PAS command to check model?

Hi,
is there any PAS command to check if there are errors in a PAS model. I only found the xray in the PAS help, but this command is not returning anything. i am not even sure if its suitable.
Best regards,
Eike

Hi Pedro and Bob,
i had a problem with loading a model via entry and approval. Some measures were causing PAS to stop (without any log entry or further notice). I could itentify some of the PAS measures with SEL VAR * and LIST. Some others i could find with SEL VAR [name] and the SNAPSHOT command. These measures were created with the BI Connector and based on SAP BW measures.
we could identify the corrupt PAS measures like this.
So my question is quite general. is there any PAS command which can check a model on such broken measures.
Best regards
Eike

Similar Messages

Is there an NXOS command to check to see if traffic is being dropped from traversing a Nexus vPC link?

Is there an NXOS command to check to see if traffic is being dropped from traversing a Nexus vPC link?

iTunes 11 seems to shuffle just fine for me.
You can restore much of the look & feel of the previous version with these shortcuts:
Ctrl-B to turn on the menu bar.
Ctrl-S to turn on the sidebar (your device should be listed here as before).
Ctrl-/ to turn on the status bar.
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour.
If you want to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

SQL Command to Check ABAP Support Patches and JSPM Patch

Dear all,
We have setup an DiasterRecovery System of the BI Production System .
os: aix 6.1
Database: Oracle 11.2
BUT , Our DR System is in Physical Standby mode.
Generally, we see the ABAP Patch version in SAP GUI ( System -- System status).
Likewise, Is there any SQL Command available to check the version ABAP Patches (
SAP_BASIS, SAP_ABAP, PI_Cont add on, PI_BASIS AND BW Patch - SAP_BW)
Is there any sql command to check the version of JSPM or JAVA Patch
regards,
gayathri.K

Hi Gayathri,
BUT , Our DR System is in Physical Standby mode.
Generally, we see the ABAP Patch version in SAP GUI ( System -- System status).
Likewise, Is there any SQL Command available to check the version ABAP Patches (
SAP_BASIS, SAP_ABAP, PI_Cont add on, PI_BASIS AND BW Patch - SAP_BW)
You can perform sql query on CVERS table.
For eg: Select * from <schema>.CVERS ;
This will list all the entries with all the columns from CVERS table.
Hope this helps.
Regards,
Deepak Kori

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

Looking for a command to check the filling level of the ASIC netwflow table on Cat3850

Hello.
I am searching for a command to check the filling level of the flexible netflow table in the ASIC of the Cat3850.
There is a show command on the FNF Cache which shows me any entry numbers but this values is confusing me.
The Cat3850 is able to have 16K egress and 8K ingress FNF table entries according to the FNF guide.
But the show command gives me a value of >33k.
Does anyone have an explanation on this?
How can I check the real filling Level of the FNF table in the ASIC?
Thank you very much
Karl
show flow monitor Solarwinds-OUT cache
Cache type:                               Normal (Platform cache)
Cache size:                              Unknown
Current entries:                           33256
Flows added:                              626755
Flows aged:                               560235
    - Active timeout      (    60 secs)     410932
    - Inactive timeout    (    15 secs)     149303

myle wrote:I don't want a solution with GUI because my laptop is 6 years old.
I completely agree with all the above and I only use mutt. But I use mutt because I *prefer* cli apps.
If you're just going with cli because you don't think your computer can handle gui apps ... then I don't think you've given the lightweight gui apps a fair shake.
Yes, evolution and thunderbird would suck on an old computer (but IMHO they suck on a new one too![1]).
Claws (or/aka sylpheed) is a nice little mail app that should work nicely on any computer that is running X. I'm sure there are other lightweight gui mail apps to.
Again, I love mutt. But I don't think having an old computer is the reason to favor mutt over a good gui app if you would otherwise prefer the latter.
[1]: Not meant as a flame, rather an expression of my preference for software that does one thing and does it well. These tools both, while they may be well written, try to do so much that I have never been pleased with the outcome.
Last edited by Trilby (2012-08-14 11:57:35)

Is there any command to check the status of CWAI?

I want to check if CWAI is currently on or off (start or reset or stop). Is there any convenient command to check?

Hello
You can check up on the CWAIReadSpec which has a read only property called AcquisitionState. Check out the following following KB about how to use this object.
Using the ComponentWorks AIReadSpec object in Visual C++
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/4a44123c8de6bc2d862565e6006d3d24?OpenDocument
And you can check out the function details in the Measurement Studio Help
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

What is the command to check the changes in the spanning-tree topology?

