TYPE string,
        temp_date TYPE string,
        lv_date LIKE afvv-fsavd,
        lv_date_final LIKE afvv-fsavd,
        lv_days LIKE bseg-dtws1 VALUE 0.
CONSTANTS: con TYPE f VALUE '0.8'.
*lv_date = it_new-fsavd.
IF gv_diff EQ 2.
    lv_days = 1.
    CALL FUNCTION 'ZCALC_DATE_N'
      EXPORTING
        date      = it_final-fsavd
        days      = lv_days
        months    = '00'
        sign      = '+'
        years     = '00'
      IMPORTING
        calc_date = lv_date_final.
    IF sy-datum LE lv_date_final.
      it_final-t1 = '@08@'.
    ELSEIF sy-datum GT lv_date_final AND
           sy-datum EQ it_final-fssad.
      it_final-t1 = '@09@'.
    ENDIF.
ELSEIF gv_diff > 2.
    lv_days = con * gv_diff.
    CALL FUNCTION 'ZCALC_DATE_N'
      EXPORTING
        date      = lv_date
        days      = lv_days
        months    = '00'
        sign      = '+'
        years     = '00'
      IMPORTING
        calc_date = lv_date_final.
    IF sy-datum LE lv_date_final.
      it_final-t1 = '@08@'.
    ELSEIF sy-datum GT lv_date_final AND
           sy-datum EQ it_final-fssad.
      it_final-t1 = '@09@'.
    ENDIF.
ENDIF.
ENDFORM.                    " date_monitor
this code will give you exact out put as you required from bootom to top functinality....with status....

Parent / Child Groups in Portal with LDAP

Heya,
we are using EP 7 on SP 10 (NW 7), for User Authentication we use the UME with a configured (writable) LDAP
Server as backend with a flat hierarchie. We have a Federated Portal Landscape with
3 Portals connected to one "main" portal and using Remote Role Assignement on the main portal for
our right managenemt.
Remote Roles which are added to Groups are working fine, but as soon as we try to use
the parent/child group functionality we are facing the problem that the user who logs on
has no access to anything in this group.
According to http://help.sap.com/saphelp_nw04s/helpdata/en/af/0cfc3f09c2c442e10000000a1550b0/frameset.htm
the only restriction for the use of child / parent groups is that:
"If user management is set up with write access to an LDAP directory, the following restriction applies:
When assigning members to a group that is stored in the LDAP directory, you can only assign users or
groups that are also stored in the LDAP directory. You cannot assign users or groups from the database
to groups from the LDAP directory. "
We fullfill the above condition (everything is LDAP based) - sooo: Any Hints for me / Someone facing
the same problem.
Thanks,
Marco

Hi Murali,
User Configuration
A particular company has the following setup:
●      Two roles: External and Internal
●      The role Internal contains users who also belong to two user groups: N.America and Asia
●      User A belongs to both the role Internal and the user group N.America
●      User B belongs to both the role Internal and the user group Asia
●      User C belongs to the role External
Conditions Defined in Portal Display Rules
1. If Group = N.America
   Then Portal Desktop = Orange Flavor
2. If Role = Internal
   Then Portal Desktop = Green Flavor
3. If Group = Asia
   Then Portal Desktop = Blue Flavor
4. If Role = External
   Then Portal Desktop = Red Flavor
Note that user A matches conditions 1 and 2; (ii) user B matches conditions 2 and 3; and (iii) user C matches condition 4.
Results
According to the list of priorities, these are the results:
●      User A receives portal desktop "Orange Flavor" (according to condition 1 which has priority over rule 2)
●      User B receives portal desktop "Green Flavor" (according to condition 2 which has priority over rule 3)
●      User C receives portal desktop "Red Flavor" (according to condition 4)
still any help on portal disktop rules to can see this link http://help.sap.com/saphelp_nw70/helpdata/EN/4b/29cf122f414721964269e1b675d62c/frameset.htm
if helpful don't to give points
thanks
best regards
ep

To Kill Parent / Child process

Hi ,
I'm facing problem with killing a process. I'm using "kill -9 <ppid>"(ppid - parent process id) command to kill the process, this command kills the parent process but the associated child process is not killed.
I'm new to this Solaris, and my question is
Do killing the Parent process internally kills the child process too? if the child process is taking time, how to ensure that the child process is killed before killing the Parent process.
Thanks in advance for your response.

