Passing a image from a step to a UI
Hello
I have a TestStand step which acquires an image and creates a bitmap object with the 'NewBitmap' function. I get a bitmap ID which I send to TestStand. This function is included in a dll called acquisition.dll. In my TestStand sequence, I post the bitmap ID in a message to the UI. My callback in the UI get the ID and display the image with the 'CanvasDrawImage' function. The name of the file is UI.exe. So, my bitmap ID get through the different files below :
acquisition.dll -> TestStand sequence file -> UI.exe
My problem is that it works well on one PC (I get the picture on the UI), but not on another one. the 'CanvasDrawImage' function returns an error -12, out of memory. I precise that I use the same exe and dll files, I dont compile files on each PC.
So the the question is why is the result different from on PC to another one. Is the method I use ok ?
Regards
Laurent
If you are dealing with large images, the error message might be correct that you are out of memory. You can run out of memory when requesting a large block if memory is fragmented, even if you have enough total memory. If it is a borderline case, subtle software differences or usage difference between two computers could result in differing fragmentation where the allocation succeeds on one but not the other.
Can you reduce the size of the bitmap or any other large allocations?
Similar Messages
-
How to pass an image from the mobile application to the Adobe Media Server?
The image is taken as photo from the CameraUI in the Client Side(AIR Mobile Application) and saved as a .jpg file in the mobile. I passed the image byte array values from the client to the server. How to convert that byte array to a file in the Adobe Media server?
This is very similar to the problem here:
http://forums.adobe.com/thread/655314
processByteArray = function(byteArrayAsPlainObject){
// byteArrayAsPlainObject is an object serialized from a ByteArray but without functions
// we need to get a ByteArray that we can call functions on
var usableByteArray = new ByteArray();
byteArrayAsPlainObject.position = 0; // make sure we start from the beginning
ByteArray.prototype.readBytes.call(byteArrayAsPlainObject, usableByteArray);
// now usableByteArray contains what was in the original argument, but we can actually use it on the server side -
Pass image from webdynpro app through context nodes
Hi All,
Just wondering is there any way I can pass dynamically images from my WDA app to my interactive form through an XML interface?
I can upload my images into the MIME repository during design time, can I get the XSTRINGs of these, bind it to a context attribute then use the XML interface into the Interactive Form and have it bind that into an image field ? (do I need to convert XSTRINGs into base64 encoded formats?)
Sorry I'm a bit confused, a lot of the blogs I've seen all use ABAP dictionary based interfaces, is this the only way you can pass graphics from WDA into an Adobe Form dynamically?
Also, what do we need to do to pass values from our WDA context into an ABAP dictionary interface form?
Edited by: Danny Yee on Oct 7, 2011 10:10 AMHi Danny,
If you use file upload UI element in webdynpro, it will store the file in xstring format. Am not sure about images, but i think it will upload images also.
what do you mean by ABAP dictionary interface form? is it adobe form? if yes, then in your case quite simple.
first use upload ui element then read the xstring attribute value then try to bind the same value to datasource property of adobe interactive form.
Regards
Srinivas -
How can I take a single selected image from a slideshow to pass to another page?
I have a slideshow of several images from which a user needs to select one (for example the image that is featured in a lightbox after cicking the thumbnail) and then go to another page for further details on that image, with the same image displayed again, and where I want to embed some html to offer further options based on that selected image. How do I pass the name of the object from one page to another? How do I detect that a user has selected an image?
I have tried setting each image in the lightbox as a hyperlink to a new page, and also tried setting its caption as a hyperlink, but neither of those ideas seem to work (at least in Preview).
Any suggestions please? I am working in Muse CC 2014.Creating a hyperlink from the text caption should work. Try previewing: File/Preview Site in Browser to test.
(I tested it using both Preview and File/Preview Site in Browser and it did link to the page I assigned) -
Capture image from usb camera::step
hi
i want use labview to caputre image from my webcam
what are the ni drivers that required or step??
i use la 2012
regards
hi ?Q>Duplicate. Discussions will continue over there.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
To Passing image from Teststand to simple GU
Dear All:I'm having a problem of getting the vision image from Teststand to simple IO GUI.
