Partition property VALUES_LESS_THAN error in OMBPLUS
Hallo we have the problem with owb 10.1 (client 10.1.0.2.0 repos. 10.1.0.1.0)
When i try make the partitions with ombplus i get the error about not valid property VALUES_LESS_THAN (the same error for VALUE_LESS_THAN and DATE_LESS_THAN). Look at script below:
Connected.
OMB+> OMBCC 'CDW'
Context changed.
OMB+> OMBCC 'DM'
Context changed.
OMB+> OMBALTER CUBE_TABLE 'DM_INVOICE' \
ADD PARTITION_KEY 'ACTUAL_DATETIME' SET PROPERTIES (TYPE) VALUES ('RANGE')Cube DM_INVOICE altered.
OMB+> OMBALTER CUBE_TABLE 'DM_INVOICE' \
ADD PARTITION 'DM_ROM_LOW' SET PROPERTIES (VALUES_LESS_THAN) VALUES ('to_date(''20040101'',''yyyymmdd'')') \
ADD PARTITION 'DM_ROM_200401' SET PROPERTIES (VALUES_LESS_THAN) VALUES ('to_date(''20040201'',''yyyymmdd'')')
OMB01752: property VALUES_LESS_THAN is not valid PARTITION property.
If i try OMBRETRIVE for partition property (made in OWB) i get the same message
OMB+>
OMB+> OMBRETRIEVE CUBE_TABLE 'DM_CURRFLIGHT' PARTITION 'DWH_CFL_ROM' GET PROPE
RTIES (VALUES_LESS_THAN)
OMB01752: property VALUES_LESS_THAN is not valid PARTITION property.OMB+>
What i can to do? is't work around. Patch?
regards,
Roman
Hi, see bug 3876177 (solved in OWB release 10.1.0.3 )
Similar Messages
-
Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
ThanksStep by step, how did you arrive at seeing this agreement?
-
No partitions found ! error while deploying a soa composite from jdev
Hi,
I have an issue while deploying a composite from Jdev.
After selecting the server I am getting "No partitions found!" error in the SOA Servers step of the Deployment.
Followed this link ( Re: JDev PS2 (10.3.3) can't deploy SOA to WLS PS1 (10.3.2): No partititions! and changed the listen address from blank to localhost but still the issue persists.
The versions which we are using is
SOA suite version - 11.1.1.3
jdev version - 11.1.1.3.0
Please do let me know if anyone has any idea on this issue.
Thanks and Regards,
KaavyaHi Kaavya,
Make sure that hosts (C:\Windows\System32\drivers\etc\hosts) file has the entry for localhost -
127.0.0.1 localhostRegards,
Anuj -
I am getting this error message when I sign my documents. Especially when I try and create a second or third signature on a document.
I have just upgraded to Reader11.0.09 and then when I got the error, I went back to Reader 11.0.08 and then back to Reader 11.0.07 but all are giving the error. The document gets signed but a pop up box shows the "Timestamp signature property generation error: verification error"
I have the settings pointing to our timestamp server under Preferences > Document Timestamping > Server Settings.
Under signature verification preferences > Verification > Verification time, I have the "Secure time (timestamp) embedded in the signature" selected.
It seems to work but is generating the error. If I open a new document and sign it sometimes it works without the error. Occasionally it produces the error on first signing. Mostly on second and third signatures on the page..
Any ideas?you can mail me directly to [email protected], and I'll try to help.
no guarenty :-)
Tal
[email protected] -
Urgent: Servlets -- property change error
I am new to Servlets and I have the following problem
I installed web logic server 5.1 on win 98, the installation was successful and the web server is up and running.
I wrote a small servlet and saved in the weblogic/myserver/servletclasses directory.
I started the server console and tried to load the Servlet and got the following error:
Property change error for property "Load"
Unable to load servlet.
Please help me resolving this issue.
Please let me know if I need to set some properties.