What is the command to check the changes in the spanning-tree topology?

Hi,
Few commands which would help are:
1- Show spanning-tree detail
2-show spanning-tree detail | in ieee|from|occur|is exec >> This will give from were the changes occuring- Ex:
C6K1#show spanning-tree detail | in ieee|from|occur|is exec
VLAN0001 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 9536 last change occurred 00:00:29 ago
from GigabitEthernet4/6
3- show spanning-tree active *& show spanning-tree root >> Will give you the root information.
4- show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
STP running MST:
===============
show spanning-tree mst configuration >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
show spanning-tree mst detail
show spanning-tree mst <name of the region>
Debug on STP:
============
debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
HTH
Inayath
*Plz rate if this info is usefull.

Command to check active radius server in the pool

Hi,
Is there a command on WLC to check the current active radius server in the list?
I have configured multiple radius servers and noticed in the logs the radius servers were often deactived and activated. I would like to see which is the current active radius server for a WLAN.
Thanks

There isn't a command to check. You could enable fallback or just see the log on which server was the last one to be deactivated.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008098987e.shtml
Sent from Cisco Technical Support iPhone App

CUBE, command to check CUBE version?

Hi,
Any command to check the CUBE version? I know IOS 15.1.4M is CUBE version 8.7,,,, but I want to know check the exact version via command.
Advice please,

Be careful about using the -r switch:
# sbin/reconstruct user/kellyc/iNBox
user/kellyc/iNBox
# sbin/reconstruct user/kellyc/inbox
user/kellyc/inbox
# sbin/reconstruct user/kellyc
user/kellyc
user/kellyc: Invalid mailbox name
# sbin/reconstruct user/kellyc/xyzzyasdfadsfasdf
user/kellyc/xyzzyasdfadsfasdf
ERROR: Can't open mailbox :user/kellyc/xyzzyasdfadsfasdf:
Reconstructing...
user/kellyc/xyzzyasdfadsfasdf: Mailbox does not exist
# sbin/reconstruct -r user/kellyc/xyzzyasdfadsfasdf
#The reconstruct command has gotten better about letting you know if you specified an invalid or nonexistent folder when you tell it to work on one specific folder.
But when you use the -r switch to tell it to do all the subordinate folders of the pattern you specify, then a nonexistent folder is signified by reconstruct displaying an empty list of folders it worked on.
As Shane said, it should always give you some output. If it gives no output -- just the shell prompt -- it did not do anything.

Does Pacman Have A Command To Check For Left Over Dependencies?

Does pacman have a command to check for left over dependencies?
I know that when you remove something it's checking for dependencies and I've seen it show these before, but I swear I removed something that had dependencies and it don't show any and just removed only the single program.
So basically I wanted to know if there are any pacman cmds like this to check the system with and clean it up?
THANKS
P.S. I didn't notice anything like this in the Wiki, only for cleaning out the cache....

jasonwryan wrote:
DasFox wrote:One I was reading the Wiki and I overlooked the information.
I saw no evidence of that: you might have mentioned it in your post...
Also I'm not your noob or your boy, I'm a middle age man that's been using Linux 10 years, running a Slack box most packages and kernel all custom compiled only running OpenBox...
So next time you want to start telling people to do the basic research before posting, stop and think that maybe they've done it already.
Again, there was no evidence of you having done any research: without evidence there is no reason to assume what the observed behaviour contradicts...
So I've RTFM, just be careful with your choice of words and attitude, being the MOD doesn't give you rights to SPIT on people!
Your perception about being insulted is your own - my post contains nothing insulting or offensive, just a very clear answer to your question.
P.S. And if you were being nice in your odd sort of way I also don't appreciate it, because when we gone out and done the research and overlooked something we have every right to come here and ask and not be told like you've done.
You have every right to ask questions; we have every right to insist that you follow the Forum Etiquette when doing so: https://wiki.archlinux.org/index.php/Fo … ow_to_Post
No you didn't reply which you could of simply done, or asked if I read the Wiki which would of been the proper thing, not telling me to RTFM!
I'm like this at times because I've seen it all to often....
Next time before telling someone, ask them, in case they forget to mention it to you...
Anyhow let's move on....
P.S. So I can remove those packages without a problem?
Last edited by DasFox (2010-11-26 06:16:08)

RMAN's commands to check the datafiles for any sort of corruptions

what are RMAN's commands to check the datafiles for any sort of corruptions

RMAN is check database or backups here? i think its checking backups? and
You mean to say that its not checking the datafiles but the backup of them for corruption is it?If this is what you meant than I guess you haven't read teh link that I referred.From there,
When performing a BACKUP... VALIDATE, RMAN reads the files to be backed up in their entirety, as it would during a real backup. It does not, however, actually produce any backup sets or image copies.This command wont check the backups and neither its taking a backup.Its checking it for corruptions.
[i]
RMAN>backup validate database ;
not working when db is in no-archivelog mode
Are you trying to run it in the open stage ? If you are in Noarchive mode, you can't run backup related commands in open stage.Run it in the mount stage.
Aman....

