Partial Records insertion using DB Adapter - SOA 11g

Hi,
We have a BPEL process in which we are inserting records in a table using DB Adapter. Currently if the input data has any problem of data type miss-match then all the records are rejected. None of the records are inserted in the table. Whole batch is rejected.
We have a new requirement that when there is problem is any record, then only that problematic record is rejected and rest of the records are inserted in the table. Is it possible to do so?
Thanks,
Sanjay

In that case, its better to move the insert statement into procedure and do the insert and return value, if the insert statement is more then this will increase the performance time.
How many rows you will insert at very worst case ? like 100 lines ?
Thanks,
Vijay

Similar Messages

Trigger a BPEL Process using Email in SOA 11g

Hi All,
Greetings to SOA Gurus!!!
We are currently working on an Upgrade Project from SOA 10g to 11g and we have a requirement to upgrade a BPEL process which got triggered using an email in SOA 10g. We are not sure how we can achive this in SOA 11g instance. Any help on this is highly appreciated.
Thanks,
Saravana

Hi Saravana,
This feature is not out yet in 11g and is available only through Preview version.
http://technology.amis.nl/2012/05/18/proces-email-with-the-new-ums-adapter-of-soa-suite-ps5/
You can use the above (without claiming support though) or can deploy OSB to do the same.
http://beatechnologies.wordpress.com/tag/message-flow-with-email-trigger/
Regards,
Neeraj Sehgal

Using Coherence adapter in 11g OSB projects

Hi
I have a situation in which I have to get some properties from a file to be used later in the flow.When I am reading the file its a i/o process and consumes CPU cycle and causes delay.So I want to read the properties from the file for the first time and then cache my results in memory to be preserved for transaction that are going to happen at later point of time, so as to reduce delays.
I guess coherence adapter can help me out and can save me from java callout which can give similar caching functionalities.But my project is on 11g not 12c, so my question is can i use coherence adapter in my case, if so how to use it and if not is there any better way to attain this other than java callout.

Use the below approach to set the directory and file names dynamically.
In BPEL source mode, specify the bpelx:inputProperty. Set the values for these variables in bpel. These can also be accessed as bpel preference values.
<invoke>
<bpelx:inputProperty name="jca.ftp.SourceFileName" variable="SourceFileNameVar"/>
<bpelx:inputProperty name="jca.ftp.TargetFileName" variable="TargetFileNameVar"/>
</invoke>

Commit each record while insert using DB adapter

Hi,
I am working on an ESB process, wherein i use the DB adapter to insert multiple records into a table.
The ave count of records could easily be more that 50.
Appears, the default behaviour of the adapter is to commit only once after all records have been inserted. However, need is to commit each row as i insert it. Will help even if i can commit in batches of say, 10.
Please advice how this may be done.
Regards,
Sambhav.

The DBAdapter does this in single commit, so that a rollback can take place in case of failure.
You will need to use compensate activity if at all you want to commit mid way.
Is there any particular reason that you are looking to commit them in shorter batches?
Every Little Helps
Kalidass Mookkaiah
MyBlog

Oracle 10 Million records insert using Pro c

Hi,
     As i am new to Oracle 10G Pro c and SQL Loader, i would like to know few informations regarding the same.
My requirement is this that, i need to read a 20GB file (20Million Lines) line by line and convert the line into database records with few data manipulation and insert
into a Oracle 10G database table.
     I read some articles and it says Pro C is faster than SQL Loader in performance (fast insertion). And also Pro C talks to
the oracle directly and it puts the data pages directly into Oracle but not through SQL Engine or Parser.
     Even in the Pro c samples, i have seen a For loop to insert mulitple records. Will each insertion cost
     more time ?
     Is there any bulk insert program on Pro C like 10 Million rows at a shot ?
     Or Pro c can do upload of a file data into Oracle database table ?
     If any one already posted this query means please inform me the thread number or id
Thank you,
Ganesh
Edited by: user12165645 on Nov 10, 2009 2:06 AM

Alex Nuijten wrote:
Personally I would go for either an External Table or SQL*Loader, mainly because I've never used Pro*C.. ;)
And so far I never needed to resort to other option because of poor performance.I fully agree. Also we are talking about "only" 10 mill rows. This will take some time, but probably not more than 30 min, max. 2 hours depending on many factors including storage, network and current database activities. I've seen systems where such a load took only a few minutes.
I guess if there is a difference between Pro*C and external tables I would still opt for external tables, because they are so much easier to use.

RENAME/COPY/DELETE a file using FTP Adapter in 11g using dynamic values

Hi All
We have a requirement to do the above for a client. I was able to find a post\blog that tells you to add the below properties in FTP adapter JCA file and it works but,
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPIoInteractionSpec">
<property name="SourcePhysicalDirectory" value="foo1"/>
<property name="SourceFileName" value="bar1"/>
<property name="TargetIsRemote" value="false"/>
<property name="TargetPhysicalDirectory" value="foo2"/>
<property name="TargetFileName" value="bar2"/>
<property name="Type" value="COPY"/>
</interaction-spec>
The problem is that how to assign these values dynamically (from xpath or bpel variables etc). Can somebody provide me with some pointers? Its very urgent!

