Parser - "Unexpected value" error

Hi all,
I have a file to ABAP proxy scenario. The file is an XML file. In SXMB_MONI, I am getting the following error at "Call Adapter" step -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code>
<SAP:P1>Main/@versionMajor</SAP:P1>
<SAP:P2>002</SAP:P2>
<SAP:P3>003</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XML tag Main/@versionMajor has incorrect value 002; expected value is 003</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I verified that the source XML file has the value 003 for versionMajor attribute. So Header section of the message also shows the value 003.
Does anyone know what might be the reason for this ?
Regards,
Shankar

Hi,
Main/@versionMajor is XI message protocol version. Example: For the XI 3.0 message protocol VERSION_MAJOR = 3 and VERSION_MINOR = 0.
So try to pass these message header fields during a mapping.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/frameset.htm
When you think, the message tries to call an inbound proxy in XI, you should check SXMB_ADM if the system is maintained as XI and not as application system.
Thanks
Swarup
Edited by: Swarup Sawant on May 26, 2008 10:36 AM

Similar Messages

Unexpected value matrix(1,0,0,1,NaN,NaN) parsing transform attribute Anychart

We are running Oracle Apex 4.2 and whenever a user creates a new session, the chart on the home page shows the No Data Found Message. However, when you refresh or submit the page, the correct data and rendering appears. On the initial page load, the only message in the Javascript Console is a warning "Unexpected value matrix(1,0,0,1,NaN,NaN) parsing transform".
We attempted an on load refresh dynamic action but that does not work as well.
What could this be?
Thanks.

The error:
gethydrosdi.xsl<Line 22, Column 40>:
XML-0137: (Error) Attribute 'select' used but not declared.is caused by trying to parse your XSLT stylesheet using an XML parser which has been set to use DTD validation.
The follow example illustrates a program that causes your error to appear. Given the file 'foo.dtd':
<!ELEMENT foo EMPTY>and the file 'foo.xml':
<?xml version="1.0"?>
<!DOCTYPE foo SYSTEM "foo.dtd">
<foo/>and the stylesheet 'foo.xsl':
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>The following Java program illustrates producing your error:
import oracle.xml.parser.v2.*;
import java.io.*;
import org.w3c.dom.*;
public class ex {
public static void main(String[] a) throws Throwable {
DOMParser d = new DOMParser();
d.setValidationMode(true);
d.parseDTD(new FileReader("foo.dtd"),"foo");
d.setDoctype(d.getDoctype());
d.parse(new FileReader("foo.xml"));
d.parse(new FileReader("foo.xsl"));
XMLDocument doc = (XMLDocument)d.getDocument();
doc.print(System.out);
}If you run this with the command:
java exfrom the directory where foo.xml, foo.dtd, and foo.xsl are, you'll get the error:
Element 'xsl:stylesheet' used but not declared.The following code illustrates the way to avoid the error, by setting validation mode to false before trying to parse the stylesheet:
import oracle.xml.parser.v2.*;
import java.io.*;
import org.w3c.dom.*;
public class ex {
public static void main(String[] a) throws Throwable {
DOMParser d = new DOMParser();
d.setValidationMode(true);
d.parseDTD(new FileReader("foo.dtd"),"foo");
d.setDoctype(d.getDoctype());
d.parse(new FileReader("foo.xml"));
// Set the validation mode to false before using
// the same instance of a DOMParser to parse the stylesheet.
d.setValidationMode(false);
d.parse(new FileReader("foo.xsl"));
XMLDocument doc = (XMLDocument)d.getDocument();
doc.print(System.out);
}null

Getting the following error while parsing the values usng xml parser

Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
     IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
     THEN
     FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
     XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
     -- PARSE INPUT FILE
     FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
     XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
     -- GET DOCUMENT
     DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
     LOAD_SUPP(doc);
     ELSE
     DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
     END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
     ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
Ajesh

Besides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers

Unexpected "numeric or value error" when using CAST COLLECT

I am having trouble with string aggregation using CAST / COLLECT and the to_string function described on various sites around the net including AskTom and http://www.oracle-developer.net/display.php?id=306.
I am getting "numeric or value error: character string buffer too small" but cannot see which limit I am exceeding.
I have put together a simple test case to highlight this problem which I have pasted below.
The error does not seem to be coming from the to_string function itself (else I expect we would see "TO_STRING raised an exception" in the returned error message).
Any thoughts much appreciated,
Thanks, Andy
SQL*Plus: Release 10.1.0.4.2 - Production on Tue Jun 15 09:56:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CREATE TYPE table_of_varchar2 AS TABLE OF VARCHAR2(32000);
2 /
Type created.
SQL> CREATE OR REPLACE FUNCTION to_string (
2              nt_in IN   table_of_varchar2
3      ,       delimiter_in    IN VARCHAR2 DEFAULT ',')
4      RETURN VARCHAR2
5      IS
6          l_idx   PLS_INTEGER;
7          l_str   VARCHAR2(32767);
8          l_dlm   VARCHAR2(10);
9
10      BEGIN
11
12          l_idx := nt_in.FIRST;
13          WHILE l_idx IS NOT NULL LOOP
14              l_str := l_str || l_dlm || nt_in(l_idx);
15              l_dlm := delimiter_in;
16              l_idx := nt_in.NEXT(l_idx);
17          END LOOP;
18
19          RETURN l_str;
20      EXCEPTION
21          WHEN OTHERS THEN
22              raise_application_error(-20000
23                                  ,   'TO_STRING raised an exception. '||
24                                      'The reported error was: '||sqlerrm);
25     END to_string;
26 /
Function created.
SQL> DECLARE
2      l_longstring varchar2(32000);
3 BEGIN
4      SELECT to_string(CAST( COLLECT( substr(object_name,1,1) ) AS table_of_varchar2 ) )
5      INTO    l_longstring
6      FROM    all_objects
7      WHERE   rownum < 2001;
8
9 EXCEPTION
10      WHEN OTHERS THEN
11          raise_application_error(-20001
12                ,   'The anonymous block raised an exception: '||
13                    sqlerrm||'. '||DBMS_UTILITY.format_error_backtrace);
14 END;
15 /
PL/SQL procedure successfully completed.
SQL> DECLARE
2      l_longstring varchar2(32000);
3 BEGIN
4      SELECT to_string(CAST( COLLECT( substr(object_name,1,1) ) AS table_of_varchar2 ) )
5      INTO    l_longstring
6      FROM    all_objects
7      WHERE   rownum < 2002;
8
9 EXCEPTION
10      WHEN OTHERS THEN
11          raise_application_error(-20001
12                ,   'The anonymous block raised an exception: '||
13                    sqlerrm||'. '||DBMS_UTILITY.format_error_backtrace);
14 END;
15 /
DECLARE
ERROR at line 1:
ORA-20001: The anonymous block raised an exception: ORA-06502: PL/SQL: numeric
or value error: character string buffer too small
ORA-06512: at line 1. ORA-06512: at line 1
ORA-06512: at line 4
ORA-06512: at line 11

