Pass parameter from iView to AbstractPortalComponent
Dear All,
I have an iView (PAR iView) which invokes an AbstractPortalComponent. Is there any way by which I can
pass parameters to the AbstractPortalComponent?
Kind regards,
Sreejesh.
Hi,
When ever you are invoking the Abstract Portal Component ,you would be passing the url.
The url can be appended with parameters as follows.
url?p1=v1&p2=v2,,where p1 and p2 are the parameters.
If you are directly calling the component from the Iview ,let us say in a new window, then you would write
this in a javascript function
<b>window.open('par.componentname')</b>
or you can use EPCM.doNavigate('target')
where target is the pcd path for the iview.I am not sure if the parameters can be appended in the same manner to the target,as shown above for url.
In the code of your abstract portal component,
you can write
IPortalComponentRequest request = (Iportal ComponentRequest) this.getRequest();
String parameter = request.getParameter("p1");
Regards,
Harish
(Please award points for helpful answers)
Similar Messages
-
Passing parameter from Iview to SAP WD ABAP application
Hi All,
Can we pass single / multiple parameter(s) from the Iview to the Webdynpro Component ? I mean we are calling a WD Component by executing its application from the Iview. In that process, is there a way we can send some parameters to the WD component from the Iview ? If yes, please let me know how.
Thanks and Regards,
Sayan GhoshHi Sayan,
It is possible to pass parameters from portal Iview to WD component. For that there is one property of Iview called
Application Parameters
You can pass value like this:
parameter1=value1 ¶meter2=value2
Regards,
Vikrant Trivedi -
How to pass parameter from 1 stored procedure to another stored procedure inside crystal report
Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
ChiHi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat. -
How to pass parameter from form6i to report6i
when i passed parameter from form6i to report6i, while previewing report the data was not displaying only fields heading was displaying, but in report6i there is a parameter form thru that it was displaying data, but thru form6i to report6i it was not. Please kindly help me and give me the some sample or example of it.
Thanks
Best regards
ZaheerADD_PARAMETER(pl_id,'P_SCRIPT',TEXT_PARAMETER,:b1.script);
-
Master-detail relationship - passing parameter from form to form
Hello.
I have a question about master detail relationship.
In first form we have master-detail relationship.
Example on dept, emp tables:
We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Tasks table (detail) can have many records for one employee.
Tasks table is in another form, which is called with call_form built_in. So we pass a parameter from master to detail - parameter empno. Because of that, we can only see tasks for one employee and can't navigate to another employee. This is normal.
Now comes the question.
Is it possible to call a form (with tasks table) with deptno parameter (so we can navigate through all employees with that department), but first show employee that was last used in first form?
Example of our goal.
Master: deptno = 20
Detail: navigate to JONES employee
Call new form (tasks)
Tasks for JONES employee are first shown
Can navigate to another employee - without requery
Is this possible?
If we pass deptno parameter, we can navigate through all employees - but must navigate to the employee we last used in first form.
If we pass empno parameter to second form, we see last used employee but cannot navigate to another employee without requery.
Hope you understand my problem.
Thanks.Hi
yes you can pass parameter from one form to another.
In your master detail form set the trigger when-new-instance and there define the global variable like
:GLOBAL.G_CIRCLE_ID := NULL;
and in your task table set the trigger when-new-instance and there define the global variable like and also write this code
:GLOBAL.G_DIVISION_ID := NULL;
IF :GLOBAL.G_CIRCLE_ID IS NOT NULL THEN
GO_BLOCK('DIVISION');
SET_BLOCK_PROPERTY('DIVISION',DEFAULT_WHERE,'CIRCLE_ID ='||''''||:GLOBAL.G_CIRCLE_ID||'''');
EXECUTE_QUERY;
END IF;
:GLOBAL.G_CIRCLE_ID := NULL;
now you maintain your trigger according your need.
Regards, -
Problem while passing parameter from report to report.
Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regardsHi
I got the solution.
I forgot to add %* at end of the KEY value. -
How can I pass parameter from report to form?
Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters -
How to Pass Parameter from BIP to Dashboard Report
Hi,
Parameter from BIP to Dashboard Report
If I select BIP report paremeter should pass value to dashboard report
thanks in advance.
CHEERS ,
JelHi Saichand,
I hav gone through above link its passing values from Dashboard prompt to BIP report only..
just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
Thanks in advance
Cheers,
Jel -
Hw to pass parameter from report to forms
Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
ChandanHi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan -
Passing Parameter from URL to Web Forms - Oracle 10 Application Server
Hi All -
I want to pass parameter from a URL to 10g Oracle Web Forms - Oracle Application Server 10.1.2
http://server1/forms/frmservlet?config=SATWEB_SSO&otherparams=username_sso=BABUS
How to receive this 'username_sso' value inside my forms application ?
Created a Parameter in the same name as URL parameter 'username_sso' in forms but didn't receive the value. I want to know how to receive the value of this parameter within forms from URL.
Thanks - SureshTry this,
1. Create a parameter in the formsweb.cfg (say username_sso) under default section ( or you can create it in your own config section)
2. Add the username_sso in otherparams parameter as username_sso=%username_sso%
3. Add this username_sso parameter in your form.
4. Run the form as
http://<machine>:<port>.....?form=blahblah....&otherparams=username_sso=scott
Regards,
Arun -
Not able to pass parameter from one fragment to another fragment in another taskFlow
Hi,
I'm trying to pass parameter from one fragment to another fragment and want to print the parameter value in second fragment.
i have inputtext in first frag---
first fragment belongs to one taskflow1 and this taskflow1 i had darg and drop to one mainPage.