Do killing the Parent process internally kills the child process too?Hello.
If the parent process ends (does not care if regular exit or kill) it sends a signal to all its child processes. This is equal to "kill -xxx <child_pid>" (sorry that I do not know the number "xxx" by now).
By default this signal will kill the child process but it is a signal that can be caught or ignored. This means the child process can tell the operating system that it does not wish to be killed when the parent is killed, the parent exits or an explicit "kill -xxx" is sent. (Only two signals cannot be caught or ignored: SIGKILL and one that pauses the process.)
Martin

Populate list from recordset on Parent/Child form

We have a parent/child form and want to populate several lists from recordsets. We can populate the child canvas by calling a procedure from the WHEN NEW FORM INSTANCE trigger but the same code fails when trying to populate a list on the Parent canvas. If I move the code to a PRE-BLOCK trigger on the parent block, then it works. I just kept moving the code until I found something that works. Can anyone tell me why it wouldn't work from the WHEN NEW FORM INSTANCE trigger? Is PRE-BLOCK the correct place?

WHEN-NEW-FORM-INSTANCE trigger
Add_Orgs_Lists('HR_PERSONS.OFFICE_SYMBOL');
PROGRAM UNIT
PROCEDURE Add_Orgs_Lists (list_name VARCHAR2) is list_id ITEM;
     col_name VARCHAR2(80) := SUBSTR(list_name, INSTR(list_name, '.')+1);
     sql_stat VARCHAR2(2000);
     BEGIN
     --Find ID for list item.
          list_id := FIND_ITEM(list_name);
          IF ID_NULL(list_ID) THEN
               MESSAGE('List Item ' ||list_name|| ' does not exist.');
               RAISE FORM_TRIGGER_FAILURE;
          END IF;
     --Build the SQL statement.
     --     message('In Get_Org');
     sql_stat := 'SELECT Distinct Org_Name, Org_Name FROM HR_Organizations
     ORDER BY 1 ASC';
     Populate_the_List(list_id, sql_stat);
          EXCEPTION
               WHEN OTHERS THEN
                    MESSAGE('Internal error occurred in Add_Orgs_List.');
                    RAISE FORM_TRIGGER_FAILURE;
END Add_Orgs_Lists;
PROCEDURE Populate_the_List (list_id ITEM,
                                                       sql_stat VARCHAR2) is
     group_id RecordGroup;
     outcome NUMBER;
     --List_Elements VARCHAR2(40);
BEGIN
          --message('In Populate_the...');
--Create temporary record group.
group_id := CREATE_GROUP_FROM_QUERY('List_Elements', sql_stat);
IF ID_NULL(group_id) THEN
     MESSAGE('Record Group could not be created in Populate_the_List.');
     RAISE FORM_TRIGGER_FAILURE;
END IF;
--Populate record group.
     outcome := POPULATE_GROUP(group_id);
     IF outcome <> 0 THEN
          MESSAGE('Record Group could not be populated in Populate_the_List.');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
--Populate list item
     POPULATE_LIST(list_id, group_id);
--Destroy the temporary record group to release resources
     DELETE_GROUP(group_id);
EXCEPTION
     WHEN OTHERS THEN
     MESSAGE('Internal error occured in Popluate_the_List.');
     RAISE FORM_TRIGGER_FAILURE;
END Populate_the_List;
The error is FRM-41337 Cannot populate the list from record group. It happens when we open the form. We are using the same code to populate the lists on the child form (except the SQL statement is different) and it works correctly.
I appreciate your help.