Thanks
Basically how can I get the property change to run only after the app is visible?Add the PropertyChangeListener to the tabbed pane after the JFrame is visible.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided. -
Partition failed with error input output
Hi All,
I installed a new hard drive (WD 500G) into my 2006 Macbook, Mac OS X 10.4.10. I also increased the RAM to 2G. My Macbook reconized the hard drive. However, I followed the steps below to format the HD, but got the partition failed with error input output msg.
1. Went to Disk Utility, selected the name of new hard drive in the sidebar.
2. Select the Partition tab, and selected 1 partition from the drop down menu.
3. Click Options, then choose GUID .
4. Select Partition
In previous posts someone suggested updating the softward to 10.4.11 or the erasing the HD, but erasing the hard drive would take 13 hours according to my Macbook. Any suggestions? Please Help!The error usually means the drive is bad. But you can try this:
Erase and Install OS X
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Install OS X. -
Revision: 13531
Revision: 13531
Author: [email protected]
Date: 2010-01-15 12:50:59 -0800 (Fri, 15 Jan 2010)
Log Message:
Fixed invalid property reference error reporting by postponing the
validation until prelink when the MxmlDocument's type is available.
QE notes:
Doc notes:
Bugs: SDK-22995, SDK-24738
Reviewer: Gaurav, Darrell
Tests run: checkintests, mxmlcunit
Is noteworthy for integration: no
Code-level description of changes:
modules/compiler/src/java/flex2/compiler_en.properties
Renamed css.StyleDef.InvalidPropertyReference to
css.StylesContainer.InvalidPropertyReference.
modules/compiler/src/java/flex2/compiler/css/StyleDef.java
Removed InvalidPropertyReference checking from processReference().
modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
Modified setMxmlDocument() to store a reference to it's QName.
Modified validate() to iterate over all style properties and to
call validatePropertyReferences() if mxmlDocumentQName is not
null.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22995
http://bugs.adobe.com/jira/browse/SDK-24738
Modified Paths:
flex/sdk/branches/4.0.0/modules/compiler/src/java/flex2/compiler/css/StyleDef.java
flex/sdk/branches/4.0.0/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
flex/sdk/branches/4.0.0/modules/compiler/src/java/flex2/compiler_en.propertiesHi
yes, I had the same issue and I found a solution.
You need to request a patch for BUG 9212862 (already corrected in WLS 10.3.3) and do the follwing:
javax.xml.ws.BindingProvider provider = (javax.xml.ws.BindingProvider)port;
java.util.Map context = provider.getRequestContext();
context.put(weblogic.wsee.jaxrpc.WLStub.POLICY_COMPATIBILITY_PREFERENCE, weblogic.wsee.jaxrpc.WLStub.POLICY_COMPATIBILITY_MSFT);
This will cause the SecurityMessageArchitect class of WLS to not send the SecurityTokenReference in the Soap security header.
Please note that is evidently a non-comformity to the specs of microsoft:
Please give a look at
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0.pdf (8.3 Signing Tokens)
and also at:
http://www.oasis-open.org/committees/download.php/16768/wss-v1.1-spec-os-SAMLTokenProfile.pdf
(3.4 Identifying and Referencing Security Tokens)
A SAML key identifier reference MUST be used for all (local and remote) references to SAML 1.1
assertions. [...]
All conformant implementations MUST be able to process SAML assertion references occurring in a
<wsse:Security> header or in a header element other than a signature to acquire the corresponding
assertion. A conformant implementation MUST be able to process any such reference independent of the
confirmation method of the referenced assertion.
It follows that the .NET 3.5 is a non conformat implementation: I would gladly know which is the position of Microsoft on that.
ciao
carlo -
Partitioned nested table error while dropping one partition
All,
I created a partitioned table which is also a nested table as you can see below. I got FK constraint error while attempting to drop a partition, however, I could not find the FK in order to disable it since it's underlying table emp_list_p which is not visiable to applications. How could I drop the partition in this case?