Aha, of course.
I was aware of the 4000 character SQL VARCHAR2 limit but didn't think it would apply here since we are calling a PLSQL function and trying to assign the value it returns into a PLSQL varchar2(32000) variable. BUT... we are of course doing this via a SELECT statement and hence via SQL. Therefore the SQL 4000 limit applies.
With this in mind, I changed the RETURN type of the to_string function to be CLOB. This solved the problem.
Thank you,
Andy

I am getting this error message every time i open firefox: "catch all: json.parse: unexpected end of data"

Every time i open Firefox i am getting this message "catch all: json.parse: unexpected end of data". Otherwise everything works just fine, i didn't notice any kind of functionality problems.
Thanks for the help!

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

FODC0002 [{bea-err}FODC0002a]: Error parsing input XML: Error at line:2 col

I have an ODSI Physical Service that is based on a Java Function. The Java Function builds a SQL statement and uses JDBC to query for a ResultSet. One of the columns that is queried is a Clob. Sometimes, the data in this column causes an XMLBeans validation exception in ODSI: {err}XQ0027: Validation failed: error: decimal: Invalid decimal value: unexpected char '114'
The issue is not consistently replicable with particular database record, the database records that present this issue at one point in time will be resolved after a restart of ODSI and replaced by another list of records that present the same error.
As can be seen from the stack trace, it looks like the issue is happening after the database query has returned and while the process is assembling the SOAP response.
Error at line:2 col:481 Line:2 '=' expected, got char[99]
at weblogic.xml.babel.scanner.ScannerState.expect(ScannerState.java:241)
at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:60)
at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:510)
at weblogic.xml.babel.baseparser.EndElement.parse(EndElement.java:34)
at weblogic.xml.babel.baseparser.BaseParser.parseElement(BaseParser.java:457)
at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:326)
at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)
at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
at weblogic.xml.stax.XMLEventReaderBase.parseSome(XMLEventReaderBase.java:189)
at weblogic.xml.stax.XMLEventReaderBase.nextEvent(XMLEventReaderBase.java:122)
at weblogic.xml.query.parsers.StAXEventAdaptor.queueNextTokens(StAXEventAdaptor.java:136)
at weblogic.xml.query.parsers.StAXEventAdaptor.queueNextTokens(StAXEventAdaptor.java:124)
at weblogic.xml.query.parsers.BufferedParser.fetchNext(BufferedParser.java:79)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.runtime.navigation.ChildPath.fetchNext(ChildPath.java:308)
at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:133)
at weblogic.xml.query.schema.BestEffortValidatingIterator$OpenedIterator.hasNext(BestEffortValidatingIterator.java:224)
at weblogic.xml.query.schema.ValidatingIterator.fetchNext(ValidatingIterator.java:82)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.LegacyGenericIterator.next(LegacyGenericIterator.java:109)
at weblogic.xml.query.schema.BestEffortValidatingIterator.fetchNext(BestEffortValidatingIterator.java:85)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.LegacyGenericIterator.next(LegacyGenericIterator.java:109)
at weblogic.xml.query.runtime.typing.SeqTypeMatching.fetchNext(SeqTypeMatching.java:137)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at com.bea.dsp.wrappers.jf.JavaFunctionIterator.fetchNext(JavaFunctionIterator.java:273)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:163)
at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:247)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.runtime.core.ExecutionWrapper.fetchNext(ExecutionWrapper.java:88)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:104)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.LegacyGenericIterator.hasNext(LegacyGenericIterator.java:130)
at weblogic.xml.query.xdbc.util.Serializer.serializeItems(Serializer.java:251)
at com.bea.ld.server.ResultPusher$DSP25CompatibilityPusher.next(ResultPusher.java:236)
at com.bea.ld.server.ResultPusher.pushResults(ResultPusher.java:112)
at com.bea.ld.server.XQueryInvocation.execute(XQueryInvocation.java:770)
at com.bea.ld.EJBRequestHandler.invokeQueryInternal(EJBRequestHandler.java:624)
at com.bea.ld.EJBRequestHandler.invokeOperationInternal(EJBRequestHandler.java:478)
at com.bea.ld.EJBRequestHandler.invokeOperation(EJBRequestHandler.java:323)
at com.bea.ld.ServerWrapperBean.invoke(ServerWrapperBean.java:153)
at com.bea.ld.ServerWrapperBean.invokeOperation(ServerWrapperBean.java:80)
at com.bea.ld.ServerWrapper_s9smk0_ELOImpl.invokeOperation(ServerWrapper_s9smk0_ELOImpl.java:63)
at com.bea.dsp.ws.RoutingHandler$PriviledgedRunner.run(RoutingHandler.java:96)
at com.bea.dsp.ws.RoutingHandler.handleResponse(RoutingHandler.java:217)
at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.java:287)
at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.java:271)
at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:176)
at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:285)
at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:169)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<Apr 29, 2011 12:47:01 PM EDT> <Notice> <ODSI> <BEA-000000> <LabOrderDataServices> <Error occurred performing ODSI operation: {ld:LabOrder/logical/LabOrderReport}getLabOrderDetails:1
weblogic.xml.query.exceptions.XQueryDynamicException: ld:LabOrder/logical/LabOrderReport.ds, line 34, column 6: {err}FODC0002 [{bea-err}FODC0002a]: Error parsing input XML: Error at line:2 col:481 Line:2 '=' expected, got char[99]
at weblogic.xml.query.iterators.AbstractIterator.reportUserError(AbstractIterator.java:95)
at weblogic.xml.query.iterators.AbstractIterator.reportUserError(AbstractIterator.java:147)
at weblogic.xml.query.parsers.Parser.reportParseError(Parser.java:157)
at weblogic.xml.query.parsers.StAXEventAdaptor.queueNextTokens(StAXEventAdaptor.java:225)
at weblogic.xml.query.parsers.StAXEventAdaptor.queueNextTokens(StAXEventAdaptor.java:124)
Truncated. see log file for complete stacktrace
javax.xml.stream.XMLStreamException: Error at line:2 col:481 Line:2 '=' expected, got char[99]
at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:206)
at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
at weblogic.xml.stax.XMLEventReaderBase.parseSome(XMLEventReaderBase.java:189)
at weblogic.xml.stax.XMLEventReaderBase.nextEvent(XMLEventReaderBase.java:122)
at weblogic.xml.query.parsers.StAXEventAdaptor.queueNextTokens(StAXEventAdaptor.java:136)
Truncated. see log file for complete stacktrace
Error at line:2 col:481 Line:2 '=' expected, got char[99]
at weblogic.xml.babel.scanner.ScannerState.expect(ScannerState.java:241)
at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:60)
at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
Truncated. see log file for complete stacktrace
>
Can somebody shed some light on this issue?
Thanks
Edited by: user738507 on May 6, 2011 7:21 AM