Query Help with Parent, Child, Child's Child

Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advance

Hi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support

Problem with saving Parent - Child View Objects in ADF 11g.

Hi Every one,
I have a requirment, something like I will be displaying some data on my jsff screen based on one Transient View Object. Whenever user clicks on Save button, I have to do following steps in my AMImpl.
-> Preapre dynamically Parent View Object Rows based on some logic
-> Prepare dynamically Child View object Rows and invoke insertRow method on respective child view object.
When I say commit() First Parent ViewObject data need to be saved and then Child View object data has to be saved. I am having Parent - Child Key relation ship btw these two ViewObjects. Some how I am populating the Parent Primary key in the Child View Object. Please suggest me If there is any other alternative to this.
Thanks

I got the solution, Enabling the check box option for Master - Detail Entity association (CompositionAssociation -> Cascade Update Key Attributes) resolved the issue.
Thanks

Does table STPOX contain parent-child relationship between components

Hello
I need to get a list of components of SO BOM.
FM CS_BOM_EXPL_KND_V1 exports an output table STPOX.
Does this table contain parent-child relationship between components? If yes , can somebody tell me which fields contain parent child id.
thanks

Hi,
STPOX is not a table, it is a structure & hence there is no storing of data in a structure. The table which stores this info is STPO.
To get the link you can refer to STPO-STLNR & pass this value to MAST-STLNR, this way you can link the child with its parent.
Regards,
Vivek

Internal Reconciliation rules for the Business Partner

Version: (Please provide the current version)
SBO 2005-A PL11
Description of requirements: (Please provide a detailed description)
Employees are considered as Supplier for us
We have defined two control account
One to follow the Employee Advance payment : 15130020
the other to follow the Employee Expense voucher : 37100010
Step 1 :
We create one Down Payment Request for the Employee
Step 2 :
We paid the Down Payment Request (amount : 2000) using the Outgoing Payment :
Posting Scheme generated :
(C) 11100241 Petty Cash Account
(D) 15130020 Employee Control Account for Down Payment
Step 3 :
We enter the Expense Voucher for this employee (Amount : 1200)
Posting Scheme
(D) 6XXXXXXX Profit & Loss GL Account
(C) 37100010 Employee Control Account for Expenses
Step 4 :
Due to the fact that the amount of the advance is greater than the amount of the expense voucher, the employee have to reimburse the difference.
We use the menu incoming payment
The different steps follow up are :
     Select Vendor as type of BP for the incoming payment
     Select the invoice to be paid for the vendor, and tick the box "Payment on Advance" to take in account the amount already paid in the DPR
     Do the reimbursement of 800
Posting Scheme :
(C) 37100010 Employee Control Account for Expenses
(D) 11100241 Petty Cash Account
The problem is when we try to do the internal reconciliation we could not see in the same time for the Employee the 2 reconciliation accounts.
How could we do ?
Valid as of: (Date that this legal requirement is applicable)
Business needs: (Please describe the impact on your business, if the functionality is not realized)
We are not able to clear the advance done for the employee and the reimbursement done by the employee.
Due to this fact, we retrieve if we have one other invoice to paid the DPR already paid and take in account in a previous reimbursement which generates damage in the system.
Examples: (Please describe a typical example, how the functionality should work.)
See upper
Current Workaround: (Please describe the workarounds you are using at the moment)
Use the same Control accounts for the Expense Voucher and the Advance payment
Proposed solution: (Please suggest how the new functionality should work)
Permit for the Internal reconciliation process for One Employee to retrieve the data link on the different control account regarding one employee / Supplier

Hello,
I was just wondering whether you have checked the case in 2007 A version in which brand new concept of internal reconciliation was delivered for customers.
Please try to avoid so long postings. Create rather an attachment with longer description of the issue/case. This helps to increase transparency in the discussions.
Peter Dominik
SAP
B1 Product Definition

How to allow Sharepoint users to login from multiple parent-child accounts?