Use the below approach to set the directory and file names dynamically.
In BPEL source mode, specify the bpelx:inputProperty. Set the values for these variables in bpel. These can also be accessed as bpel preference values.
<invoke>
<bpelx:inputProperty name="jca.ftp.SourceFileName" variable="SourceFileNameVar"/>
<bpelx:inputProperty name="jca.ftp.TargetFileName" variable="TargetFileNameVar"/>
</invoke>

Garbage values getting inserted using Database Adapter

Hi,
I am facing a particular problem for an interface in the prod env. The problem is like this...
The interface pulls record set from database and some records in the set is in "French". But in the output variable of the invoke activity , the payload shows some junk values for those values (e.g Name) in French.
If anybody has ever encountered such problem, please let me know the solution.
Waiting for a reply asap...
Thanks a lot
P.S

HI
Please provide me below details.
1) had u found junk characters in log file or destination application?
2) Is integration is between Two database applications? if yes, please check whether NLS_LANG parameters are set properly for the language.
3) As this was found in production,I guess this issue was not encoutntered while testing.So,please compare the settings/setup done in testing instance and Production instance.
4) if still cannot fix,please update this thread with type of integration (DB to DB or Db to File or any otheer) and adapter properties.
Thanks

How to read MS-Excel file by using file Adapter

hi friends,
I have an issue on read Operation by using file Adapter.
It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
So friends, please help me how to solve this problem?
Thanks in Advance..

See also this post:
Read Excel File Using FileAdapter in SOA 11g
It might help you

3rd Party Adapters in Soa 11g

Hi All,
Can anybody tell me from where i can download the external (third party) adapters like SAP, Siebel.... for SOA 11g?
from previous posts it was said that there are no 3rd party adapters included in Soa 11g.. But if there are available for soa 10g then Can I use those in SOA 11g?
If so how can I use them?...
Thanks
Marias

Hi,,
Thanks for the response. I installed the third party adapters. Now how can i start using them in the bpel process 11g..
Please correct me if im going wrong.. Can we see those adapters in jdeveloper 11g as we see the previous db, file etc....
--Marias

Need Help-SOA 11g File Adapter unable to delete input file and its crashing

Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
Dibya

Hi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N

How to use JKS-based Keystore in Oracle SOA 11g

I am trying to do FTPS on third party remote server(with UNIX OS) using SOA 11g FTP Adapter. I have Installed and Configured vsftpd and generated vsftpd.pem certificate file on remote server.
Followed the steps mentioned in http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#CIABDGCF
In one of the step "Setting Up the Oracle FTP Adapter" walletLocation is required, then I went through steps mentioned in http://download.oracle.com/docs/cd/E17904_01/core.1111/e10105/wallets.htm#CHDGIJDC
Tried to use both 1) JKS Keystore Management 2) Wallet Management
But unable to find both of them in em of Oracle SOA 11g as the steps are not matching.
Can anyone tell me how to use JKS Keystore Management or Wallet Management ?
Many Thanks!!
Regards
Yogesh

Hi Yogesh,
I believe the wallet can be created from the FMW console only if the HTTP server is installed and available. If there is no Oracle HTTP server, please configure one as given under.
[ http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14260/toc.htm | Oracle HTTP Server Installation ]
Reards,
Neeraj Sehgal

BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite

Hi,
I am just testing one simple SOA Application in SOA 11g Suite. Created a SOA Composite Application with one DB Adapter at designtime all worked fine with DB Adapter. But when I deploy the Application on the server I get the following error:
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/soademoDatabase'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/soademoDatabase. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ".Do I need to jndi-name in weblogic-ra.xml if so what is the exact location. Any help is appreciated.
Thanks

I did but still not able to connect now getting the following error. I went to the Weblogic Console, clicked on deployments, selected DBAdapter, clicked on configuration ,
and then I don't see outbound configurations instead it shows Outbound Connection Pools, Under Outbound Connection Pools tab I clicked on New and it asked to select Outbound Connection Group I selected the one that was already there (with JNDI eis/DB/SOADemo) and then created my JNDI which was added to the default Outbound Connection Group and in the end it asked to save the Plan.xml which I saved it under a new directory created under soa directory. But still am not able to connect.
How do I create my own Connection Group as don't want to use the defualt one out there.
After creating the JNDI Name it asks for saving the Plan.xml file. Where exactly we save this file. Are there any standards.
Why can't I update any properties when I click on the new JNDI name it takes to Settings for javax.resource.cci.ConnectionFactory --> Outbound Connection Properties but there I see a save buttn but I can't make any changes.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception. Missing Property: [DBManagedConnectionFactory.userName]. You may have set a property (in _db.jca) which requires another property to be set also. Make sure the property is set in the interaction (activation) spec by editing its definition in _db.jca. . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. Is there any documentation that lists all these steps as I couldn't find it anywhere. The guide only talks abou DBAdapter but how to configure etc can't find any info. Any help is appreciated.
Thanks.