Here is the java function:
     * Iterate through the search results and build out the XmlBean response
     * @param helper A helper class used to simplify common JDBC commands
     * @param doc The XmlBean document to populate
     * @param isCollectionsIncluded True if Collection info should be included in results, False otherwise
     * @param isFullDetailsIncluded True if Result data should be included in results, False otherwise
     * @throws Exception
     private static void addOrders(XmlBeansJDBCHelper helper, LabOrderReportDocument doc,
               boolean isCollectionsIncluded, boolean isFullDetailsIncluded) throws Exception {
          int rows = 0;
          ResultSet rs = helper.getResultSet();
          LabOrders labOrders = doc.getLabOrderReport().addNewLabOrders();
          LabOrder record = null;
          HashMap<Long, Collection> parentCollectionMap = null;
          // initialize variable used to track when child elements of the XML should be created
          long previousRowOrderId = 0;
          long previousRowParentOrderCollectionId = 0;
          long previousRowOrderCollectionId = 0;
          long previousRowResultId = 0;
          boolean isRootCollectionNode = false;
          LabOrder.Collections lastParentOuterCollectionsAdded = null;
          com.idexx.services.lde.laborder.Collection.Collections lastParentInnerCollectionsAdded = null;
          com.idexx.services.lde.laborder.Collection lastCollectionAdded = null;
          Result lastResultAdded = null;
          // Loop through the results and build XmlBean nodes for each row
          // Since the SQL is joining Orders to Collections (one-to-many) to Results (one-to-many),
          // and returning a flat structure, there will be duplicate Order data on each row when
          // multiple collections exist on the Order, and duplicate Collection data when multiple
          // Results exist. We can use this fact to determine when to create a new Collection, or
          // Result node.
          while (helper.getResultSet().next())
               rows++;
               long currentRowParentOrderCollectionId = 0;
               long currentRowOrderCollectionId = 0;
               long currentRowResultId = 0;
               long currentRowResultRemarkId = 0;
               //int rowno = helper.getResultSet().getRow();
               // Get the Order ID
               logDebug("Getting the OrderId.....");
               BigInteger dbOrderId = JDBCHelper.getBigInteger(rs, DataConstants.ORDER_ID);
               logDebug("DONE getting the OrderId.");
               long currentRowOrderId = dbOrderId.longValue();
               // Determine the Order ID, Order Collection ID, and Result ID currently being processed.
               // These will be used to determine whether to start a new LabOrder Bean, Collections Bean, or Results Bean
               if (isCollectionsIncluded || isFullDetailsIncluded) {
                    // Get the ParentOrderCollectionID
                    logDebug("Getting the Parent Collection Order ID.....");
                    BigInteger dbParentOrderCollectionId = JDBCHelper.getBigInteger(rs, DataConstants.PARENT_ORDER_COLLECTION_ID);
                    if ( dbParentOrderCollectionId != null )
                         currentRowParentOrderCollectionId = dbParentOrderCollectionId.longValue();
                    else
                         currentRowParentOrderCollectionId = 0;
                    // Get the OrderCollectionID
                    logDebug("Getting the Order Collection ID.....");
                    BigInteger dbOrderCollectionId = JDBCHelper.getBigInteger(rs, DataConstants.ORDER_COLLECTION_ID);
                    if ( dbOrderCollectionId != null )
                         currentRowOrderCollectionId = dbOrderCollectionId.longValue();
                    else
                         currentRowOrderCollectionId = 0;
                    if ( isFullDetailsIncluded ) {
                         // Get the ResultID
                         logDebug("Getting the Result Id.....");
                         BigInteger dbResultId = JDBCHelper.getBigInteger(rs, DataConstants.RESULT_ID);
                         if ( dbResultId != null )
                              currentRowResultId = dbResultId.longValue();
                         else
                              currentRowResultId = 0;
                         // Get the ResultRemarkID
                         BigInteger dbResultRemarkId = JDBCHelper.getBigInteger(rs, DataConstants.RESULT_REMARK_ID);
                         if ( dbResultRemarkId != null )
                              currentRowResultRemarkId = dbResultRemarkId.longValue();
                         else
                              currentRowResultRemarkId = 0;
               isRootCollectionNode = (currentRowParentOrderCollectionId == 0);
               logDebug("currentRowOrderId: " + currentRowOrderId);
               logDebug("previousRowOrderId: " + previousRowOrderId);
               logDebug("currentRowResultId: " + currentRowResultId);
               logDebug("previousRowResultId: " + previousRowResultId);
               logDebug("currentRowResultRemarkId: " + currentRowResultRemarkId);
               logDebug("previousRowResultRemarkId: N/A");
               logDebug("currentRowParentOrderCollectionId: " + currentRowParentOrderCollectionId);
               logDebug("previousRowParentOrderCollectionId: " + previousRowParentOrderCollectionId);
               logDebug("currentRowOrderCollectionId: " + currentRowOrderCollectionId);
               logDebug("previousRowOrderCollectionId: " + previousRowOrderCollectionId);
               if ( currentRowOrderId != previousRowOrderId ) {
                    parentCollectionMap = new HashMap<Long, Collection>();
                    lastParentOuterCollectionsAdded = null;
                    lastParentInnerCollectionsAdded = null;
                    lastCollectionAdded = null;
                    lastResultAdded = null;
                    // This is a new Order, generate a new Lab Order bean
                    record = addOrder(labOrders, helper, dbOrderId, isFullDetailsIncluded);
                    logDebug("Order Added!");
                    // If there is Parent Collection data and it should be included, build a Collections element,
                    // and populate the first one
                    if ( !isRootCollectionNode && (isCollectionsIncluded || isFullDetailsIncluded) ) {
                         lastParentOuterCollectionsAdded = record.addNewCollections();
                         lastCollectionAdded = addCollection(record, helper, lastParentOuterCollectionsAdded, true);
                         logDebug("Collection Added! Is it null? " + (lastCollectionAdded == null));
                    // If there is Collection data and it should be included, build a Collections element,
                    // and populate the first one
                    if ( currentRowOrderCollectionId > 0 && (isCollectionsIncluded || isFullDetailsIncluded) ) {
                         if ( isRootCollectionNode ) {
                              lastParentOuterCollectionsAdded = record.addNewCollections();
                              lastCollectionAdded = addCollection(record, helper, lastParentOuterCollectionsAdded, false);
                              parentCollectionMap.put(new Long(currentRowOrderCollectionId), lastCollectionAdded);
                              logDebug("parent collection added to map: " + currentRowOrderCollectionId);
                         else {
                              lastParentInnerCollectionsAdded = lastCollectionAdded.addNewCollections();
                              lastCollectionAdded = addCollection(record, helper, lastParentInnerCollectionsAdded, false);