Our client has mutliple AD domains and wants to allow people which have multiple AD accounts in multiple domains to login as THE SAME user:
- only primary account will be visible in search
- there will be only one user profile with all informations gathered from all sub accounts
- permissions for the sub account will be in sync with parent account
- task generated for parent will be visible for child accouns too etc
- ad admin can link the account together in the Active Directory - this link is permament (even if we move users to another OU) and ad admin can define which account is primary and secondary (parent/child)
How we can implement this in Sharepoint 2010 Std Server?

Everything in SharePoint keys of the Security Identifier (SID) of a user. Each user in a domain has a unique SID, so there is no way to have multiple users recognized in SharePoint as the same user.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Getting parent-child data from a single column in a table

Hi,
I have a parent-child data in a column.
Eg:
0
00
01
010
011
1
10
11
These values are present in the single column itself. My need is to get the parent values for the given child value.
For eg: If I am giving the input as 011, the query should return all its parents, i.e. 01 and 0
Could you please give me any inputs on this?
Thanks,
GV

Frank Kulash wrote:
Assuming that each child's id is formed by adding exactly one character to the end of its parent's id:
SELECT     id
FROM     table_x
START WITH     id          = :target_id
CONNECT BY     PRIOR id     LIKE id || '_';
Small tweak to yours Frank if it's just the parents that need identifying...
SQL> ed
Wrote file afiedt.buf
1 with t as (select '0' as x from dual union all
2             select '00' from dual union all
3             select '01' from dual union all
4             select '010' from dual union all
5             select '011' from dual union all
6             select '1' from dual union all
7             select '10' from dual union all
8             select '11' from dual)
9 -- end of test data
10 SELECT     x
11 FROM       t, (select '&required' as req from dual) req
12 WHERE x != req.req
13 START WITH x = req.req
14* CONNECT BY PRIOR x LIKE x || '_'
SQL> /
Enter value for required: 011
old 11: FROM   t, (select '&required' as req from dual) req
new 11: FROM   t, (select '011' as req from dual) req
X
01
0
SQL> /
Enter value for required: 11
old 11: FROM   t, (select '&required' as req from dual) req
new 11: FROM   t, (select '11' as req from dual) req
X
1
SQL>

No data for Parent-child hierarchy column in Pivot table view

Hi all,
I used OBIEE 11.1.1.6.2 Version.
I drag one Parent-child hierarchy column and one measure and show result with a pivot table view.
But when I click "+" icon to show detail level data,
It messaged that: "*the layout of this view combined with the data,selections,drills,or prompt values chosen resulted in no data*."
But it can show every-level data when I used table view.
It was so strange..
Did anybody meet this before?
Thanks in advance.
regards,
Anne

Hi,
Yes, I have the same problem with pivot table for hierarchy dimension.
If you use a normal table (not pivot) it seem to work. Unfortunatley with restrictions as normal table view have.
Same problem still exist in 11.1.1.6.5
I have logged a SR to Oracle about this.

Parent Child Hierarchy Issue in OBIEE 11g

Hi All,
I am in OBIEE 11G v6. I have a sales fact table where the grain is one sale. So I have one row for every sale done.
Now I have a ragged employee hierarchy like this with David at the root node.
David >>Richard>>Sean
David >>James
Also, I have a role dimension which gives me what role each employee has performed on a sale. Only one employee can be associated with one sale. This is the way Roles have been asssigned
David = Manager
Richard = Off1
Sean = Off2
James = Off2
Both Sean and James can have same Roles. Now I have created a parent child hierarchy for my employee dimension and the closure table. Defined the member key, ancestor key relationship in the parent child setting etc.
Now in the report when I pull the parent child hierarchy and the sales_amount in the report, it comes out perfect with all the ragged hierarchy resolved. But the issue comes when I try to limit the report on Role = Off2. It gives me an error saying " The layout of this view combined with the data, selection , drills resulted in no data. Undo drill and view prompt values". Basically what i want is to be able to select any role type and then my hierarchy should be adjusted to show me that data. Like when I select Off2, I want to see David at the Top level and Sean and James under him because they are both Off 2 and David is their manager.
Is that possbile? Also, am I getting this error because when I select Off2 though it gets Sean and James but since David is not Off2, I don't get the data?
I hope I was able to explain the issue, any help on this would be greatly appreciated.
Thanks
Ronny

