Pass Parameter into ADF Creation Form
I have an ADF Read Only Form on page 1, and and ADF Creation Form on page 2. I want three specific fields from page one to be passed into the appropriate fields on page 2. How would I go about accomplishing this?
Thanks,
Tim
Hey Shay,
I got one value to pass:
I put a setAction Listener on the command button. My From was #{backing_confirmTest.outputText2.value}. And my To was #{processScope.Test}.
When I tried to add another setAction listener to the same button it wouldn't let me. Can I not have another set of values like... #{backing_confirmTest.outputText3.value} and #{processScope.Test2}??
Thanks,
Tim
Similar Messages
-
How to insert into two tables using a Single ADF creation form?
Hi,
I need to make a ADF Creation Form that will insert the data at same time in two tables... Like i have two tables Track (Track_id,Track_Name)
and Module ( Module_id, Track_id, Module_name, Module_Short_name) and i have to insert the data in both the tables using Same Creation Form.
can anybody help me out and gave me the solution,how to do that?
Thanksif you want to insert different data into two different tables then you can drag the two data objects into creation form..
If you want to duplicate the data inserted in the one table to another then you can follow two approach
1. Drag and drop one table, When Save button is invoked then insert data into another table using callable statement.
or
2. Create on-insert trigger in Table1 where you can insert data into table2.
--Prasanna -
How to pass parameter into a source variable of a invoke activity
I'm an new BPELer, I created a invoke activity to submit Oracle Appplications concurrent program, but I don't know how to pass parameter into source variable.
BTW, I have created the mapper file (.xsl) file.
could anyone tell me how to do that?
Thanks,
VictorHi.
How you start application? I think you send message to webservice(BPEL process is webservice too). So construct message with variable and value.
But I created only processes where input value doesn't matter. I haven't use mapper yet too. -
How can I pass parameter from report to form?
Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters -
How to pass parameter into extract function (for XMLTYPE)
I have a table PROBLEMXML with XMLTYPE field xml_column. In this column there are several deffinitions for the problem. There is no max amount of deffinitions and it can be no definition at all. I need to return all definitions for every problem as a string wirh definitions separated by ";".
Query
SELECT extract(prob.Def,'/Definitions/Definition[1]/@var') || ';'|| extract(prob.Def,'/Definitions/Definition[2]/@var')
FROM PROBLEMXML j ,
XMLTABLE (
'/problem'
PASSING j.xml_column
COLUMNS probid VARCHAR (31) PATH '/problem/@id',
Def XMLTYPE PATH '/problem/Definitions') prob
where PROBLEM_ID =1;
returns exactly what I want a;m.
But
declare
my_var varchar2(2000) :=null;
n1 number;
n2 number;
begin
n1:=1;
n2:=2;
SELECT extract(prob.Def,'/Definitions/Definition[n1]/@var') || '|'|| extract(prob.Def,'/Definitions/Definition[n2]/@var') into my_var
FROM ETL_PROBLEMXML_STG_T j ,
XMLTABLE (
'/problem'
PASSING j.xml_column
COLUMNS probid VARCHAR (31) PATH '/problem/@id',
Def XMLTYPE PATH '/problem/Definitions') prob
where PROBLEM_ID =1;
dbms_output.put_line(my_var);
end;
returns NULL.
Is there is a way to pass parameter into extract function?I need to return all definitions for every problem as a string wirh definitions separated by ";".In XQuery, there's the handy function "string-join" for that.