Thanks,
Jianhui
SQL>desc emp_t
Name Null? Type
ENO NUMBER
ENAME VARCHAR2(30)
SAL NUMBER
SQL>desc emp_list_t
emp_list_t TABLE OF EMP_T
Name Null? Type
ENO NUMBER
ENAME VARCHAR2(30)
SAL NUMBER
SQL>l
1 create table dept_p
2 (dno number,
3 dname varchar2(30),
4 emplist emp_list_t )
5 NESTED TABLE emplist store as emp_list_p
6 partition by range (dno)
7 (
8 partition p1 values less than (2),
9 partition p2 values less than (3)
10* )
SQL>/
Table created.
SQL>insert into dept_p (select * from dept);
2 rows created.
SQL>select * from dept_p;
DNO DNAME
EMPLIST(ENO, ENAME, SAL)
1 HR
EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000))
2 SALES
EMP_LIST_T(EMP_T(3, 'frank', 800))
2 rows selected.
SQL>alter table dept_p drop partition p1;
alter table dept_p drop partition p1
ERROR at line 1:
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
SQL>l
1 select constraint_name, constraint_type, table_name
2 from user_constraints
3 where r_constraint_name=(select constraint_name
4* from user_constraints where table_name='DEPT_P' and constraint_type in ('P','U'))
SQL>/
no rows selectedSQL> create type emp_t as object(
2 ENO NUMBER,
3 ENAME VARCHAR2(30),
4 SAL NUMBER)
5 /
Type created.
SQL> create type emp_list_t as table of emp_t;
2 /
Type created.
SQL> desc emp_list_t
emp_list_t TABLE OF EMP_T
Name Null? Type
ENO NUMBER
ENAME VARCHAR2(30)
SAL NUMBER
SQL> create table dept_p
2 (dno number,
3 dname varchar2(30),
4 emplist emp_list_t )
5 NESTED TABLE emplist store as emp_list_p
6 partition by range (dno)
7 (
8 partition p1 values less than (2),
9 partition p2 values less than (3)
10 )
11 /
Table created.
SQL> insert into dept_p values(1, 'HR',
2 EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000)));
1 row created.
SQL>
SQL> insert into dept_p values(2, 'SALES',EMP_LIST_T(EMP_T(3, 'frank', 800)));
1 row created.
SQL> select * from dept_p;
DNO DNAME
EMPLIST(ENO, ENAME, SAL)
1 HR
EMP_LIST_T(EMP_T(1, 'scott', 1000), EMP_T(2, 'brain', 2000))
2 SALES
EMP_LIST_T(EMP_T(3, 'frank', 800))
SQL> alter table dept_p drop partition p1;
alter table dept_p drop partition p1
ERROR at line 1:
ORA-02266: unique/primary keys in table referenced by enabled foreign keys
SQL> select constraint_name,table_name,constraint_type from user_constraints
2 where table_name = 'DEPT_P';
CONSTRAINT_NAME TABLE_NAME C
SYS_C008224 DEPT_P U
SQL> select index_name from user_constraints
2 where table_name = 'DEPT_P';
INDEX_NAME
SYS_C008224
SQL> select index_name,column_name from user_ind_columns
2 where index_name = 'SYS_C008224';
INDEX_NAME COLUMN_NAME
SYS_C008224 EMPLIST
SQL>
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
If you look closely, there is a unique index on dept_p. Oracle does not advertise it.
One of the options is that you may have to delete the rows in the partition first,
then drop the partition. -
Ok, so I recently bought a Windows 8 System Builder DVD from Amazon to install Windows 8 via Bootcamp on my Late 2011 13" Macbook Pro. I had previously downloaded the drivers onto an 8 GB FAT formatted flash drive. When I went to partition my disk, I received an error message something similar to the one in the title. This is really important. Can anyone help?
The exact and complete error message would help. But you likely have an external drive connected or you have multiple internal drives. Disconnect all usb external devices then try again.
or, since you did not provide the exact error message, maybe you do not have enough contiguous free disk space to create the partition. -
Disk Utility - Solution for a Weird MediaKit Partition "too small" Error
I found a very suggestive article, could be a silver bullet for this kind of problem.