Under taskflow1 itself i drag and drop one taskflow call activity and on top of that i drag and drop another bounded taskflow as taskflow2
under taskflow2 i have one fragment as fragment2and in that i have one outputtext field, now here i want to print the value from fragment1--inputtextfield value
to achive this i had tried many ways but somewhere doing mistake please explain step by step.
Thanks
MaheshIn addition you need to tell us your jdev version!
Can you elaborate on your use case a be more?
On which event this should happen?
In general contextual events should allow you to implement this, however, as I don't understand the use case, I find it hard to help.
Timo -
Passing parameter from workitem to bsp page
Hi,
is it possible to pass parameter from workitem to bsp page and also vice versa?SAP_WAPI_READ_CONTAINER function works well.but i need to pass a parameter to workitem container.
what i am trying to do is;
1-get data by using sap_wapi_read_container
2-change data
3-send changed data back to workitem
my problem is in third step.I am using SAP_WAPI_WRITE_CONTAINER. but it doesnt work.After execution the FM return_code set to 1.
Do u know how to set a variable in workitem? -
Passing parameter from transaction iview
Hi,
We have a case of invoking a transaction iView from a WebDynpro application. I need to pass the parameter from transaction ivew to webdynpro application. Any pointer to this will be really helpful.
thanks....Hi,
While you are performing portal navigation from WD iVew (using navigateAbsolure() or navigateRelative()) to Transaction iview in that call itself you will get one of the parameter as business parameter. You could set the application parameter during portal navigation.
Regards,
Murtuza -
Pass parameter from dynamic navigation iView to WebDynpro iView
Hi All,
I know there are a lot of threads dealing with passing paramters from EP to WebDynpro using EPCM but actually I didn´t find a solution for my problem.
I have in the dynamic navigation area of the SAP Portal an iView based on a JSP dynpage. In the corresponding JSP I fire an EPCM-event:
EPCM.raiseEvent("urn:test.de:wochenb" , "passDataToWebDynpro" , evtData);
In the content area there is a WebDynpro iView. In this WebDynpro-application I subscribe to the event in the wdDoInit-method of a view:
WDPortalEventing.subscribe("urn:test.de:wochenb" , "passDataToWebDynpro" ,wdThis.wdGetDataFromJSPDynpageAction());
and I have an event-handler:
public void onActionDataFromJSPDynpage(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String dataObject )
//@@begin onActionDataFromJSPDynpage(ServerEvent)
IWDMessageManager manager = wdComponentAPI.getMessageManager();
manager.reportSuccess("EPCM event testing " + dataObject);
//@@end
My problem is now that the event is fired correctly by the JSP Dynpage but the event-handler of the WebDynpro is never executed.
As info: the domain of the J2EE-Server the webdynpro-application is deployed to is identical to the J2EE-Server the portal runs on.
Can anybody help ?
Thanks !
BerndHi All,
I found the solution by myself.
For information: Click in the dynamic navigation fires the event und forces the content afterwards to refresh. During the refresh the WebDynpro subscribes to the event in the wdDoInit-Method. This is to late because the event is fired before the refresh.
My solution is to use a setTimeout before the event-triggering in the dynamic navigation iView.
Regards,
Bernd -
How pass parameter from Form to Graphics through Report?
I wrote a Report called by a Form and pass a parameter from the
Form to the Report, successfully! But I imported a Graphic in
the Report, and the Graphic could not get the parameter...(the
parameter in the Report and Graphic should both pass from the
Form).
I call the Report by " Run_Product( REPORTS, :V_PRTNAME,
SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,NULL); " in the Form.
and I imported the image from file for the Graphic in the Report.
Thanks for your help!
nullMeilan (guest) wrote:
: I wrote a Report called by a Form and pass a parameter from the
: Form to the Report, successfully! But I imported a Graphic in
: the Report, and the Graphic could not get the parameter...(the
: parameter in the Report and Graphic should both pass from the
: Form).
: I call the Report by " Run_Product( REPORTS, :V_PRTNAME,
: SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,NULL); " in the Form.
: and I imported the image from file for the Graphic in the
Report.
: Thanks for your help!
Meilan,
This forum is for Headstart related questions and experiences
only. Please go to metalink.oracle.com to get more information on
your problem.
Regards,
Ton
null
Maybe you are looking for
-
Olá Pessoal, Com relação ao campo Nota de Remessa na tela da MIGO: No recebimento físico, informa-se a nota fiscal do fornecedor neste campo uma vez que ele é o documento fiscal. Entendo, ainda, que há também outras razões para isto: 1o. O número da
-
Anyone had any problems with there N95 top left shortcut key not working,mine won't do anything when pressed then suddenly has a mind of it's own and keep pressing it's self and sending blank text messages to my first contact in my address book... Tr
-
IOS 8.0.2 available via OTA
The new firmware is available via OTA
-
Data transfer using EDI from one SAP system to other SAP system
Dear all, I understand that i should use normal ale-idoc features to transfer data from one sap to other sap system. but can i transfer those idocs using EDI from one SAP to other SAP system
-
Promotions are not appering in Outbound process WPMA
Hi, When i send promotions data through manual outbound (WPMA), system throws an error " No promotions exist for selection" I am able to send all other through WPMA like MC, article data and EAN. Though i created promotion with all necessary follow o