                         logDebug("Collection Added! Is it null? " + (lastCollectionAdded == null));
                         // If there is Result data and it should be included, build a Results element,
                         // and populate the first one
                         if ( currentRowResultId > 0 && isFullDetailsIncluded ) {
                              logDebug("Adding result....");
                              lastResultAdded = addResult(record, helper, lastCollectionAdded);
                              logDebug("Result Added!");
                              // If there is Result Remark data and it should be included, build a ResultRemarks element,
                              // and populate the first one
                              if ( currentRowResultRemarkId > 0 && isFullDetailsIncluded ) {
                                   addResultRemark(record, helper, lastResultAdded);
                    logDebug("DONE getting first Collection and Result.");
               else if ( currentRowParentOrderCollectionId != previousRowParentOrderCollectionId
                         && (isCollectionsIncluded || isFullDetailsIncluded) ) {
                    // This is a new, top level, Order Collection to be included
                    lastParentOuterCollectionsAdded = null;
                    lastParentInnerCollectionsAdded = null;
                    lastCollectionAdded = null;
                    lastResultAdded = null;
                    logDebug("Getting next Order Collection...");
                    // If there is Parent Collection data and it should be included, build a Collections element,
                    // and populate the first one
                    if ( !isRootCollectionNode ) {
                         lastCollectionAdded = (com.idexx.services.lde.laborder.Collection)parentCollectionMap.get(new Long(currentRowParentOrderCollectionId));
                         logDebug("A Collection Added! Is it null? " + (lastCollectionAdded == null));
                    // If there is Collection data and it should be included, build a Collections element,
                    // and populate the first one
                    if ( currentRowOrderCollectionId > 0 ) {
                         if ( isRootCollectionNode ) {
                              //LabOrder.Collections collections = record.addNewCollections();
                              lastParentOuterCollectionsAdded = record.getCollections();
                              lastCollectionAdded = addCollection(record, helper, lastParentOuterCollectionsAdded, false);
                              parentCollectionMap.put(new Long(currentRowOrderCollectionId), lastCollectionAdded);
                         else {
                              lastParentInnerCollectionsAdded = lastCollectionAdded.addNewCollections();
                              lastCollectionAdded = addCollection(record, helper, lastParentInnerCollectionsAdded, false);
                         logDebug("B Collection Added! Is it null? " + (lastCollectionAdded == null));
                         // If there is Result data and it should be included, build a Results element,
                         // and populate the first one
                         if ( currentRowResultId > 0 && isFullDetailsIncluded ) {
                              lastResultAdded = addResult(record, helper, lastCollectionAdded);
                              // If there is Result Remark data and it should be included, build a ResultRemarks element,
                              // and populate the first one
                              if ( currentRowResultRemarkId > 0 && isFullDetailsIncluded ) {
                                   addResultRemark(record, helper, lastResultAdded);
               else if ( currentRowOrderCollectionId != previousRowOrderCollectionId
                         && (isCollectionsIncluded || isFullDetailsIncluded) ) {
                    // This is a new Order Collection to be included inside of a parent collection
                    logDebug("Getting next CHILD Order Collection...");
                    logDebug("isRootCollectionNode: " + isRootCollectionNode);
                    logDebug("Order ID: " + helper.getBigInteger(DataConstants.ORDER_ID));
                    logDebug("Order Collection ID: " + helper.getBigInteger(DataConstants.ORDER_COLLECTION_ID));
                    logDebug("Collection ID: " + helper.getBigInteger(DataConstants.COLLECTION_ID));
                    if ( isRootCollectionNode ) {
                         lastCollectionAdded = addCollection(record, helper, lastParentOuterCollectionsAdded, false);
                         parentCollectionMap.put(new Long(currentRowOrderCollectionId), lastCollectionAdded);
                    else {
                         com.idexx.services.lde.laborder.Collection parentCollection = (com.idexx.services.lde.laborder.Collection)parentCollectionMap.get(new Long(currentRowParentOrderCollectionId));
                         if(parentCollection == null) {
                              log(LOG_LEVEL.WARN, "Parent Collection with id: " + currentRowParentOrderCollectionId + " is null for collection id: " + currentRowOrderCollectionId + " but isRootCollectionNode is " + isRootCollectionNode);
                         } else {
                              lastParentInnerCollectionsAdded = parentCollection.getCollections();
                              logDebug("Is lastParentInnerCollectionsAdded null? " + (lastParentInnerCollectionsAdded == null));
                              lastCollectionAdded = addCollection(record, helper, lastParentInnerCollectionsAdded, false);
                    // If there is Result data and it should be included, build a Results element,
                    // and populate the first one
                    if ( currentRowResultId > 0 && isFullDetailsIncluded ) {
                         lastResultAdded = addResult(record, helper, lastCollectionAdded);
                         // If there is Result Remark data and it should be included, build a ResultRemarks element,
                         // and populate the first one
                         if ( currentRowResultRemarkId > 0 && isFullDetailsIncluded ) {
                              addResultRemark(record, helper, lastResultAdded);
               else if ( currentRowResultId != previousRowResultId
                         && isFullDetailsIncluded ) {
                    // There is a new Result to be included
                    logDebug("Getting next Result...");
                    // This is a new result to be included
                    lastResultAdded = addResult(record, helper, lastCollectionAdded);
                    // If there is Result Remark data and it should be included, build a ResultRemarks element,
                    // and populate the first one
                    if ( currentRowResultRemarkId > 0 && isFullDetailsIncluded ) {
                         addResultRemark(record, helper, lastResultAdded);
               else if ( isFullDetailsIncluded ) {
                    // There is a new Result Remark to include
                    logDebug("Getting next Result Remark...");
                    // This is a new result remark to be included
                    addResultRemark(record, helper, lastResultAdded);
               logDebug("Done building response.");
               previousRowResultId = currentRowResultId;
               previousRowParentOrderCollectionId = currentRowParentOrderCollectionId;
               previousRowOrderCollectionId = currentRowOrderCollectionId;
               previousRowOrderId = currentRowOrderId;
          logDebug("Found " + rows + " rows of data.");
     }