*http://ubuntuforums.org/showthread.php?t=760190*
+*quote from SWedd*+
+In my case, it was caused by the Apple_Bootstrap partition (created during Ubuntu install), of format unknown to OSX. This partition was positioned right after my Macintosh_HD partition. To enlarge my Macintosh_HD I needed to use diskutil to erase the Apple_Bootstrap partition to a blank "MS-DOS" partition. Then I could use Disk Utility to Delete the MS-DOS partition. After that I could resize my Macintosh_HD freely.+
In my understanding, if you failed to increase the size of a certain partition, it might mean a partition just after that partition is corrupted or broken (whether or not it is corrupted, you can know it by using command "diskutil info ...").
With command "diskutil eraseVolume ..." you can erase the partition in question, then with "diskutil mergePartitions ..." merge the partition you want to increase in size and the partition you just erased. Now you can increase the size without any error.
Anyway, diskutil can do several things which Disk Utility can't do.
To resort to diskutil is sure worthwhile.
Message was edited by: ShigerelloWelcome to the Apple forums and thanks for the information.
Warning:
The terminal command
diskutil
should be used with care, as with most terminal commands.
A good rule to remember is "If you do not know what something will do, do not do it."
For information on diskutil, in a terminal enter
man diskutil -
Windows copied files to partition, now Disk Error all the time...
Hi all,
I have installed Windows XP SP2 before (using this disk) on a Mac using Boot Camp but this is refusing to read the files Windows Installer placed on the BootCamp partition, so it can't finish the installation. Merged it back, did the whole thing again for the same result.
"Disk Error
Press any key to restart"
of course pressing keys does nothing, I have to hold the power button in for 5 seconds to shut down. I can still boot up as a Mac, just the Windows side refuses to install.
Mac Mini 1.6 CoreDuo 1MB RAM Snow Leopard 10.6.1
Any ideas anyone?
with best regards,
Karn.Just tried for the 4th time, and I had to use the long winded FAT 32 format in the Windows Installer and success! The Quick version was what I used before I'm sure, but it didn't work tonight...
Working now anyway...
with best regards,
Karn. -
I have created a test for 50 measurements. This requires the property loader to read:
1 off StationGlobals.CurrentTestName
1 off StationGlobals.FailTarget
1 off StationGlobals.PassTarget
1 off Step.Comp
1 off Step.Limits.High
1 off Step.Limits.Low
Array 0f [0] to [49] of:
Step.Result.Measurement[*].Comp
Step.Result.Measurement[*].Limits.High
Step.Result.Measurement[*].Limits.Low
To test this a single block program was written. The above was entered into the property loader step. All variables pointing to the reference files and the file start and stop label are set up by local variables. The limits file was manual altered and trial values entered.
The program ran and loaded all limits successfully.
I have a large program under development that I could not get this function to work in. I copied the property loader step and limits string from the working files into the larger program. I have checked the correct variables are being passed to the property loader for the limits source file name and the Data Start and End Markers. Everything looks fine but when I run the program I get an error message saying:
Sequence File: 1065-32911_Block09_RDVS.seq
Property loader step failed to import or export properties.
153 property value(s) were found.
3 property value(s) were imported from 6 row(s) of data
I even tried copying the complete performance test across and the whole of the limits section for that performance test too. It still won’t work.
Also, what does the error message
3 property value(s) were imported from 6 row(s) of data
actually mean anyway?
I've attached a text file with the individual linits test text.
Attachments:
Multilim.txt 6 KBBrianM,
It seems that the properties does not exist in your current context.
'Rows of data' means the number of lines in your text file within the data markers.
Is the error message you are providing complete?
Did you copy the message from the Run-Time error dialog?.
Make sure you have the same steps you had originally and that the steps contains tha same properties (measurements).
In this case you should aways have a step called 'Test Multiple Numeric' containing 50 measurements.