For example :
SQL> WITH etl_problemxml_stg_t AS (
2 SELECT 1 problem_id,
3 xmltype('<problem id="1">
4 <Definitions>
5 <Definition var="var1"></Definition>
6 <Definition var="var2"></Definition>
7 <Definition var="var3"></Definition>
8 </Definitions>
9 </problem>') xml_column
10 FROM dual
11 )
12 SELECT j.problem_id,
13 prob.probid,
14 prob.def
15 FROM etl_problemxml_stg_t j,
16 XMLTable(
17 'for $i in /problem
18 return element r
19 {
20 $i/@id,
21 element d { string-join($i/Definitions/Definition/@var, ";") }
22 }'
23 passing j.xml_column
24 columns
25 probid varchar2(30) path '@id',
26 def varchar2(100) path 'd'
27 ) prob
28 ;
PROBLEM_ID PROBID DEF
1 1 var1;var2;var3 -
How to pass parameter into transaction iview ?
Hi experts,
I want to know "how to pass parameter into transaction iview ".
Regards,
Krishna Balaji THi Krishna,
Not sure if this can help you.
1) Passing a parameter to a transaction iview (I saw a resolved suggestion)
Passing a parameter to a transaction iview
2) Passing a parameter from the portal to R3 (helpful info for you)
Passing a parameter from the portal to R3
3) Create SAP Transaction iView using SAPGUI for Windows (Great Blog and info about TA Iview)
Create SAP Transaction iView using SAPGUI for Windows
Please check the following link for Transaction Iviews
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
Just some info: Portal is basically what the end user can see. What he can do, is still maintain in the backend system. If there are parameters setup already for the user in the backend system (in SU01), then those parameters should still valid for the transaction that the parameters are linked to.
Hope that helps and award points for helpful suggestions.
Ray -
Can I use View Link in ADF Creation Forms Jdev 10.1.3
Hi...
I created a view link of two tables. Then I created a ADF form with Master Object to show some informations.. and I created a ADF Creation form with the detail Object
I'm trying to submit the informations added in the Detail forms.
but no records are created in Database..
Can I submit a creation form using detail object?
ThanksI figured out "partially" the problem, I tried to overrid the create method, and for any reason the commit operation wasn´t working.
I was trying to set a value for a proprety, but it did not work as a wish.
My intention was.... when an user execute the form. one specific field brings a value.. however I cannot set default value. cause it´ll change sometimes.
it´s something like this
protected void create(AttributeList attributeList) {
super.create(attributeList);
setMyProperty(new Number(0));
do you know how can I figure out this problem? -
How to programmatically initialize field in ADF Creation Form
I'm using JDEV 10.1.3.2, ADF BC. The task sounds simple:
1. Create an ADF Creation Form by pulling in a VO (backed by EO) from Data Control.
2. Initialize one of the required fields in a backing bean from processScope.
3. User sets other fields via GUI.
4. Save the new record in the database (Commit).
The problem is how to do step 2? The processScope variable is being retrieved properly, but I have not been able to set the required field so that the user does not have to enter this field. I have an action on the Save button as follows:
public String commandButton_action() {
String psnetid = null;
BindingContainer bc = getBindings();
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
psnetid = afContext.getProcessScope().get("netid").toString();
//Need to set Netid field in VO to psnetid here
OperationBinding operationBinding =
bc.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
}Can anyone shed some light on this?
Thanks.This is outside of the backing bean, but you may try it:
modify the getter on the entity impl class (if you are using ADF BC) to set a default value
This example is to set a default status id on the field.
public class <EntityName>Impl extends EntityImpl {
public static final int STATUSINTLID = 1; //first column name on the entity
public Number getStatusIntlId() {
Object intlId = getAttributeInternal(STATUSINTLID);
if (intlId == null){
int intValue;
intValue = <get value from somewhere code>;
Number defaultValue = new Number(intValue);
if (defaultValue != null){
this.setStatusIntlId(defaultValue);
return (Number)getAttributeInternal(WATERDRAWSTATUSINTLID);
Cheers,
Jim -
I need to create form that will show empty values because i want to enter new records in empty table. I have found out that i need to select ADF creation form from the context menu when i drag the collection for which i want the form to be created. The problem is that i don't have ADF creation form listed under forms submenu. I'm using JDeveloper 11g.
Can someone help me?