Je n'arrive pas à commander un livre photo de 100 pages sur iPhoto. L'assemblage se fait bien mais pas l'envoi.

Je n'arrive pas à commander un livre photo de 100 pages sur iPhoto. L'assemblage se fait bien mais pas l'envoi.

Google translation:
I can not order a photo book of 100 pages on iPhoto. The assembly is fine but not sending.
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there. Be sure to create a PDF file of the book as described in this Apple Document, iPhoto, Aperture: Previewing an order in iPhoto or Aperture, and preview it for errors before ordering. Keep it to compare with the printed copy when it arrives.
OT

ASR9001: Command to check Cluster Link status

Hi there,
Does anyone know of a command to check the cluster link status as well as SFP information (i.e. PID, serial, etc.)?
Also, the documentation on Cisco seems to use EOBC port and cluster link port interchangeably. Are these referring to the same thing?
Thank you,
George

Hi George,
SFP info such as serial can be found under 'show inventory'
NAME: "module mau ControlEthernet0/RSP1/CPU0/S0/12", DESCR: "1000BASE-LX/LH SFP (DOM), SMF 10Km, MMF 550m"
PID: SFP-GE-L           , VID: V01, SN: XXXXXXXXXXXXX
Checking the nV edge EOBC (control) links can be done with the following commands:
'show nv edge control swtich-ports-status brief loc '
'show nv edge control control-link-protocols loc '
'show nv edge control control-link-sfp [0|1|all] loc '
The first command simply lists if the port at that second is up. Typically this would be the following ports (different ports on various chassis)
        12             SFP+_00_10GE: up
        13             SFP+_01_10GE: up
The second commands provides a bit more detail.
Key things to look at / what we should see:
Port enable administrative configuration setting: Enabled
Port enable operational state: Enabled
Current bidirectional state: Bidirectional
Current operational state: Advertisement - Single neighbor detected
CLM Table version is x (if this number is high / increasing then a link is flapping)
The final command some additional information. The following are some of the more important things to check
port                                     : 0x00000000 (0) <-0 or 1
SFP Plugged in                           : 0x00000001 (1) <-1 is true
SFP Rx LOS                               : 0x00000000 (0)<- We want 0
SFP Tx Fault                             : 0x00000000 (0) <-We want 0
SFP Tx Enabled                           : 0x00000001 (1)<-We want 1
HTH,
Sam

Je n'arrive pas à commander des tirages de calendrier! L'ordinateur me dit:

Aidez-moi!
Je n'arrive pas à commander mes calendriers de Noël!
L'ordinateur m'écrit: "Une erreur est survenue lors de la communication avec l'Apple Store en ligne. Veuillez réessayer."
Est-ce que le problème vient d'Apple ou de moi???

1 -
Before ordering your book preview it using this method -http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered calendar will match it.
2 - make sure your internet is working correctly
3 - try again later
4 - boot into safe mode and try again
LN

Command to check if the system requires a reboot

Hey,
Pretty self explanatory. I just want to know if there's a command that checks if a reboot is needed.
I've Googled for this and the few results I've gotten are for Ubuntu/RHEL.
Thanks.

I grepped my pacman log and there's only 5 instances of the word "reboot" in the ~2 years this installation has lasted. As it is, this isn't suited for monitoring purposes.
Also, I checked the forums. Unless I'm missing something, the threads that talk about anything remotely similar are mostly to do with troubleshooting/"How often do you reboot?".
I think the question is still valid. Is there a command that checks to see if a reboot is required? To rephrase, does a kernel (module) upgrade touch a file/variable somewhere that can be checked?
Edit: Yeah. I thought about scripting this. Seemed a little excessive at the time though. I guess that's where I'll go. Thanks.
Last edited by BasioMeusPuga (2013-11-27 14:19:08)

PAS command to check model?

Similar Messages

Maybe you are looking for