So basically this means that if I build a parent child hierarchy on table A having the stucture like
--David (Manager)
-----James (Off1)
--------Bill (Off2)
and in my sales fact table for let's say today, I have only rows for Bill (Off2) because he is the only officer who did the sales today. Now when I will join my fact table to parent child hierarchy table A I will NOT get any data ? because there is no James who is the parent of Bill. So obiee need to have parent pulled off in the data (ANCESTOR) to be able to roll up the child.(IS_LEAF = 1)
I testes this and if my data only contains only rows for Bill (or I limit on ROLE = Off2) then it won't show the hierarchy. The query which OBIEE fires is to look for either ANCESTOR_KEY = NULL OR (DISTANCE = 1 AND ANCESTOR KEY IN (Bill). Therefore it doesn't I am wondering then what is the use of builiding the parent child hierarchy when we need to pull in all the ancestors (like in this case James for bill and David for james) because in real scenarios there can be cases wherein we would want to filter the data based on other dimensions to which the parent child hierarchy joins ?

OBIEE 11g - Navigation in Parent Child Hiearchy not working

Hi All,
I have a employee parent child hierarchy and I want to show revenue for each employee in the report. I have modeled my revenue as a measure like case 4 shown in the following link
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
So for example this is my report ,
--David (30)
---Sandra (15)
-----Joe (10)
Joe'e revenue is 10, Sandra's is 5 (showing her 5 Joe's revenue) and David's is 5 (showing his 5 Sandra's revenue)
Issue :
Now what I want is to provide action link on the revenue column so that when user would click on revenue for any employee it would direct them to a detail report showing the bifurcation.
For ex, I want that when user click on 15 which is Sandra's revenue, he would be redirected to a detailed report for Sandra and similary for Joe and David
MY ISSUE IS that the navigation is NOT working for sandra and Joe. It is only working for David (who is the ancestor of sandra and Joe). When I click on 15 to see sandra's detail report, it doesn't do anything and in the bottom left corner of the browser status bar below I see an ERROR saying
(same for Joe but David work's fine)
Message: 'getLevelInfo(...)' is null or not an object
Line: 1
Char: 11142
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/answers/selectionsmodel.js
Why is that happening? Is that because I have modeled the revenue as an measure and not attribute. Is navigation not possible in this case?
Anybody has any solution or workaround for this, it will be highly appreciated.
Thanks,
Ronny

Ok, so let me explain this in detail and give the structure of my tables and the data,
There are three tables.
1.Parent Child relationship table - pctable
2.Closure table which OBIEE creates through a script - reltable
3.Fact table which contains the revenue - facttable
This is the data
pctable
personid | managerid
David | NULL
Sandra| David
Joe|Sandra
reltable
memberkey | ancestorkey |distance |is_leaf
David|NULL|NULL|0
David|David|0|0
Sandra|Sandra|0|0
Joe|Joe|0|0
Sandra|David|1|0
Joe|Sandra|1|1
Joe|David|2|1
facttable
personid|revenue
David|5
Sandra|5
Joe|10
and my joins conditions are, I join pctable to reltable and then reltable is joined to facttable like this.
pctable.personid = reltable.ancestorkey
reltable.memberkey = facttable.personid
and then in the report, when I pull up the pchierarchy build from pctable and revenue , I get as below and like I said, when I click on Sandra to see the revenue she contributes, I am not able to navigate. Can you let me know what modifications needs to be done?
---David(20)
----Sandra(15)
------Joe(10)

Parent Child Internal Reconciliation

Similar Messages

Maybe you are looking for