One of the step of the Teststand sequence is to snap a photo from the cam and process the matching,
And I store it in the teststand local variable (Type:LabviewIOcontrol)So I can use that in other steps,
that works fine. But how could I get the Teststand image variable from the Labview simple IO GUI??
(I understand how to transferring string, number, or array between Teststand and Labview by using UI-MSG. just have no idea how to deal with object reference to get the image data I need to display in the GUI)
Any example or idea will be really helpful for me.
Thanks.
Eric
Message Edited by EricLu on 10-09-2008 02:51 AMDear Sir: Hi, In fact I am just new in teststand, and the reason I use LabviewIOcontrol as image type.
Because when i output the image, the teststand display the type is LabviewIOcontrol .
I did a test that I create a sequence file with 2 steps in it.
The first step, the vi reads a vision image from file and store it to teststand local variable (Type: IabviewIOcontrol).
And the second step, I dump the local variable to an indicator within another VI and check the image are transferred or not.
It works well, just I don't know how to change the Device Name and Session Number to image in Labview.....
I think I will take your second advice to build up the function first and try to find out the solution later on...
Thanks for your help.
Best Regards,
Eric
Message Edited by EricLu on 10-26-2008 09:55 PM -
Problem when passing an object from Illustrator to Photoshop inCS5 pack
Hello, since I have a new system I have this problem in Illustrator. When I try to pass and Icon for example, from illustrator to photoshop my Illustrator crashes. Even whe I try to save my work somethimes Illustrator crashes. I didn't had this problem with my old computer usineg the same pack CS5 the passing of a file from illutrator to photoshop took about 3 seconds. Please help me, my work is becoming frustrating beacause of this.
Here are the System details:
Photoshop
Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16332 MB
Free memory: 8674 MB
Memory available to Photoshop: 3255 MB
Memory used by Photoshop: 78 %
Image tile size: 1028K
Image cache levels: 5
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 650/PCIe/SSE2
Display: 2
Display Bounds:= top: 0, left: 1920, bottom: 1200, right: 3840
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 650
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 650
Video Card Memory: 1024 MB
Serial number: 92278816315259434402
Application folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\
Temporary file path: C:\Users\Mircea\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 150.0G, 149.7G free
C:\, 238.5G, 89.0G free
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2010/10/04-23:36:11 64.441628 64.441628
adbeape.dll Adobe APE 2010/02/23-12:40:58 61.421986 61.421986
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
AdobePIP.dll Adobe Product Improvement Program 5.0.0.2021
AdobeXMP.dll Adobe XMP Core 5.0 61.134777
AdobeXMPFiles.dll Adobe XMP Files 5.0 61.134777
AdobeXMPScript.dll Adobe XMP Script 5.0 61.134777
adobe_caps.dll Adobe CAPS 3,0,116,0
adobe_OOBE_Launcher.dll Adobe OOBE Launcher 1.0.0.64 (BuildVersion: 1.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
AFlame.dll AFlame 2010/02/23-17:27:33 61.421976 61.421976
AFlamingo.dll AFlamingo 2010/02/23-17:27:33 61.421978 61.421978
AGM.dll AGM 2010/10/04-23:36:11 64.441628 64.441628
ahclient.dll AdobeHelp Dynamic Link Library 1,5,0,30
aif_core.dll AIF 2.0 53.422628
aif_ogl.dll AIF 2.0 53.422628
amtlib.dll AMTLib 3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
amtservices.dll AMTServices 3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
ARE.dll ARE 2010/10/04-23:36:11 64.441628 64.441628
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2010/02/23-17:27:33 61.421978 61.421978
AXEDOMCore.dll AXEDOMCore 2010/02/23-17:27:33 61.421978 61.421978
Bib.dll BIB 2010/10/04-23:36:11 64.441628 64.441628
BIBUtils.dll BIBUtils 2010/10/04-23:36:11 64.441628 64.441628
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2010/10/04-23:36:11 64.441628 64.441628
data_flow.dll AIF 2.0 53.422628
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ExtendScript.dll ExtendScript 2010/10/19-10:22:12 61.445301 61.445301
FileInfo.dll Adobe XMP FileInfo 5.0 61.134777