JSON.parse: unexpected non-whitespace character after JSON data

I am having problem using cold fusion and jquery.ajax it will throw error
JSON.parse: unexpected non-whitespace character after JSON data
this is the response in firebug {"EMPCODE":"E-00001"}
child.cfm
<cfif IsDefined("empmycode")>
         <cfset myarray= getempCode(#mycode#)>
         <cfoutput>#myarray#</cfoutput>
</cfif>
<cffunction name="getempCode">
       <cfargument name="empcode">
         <cfquery name="empQuery" datasource="#datasource#">
               Select empcode from employee where empcode = '#empcode#'
         </cfquery>
            <cfset mystruct = StructNew()>
            <cfset mystruct.empcode=#empQuery.empcode#>
        <cfreturn   SerializeJSON(mystruct)>
</cffunction>
parent.cfm
$.ajax({
    type: 'post',
        data: {empmycode:empcode},
    url: 'child.cfm',
    success:function(data){
    var myobjc = jQuery.parseJSON(data);
    console.log(myobj.empcode);
Thank you in advance

jemz wrote:
<cfif IsDefined("empmycode")>
         <cfset myarray= getempCode(#mycode#)>
         <cfoutput>#myarray#</cfoutput>
</cfif>
<cffunction name="getempCode">
       <cfargument name="empcode">
         <cfquery name="empQuery" datasource="#datasource#">
               Select empcode from employee where empcode = '#empcode#'
         </cfquery>
            <cfset mystruct = StructNew()>
            <cfset mystruct.empcode=#empQuery.empcode#>
        <cfreturn   SerializeJSON(mystruct)>
</cffunction>
The above code is confusing. You test for the existence of empmycode, yet you actually use mycode instead. In addition, what you call an array isn't, and you fail to 'var' the method's local variables.
You could modify the code, by scoping, as well as bearing in mind what Carl has said:
<cfif IsDefined("form.empmycode")>
    <cfset code= getempCode(form.empmycode)>
    <cfoutput>#code#</cfoutput>
</cfif>
<cffunction name="getempCode">
<cfargument name="empcode">
<cfset var mystruct = StructNew()>

         <cfquery name="empQuery" datasource="#datasource#">
               Select empcode from employee where empcode = <cfqueryparam cfsqltype="cf_sql_integer" value="'#arguments.empcode#">
         </cfquery>
<cfset mystruct.empcode=empQuery.empcode>
<cfreturn   SerializeJSON(mystruct)>
</cffunction>

Can not upgrade. "unexpected system error" [SOLVED]

I seem to have trouble upgrading and synchronizing the databases. I get this output when attempting 'pacman -Syu' and 'pacman -Syy':
:: Synchronizing package databases...
error: failed to update testing (unexpected system error)-----------------] 0%
error: failed to update core (unexpected system error)--------------------] 0%
error: failed to update extra (unexpected system error)-------------------] 0%
error: failed to update community (unexpected system error)---------------] 0%
archlinuxfr 25.0K 60.7K/s 00:00:00 [#####################] 100%
compiz-fusion 3.6K 26.0K/s 00:00:00 [#####################] 100%
I have tried searching for a solution here but it seems that no one else is experiencing this issue (unless I over looked a post). I see nothing about this in the news section of the home page so it might not be a common issue.
This is what my pacman.conf file looks like:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
[testing]
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
[compiz-fusion]
Server = http://compiz.dreamz-box.de/i686
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Is there a log file I can check to see what happened exactly or is there something that can be done for me to sync the databases again. Any help is appreciated.
Last edited by vytalelementz (2008-10-13 13:45:48)

