Pass parameters into a method from other methods.

I m testing 2 related applications with coded ui test and wanna pass a parameter from one method into another.
how can i do that?
Thank you in advance.

Hi mah ta,
Could you please tell us what about this problem now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Why I can't pass parameters into CR from VB6

I want to Pass parameters into crystal report from VB6.
But whatever I try, it don't work Fine,
always Show the message "This field name is not known".
Crystal Report::
Parameter: a.@cmpy;
                   b.@p1
formula:
a. If {?@cmpy} ="USA" or {?@cmpy} ="usa" then
      "This is test 1 sentences"
   else if {?@cmpy}="TWD" or {?@cmpy} = "twd" then
      "This is test 2 sentences"
b. if trim({?@p1})="1" then "This is test 3 sentences"
VB::
Public oApp As New CRAXDDRT.Application
Public oRpt As CRAXDDRT.Report
oRpt.ParameterFields(1).ClearCurrentValueAndRange
oRpt.ParameterFields(2).ClearCurrentValueAndRange
oRpt.ParameterFields(1).AddCurrentValue ("TWD")
oRpt.ParameterFields(2).AddCurrentValue ("1")
I had trid to use "IsCurrentValueSet" function to check whether parameter was set or not, and It responsed "Ture",so I so confused about it.
Anyone know about this??
ps. I had trid other way that change the formula indirectly, although it can work fine, but it isn't a right way to solve my problem.
Edited by: DeanLai on Jun 22, 2010 8:54 AM

I Find something.
First I tried to add parameter and wanted to see these value on Report.
So I inserted {?@cmpy} and {?@p1} into report, and used VB code
"oRpt.ParameterFields(1).AddCurrentValue ("TWD")" and "oRpt.ParameterFields(2).AddCurrentValue ("1")",
then ran the process, but it didn't display any value on report,
so why it couldn't pass value into parameter??
then I tried other way which was to add new parameter, and used the same way to pass
value into parameter, then it can display value on report.
So the different between these is {?@cmpy} and {?@p1} which come from
Stores Procedure.
While I set Database in crystal report, set all value into Store Procedure's
parameter(the window about "Enter Parameter Values"), then it automatic come out the DB columns and parameter(SP parameter)
, course include {?@cmpy} and {?@p1}.
Do this problem cause my question?
Can we pass value into parameter which come from SP parameter??
Can we use these parameter into forumla??
Edited by: DeanLai on Jun 30, 2010 11:56 AM

Passing Parameters via Post Method from Webdynpro Java to a web application

Hello Experts,
I want to pass few parameters from a web dynpro application to an external web application.
In order to achieve this, I am referring to the below thread:
HTTP Post
As mentioned in the thread, I am trying to create an additional Suspend Plug parameter (besides 'Url' of type String) with name 'postParams' and of type Map.
But when I build my DC, I am getting the same error which most of the people in the thread have mentioned:
Controller XXXCompInterfaceView [Suspend]: Outbound plug (of type 'Suspend') 'Suspend' may have at most two parameters: 'Url' of type 'string' and 'postParams' of type 'Map'.
I am using SAP NetWeaver Developer Studio Version: 7.01.00
Kindly suggest if this is the NWDS version issue or is it something else that I am missing out.
Also, if it is the NWDS version issue please let me know the NWDS version that I can use to avoid this error.
Any other suggestion/alternative approach to pass the parameters via POST method from webdynpro java to an external web application apart from the one which is mentioned in the above thread is most welcome.
Thanks & Regards,
Anurag

Hi,
This is purely a java approach, even you can try this for your requirement.
There are two types of http calls synchronous call or Asynchronous call. So you have to choose the way to pass parameters in post method based on the http call.
if it is synchronous means, collect all the values from users/parameters using UI element eg: form and pass all the values via form to the next page is nothing but your web application url.
If it is Asynchronous means, write a http client in java and integrate the same with your custom code and you can find an option for sending parameters in post method.
here you go and find the way to implement Asynchronous scenario,
http://www.theserverside.com/news/1365153/HttpClient-and-FileUpload
http://download.oracle.com/javase/tutorial/networking/urls/readingWriting.html
http://digiassn.blogspot.com/2008/10/java-simple-httpurlconnection-example.html
Thanks & Regards
Rajesh A

How I can pass parameters by POST method?

How I can pass parameters by POST method?
I use URL Template iView. I checked Requested Method - POST, but when I started the iView the program says:"It's a GET method!"
I use httpServletRequest.getMethod()in the program.
Environment: EP6 SP2
Thank's!

Hi Kremena,
the OSS stands for "Online Service System" - service.sap.com - messages or directly: service.sap.com/message.
Hope it helps
Detlev

Pass parameters into CellRenderer

Hello!
I want to pass parameters into CellRenderer.
How can I do that?