Edited by: user4711269 on Dec 11, 2009 2:33 AMHello Frank and thanks for your answer.
I have managed doing this with only one page with this tutorial http://blogs.oracle.com/shay/2007/07/25/
thanks -
Pass parameter to report paramater form from a form
I defined parameter in a form. I am trying to pass the parameters to a report's parameter form. Is there any way to accomplish this?
Thank you!Maybe this example will help. This can be added in a when button pressed event to run the report.
DECLARE
pl_id ParamList;
subheader varchar2(1000);
BEGIN
** Check to see if the 'tmpdata' parameter list exists.
pl_id := Get_Parameter_List('tmpdata');
** If it does, then delete it before we create it again in
** case it contains parameters that are not useful for our
** purposes here.
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
** Create the 'tmpdata' parameter list afresh.
pl_id := Create_Parameter_List('tmpdata');
** Add 1 data parameters to this parameter list
*/ -- subheader is a parameter created in Oracle Reports
subheader := :variable.txt_message_yes;
Add_Parameter(pl_id,'SUBTITLE',TEXT_PARAMETER,subheader );
**Pass a Parameter into PARAMFORM so that a parameter dialog will not appear
**for the parameters being passing in.
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
** Run the report synchronously, passing the parameter list
*/ -- ABC is the report name
Run_Product(REPORTS, 'ABC', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
END;
null -
Passing parameters into the Oracle form
I want to pass some paramaters into the .fmx file which i invoke through the applet. like say, in the following line
serverArgs="module=abc001.fmx userid=user/pwd@dbuser useSDI=no"
i want to pass parameters in the following manner:
serverArgs="module=abc001.fmx(param1,param2) userid=user/pwd@dbuser useSDI=no"
since one cannot pass parameters to a .fmx file before invoking it, it does not seem possible.
But is there a sort of a workaround? A java wrapper for oracle forms?? so that i pass parametrs to the java class and it passes this info to the form.
i need to pass these parameters because these param1,param2 are the username/password for my oracle forms-based application which implements its own in-house user validation logic and i need to display the menu in the applet based on the user without prompting him for this application username/password
thanks
Any help will be highly appreciated.In the form FNDRSRUN which is the Standard Request Submission form there are parameters CHAR1-CHAR5, NUMBER1-NUMBER5, and DATE1-DATE5. I was wondering if i populate the parameter NUMBER1 with my value how can I access this parameter when the form is brought up. This is more of an applications setup issue I will be creating a function that calls the FNDRSRUN form this function will force this form to use a single request not a request group. In the request setups there is a parameter. When I set up the request parameter I have to select a value set and then for Default Type I can select Constant, Profile, SQL Statement, or Segment and then I have to give a default value. Can I default this parameter to use NUMBER1 or another parameter in the FNDRSRUN form.
-
How to pass parameter into cursor for loop ?
Hi Experts,
I want to pass parameter l_bom_header_tbl(i).assembly_item_name into the for statement below How to achieve this?
for j in 1 .. l_bom_components_tbl.COUNT LOOP
ThanksMaybe i failed to describe in detail,so here i go:
I have two for loops:
for i in 1 .. l_bom_header_tbl.COUNT LOOP --1st For Loop
V_bom_header_tbl.organization_code :='DSC';
V_bom_header_tbl.assembly_item_name:= l_bom_header_tbl(i).assembly_item_name ;
k:=1;
I want to pass parameter l_bom_header_tbl(i).assembly_item_name into the for statement below: How to achieve this?
for j in 1 .. l_bom_components_tbl.COUNT LOOP *2nd For Loop*
v_bom_components_tbl(k).Assembly_Item_name := l_bom_header_tbl(i).assembly_item_name ;
k := k + 1;
end LOOP;
end loop;
end;
I want to pass a paramter into second for loop in such a way that it accepts from the first for loop
for j in 1 .. l_bom_components_tbl.COUNT LOOP -2nd loop
Edited by: ILovePlSql on Mar 22, 2010 12:25 PM -
Hw to pass parameter from report to forms
Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
ChandanHi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan -
Pass parameter into eventhandler in russian language after submit form
public static EventResult handlerSearch(BajaContext context, Page page,
PageEvent event)
String attrValue = event.getParameter("attrValue");
If "attrValue" is English, all is ok. But if "attrValue" is Russian language - attrValue = "".