Here is my mirrorlist:
# Arch Linux repository mirrorlist
# North America
# - United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = http://archlinux.unixheads.org/$repo/os/i686
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
Server = http://mirror.rit.edu/archlinux/$repo/os/i686
Server = http://mirror.umoss.org/archlinux/$repo/os/i686
Server = http://schlunix.org/archlinux/$repo/os/i686
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
Server = http://mir.archlinux.fr/$repo/os/i686
Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.rez-gif.supelec.fr/Linux/archlinux/$repo/os/i686
# - Germany
Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Norway
Server = http://arch.likbilen.com/$repo/os/@carch
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = http://unix.net.pl/archlinux.org/$repo/os/i686
# - Portugal
Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
Server = http://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
Server = ftp://hell.org.ua/archlinux/$repo/os/i686
Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# - Vietnam
# Domain name is ftp.indochinalinux.com but there are frequent DNS problems
Server = ftp://202.78.230.5/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

Package Returning Error ORA-06502: PL/SQL: numeric or value error

Hi,
I create a package to export to spread sheet .xls, The package work for simple query if i pass the query to package.
There is no error in package please create the package and do the following as mentioned below
create or replace
PACKAGE export_pkg_spread_sheet
AS
procedure download_excel(vsql in clob );
PROCEDURE excel_header(p_header in out nocopy clob);
procedure excel_content(p_content in out nocopy clob,
vsql in clob );
procedure excel_footer(p_footer in out nocopy clob);
procedure get_usable_sql (p_sql_in IN clob,
p_sql_out OUT clob);
END export_pkg_spread_sheet;
create or replace
PACKAGE body export_pkg_spread_sheet
AS
PROCEDURE excel_header (p_header IN OUT nocopy CLOB)
AS
BEGIN
p_header := '<html><body>';
END;
procedure download_excel( vsql in clob )
as
p_header clob;
p_footer clob;
p_content clob;
begin
owa_util.mime_header( 'application/octet', FALSE );
htp.p('Content-Disposition: attachment; filename="report.xls"');
owa_util.http_header_close;
excel_header( p_header);
excel_content(p_content,vsql);
excel_footer(p_footer);
dbms_output.put_line(p_header ||p_content|| p_footer);
HTP.PRN( p_header ||p_content|| p_footer);
htmldb_application.g_unrecoverable_error := true;
end;
procedure excel_content(p_content in out nocopy clob,
vsql in clob)
as
p_sql_stmt clob;
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
TYPE varColumn     IS TABLE OF varchar2(32000);
vtab varColumn;
v_column_count     NUMBER     DEFAULT 0;
v_status      INTEGER;
BEGIN
htp.prn('am here');
/* SELECT region_source into p_sql_stmt
FROM apex_application_page_regions
WHERE region_id = p_region_id AND
page_id = p_page_id AND
application_id = p_app_id; */
get_usable_sql (vsql,p_sql_stmt);
p_content := p_sql_stmt;
-- Parse the query.
DBMS_SQL.PARSE(cur, p_sql_stmt , DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
p_content := '<table> <tr>';
FOR colind IN 1 .. ncols
LOOP
p_content := p_content || '<td>' || cols(colind).col_name || '</td>';
END LOOP;
p_content := p_content || '</tr>';
vtab := varColumn(null);
for i in 1..ncols
loop
vtab.extend;
DBMS_SQL.DEFINE_COLUMN (cur, i, vtab(i), 2000);
--dbms_output.put_line(vtab(i));
end loop;
v_status := DBMS_SQL.EXECUTE (cur);
LOOP
p_content := p_content || '<tr>';
EXIT WHEN (DBMS_SQL.FETCH_ROWS (cur) <= 0);
FOR i IN 1 ..ncols
loop
DBMS_SQL.COLUMN_VALUE (cur, i, vtab(i));
-- p_content := p_content || '<td>' || 'xyz' || '</td>';
p_content := p_content || '<td>' || vtab(i) || '</td>';
END LOOP;
p_content := p_content || '</tr>' ;
END LOOP;
p_content := p_content || '<table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
exception
when others then
     p_content := '<td>Exception Error in printing data</td><table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
end;
procedure excel_footer( p_footer in out nocopy clob)
as
begin
p_footer := '</body></html>';
end;
PROCEDURE get_usable_sql (p_sql_in IN clob, p_sql_out OUT clob)
IS
v_sql clob;
v_names DBMS_SQL.varchar2_table;
v_pos NUMBER;
v_length NUMBER;
v_exit NUMBER;
BEGIN
v_sql := p_sql_in;
v_names := wwv_flow_utilities.get_binds (v_sql);
FOR i IN 1 .. v_names.COUNT
LOOP
<<do_it_again>>
v_pos := INSTR (LOWER (v_sql), LOWER (v_names (i)));
v_length := LENGTH (LOWER (v_names (i)));
v_sql :=
SUBSTR (v_sql, 1, v_pos - 1)
|| v_names (i)
|| SUBSTR (v_sql, v_pos + v_length);
v_sql :=
REPLACE (v_sql,
UPPER (v_names (i)),
'(SELECT v('''
|| LTRIM (v_names (i), ':')
|| ''') FROM DUAL)'
IF INSTR (LOWER (v_sql), LOWER (v_names (i))) > 0
THEN
GOTO do_it_again;
END IF;
END LOOP;
p_sql_out := v_sql;
END;
END export_pkg_spread_sheet;
After creating the package pass the parameter to package like this
begin
export_pkg_spread_sheet.download_excel('select * from emp');
end;
Package will allow to download the spread shreet. If i try to pass the a complex query to package it is returning error as mentioned below
ORA-06502: PL/SQL: numeric or value error
In the above package there is a procedure called procedure excel_content which actuall prints the data in the spread sheet this is where the error is coming from there is a variable called vsql have declared it as clob to hold large string but still i am getting the same error when trying to pass a big string.
Please check the error and let me know.
Thanks
Sudhir