Found solution!
Create method, that set my Bean in CellRenderer, in what I keep my values, and call this method when create my CellRenderer. Than Use MyBean inside CellRenderer when it render cell.
JSP:
<hbj:tableView id="NewTable" model="LotsBean.ModelLots"
          design="TRANSPARENT"
          headerVisible="false"
          footerVisible="false"
          fillUpEmptyRows="false"
          selectionMode="NONE"
          visibleFirstRow="1"
          rowCount="16"
          width="100%" >
          <% MyCellRenderer MyCell = new MyCellRenderer();
                 MyCell.setST(MyBean);
                 NewTable.setUserTypeCellRenderer(MyCell); %>
     </hbj:tableView>
CellRenderer class:
     public void setST(user_registration_bean Bean){
          MyBean = Bean;

Passing parameters into an URL Services portlet

Hi,
is there any way to pass parameters into an URL Services portlet ? I want to give the user the ability to set a preference for which sections of an XML file should be displayed. The preference should be passed into the XMLFilter which should add these parameters as XSLT variables to the stylesheet. Is this possible ?
Cheers,
Ernst

As of now we do not have provision to pass parameters to the portlet dynamically. However, if required, at most could be used is headerTrim tag and footerTrim tag. If you want to discard some data from mid of the file, its not supported.
bye
Baig
null

Passing parameters to a method

I am passing objects to another method.
I do some changes to them and expect the changed objects to be available in the calling method ( since they are supposedely passed by reference) when the execution is returned to it. However, I don't get the changed objects but rather the old ones, before the method execution.
Can someone explain?
Thanks,
Boris.

I do some changes to them and expect the changed
objects to be available in the calling methodIf you modify an object passed to a method, then the changes made to that object will be visible as soon as they are made.
If you change the parameter so that it references some other object, this will NOT be seen in the calling method.
You can "fake" it by putting the object in question in an array and passing the array. Better though is to just not expect methods to be able to change references they are passed to point at some other object.

How to pass parameters/atrributes to Servlet from ALBPM

HI Friends,
I am invoking servlet from bpm using server configuration, i am able to invoke servlet, but not able to pass parameters dynamically,
Also I like to receive response parameters/attributes from servlets?
Can any body help me on this?
Look forward for response.
Cheers

Some helpful Docs on the WebServer component for you:
The WebServer component is used to send HTTP requests to an HTTP server and capture the responses. It supports HTTP methods GET and POST.
The body of the HTTP response is available in the WebServer.response attribute (String).
Note: This component is superseded by the Fuego.NetX.AdvancedWebServer component, which provides better performance and more functionality like support for proxies and for more HTTP methods (like PUT and DELETE).
Example: Get Oracle's website home page and save it to a file.
getFrom(WebServer, url : "http://oracle.com", args : null)
binaryResponse = Binary(text: WebServer.response,
encoding: "UTF8")
BinaryFile.writeFromBinaryTo(data : binaryResponse,
name : "/tmp/oracle_index.html",
append : false)

Pass parameters into iBot?

Hi,
We are trying to use iBots to generate a set of PDF files for many different parameter combinations. Is it possible to pass parameters (like a parameter file) into an iBot and have it run the same answers request for each row in the parameter file, and then save the PDF output to a local directory on the server? I think BI Publisher is better suited for this task but it is not an option for us right now.
Any suggestions?
Thanks

I guess I am unclear of how to automate this - I tried a simple java application from example I found on the web, calling a single Go URL, and it does not save in PDF format. Instead, I get a file with PDF extension but it's actually HTML content. The same code works if I call a direct URL to pdf file.
Is there some way to automate these Go URLS within OBIEE?
Here is the code I used if anyone is interested (doesn't seem to work with OBIEE though):
    public static void main(String[] args) throws Exception {
        URL u = new URL("http://localhost:9704/analytics/saw.dll?Go&NQUser=Administrator&NQPassword=Administrator&Path=/shared/Sample%20Sales/Reports/History&Action=Print&Format=pdf");
        URLConnection uc = u.openConnection();
        String contentType = uc.getContentType();
        int contentLength = uc.getContentLength();
        if (contentType.startsWith("text/") || contentLength == -1) {
          throw new IOException("This is not a binary file.");
        InputStream raw = uc.getInputStream();
        InputStream in = new BufferedInputStream(raw);
        byte[] data = new byte[contentLength];
        int bytesRead = 0;
        int offset = 0;
        while (offset < contentLength) {
          bytesRead = in.read(data, offset, data.length - offset);
          if (bytesRead == -1)
            break;
          offset += bytesRead;
        in.close();
        if (offset != contentLength) {
          throw new IOException("Only read " + offset + " bytes; Expected " + contentLength + " bytes");
        String filename = new String();
        filename = u.getFile();
        filename = u.getFile().substring(filename.lastIndexOf('/') + 1);
        filename = "obieetest.pdf";
        FileOutputStream out = new FileOutputStream("output/" + filename);
        out.write(data);
        out.flush();
        out.close();
    }

