Pass Parameter To Configuration Entry Point

In TestStand 2010 I have added a configuration entry point to select a configuration file. (Configure\Select Config File). I'm displaying a LabVIEW GUI which basically prompts the user to select a file. The file path needs to be stored in "FilePath" variable in TestStand.
Problem statement:
1. I'm trying to modularize this configuration entry point. Hence, I would write to "Parameters.FilePath" variable of configuration entry point stored in process model. This variable would be of "pass by reference" type and should eventually update the caller sequence.
However, I don't know how to pass the value from "Parameters.FilePath" to the caller sequence. I'm currently updating the station global variable directly which I think is not the correct method if I think of modularity.
2. I want the configuration entry point that was created ("Select Config File") to be enabled only when testing has not started (I'm just using single pass for my project).
Which variable in TestStand would tell me if the execution entry point "Single Pass" is called or not?

hi bce,
[ If I used a station global, how would my changes be saved? Can you do this programmatically? Is there a better way? ]
When Teststand closes, it automatically saves the StationGlobals. You would use PropertyObjectFile.SaveFileIfModified if you needed to force the save. But you shouldn't really need to do this as the latest value is available to all sequences and sequence files.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

Pass data from configuration entry point

I have a need to post data from a Configuration Entry Point during a Test UUTs execution. I would like to update a parameter in my test sequence, using the configuration entrypoint if the test sequence is actively running in Test UUts. If it's not active, I would update a .ini file which gets read by the process model when a new Test UUTs entrypoint is started.
My first guess has been to determine if the TestUUTs sequence is active, and I have tried using the PropertyObject RunState.ProcessModelClient.IsExecuting, but I just realized the Configuration Entry Point is always running in the process model.
Everything I have read indicates that most Configuration Entry Points just write data to a file. Am I doing something fundamentally wrong?
How do i determine if my sequence file is being executed with TestUUts?
Thanks for your help. Woefully confused,
Brian

hi bce,
[ If I used a station global, how would my changes be saved? Can you do this programmatically? Is there a better way? ]
When Teststand closes, it automatically saves the StationGlobals. You would use PropertyObjectFile.SaveFileIfModified if you needed to force the save. But you shouldn't really need to do this as the latest value is available to all sequences and sequence files.
Regards
Ray Farmer
Regards
Ray Farmer

How to enable keyboard shortcuts for configuration entry point?

Hello All,
In my process model, I have a configuration entry point sequence (sequence). I can able to select the corresponding entry from the menu bar ie. configure --> options (for eg). Now I need to have a keyboard shortcut for the same. In my case if I press (for eg) ctrl+w, the configuration entry point sequence must be called.
Note - I have to do this using .NET programmatically.
Is there any way I can incorporate this mechanism...?
Thanks
Arun

Hello Arun,
At this time there is not anyway to customize the keyboard shortcut keys for menu items you add to the TestStand sequence editor. R&D is looking into implementing this in a future version of TestStand. I'll pass along your feedback to them, and let them know there are others interrested in this feature.
Kristen
National Instruments

Doubt in configuring entry points for iviews

Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.

Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Parameter: Description
displaymode:Specify select
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/pcd

Kind of expression for enabling configuration entry point

I need to enable a configuration entry point not only with the "classic" 'CurrentUserHasPrivilege()' (of Engine obj) expression but also if a certain callback is present in the model client file.
I try to use RunState, ThisContext and Execution objects but without results.
Any suggestion?
Many thanks
Luigi Magni (System Engineer - CTA)

Hi LuigiM,
I set the enabled expression to the following:
PropertyExists("RunState.InitialSelection.SelectedFile.Data.Seq[\"MySequence\"]")
To one of the Configure Entry Point callback sequence in the process model e.g. the Configure Report Option.
As you can see, the Report option will only be enabled if there is a sequence call 'MySequence' in the the active sequencefile.
This seems to work quite well.
The RunState.ProcessModelClient only appears to be available once the SequenceFile is executing.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

Sub-menus Configuration Entry Point

From the configure Menu in Teststand, I want to generate a pop-up or a sub-menu whereby a user can input a time that would be read in by Teststand
sequence. Is this possible? By default, I want the time to be set to 8:00AM, in case of the user not making any selection. How can I go about doing this? I was told that this may be possible via Configuration Entry points in the Sequential Model. Can some experienced forum members shed some light on this matter?