Request-Reply in JMSAdapter SOA 11g using a Topic and a Queue

Hi All
We are trying to implement JMS Request\Reply with Tibco EMS Server using JMS Request\Reply. Problem is that Tibco has exposed a topic (where request message has been enqueued) and replies the message is a pre defined JMS queue.
I am trying to use JMS adapter in SOA 11g (OSB doesnt support request\reply as soon as destination is selected as Topic ) with foreign JMS server setup in weblogic.
Problem is that when i invoke the composite, it errors out saying that request destination has to be a queue. I tried to find any sample that talks about request-reply with topics but could not find any.
Is request-reply pattern supported with topics or topic-queue combinations in JMS adapter 11g? Please let u know. Thanks

Hi All
The request-reply pattern is working with queues and topics, but not with topic and queue. The issue is with this:
<adapter-config name="RemoteOSBJMSService" adapter="JMS Adapter"
wsdlLocation="RemoteOSBJMSService.wsdl"
xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/JMS/RequestReplyTopic"
UIJmsProvider="WLSJMS" UiOperationMode="Asynchronous"
UIConnectionName="chdsez147855d"/>
<endpoint-activation portType="Reply_ptt" operation="Reply"
UITransmissionPrimitive="Request-response">
<activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
<property name="PayloadType" value="TextMessage"/>
<property name="UseMessageListener" value="false"/>
<property name="DestinationName" value="jms.soa.local.response.q"/>
</activation-spec>
</endpoint-activation>
<endpoint-interaction portType="Request_ptt" operation="Request"
UITransmissionPrimitive="Request-response">
<interaction-spec className="oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec">
<property name="TimeToLive" value="0"/>
<property name="PayloadType" value="TextMessage"/>
<property name="DeliveryMode" value="Persistent"/>
<property name="DestinationName" value="jms.soa.local.request.topic"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
The connection factory "eis/JMS/RequestReplyTopic" can either hold isTopic as false or true. If i set it to false, it doesnt even let me enqueue and if i set it to true. The reply doesnt arrive.
Please help!

Quering MySql DB tables using DB adapter in Oracle SOA

Hi',
I am trying to query MySql DB tables using DB adapter in Oracle SOA.
inside the weblogic server console I have created a data source and test is "success" MySql
Now inside the deployments > DBAdapter > Configuration > outbound connection pools
I am new outbound connection, however I only get one option by default "javax.resource.cci.ConnectionFactory".
which is default pointing to oracle DB.
If someone has implemented this earlier or some blog/document demonstrates this please let me know.
Thanks
Yatan

Thanks Naresh,
actually I tried changing the "platformClassName" to "oracle.toplink.platform.database.MySQL4Platform" in the existing connection factory.
I am able to update the DBAdapter successfully, however when I try to run the service created in JDEV which uses this MySql DB table it gives me below error.
I also have another doubt regarding "How can we create a new connection factory in weblogic console?"
ERROR:
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7042] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.ValidationException
*Exception Description: Database platform class [org.eclipse.persistence.platform.database.MySQL4Platform] not found.*
Internal Exception: Exception [EclipseLink-3007] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.ConversionException
Exception Description: The object [org.eclipse.persistence.platform.database.MySQL4Platform], of class [class java.lang.String], could not be converted to [class java.lang.Class]. Ensure that the class [org.eclipse.persistence.platform.database.MySQL4Platform] is on the CLASSPATH. You may need to use alternate API passing in the appropriate class loader as required, or setting it on the default ConversionManager
Internal Exception: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: org.eclipse.persistence.platform.database.MySQL4Platform
Dependent class: org.eclipse.persistence.internal.helper.ConversionManager
Loader: sun.misc.Launcher$AppClassLoader@13288040
Code-Source: /C:/Oracle/MiddlewarePS4/modules/org.eclipse.persistence_1.1.0.0_2-1.jar
Configuration: /C:/Oracle/MiddlewarePS4/modules/org.eclipse.persistence_1.1.0.0_2-1.jar
This load was initiated at default.composite.MySqlTest.soa_2c170363-5ad7-4578-8920-f30fb224a8d2:1.0 using the Class.forName() method.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.

Oracle EBS Inbound/Outbound Interface build using Oracle SOA 11g

Hi SOA Guru's,
I am very much new to SOA 11g, could you guy's help me in understanding "How I can build any Oracle EBS Inbound/Outbound interface using Oracle SOA 11g"
It will be great if anybody explain me with any example script/screen shot/document.
Thanks in advance.
Regards
Pankaj

I don't have any experience with ebs, but i assume it works like this.
In the composite editor you will find a list adapters at the right..over here you will also find the oracle applications (ebs) adapter.
This will be the component for you which will communicate with the ebs packages.
you need to drag this adapter on the swim lane, and after that you should create the composite application like the way it's described in the tutorials Oracle supplies, put a mediator component in the middle and expose this interface (drag the line to the left swim line)
Hope it's a bit clear like this ?
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/fod_intro2.htm
this should make a few things clear too

Partial Records insertion using DB Adapter - SOA 11g

Similar Messages

Maybe you are looking for