Pass parameters into SessionEventListener by using ConnectionPolicy

Hi,
My project is using Eclipselink/JPA with Oracle VPD. I have to pass some parameters into SessionEventListener to set up VPD context. I found couple postings in this forum talked about using ConnectionPolicy to pass in the information. Does anyone could give me a code sample about how to pass a parameter (ex. user ID) into a ConnectionPolicy? I am using JPA, so I didn't see a clear way for me to access ConnectionPolicy. Thanks!

I used the following solution and it worked for me
((EntityManagerImpl)em.getDelegate()).getServerSession().getDefaultConnectionPolicy().setProperty("USER_ID", userId);
Then in SessionEventListener, I could use clientSession to obtain "USER_ID" from connection policy.

Passing parameters to oracle rports from oracle forms

Dear all,
Can anyone tell me how to pass parameters from oracle forms 10g to oracle reports 10g ,i want to hide my connection string and parameteres while open the report through web
can anyone plese help me out to solve this problem.

Hi,
I had trail as advised, but anticipated results were not observed.
Here is the named configuration in formsweb.cfg
[NMPT]
form=D:\NMPT\FORMS\FHOPENFORM.fmx
userid=hmsprod/hmsprod@hindalco
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
imageBase=CodeBase
separateFrame=True
lookandfeel=oracle
logo=none
splashScreen=no
pageTitle =Test Application
background=no
colorScheme=blue
archive_jini=f90all_jinit.jar,icons.jar,frmwebutil.jar,jacob.jar
archive=f90all.jar
height=768
width=1024
envFile=nmpt.env
otherparams=useSDI=yesLOCATIONID=NMPT # new parameter which I want to access in my form
the URL is as follows:
http://MyPC:8888/forms90/f90servlet?config=NMPT
But I am unable to open the login page

Passing parameters into the Oracle form

I want to pass some paramaters into the .fmx file which i invoke through the applet. like say, in the following line
serverArgs="module=abc001.fmx userid=user/pwd@dbuser useSDI=no"
i want to pass parameters in the following manner:
serverArgs="module=abc001.fmx(param1,param2) userid=user/pwd@dbuser useSDI=no"
since one cannot pass parameters to a .fmx file before invoking it, it does not seem possible.
But is there a sort of a workaround? A java wrapper for oracle forms?? so that i pass parametrs to the java class and it passes this info to the form.
i need to pass these parameters because these param1,param2 are the username/password for my oracle forms-based application which implements its own in-house user validation logic and i need to display the menu in the applet based on the user without prompting him for this application username/password
thanks
Any help will be highly appreciated.

In the form FNDRSRUN which is the Standard Request Submission form there are parameters CHAR1-CHAR5, NUMBER1-NUMBER5, and DATE1-DATE5. I was wondering if i populate the parameter NUMBER1 with my value how can I access this parameter when the form is brought up. This is more of an applications setup issue I will be creating a function that calls the FNDRSRUN form this function will force this form to use a single request not a request group. In the request setups there is a parameter. When I set up the request parameter I have to select a value set and then for Default Type I can select Constant, Profile, SQL Statement, or Segment and then I have to give a default value. Can I default this parameter to use NUMBER1 or another parameter in the FNDRSRUN form.

How to run and pass parameters to exe file from the .txt file

hi,
i am facing problem with passing parameters to the .exe file which is run by labview.firstly i have .txt script with parameters which i have to pass to .exe file. This .exe file is also a software and that script is written for it.And now i have to create programm in labview which should fullfill following points.
1. I have to use one knob named 'Run script'.If i pressed the knob ,it should open the Browser where i can choose .txt script file.
2. .exe application should open(Path already chossen).
3. after passing the parameters .exe application should closed.
4.And labview now should update his parameter
I can just open .exe file using Exce.vi but i dont getting any idea to do more than this.can somebody please help me?
Solved!
Go to Solution.