It is very importatnt that the step name is the same.
It seems to me that the step is only being able to import the station globals.
You can verify it by ignoring the error and checking the station globals values after the step executes.
Hope it helps.
If you have any question let me know.
Antonio Lie.
Message Edited by Antonio Lie (NI) on 04-12-2006 12:46 PM -
Windows failed to publish property printBinNames - error 8007200d
Just like this old post (http://social.technet.microsoft.com/Forums/windowsserver/en-US/c9a445e2-b28f-4e57-bfef-c1a2f89b8cd6/printers-not-being-published-in-active-directory) I'm noticing some issues with printers being published to AD. However
the error code I'm seeing is 8007200d.
Q:\>err 8007200d
# as an HRESULT: Severity: FAILURE (1), Facility: 0x7, Code 0x200d
# for hex 0x200d / decimal 8205 :
ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS winerror.h
# The specified directory service attribute or value already
# exists.
# 1 matches found for "8007200d"
An example of the event which only has fired for this specific printer. It
IS published in AD however and can be found with the Find Network Printer wizard. It's been on this print server for well over a year too.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 9/13/2013 10:47:07 AM
Event ID: 322
Task Category: Publishing a printer in the Active Directory
Level: Error
Keywords: Active Directory,Classic Spooler Event
User: SYSTEM
Computer: PrintServer.MYDOMAIN.COM
Description:
While attempting to publish the printer to the Active Directory directory service, Windows failed to publish property printBinNames at LDAP://its-ad-a1.MYDOMAIN.COM/CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MYDOMAIN,DC=org. Error: 8007200d
Using ldifde I queried AD to find out what it has about this specific printer:
ldifde -s its-ad-a1.ABC.MyDomain.org -r objectclass=printqueue -d "CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org" -f test2.txt
Oddly enough, there is no printBinNames in the output:
dn: CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org
changetype: add
objectClass: top
objectClass: leaf
objectClass: connectionPoint
objectClass: printQueue
cn: PrintServer-AA-BB-4SE-COLOR-FXLSR
description: 172.28.30.26, HP CM1415fnw
distinguishedName:
CN=PrintServer-AA-BB-4SE-COLOR-FXLSR,CN=PrintServer,OU=Level5,OU=Servers,OU=
ManagedObjects,DC=ABC,DC=MyDomain,DC=org
instanceType: 4
whenCreated: 20130911233154.0Z
whenChanged: 20130911233204.0Z
uSNCreated: 629573861
uSNChanged: 629573861
name: PrintServer-AA-BB-4SE-COLOR-FXLSR
objectGUID:: b51qMLuOCUmGgwWkBWarAg==
flags: 0
uNCName: \\PrintServer.ABC.MyDomain.org\AA-BB-4SE-COLOR-FXLSR
versionNumber: 4
location: XXX
serverName: PrintServer.ABC.MyDomain.org
portName: 172.28.30.26
driverName: HP Universal Printing PCL 6 (v5.6.5)
priority: 1
printStartTime: 60
printEndTime: 60
printMaxResolutionSupported: 600
printOrientationsSupported: LANDSCAPE
printOrientationsSupported: PORTRAIT
printCollate: TRUE
printColor: TRUE
printLanguage: PCLXL
printShareName: AA-BB-4SE-COLOR-FXLSR
printSpooling: PrintAfterSpooled
printKeepPrintedJobs: FALSE
driverVersion: 1025
printMaxXExtent: 4318
printMaxYExtent: 9144
printMinXExtent: 762
printMinYExtent: 1270
printStaplingSupported: FALSE
printMemory: 131072
printRate: 12
printRateUnit: PagesPerMinute
printMediaReady: Letter
printNumberUp: 6
printMediaSupported: Oficio 8.5x13
printMediaSupported: Custom
printMediaSupported: 16K 197x273 mm
printMediaSupported: 16K 184x260 mm
printMediaSupported: 16K 195x270 mm
printMediaSupported: 10x15cm
printMediaSupported: 5x8
printMediaSupported: 4x6
printMediaSupported: Double Japan Postcard Rotated
printMediaSupported: A6
printMediaSupported: Japanese Postcard
printMediaSupported: Envelope Monarch
printMediaSupported: Envelope B5
printMediaSupported: Envelope C5
printMediaSupported: Envelope DL
printMediaSupported: Envelope #10
printMediaSupported: B5 (JIS)
printMediaSupported: A5
printMediaSupported: A4
printMediaSupported: Executive
printMediaSupported: Legal
printMediaSupported: Letter
printerName: AA-BB-4SE-COLOR-FXLSR
printPagesPerMinute: 12
url: http://PrintServer.ABC.MyDomain.org/AA-BB-4SE-COLOR-FXLSR
objectCategory:
CN=Print-Queue,CN=Schema,CN=Configuration,DC=rootad,DC=MyDomain,DC=org
shortServerName: PrintServer
printDuplexSupported: FALSE
dSCorePropagationData: 16010101000000.0Z
Why then would Windows through EventID 322? printBinNames doesnt exist to conflict with per the error code thrown.
