Parties involved are not visible in WEB UI..they are onlyvisible in SAP GUI

Hi,
I have created a sales order with some line items. The problem is,
When I click on item, in SAP GUI, I can see all the partners determined. However, when I open in WEB UI, I am unable to see any of the partnets in "Parties Involved" assignment block.
Could you please let me know, how to solve this?
Thanks,
Sandeep

Sandeep - Try clicking Personlize icon in the work area toolbar, this will open a popup to show "Available assignment blocks". Search for "Involved parties" under this block, select it and move it under "Displayed assignment blocks" and SAVE. This should make the assignment block for partners visible on the webUI.
If you do not find the assignment block in the popup, then try pressing "Reset to default" which would reset the view configuration to default and make the standard assignment blocks available for configuration.

Similar Messages

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Partners involved are not visible in WEB UI..they are only visible inSAPGUI

    Hi,
    I have created a sales order with some line items. The problem is,
    When I click on item, in SAP GUI, I can see all the partners determined. However, when I open in WEB UI, I am unable to see any of the partnets in "Parties Involved" assignment block.
    Could you please let me know, how to solve this?
    Thanks,
    Sandeep
    Edited by: Sandeep Reddy on May 19, 2011 12:10 PM

    Hi,
    we have the same problem...
    please let know if you solved the problem
    thanks

  • All the pricing conditions are not visible for a given sales area, material

    Hello All,
    There is a customized screen with sales area(Sales org, distribution channel and division), material and sold to party. There is buttton when we click it has to display the pricing conditions. The problem here is it is not displaying all the conditions some conditions like ZB02 and MWST are missing. The Function module used is PRICING.
    Whereas in VA03 tranaction for a sales order created with this sales area, material it is showing all the conditions for a item.
    Please help me to solve this issue.
    Many Thanks,
    Rama

    Hi
    The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
    DJ>>  Hope the required sales area is available in CRM.
    The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
    DJ>> Please check the following -
    1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area.  Ideally it should get replicated if all you middleware settings are fine.
    2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
    Hope this will help
    Regards

  • Extension icons/menus are not visible even though the extensions are enabled. How to fix?

    Extensions do not work as they should when enabled. They do not show up in their designated places (status bar, next to address bar, right-click menu). This applies to all extensions. I have disabled, re-enabled, and messed with the options. Nothing seems to work. Is there any way to fix this?
    I have tried changing the settings in about:config, but that has no effect, either.

    You can delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

  • Ipod classic 7th gen. Songs are not showing on ipod but they are on it ( Got the new itunes) Is the new itunes not compatible with ipod

    I got a ipod classic 7 th generation. I put songs on it ( and it shows  on my mac that the songs are on the ipod (Songs from cd's) when I disconnect my ipod the songs are not showing on the ipod (but they on it) except one song that I purchased on itunes (this songs shows on the ipod)  I got the new itunes and OS X Lion 10.8.5 on my Mac. Is the new itunes are not compatible with the ipod classic 7th generation?
    please I need help.
    THank you so much

    No backup is not good.
    You can transfer itunes purchases from an ipod.  File>Transfer Purchases

  • Web pages are not automatically published. First they are saved as drafts with a .new extension.

    Hi,
    I am curently using adobe CS3. I am facing this strange
    problem where my web pages are being saved with a .new extension
    when I am tryign to publish. Everytime I need to go and change the
    extension from .cfm.new to .cfm inorder to see the changes made to
    the web page. I have even enabled the option so that contribute
    does not send the page for reviewing before publsihing. Even after
    enabling it I am facine the same problem. And this problem is being
    faced by everyone who has publishing rights including the admin.
    Can anyone please suggest a way to get rid of the .new extension
    after publishing.
    Your help will be greatly appreciated.
    Thanks!

    We, too, are having this problem.  I see two posts in 2008-07 reporting this, but no answers and nothing via Google.
    Details:
    1. The web server is a Red Hat Linux / Apache.
    2. It seems site-wide:  several department webmasters have reported the problem.  It may be limited to webs that are using Contribute and check-in/check-out.
    3. The only thing I can think might be causing it is that our NTP daemon is broken, and the time of day drifted ~6 minutes (I have since reset the clock by hand).