Would they need to set it during every execution? if so then it makes sense to override the Process Setup Callback.
Otherwise, it sounds like you would need to store this to disk somehow. I wrote an example:
http://forums.ni.com/t5/NI-TestStand/Saving-User-Config-file/m-p/1723094#M34630
I hope you find it helpful.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Calling a Configuration Entry Point from a C# code module

Hi,
Is it possible to call a configuration entry point from a C# code module?
I have a custom process model which creates some configuration entry points.
One of the entry points, calls a C# method in a code module to display a Startup screen for the operator.
In an Editor User Interface, I have added a toolbar, now I want to execute the previous entry point initiated from my C# code to get the Startup screen again when a button is clicked on the toolbar.
Best regards

Hi James,
Thanks for your suggestion, but unfortunely the code hangs after executing the entrypoint, if have tried it in two ways, but both have the same result. Do you have any idea how to fix this.
Trial 1:
 Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) { switch (entryPoint.Name.ToUpper()) { case "TOGGLE ONLINE <-> OFFLINE": object objEditArgs = System.Type.Missing; entryPoint.Run(objEditArgs); // Application hangs after executing this command, the entrypoint does not execute! break; default: break; }
 intIndex++;
Trial 2:
 Engine engine = new Engine(); ApplicationMgr applicationMgr = (ApplicationMgr)engine.GetInternalOption(InternalOptions.InternalOption_ApplicationManager);EntryPoints entryPoints = applicationMgr.ConfigurationEntryPoints; int intIndex = 0;foreach (EntryPoint entryPoint in entryPoints) { switch (entryPoint.Name.ToUpper()) {
 case "TOGGLE ONLINE <-> OFFLINE": // Application hangs after executing next command, the entrypoint does not execute! applicationMgr.GetCommand(CommandKinds.CommandKind_ConfigurationEntryPoints_Set, intIndex).Execute(true); break; default: break; }
 intIndex++;
Best regards

GetCommand does not return my configuration entry points?

If I'm in a client sequence file and I want to dynamically execute my own configuration entry point in the process model what is the best way to accomplish that?
I am trying to get the application manager through an activex step using Engine.GetInternalOption(InternalOption_ApplicationmManager) and then I choose the GetCommand method with CommandKind_ConfigurationEntryPoints_Set. It will only use an index for one of the 3 default configuration entry points (Report Options, Model Options or Database Options). It throws an index out of range if I try to get my own. This is from James Grey's post here: http://forums.ni.com/t5/NI-TestStand/Calling-a-Configuration-Entry-Point-from-a-C-code-module/td-p/1... (I'm not in .NET though. I just want to use activex steps in TS). The 3 default ones work perfectly. It's only when I try my own that I've added.
Any thoughts?
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Solved!
Go to Solution.

I can call it directly as well but it doesn't exhibit the behavior I want.
Basically we have a process model with a Configuration Entry point called About Test. This calls a sub sequence which has 2 steps in it. The first step is a callback and the second is a VI call. The VI displays a splash screen with our company logo, disclosure and the text (usually a software part number) returned by the callback.
What I want to do is put the SequenceFileLoad callback in our clients and have a step in there that will invoke the About Test entry point upon sequence load.
The series would look like this:
SequenceFileLoad(client)>>About Test Configuration Entry Point(model)>>SubSequence(model)>>About Test Model Callback (client)>>VI Splash Screen(model)
All of this would be a lot easier with a (ProcessModelFileLoad): http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/ProcessModelFileLoad-Engine-Callback/idi-p/225016...
So back to my point about it not working correctly. It doesn't seem to be invoking the model callback when I use New Execution or call the sequence directly.
Also, what is the explanation for my config entry points not showing up at all in the list? it seems that function should grab all config entry points in the model.....
Thanks a bunch,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Forcing Single Pass entry point

Hi all
I have a sequence based on the sequential model that I only ever want to enter as single pass. I am driving myself slight crazy as I keep clicking “Test UUT(s)” rather than “single pass”. Is there a call back or expression I can add that will force the sequence to run as single pass regardless of which button I click?
Many Thanks
Dave B
P.S Happy new Year
Solved!
Go to Solution.

Because the client and model are "decoupled" and the client technically doesn't get called until later in the execution this is a tricky one.
Several options:
Customize the UI to only allow the Execution Entry point button to be linked to the Single Pass entry point
In the Sequence Editor fix your toolbar to only show the Single Pass entry button
This one is kind of a hack: override the Process Setup callback and if the entry point was Test UUTs then kill the thread and start a new one using the Single Pass entry point
Remove Test UUTs from the process model. Or change it to a configuration entry point temporarily.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Is it possible to add a single Entry Point menu item to a LabVIEW OI menu?