Even more odd is that I believe this error was preventing another newly crated printer from being published. A new printer was created on the PrintServer. But the printer would now show up in the Find network printer wizard. Right at the
same time I added this new printer, the Event ID 322 for the unrelated printer (AA-BB-4SE-COLOR-FXLSR) was logged. Odd.
I then unpublished and republished the AA-BB-4SE-COLOR-FXLSR printer. Windows logged both success and the same failure! Also interesting is the published name it used is different
9/13/2013 12:47:19 PM - The printer was successfully removed from the Active Directory directory service. Print queue CN=PrintServer-AA-BB-4SE-COLOR-FXLSR was successfully deleted from container LDAP://its-ad-a1.ABC.MyDomain.org/CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. The printer can no longer be located by searching Active Directory. No user action is required.
9/13/2013 12:47:19 PM - The printer was successfully published to the Active Directory directory service. The print queue CN=PrintServer-AA-BB-4SE-C0064222313 was successfully created in container LDAP://its-ad-a2.ABC.MyDomain.org/CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. No user action is required.
9/13/2013 12:47:19 PM - While attempting to publish the printer to the Active Directory directory service, Windows failed to publish property printBinNames at LDAP://its-ad-a2.ABC.MyDomain.org/CN=PrintServer-AA-BB-4SE-C0064222313,CN=PrintServer,OU=Level5,OU=Servers,OU=ManagedObjects,DC=ABC,DC=MyDomain,DC=org. Error: 8007200d...I did install a bunch of printing related hotfixes near the end of 1/2014, which is possibly the reason why it hasn't occurred again.
I'm seeing this too. Win2012r2 server is fully updated till 05/2014. For just newly installed printer and first time listing in AD i got:
EventViewer's PrintService->Operational says:
The printer was successfully published to the Active Directory directory service. The print queue CN=HP1320-XXX was successfully created in container LDAP://DC4.XX.XX/CN=xx,OU=XX,OU=XX,DC=XX,DC=XX. No user action is required.
EventViewer's PrintService->Admin says:
While attempting to publish the printer to the Active Directory directory service,
Windows failed to publish property printBinNames at LDAP://DC4.xx.xx/CN=xx,CN=xx,OU=xx,OU=xx,DC=xx,DC=xx. Error: 8007200d -
JVM error during OMBPlus execution
Hi,
Has anybody come across the following problem while executing OMBPlus.sh?
OMBPlus crashes with a JVM error.
JVMXM004: JVM is performing abort shutdown sequence
JVMDG217: Dump Handler is Processing a Signal - Please Wait.
JVMDG303: JVM Requesting Java core file
JVMDG304: Java core file written to /app/oracle/owb92/owb/bin/admin/javacore1491138.1127942211.txt
JVMDG215: Dump Handler has Processed Exception Signal 11.