Hi Praveen,
This is the query i am using to pass
Declare
qry clob;
Begin
qry := ' 'SELECT
AR.REGION_CODE,
AR.DISTRICT_CODE,
AR.TERRITORY_CODE,
CASE
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.REGION_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.DISTRICT_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NOT NULL THEN
AR.TERRITORY_NAME
END TERR_NAME,
AR.EMPLOYEE_ID,
AR.LAST_NAME,
AR.FIRST_NAME,
AR.GENDER,
AR.DATE_OF_HIRE,
AR.PROJECT_EMPLOYEE_TITLE_ID,
AR.COMPANY_ID,
AR.CUSTOMER_EMAIL,
AR.BUSINESS_EMAIL,
AR.CUSTOMER_VOICEMAIL,
AR.CUSTOMER_VOICEMAIL_EXT,
AR.QUINTILES_VOICEMAIL,
AR.QUINTILES_VOICEMAIL_EXT , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ZipCode" FROM AR_V_ROSTER AR
LEFT JOIN AR_V_ADDRESS_HISTORY AAH
ON
(AR.PROJECT_ID = AAH.PROJECT_ID AND
AR.EMPLOYEE_ID = AAH.EMPLOYEE_ID)
WHERE
UPPER(AR.USER_EMPLOYEE_ID) = ''Q766730'' AND
AR.PROJECT_ID = 81 ';
export_pkg_spread_sheet.download_excel(qry);
End;
Praveen you can pass your DB table query to check the error. I am trying to pass as mentioned above.
Please let me know if my question is not clear.
Thanks
Sudhir

Error: ORA-06502: PL/SQL: numeric or value error:NULL index table key value

Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind

Ashish_Apps wrote:
Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated BindVerify the rows you are fetching are having the same data types as your Record like Dates should go to date , decimal should not be fetched in type defined as number etc.

Execute SQL Task, OLE DB, Stored Procedure, Returns unexpected value upon second run

when debugging SSIS, the "Execute SQL Task" runs a stored procedure and returns the expected value. When running the package a second time, the task returns an unexpected value. When running in VS2012 SQL editor, everything operates as expected.
Please help me debug how to get the stored proc to return the same value every time the SSIS Package is run. thanks!
Here is the sequence of events and what happens....
Look for a Positor that matches the Application, Host, and User
No matching PositorId is found, Creates new Positor row, returns that new PositorId
Use PositorId to upload some data (Every thing works)
re-run/debug the ssis pacakge
Look for a Positor that matches the Application, Host, and User
<No clue what is happening>
Returns -1 (SHOULD BE the same PositorId value returned in #2)
"Execute SQL Task" Setup: No edits to Result Set nor Expressions
"Execute SQL Task" Setup: GENERAL
"Execute SQL Task" Setup: PARAMETER MAPPING
SP called by "Execute SQL Task"
CREATE PROCEDURE [posit].[Return_PositorId]
AS
BEGIN
DECLARE @PositorId INT = [posit].[Get_PositorId]();
IF (@PositorId IS NULL)
BEGIN
DECLARE @ProcedureDesc NVARCHAR(257) = OBJECT_SCHEMA_NAME(@@PROCID) + N'.' + OBJECT_NAME(@@PROCID);
DECLARE @PositorNote NVARCHAR(348) = N'Automatically created by: ' + @ProcedureDesc;
EXECUTE @PositorId = [posit].[Insert_Positor] @PositorNote;
END;
RETURN @PositorId;
END;
Supporting SQL Objects:
CREATE FUNCTION [posit].[Get_PositorId]
RETURNS INT
AS
BEGIN
DECLARE @PositorId INT = NULL;
SELECT TOP 1
@PositorId = [p].[PO_PositorId]
FROM [posit].[PO_Positor] [p]
WHERE [p].[PO_PositorApp] = APP_NAME()
AND [p].[PO_PositorHost] = HOST_NAME()
AND [p].[PO_PositorUID] = SUSER_ID();
RETURN @PositorId;
END;
GO
CREATE PROCEDURE [posit].[Insert_Positor]
@PositorNote NVARCHAR(348) = NULL
AS
BEGIN
DECLARE @ProcedureDesc NVARCHAR(257) = OBJECT_SCHEMA_NAME(@@PROCID) + N'.' + OBJECT_NAME(@@PROCID);
SET @PositorNote = COALESCE(@PositorNote, N'Automatically created by: ' + @ProcedureDesc);
DECLARE @Id TABLE
[Id] INT NOT NULL
INSERT INTO [posit].[PO_Positor]([PO_PositorNote])
OUTPUT [INSERTED].[PO_PositorId]
INTO @Id([Id])
VALUES(@PositorNote);
RETURN (SELECT TOP 1 [Id] FROM @Id);
END;
GO
CREATE TABLE [posit].[PO_Positor]
[PO_PositorId] INT NOT NULL IDENTITY(0, 1),
[PO_PositorApp] NVARCHAR(128) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorApp] DEFAULT(APP_NAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorApp] CHECK([PO_PositorApp] <> ''),
[PO_PositorName] NVARCHAR(256) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorName] DEFAULT(SUSER_SNAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorName] CHECK([PO_PositorName] <> ''),
[PO_PositorHost] NVARCHAR(128) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorHost] DEFAULT(HOST_NAME()),
CONSTRAINT [CL__PO_Positor_PO_PositorHost] CHECK([PO_PositorHost] <> ''),
[PO_PositorSID] VARBINARY(85) NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorSID] DEFAULT(SUSER_SID()),
[PO_PositorUID] INT NOT NULL CONSTRAINT [DF__PO_Positor_PO_PositorUID] DEFAULT(SUSER_ID()),
[PO_PositorNote] VARCHAR(348) NULL CONSTRAINT [CL__PO_Positor_PO_PositorNote] CHECK([PO_PositorNote] <> ''),
[PO_tsInserted] DATETIMEOFFSET(7) NOT NULL CONSTRAINT [DF__PO_Positor_PO_tsInserted] DEFAULT(SYSDATETIMEOFFSET()),
[PO_RowGuid] UNIQUEIDENTIFIER NOT NULL CONSTRAINT [DF__PO_Positor_PO_RowGuid] DEFAULT(NEWSEQUENTIALID()) ROWGUIDCOL,
CONSTRAINT [UX__PO_Positor_PO_RowGuid] UNIQUE NONCLUSTERED([PO_RowGuid]),
CONSTRAINT [UK__Positor] UNIQUE CLUSTERED ([PO_PositorApp] ASC, [PO_PositorHost] ASC, [PO_PositorUID] ASC),
CONSTRAINT [PK__Positor] PRIMARY KEY ([PO_PositorId] ASC)
GO
ssd