  • Temporary tables are not working in MSSQL as they are in Mysql

    Hi,
    I have migrated DB from mysql from MS-SQL Server. I have used temporary tables in the query.
    I am creating a temporary table at runtime and using them in successive queries for joins.
    Following is the syntax.
    <small></small>
    if object_id('tempdb..##tbl_temp_csuid') is not null
    BEGIN
    DROP TABLE ##tbl_temp_csuid
    END;
    SELECT DISTINCT u2.csuid,u2.firstname INTO ##tbl_temp_csuid
    FROM users u2
    INNER JOIN users_cache uc on uc.id = u2.id
    INNER JOIN users u1 on uc.ownerid = u1.id
    This is working but not getting dropped when session is completed.
    I have tried by adding # to the table name, but in that way it is lost for the next query..
    Is there any solution for this..?
    I want temporary table to persist for php session.
     Thanks in advance for any help..!
    <small></small>
    <small></small>

    Ideally, you want the session from where you query your temptable be the same as the session that created the table table. If you achieve that, then local #temptables will work for you. Since you are saying that the temp table isn't available when you query
    it, then obviously this is a different session. This is where I would start. Perhaps there's a setting in your programming environment to keep sessions from when you created the temp table and when you query it.
    A global ##temptable will be destroyed when the creating session is terminated (or when a session is being put into a connection pool, using sp_reset_connection, I believe). So if you aren't seeing global temptables being destroyed, then again you need to
    troubleshoot the session handling from your programming environment.
    Tibor Karaszi, SQL Server MVP |
    web | blog

  • I am on an iPad and can't tex my mates as it says that they are not registered and I know they are. I am in Australia and they are in Canada. Please help

    I thought it was an issue between my son and I but I just tried someone else and it also doesn't work. So???PLEASE HELP!! Thank You. I am using the latest iPad - the 3? And aim trying to contact iPhone 3 users and iPod users.

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • Pictures on event are not showing but I know they are there, but where?

    I have uploaded picturesfrom camera to imac.  Deleted pictures from camera.  Then see at the event, and it only shows 15 pictures.  I hit on one and kept moving with arrow to the right to see the rest and found that there are a lot more that DO NOT show in this event or any of the ones imported.  These pictures were in the camera but do not show unless I hit the event to show pictures individually.  How can I get the event to show me all the pictures it has?  Where are these photyos then?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Thunderbird is extremely slow in loading incoming messages. If all are not read in current session, they are reloaded in next session.

    See question

    Check this:
    * Do you compact your inbox? Deleted mails are still in the mailbox (which is one big file) just marked deleted until you compact.
    * Does your virus-protection scan the whole inbox every time a new mail arrives? What would happened if there was a virus? Would the entire inbox be quarantined? A reason to keep inbox small and compacted. Move files to other mailboxes. Exclude your mail-folders from scanning.

  • Photos shown in the Package Contents are not visible in iPhoto.

    I am using iPhoto '08 (7.1.5 (378)) and have suddenly found that the last 3 years worth of photos are not displayed in iPhoto while they are still visible in the Package Contents (using Finder).  The folders (with event and image content) for 2012 through part 2009 are in Originals, Modified and Data but do not get picked up by the iPhoto application.  I have backups upto April 2011 i.e. no backups for a considerable number of photos since April 2011.
    I have searched previous discussions whereupon I have tried using the re-build option in iPhoto Library Manager (it re-builds with the photos missing) and all the re-build options available when launching iPhoto with the Option+Command keys pressed (with seemingly very little activity).
    Has anyone had this problem? Have I missed a relevant discussion?  Does anyone know how I can re-instate my missing photos and events in iPhoto?
    Thank you in anticipation.
    Martin

    When you repaired the libary did you check the option ot recover orphane3d photos in the iPhoto Library folder along with rebuilding the database file and repairing file permissions and?
    If that doesn't help the try the following:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Welcome to Apple Communities
    Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

  • Goods are not visible on the Web Shop main page (RUMP UP)

    Hi colleagues.
    Help please anybody :)
    There was the problem with the goods in Web Shop.
    Goods are not visible on the page Web Shop.
    Below you can see actions performed by us and Prerequisites:
    1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
    2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
    3. Manually created root node in Product Catalogs table in MDM
    4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
    5. Fill another necessary fields in Product Catalog module in WCEM.
    6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
    7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
    More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
    Best regardn,
    Andrey

    Hi Denis
    Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
    Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
    But on the WebChannel web shop page this products are not visible.
    I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
    According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
    But this role does not exist in the system (SAP MDM, SAP NW).
    Please give me advice about this.

  • Web Part is not visible in Web Part gallary

    Hi,
    I have developed a project in sharepoint having two web parts inside it.
    Initially, when there was only one web part in my project it was working fine. But suddenly when i added a new web part, it is not showing me web parts in a gallary. Event it is not available in web part list under Web Designer Gallaries.
    I tried with old .wsp to deployed, but still the same problem.
    On my development machine it is working with two web parts very good. but when i try to deploy that wsp on production site, it is not showing me anything in web part gallary while it was when i was working with one web part only in my project.
    Please, direct me where i am doing wrong, any possibilities?
    I did workarounds as
    1.  Check for the custom webpart feature folder under 14\TEMPLATE\FEATURES ----- Yes it exists there
    2. If the feature Scope is Site
    3. The webpart dll is deployed to GAC with Stsadm command
    4. No web part(My Custom) found here Site Action > Site Settings > Galleries > Web Parts

    in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
    Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
    I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
    As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
    please tell me what could be another workaround. 
     

Maybe you are looking for