Using the "TestStand - Insert Commands in Menu (Application Manager).vi" library VI, I can add all Configure menu items to a menu with the "CommandKind_ConfigurationEntryPoints_Set" option for the "Commands" input. But the VI is missing an "Index" input to specify a single item from the collection. (UnlikeThe "AplicationMgr.ConnectCommand()" function, which allows you to specify a single item with an index.)
The issue is the same for Execution Entry Points and Tools as it is for Configuration Entry Point--I can create a menu containing the entire collection, but not a single item. I tried to delve into the VI to change it to allow specification of individual commands using an index using the Commands.Insert() function instead of the Commands.InsertKind() function, but without success.
As an aside, even when I add all Tools to a menu (using CommandKind_Tools_Set), TestStand exits with a warning that 12 "RunTimeMenuItem" objects were not released. I'm wondering if I should be using the Engine.GetRunTimeToolMenuItems interface instead. But if that's the case, I think I have to build the menu myself and can't use the TestStand library VIs to automatically run commands when their corresponding menu items are selected. Maybe this is just a bug in the TestStand VIs?
I am using TestStand 2010 SP1 with LabVIEW 2014.
Any advice would be appreciated. Thanks.
-Jeff

I am closing the TestStand Engine, VI Refnum, Quit Application event, and Event Callback, just like in the example. I get the TestStand unreleased reference error only if I call that VI to include the Tools menu. The fact that the unreleased objects are "RunTimeMenuItem" objects also implies to me that the problem is specific to the Tools menu items. Since Tools menus seem to have their own API (which involves RunTimeMenuItems), it seems to me that the VI (or the TestStand Engine?) is doing something with RunTimeMenuItems that I can't see, and is somehow losing track of them (because that VI gives me no visibility to any RunTimeMenuItem objects). Is it possible that one should explicitly use RunTimeMenuItem objects instead of the menu VI when dealing with Tools menus? (Maybe the error is due to my using TestStand 2010 SP1 on Windows 8.1, for which TestStand 2010 SP1 is not officially supported?)

File Menu Entry Point from VC

Hi,
I am trying to execute a File Menu entrypoint from VC++ code.
can anyone please suggest how to do the same.
I have used below piece of code in my project to execyte the entrypoint.
Here, "Select Model" is one of the File menu item from my process model.
i wanted to execute "Select Model" menu item from VC++ code. but the below piece of code is executing operation failed message
I have doubt at my seqFile ptr. can you please suggest how to give process model seq file reference to seqFile ptr here.
        ExecutionPtr           newExecution = NULL;
       TS:equenceFilePtr       seqFile =GetSequenceFile()   ;
       TS:equenceFilePtr       processModel =    NULL;
       TS::EditArgsPtr           editArgs = NULL;
       TS::EditArgsPtr           seqArgs = NULL;
       _bstr_t                   entryPointName ="Select Model";
       TS::IEnginePtr engine = mApplicationMgr->GetEngine();
       processModel = engine->GetStationModelSequenceFile(NULL);
       editArgs = engine->NewEditArgs();
       editArgs->SetSelectedSequenceFile(seqFile);
       TS:ropertyObjectPtr container = engine->NewPropertyObject(PropValType_Container, FALSE, "", 0);
       container->SetValString("sequence", 0x1, "MainSequence");
       _variant_t vtEditArguments((LPDISPATCH)editArgs, TRUE);
       _variant_t vtSeqArguments((LPDISPATCH)container, TRUE);
       newExecution = engine->NewExecution(seqFile, entryPointName, processModel, 0,
                                           TS::ExecTypeMask_InitiallyHidden, vtSeqArguments, vtEditArguments, vtMissing);
       engine = NULL;
SequenceFilePtr CTestExecDlg::GetSequenceFile(void)
   RuntimeTrace(" TRACE---------CTestExecDlg::GetSequenceFile(void)       \n");//trace
   return mFile;

I'm assuming you have a process model configuration entry point placed in the File menu via a menu hint and that it works fine from the File menu. If so, the following code will execute it:
    long numInserted;
   TSUI::CommandsPtr commands = mApplicationMgr->NewCommands();
   commands->InsertKind(CommandKind_ConfigurationEntryPoints_Set, mSequenceFileViewMgr, -1, "File", "File, Edit, Execute, Debug, Configure, Tools, Help", &numInserted);
   commands->GetItem(0)->Execute(VARIANT_TRUE);

Using "Single Pass" entry point with sequences not named "MainSequence"

Hi,
The object model of TestStand provides clustering of multiple sequences in one sequence file. The editor itself allways knows which sequence the user has actually selected (enrty Run ... in Menu Execute is allways fullfilled with the correct sequence name).
Why isn't there any support of using the entry points of the model with this selected sequence, these sequences use the default "MainSequence" if they are called by the corresponding menu entry of the Execute Menu.
I am looking for any solution to use the entry points (by menu calls) with sequences not named MainSequence as well.
Any ideas?
Regards,
Sunny