The error is in item 7: Returns -1 (SHOULD BE the same PositorId value returned in #2); but no error message is returned or thrown from SSIS.
The error message indicated referential integrity is not upheld when inserting records. This error message occurs AFTER the Execute SQL Task successfully completes; the E.SQL Task returns -1. The executed SQL code will not allow values less than 0
([PO_PositorId] INT NOT NULL IDENTITY(0, 1),)
[Platts Valid [41]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E2F.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E2F Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E2F Description:
"The INSERT statement conflicted with the FOREIGN KEY constraint "FK__PricingPlatts_Posit_PositorId". The conflict occurred in database "Pricing", table "posit.PO_Positor", column 'PO_PositorId'.".
The aforementioned FOREIGN KEY constraint is due to the value being returned by the Execute SQL Task.; therefore, the error lies in the value returned by the Execute SQL Task.

Numeric or value error when submitting form

I have a form based of a stored procedure. The form has about 20 fields on it. For some reason the form only allows data entry on only about 10 of them. If I put data in any of the other 10, I get: "An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)"
I have looked everywhere to see what's going on. I checked the procedure to make sure its parameters are good. It takes takes all VARCHAR2's, so thats OK. I checked the fields in the form editor for validation, and none are being validated, so thats OK. I made sure all the fields are updatable and they are. I even checked the table to make sure that the data can go into the fields, even though I know that the error returned there would be through the procedure, not Portal. I am stumped. What am I missing?
Rich

Follow Up: While troubleshooting this, I filled in all the fields with one character each and the form submitted. I added characters little by little to each field until I got the error. It seems like Portal has a problem when I pass X amount of characters from a form. I say "Portal" because I thought this might be an OS parameter, but I get the same error in both Win2000 and Solaris.
Any ideas where this setting is? Or how to change it?
Rich

6502 = ORA-06502: PL/SQL: numeric or value error: character string buffer

i'm getting this error when i try to do the following
6502 = ORA-06502: PL/SQL: numeric or value error: character string buffer too small
declare
str1Query varchar2(32767);
str2Query varchar2(32767);
str3Query varchar2(32767);
str31Query varchar2(32767);
str32Query varchar2(32767);
str4Query varchar2(32767);
desc_t dbms_sql.desc_tab2;
l_col_cnt integer;
colvalue varchar(32676);
cur_rows number;
repCursor integer;
begin
repCursor := dbms_sql.open_cursor;
dbms_sql.parse(repCursor,str1Query || ' ' || str2Query || ' ' || str3Query || ' ' || str31Query || ' ' || str32Query || str4Query,dbms_sql.native);
dbms_sql.describe_columns2( repCursor, l_col_cnt, desc_t );
DBMS_SQL.CLOSE_CURSOR (repCursor);
end;
if there is any ideas about what is wrong

That is not the PL/SQL block that you have run to get that error, right?
What are the sizes of the individual variables - str1Query, str2Query etc...
Whay are there so many variables joined together?
That posted code cannot generate the error you posted:
SQL> declare
2
3 str1Query varchar2(32767);
4 str2Query varchar2(32767);
5 str3Query varchar2(32767);
6 str31Query varchar2(32767);
7 str32Query varchar2(32767);
8 str4Query varchar2(32767);
9 desc_t dbms_sql.desc_tab2;
10 l_col_cnt integer;
11 colvalue varchar(32676);
12 cur_rows number;
13 repCursor integer;
14
15 begin
16
17 repCursor := dbms_sql.open_cursor;
18 dbms_sql.parse(repCursor,str1Query || ' ' || str2Query || ' ' || str3Query || ' ' || str31Query || ' ' || str32Query || str4Query,dbms_sql.native);
19 dbms_sql.describe_columns2( repCursor, l_col_cnt, desc_t );
20 DBMS_SQL.CLOSE_CURSOR (repCursor);
21 end;
22 /
declare
ERROR at line 1:
ORA-00900: invalid SQL statement
ORA-06512: at "SYS.DBMS_SYS_SQL", line 826
ORA-06512: at "SYS.DBMS_SQL", line 39
ORA-06512: at line 18
SQL>

Impdp Worker unexpected fatal error KUPW$WORKER.PUT_DDLS

I`m trying to import IMPDP, dump from (linux oracle 10.02.00.01.00) to oracle 11
and i get :
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS [TRIGGER:"SKASUJMNIE"."ADD_BS_CM"] ]
ORA-06502: PL/SQL: numeric or value error
LPX-00225: end-element tag "COLS_ITEM" does not match start-element tag "BODY"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8164
----- PL/SQL Call Stack -----
object line object
handle number name
0x112977a48 19028 package body SYS.KUPW$WORKER
0x112977a48 8191 package body SYS.KUPW$WORKER
0x112977a48 15631 package body SYS.KUPW$WORKER
0x112977a48 3944 package body SYS.KUPW$WORKER
0x112977a48 8874 package body SYS.KUPW$WORKER
0x112977a48 1651 package body SYS.KUPW$WORKER
0x11f7bee10 2 anonymous block
it happens only where i import triggers ( include=triggers )
file copy was made by scp (so i guess it binary mode ) , i think it occurs in metalink and it problem requires install patch.
Is that any other way to read this trigger pl sql code from dmp file, using pl sql package or program such as awk or sed ?
Kamila

This looks like a corrupted dumpfile.
From what I see in the text that you listed, DataPump import is trying to convert an xml document to ddl and LPX was looking for <BODY> and it got <COLS_ITEM>.
LPX-00225: end-element tag "COLS_ITEM" does not match start-element tag "BODY"
I'm not familiar with scp, but you can try this on the source.
run the same impdp command with this:
sqfile=my_objects.sql
If it works then the dumpfile on the source is good. If not, then the dumpfile on the source is bad.
Looking in the dumpfile will not help much. What you will see in there is xml and you would have to find the right xml document for the object you are looking for and then try to figure out how to convert it to ddl.
Dean

Parser - "Unexpected value" error

Similar Messages

Maybe you are looking for