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_flow.dll AIF 2.0 53.422628
image_runtime.dll AIF 2.0 53.422628
JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2, 0, 1, 11
MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS5 CS5
Plugin.dll Adobe Photoshop CS5 CS5
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 2.0.0.746
PSArt.dll Adobe Photoshop CS5 CS5
PSViews.dll Adobe Photoshop CS5 CS5
SCCore.dll ScCore 2010/10/19-10:22:12 61.445301 61.445301
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Threading Building Blocks 2, 1, 2009, 0201
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 1.0.0.68 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 1.0.0.68
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
3D Studio 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Average 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Bas Relief 12.0
BMP 12.0.2
Camera Raw 6.7
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Cineon 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Clouds 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Collada 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Color Halftone 12.0.2
Colored Pencil 12.0
CompuServe GIF 12.0.2
Conté Crayon 12.0
Craquelure 12.0
Crop and Straighten Photos 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
De-Interlace 12.0.2
Dicom 12.0
Difference Clouds 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Eazel Acquire 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Embed Watermark 4.0
Entropy 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Extrude 12.0.2
FastCore Routines 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Google Earth 4 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Grain 12.0
Graphic Pen 12.0
Halftone Pattern 12.0
HDRMergeUI 12.0
IFF Format 12.0.2
Ink Outlines 12.0
JPEG 2000 2.0
Kurtosis 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Lens Blur 12.0
Lens Correction 12.0.2
Lens Flare 12.0.2
Lighting Effects 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Liquify 12.0.1
Matlab Operation 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Maximum 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Mean 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Measurement Core 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Median 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Mezzotint 12.0.2
Minimum 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
MMXCore Routines 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Mosaic Tiles 12.0
Multiprocessor Support 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Neon Glow 12.0
Note Paper 12.0
NTSC Colors 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Ocean Ripple 12.0
OpenEXR 12.0.2
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Paths to Illustrator 12.0.2
PCX 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Photocopy 12.0
Photoshop 3D Engine 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Picture Package Filter 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Pinch 12.0.2
Pixar 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Portable Bit Map 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Poster Edges 12.0
Radial Blur 12.0.2
Radiance 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Range 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.0.4
Send Video Preview to Device 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Shear 12.0.2
Skewness 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Standard Deviation 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Sumi-e 12.0
Summation 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Targa 12.0.2
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
U3D 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Underpainting 12.0
Vanishing Point 12.0
Variance 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Variations 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Video Preview 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
Wavefront|OBJ 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
WIA Support 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
Wind 12.0.2
Wireless Bitmap 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch])
ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
Flash
Mini Bridge
Access CS Live
CS News and Resources
Flash
Kuler
CS Review