Is it depend on encoding on page or default UIX encoding or something else?
Help me please.
Thank.Sergey,
The encoding used is based on the encodings the browser and HTTP server support. Parameters in non-English should work fine, so it seems like something odd is going on. To try to debug this, let me ask you some questions:
1) What HTTP server and servlet engine are you using?
2) What browser, version, and client OS are you using?
3) In your event handler, can you print the value of
context.getPageDecoder().getRequestCharacterEncoding()and report back here what it says?
4) In your handler can you also report back the value of
context.getServletRequest().getParameter("attrValue")? (Note that you should not pull directly from the request in general -- this is just to aid debugging the problem.)
With these answers I will hopefully able to be more helpful.
Thanks,
-brian
Team UIX -
Pass parameter from Portlet to Form?
Hi Frineds
I created a plsql portlet in which i am displaying a combo box with the list of client id's
I created a Form from locally built Provider which got a client ID as one of the column.
My question is. If the user selects client id from combobox, it should go the
client ID column .. on the Form
Can any one give me suggestions.. how to achieve this?
Thanks
RaviI have a similar problem where I have a portlet X which accepts parameters using the <passAllUrlParams>true</passAllUrlParams> tag in the provider.xml and it works if portlet X is directly on page A. However, because I need to wrap portal security around this portlet declaratively, I will need to apply security on this page A and then publish page A as a page portlet Z, then drop page portlet Z on another page, page B. (I hope you all been through this before to apply security around a portlet). By doing this - the parameters are no longer being passed into portlet X anymore.
To get around this - I will need to define page parameters for page A and map them to portlet X via the "Parameters" tab in edit mode and then define the same set of page parameters on page B and map them to the page portlet Z just to get the parameter passing working and flowing through to portlet X.
Is there anyway around this?
Do we always need to define page portlets in 10.1.4?
What does the <passAllUrlParams>true</passAllUrlParams> tag do in 10.1.4?
In 10.1.2 - the <passAllUrlParams>true</passAllUrlParams> tag was all you need to pass any number and type of parameters from a page B->page-portlet Z->portlet X
This feature seems to be missing in 10.1.4.
Please respond.
Thanks
Stanley
Maybe you are looking for
-
Pass Parameters to an external appl when launched from web dynpro ABAP .
I want to Pass Paramaters to an external application when launced from Web dynpro ABAP . I have successfully launched an .exe file ( Notepad / eViewHSEditor ) from Web dynpro using the logic from Standard WD_TEST_APPL_ACFEXECUTE component But I am u
-
Hi Experts, I selected current month option in standard birthday list report,but i am getting employee list for all months though i selected current month.please let me know how can i solve this. Thanks&Regards, narasimha
-
BUG? :: Short Hand IF BUG cause flash compile engine to go haywire x_x
var MyCurrentValue:String = "TEST"; var MyOperatorBug:Boolean = !(MyCurrentValue != null ? MyCurrentValue.length > 0 : false); trace(MyOperatorBug) Copy paste the above script into your ActionScript 3.0 Flash CS 4 IDE What this script do is , it che
-
No verification email for iCloud
When I attempt to set up iCloud with my email, I get to the point where a verification email is supposed to be sent. It doesn't get sent. When I use the troubleshooting page to check if I have an appleID, an email IS sent to the same email where th
-
hy this is a raja sekhar, i have a doubt in internal order. according to internal settlement, and eaxternal settlement. according to external settlemnt. if we post one fi document f-02, that document assainged in interal order. if we go for exernal s