Sunny -
In the process model entry point "Single Pass", if you look at the sequence context during an execution, you will notice that the sequence that was visible or "selected" at the time of the execution is started is specified under "RunState.InitialSelection.SelectedSequences[0]". You could alter the MainSequence call step in the process model to call that sequence instead. Keep in mind that you will have to decide how to handle the case when no sequence is selected, do you call MainSequence or do nothing?
Scott Richardson (NI)
Scott Richardson
National Instruments

Configuration Manager Remote Control: rc.exe - Entry Point Not Found

It appears this may have been caused by a patch since it happened after our systems were patched, but I can't be sure. This issue was reported before on SCCM servers that had KB2830477 installed. In some cases removing it works, but not in all
cases.
To create this error, we right-click a computer in a collection in the SCCM admin console on one of the SCCM servers, we get the message "Configuration Manager Remote Control: rc.exe - Entry Point Not Found" with the text "The procedure entry
point PdhAddEnglishCounterW could not be located in the dynamic link library pdh.dll." If the SCCM admin console is installed on a workstation, this can be used to start Remote Tools without a problem. This is only on Windows 2008 R2 servers
running the SCCM Admin console.

Does this continue to occur if you reinstall the console?
Does the console match the version of the ConfigMgr site?
Have you reviewed your AV logs to see if it might be getting in the way?
Have you used procmon to potentially identify issues with locating the the DLL?
Does this happen when folks are launching the admin console while directly RDPed into the server or when the console is served up using RemoteApp (given that's what the mentioned hotfix is for)?
Jason | http://blog.configmgrftw.com

Pass parameter to ssrs report in performance point webpart from textbox text

How to pass parameter to ssrs report in performance point webpart from textbox text
Please help me to solve this ...
Bikky Kumar

Edit your SharePoint page and add new text filter web part.
Then pass the text filter value to your performance point report using connections. Your report should include at least one parameter to get the value. More over you can set default value in text filter.

Can LabVIEW call a DLL built with VS(2005) C++ with /CLR and Without an Entry Point

My project requires me to convert a C++ program to a DLL and having it called by LabVIEW. Due to the complexity of this C++ program (converted from fortran using f2c -C++ option), it cannot be compiled without using /clr option. I did build the application standalone (/clr), and it functioned fine. When I build it into DLL using VS2005, I was forced to use No Entry point option and without using DllMain in the C++ code. Eventually the DLL was built without error. But after I call it from LabVIEW, I was not getting calculated results as expected. I added a testing function to the C++ code of the DLL and just try to modify a parameter, it will not, but only return the input numbers. I was passing data by pointer and not by value, so I expect this parameter output be modified. I suspect that the DLL didnt get executed at all as it has no entry point specified.
Am I on the right track to approach this task, or I am heading to totally wrong direction here? I believe due to the fact that my C++ was from f2c and use vsf2c.lib and so on, the code is managed code, so that a regular DLL cannot be built from it with an entry point. How can LabVIEW call such a DLL? Am I right on that? I really need your advice here for a right approach to this problem and possible implementation "watch outs"...Thanks!
Bryan

Hi...Finally I was able to compile my code with an entry point defined and without using /clr. I can also call this DLL from LV and got back a variable from a little test function added to the DLL. But the function that was used for my main application in the DLL crashed LV and I got a pop up box from Microsoft Visual C++ Runtime Library: Runtime Error! "This application has requested the Runtime to terminate it in an unusual way, please contact the application's support team for more information". In Visual Studio I also got the following message: (I eliminated most of the "No symbols loaded" messages that are not errors but just info.) I would apprciate if someone can take to look with your more "experienced eyes", many thanks! Bryan.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\xpsp2res.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\nicont.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\NICONTDT.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\nitaglv.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkbrow.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkrealt.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdaq.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdesktop.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mfc71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\MFC71ENU.DLL', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\FieldPoint\SubVIs\FPLVMgr.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfprt.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvProjectProxy.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvRealTimeCoreProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\MVEProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtCore4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtXml4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtGui4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\mxLvProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\nimxlcpp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\nimxlc.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\variable.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\lvMax.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\MAX\UI Providers\FieldPoint71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\MathScriptParser.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'Z:\bli\development\projects\galfitDLL\Debug\galfitDLL.dll', Symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\msvcr80.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\mesa.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mscms.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\icm32.dll', No symbols loaded.
The thread 'Win32 Thread' (0xf94) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x90c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xfd0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x284) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xdac) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa98) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x528) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x614) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa5c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xebc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x5cc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x700) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xcf0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xc7c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x4c8) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa4) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x52c) has exited with code 3 (0x3).
The program '[804] LabVIEW.exe: Native' has exited with code 3 (0x3).

Pass Parameter To Configuration Entry Point

Similar Messages

Maybe you are looking for