This depends on the exe file. Does it retrieve the information as standard input or does it require the information as command line arguments?
Depending on this, you can read the txt-file in LV (using the file functions) and pass the content to the System Exec.vi.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to pass parameters into Function module : CLOI_PUT_SIGN_IN_FRONT

Hello friends,
I am displaying values ie, amounts in the screen using write statements here i have to display the
sign left side , i am using Function module   'CLOI_PUT_SIGN_IN_FRONT'
Does anybody help me - How to pass paramter into this Function module.
Regards,
Phaneendra

If you look to the code of the function module, you can see it is condensing the value.
I would make a copy of this function, and remove the condense lines to give the result you want.
data: text1(1) type c.
search value for '-'.
if sy-subrc = 0 and sy-fdpos <> 0.
    split value at '-' into value text1.
    condense value.
    concatenate '-' value into value.
else.
    condense value.
endif.

Trying to pass arguments into a method call and failing

Hi everyone, I'm fairly new to programming, and newer to Java. I'm currently working on a project that pulls fields from a database based on a name, and I'm having some trouble getting the connection string set up.
Statically defined, the database connects and the program logic that follows works just fine. The problem is that to future-proof this application, I need to pass the database URL, port, db instance, username, and password into the program as arguments from the batch file that will then be scheduled to run the program on a job-by-job basis.
Product Version: NetBeans IDE 6.1 (Build 200805300101)
Java: 1.6.0_06; Java HotSpot(TM) Client VM 10.0-b22
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
Userdir: C:\Documents and Settings\xxxxxxxxxxx.SPROPANE\.netbeans\6.1
Here's my current working source (with the network addresses obfuscated):
package processsqrjob;
import java.io.*;
import java.sql.*;
import java.util.Date;
public class Main {
     * @param args jobname, jobparameters, HYPusername, HYPpassword, HYPservername, HYPport, oracleDBURL, oracleport (default 1512), SID (dbb?), oracleusername, oraclepass
     * @throws exeption
    // jobname [0], jobparams[1], hypusername [2], hyppassword [3], hypservername [4], hypport[5], oracledburl[6], oracleport[7], sid[8], oracleusername[9], oraclepass[10]
    public static void main(String[] args) throws SQLException
        DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
        Connection con = DriverManager.getConnection("jdbc:oracle:thin:@oracleserver.local.intranet.com:1521:dbname", "username", "pass");
        Statement stmt = con.createStatement();
        Date date = new Date(); //get the system date for output to both the error log and the DB's lastrun field
        System.out.println(date); //print the date out to the console
        System.out.println(args[0]); //print the job name to the console
        String sourcefolder=""; //we're going to load the job source folder into this variable based on the job's name
        String destfolder="";//same with this variable, except it's going to get the destination folder
        try {
            ResultSet rs = stmt.executeQuery("SELECT * FROM myschema.jobs WHERE NAME =\'"+args[0]+"\'");
            while ( rs.next() ) {
                sourcefolder = rs.getString("sourcefolder");
                destfolder = rs.getString("destfolder");
            stmt.executeQuery("UPDATE myschema.jobs SET lastrun ='"+date+"' WHERE name ='"+args[0]+"'");//put this after hyp code
//            System.out.println(sourcefolder);
//            System.out.println(destfolder);
//            System.out.println(description);
            stmt.close(); //close up the socket to prevent leaks
        }catch(SQLException ex){
            System.err.println("SQLException: " + ex.getMessage());
            logError(args[0], ex.getMessage());
}That works, and it connects to the database and everything. But when I pass the variables in from the project properties run settings, I get the following exception:
Exception in thread "main" java.sql.SQLException: invalid arguments in call
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:207)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:235)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:440)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:752)
        at java.sql.DriverManager.getConnection(DriverManager.java:582)
        at java.sql.DriverManager.getConnection(DriverManager.java:207)
        at processsqrjob.Main.main(Main.java:42)
Java Result: 1That is with Connection con = DriverManager.getConnection("jdbc:oracle:thin:@oracleserver.local.intranet.com:1521:dbname", "username", "pass"); changed to Connection con = DriverManager.getConnection("jdbc:oracle:thin:@"+args[6]+":"+args[7]+":"+args[8]+"\", \""+args[9]+"\", \""+args[10]+"\"");{code}, with args 6 7 8 and 9 set to url, port, dbinstance, username, and password respectively.
Perhaps it's the way I'm escaping the quotation marks, but I put that same line inside a System.out.println() and it output it exactly as I had typed it in statically before, so I don't know what it could be.
I would really appreciate any advice. Thanks in advance for your time.

I think you're mixing up SQL and Java. The Java method expects the user name and password as separate parameters, not encoded in one String. So you shouldn't be concatenating args[9] and args[10] at all, they should remain as separate parameters.
The call should be:DriverManager.getConnection("jdbc:oracle:thin:@" + args[6] + ":"+ args[7] + ":" + args[8], args[9], args[10]);
                                                 parameter 1                                  2         3

Pass parameters into a method from other methods.

Similar Messages

Maybe you are looking for