./OMBPlus.sh[5]: 1491138 Segmentation fault(coredump)
OMBPlus was exectuing a deploy script. The database is 9.2.0.5 on AIX 5L and OWB is 9.2.0.4. The script was run successfully in DEV and QA several times, but throws up this error in PRODUCTION.
Is it something to do with memory allocation specified in OMBPlus.sh?
We also tried increasing the settings from -> -Xms64M -Xmx256M -Dlimit=256M
to -> -Xms128M Xmx512M -Dlimit=450M. But that didn't help.
Thanks,
ChethanHi,
Has anybody come across the following problem while executing OMBPlus.sh?
OMBPlus crashes with a JVM error.
JVMXM004: JVM is performing abort shutdown sequence
JVMDG217: Dump Handler is Processing a Signal - Please Wait.
JVMDG303: JVM Requesting Java core file
JVMDG304: Java core file written to /app/oracle/owb92/owb/bin/admin/javacore1491138.1127942211.txt
JVMDG215: Dump Handler has Processed Exception Signal 11.
./OMBPlus.sh[5]: 1491138 Segmentation fault(coredump)
OMBPlus was exectuing a deploy script. The database is 9.2.0.5 on AIX 5L and OWB is 9.2.0.4. The script was run successfully in DEV and QA several times, but throws up this error in PRODUCTION.
Is it something to do with memory allocation specified in OMBPlus.sh?
We also tried increasing the settings from -> -Xms64M -Xmx256M -Dlimit=256M
to -> -Xms128M Xmx512M -Dlimit=450M. But that didn't help.
Thanks,
Chethan -
Partitioning with Bootcamp Error?
I had an error while using bootcamp and trying to install windows. I had to cancel and restart my computer during the partitioning, but now all the space from the partitioning is used up and I can't access it, how do I reset it so I have the space back to my mac? I checked bootcamp, and it won't recognize the space as already hogged up, though finder won't let me use the space anymore.
Thanks for your reply, appreciate it !!
Could you please clarity it further, shoud i reboot and press and hold C or option/alt. Then under the utilities i shoud repair the disk and do the rest.
Just a little heads up here, i have done the following..
""First, start the MacBook holding Command and R keys to start into OS X Recovery, and open Disk Utility.
Then, choose the second "Macintosh HD" option you see in the sidebar and verify the disk. If it's damaged, repair the drive. Finally, restart and see if the hard drive is OK""
When i chose the second "Macintosh HD" option in the sidebar, the verify disk or repair disk options we not highlighted. I could not click on them. I have attached a snapshot of this. Also i went back to the first "Macintosh HD and verified it and repaired it as well, nothing happened, still the space is not free. Please take a look at the screenshots.
Maybe you are looking for
-
Satellite Pro C50-A - Microsoft Office 2013 apps crash when opened
I recently purchased a Satellite Pro C50-A PSCG7A-01X01V. I installed Windows 8.1 and then installed Office 2013. Unfortunately when I start one of the Office 2013 apps it immediately crashes with an error message eg: "Microsoft Word has stopped work
-
i have a date field which i extract the month and year in a formula from the date. when i place it in the report it displays with 2 decimals at the end of the month and year how do remove the decimals. month({USR_CR_ALERTHIST;1.bkdate})&" / "&year(
-
Cell Document in Reporting Studio
i saw from the user manaul that there is Cell Document in Hyperion Reporting Studio, can anyone give me some example of how it works. my assumption is that if you want to attach your comments/graphs to the end of the report, you can attach their hard
-
Tips for Client-Server project please...
I've written a few Java apps (some very simple, some not quite so simple) so far and I think I'm ready to begin tackling my big goal. I want to create a distributable client desktop application that will actually be very simple in functionality. I wa
-
I've a parallel port problem.Can anyone help me?
Hi everybody I've a problem about programming with parallel port.I tried to write a simple byte data likes "0x0D" through the OutputStream of parallel port "LPT1" but it didn't get out from the runtime process;I 've found that it has stuck at OutputS