Installed TWAIN devices: NONE
Illustrator:
Components:
ACE 2010/06/28-18:09:25 61.435133 61.435133
Adobe APE 2010/02/23-12:40:58 61.421986 61.421986
Adobe Linguisitc Library 5.0.0
Adobe Owl 2010/03/08-15:17:17 3.0.89 61.423383
Adobe Owl Canvas 3.0.68 61.2954
PDFL 2010/10/18-23:35:06 64.341419 64.341419
Adobe Product Improvement Program 5.0.0.2021
AdobePSL 64.699054_12.664233 64.699054_12.664233
Adobe XMP Core 5.0 61.134777
Adobe XMP Files 5.0 61.134777
Adobe XMP Script 5.0 61.134777
Adobe CAPS 3,0,116,0
Adobe OOBE Launcher 1.0.0.64 (BuildVersion: 1.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
AFL 1.0
AFlame 2010/10/04-23:36:11 64.443603 64.443603
AFlamingo 2010/10/04-23:36:11 64.436825 64.436825
AGM 2010/06/28-18:09:25 61.435133 61.435133
AdobeHelp Dynamic Link Library 1,5,0,30
AIPort 1.0 23.68434
Adobe EPIC 3.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08) 53.352460
AMTLib 3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
AMTServices 3.0.0.64 (BuildVersion: 3.0; BuildDate: Mon Jan 26 2010 21:49:00) 1.000000
ARE 2010/06/28-18:09:25 61.435133 61.435133
Adobe Illustrator 1.0
AsnEndUser Dynamic Link Library 1, 7, 0, 1
Unknown Name
AXE8SharedExpat 2010/02/23-17:27:33 61.421978 61.421978
AXEDOMCore 2010/02/23-17:27:33 61.421978 61.421978
AXSLE 2010/02/23-17:27:33 61.421978 61.421978
BIB 2010/06/28-18:09:25 61.435133 61.435133
BIBUtils 2010/06/28-18:09:25 61.435133 61.435133
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
CoolType 2010/06/28-18:09:25 61.435133 61.435133
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
DVA Product 5.0.0
ExtendScript 2010/03/05-08:21:15 61.423205 61.423205
Adobe XMP FileInfo 5.0 61.134777
FilterPort 1.1 61.435133
Microsoft® Windows® Operating System 6.1.7601.18120
International Components for Unicode 2009/12/05-11:25:03 Build gtlib_main.11277
International Components for Unicode 3, 4, 0, 0
International Components for Unicode 2009/12/05-11:25:03 Build gtlib_main.11277
International Components for Unicode 2009/12/05-11:25:03 Build gtlib_main.11277
International Components for Unicode 3, 4, 0, 0
International Components for Unicode 2009/12/05-11:25:03 Build gtlib_main.11277
JP2KLib 2010/02/24-17:43:58 61.131544 61.131544
Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession 2, 0, 1, 11
MPS 2010/02/24-17:43:58 61.421978 61.421978
Microsoft (R) Visual C++ 6.00.8168.0
Microsoft® Visual Studio .NET 7.10.3077.0
Microsoft® Visual Studio® 2005 8.00.50727.42
Microsoft® Visual Studio .NET 7.10.3052.4
Microsoft® Visual Studio® 2005 8.00.50727.42
Microsoft® Visual C++ 2.10.000
Microsoft® Visual C++ 4.00.5270
PDFPort 2010/06/28-18:09:25 61.435133 61.435133
Adobe PDFSettings 1.04
Adobe Photoshop CS5 CS5
Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 2.0.1.127
Adobe India Sangam Core Code 2010/02/03-18:48:35 61.129109 61.129109
Adobe India SangamML Import from Sangam 2010/02/03-18:48:35 61.129109 61.129109
ScCore 2010/03/05-08:21:15 61.423205 61.423205
Microsoft® Windows® Operating System 6.00.2600.0000
SVGExport 6, 0, 0, 0 1.0
SVGRE 6, 0, 0, 0 1.0
Adobe Updater Notifications Library 1.0.0.68 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 1.0.0.68
WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
ATE
OS: Windows
Version: 6.1
System Architecture: x86
Built-In Memory: 4043 MB
Application Folder:
C:\Program Files (x86)\Adobe\Adobe Illustrator CS5\Support Files\
Primary Scratch Folder:
C:\AITEMP\
Secondary Scratch Folder:
D:\AITEMP\
Plug-ins:
Live Menu Item
Adobe AI Application Plugin
Control Groups
Color Conversion
Composite Fonts
New Cache Plugin
AdobeLicenseManager
ZStringTable
Window Menu
Main Filters
Main File Formats
File Format Place EPS
AI File Format
Debug Menu
SLO Text Tool
Mesh Object
Document Window Plugin
Sweet Pea 2 Adapter Plugin
ADM Plugin
ASLib
AdobeActionManager
AILocalized Resources Plugin
FrameworkS
Art Converters v2
FlattenTransparency
FO Conversion Suite
Pathfinder Suite
PDF Suite
BRS Pencil Tool
Rasterize 8
AdobeSlicingPlugin
AdobeActionPalette
BeautifulStrokes Suite
AdobeBrushMgr
Adobe Color Harmony Plugin
Control Palette Plugin
Adobe Deform Plugin
AdobeLayerPalette
Adobe Planar Edit Plugin
AdobePaintStyle
PathConstruction Suite
AdobeSwatch_
AdobeToolSelector
Adobe Tracing Object
Adobe Custom Workspace
AdobeDiffusionRaster
Snapomatic
Adobe Geometry Suite
Flatten Suite
ShapeConstruction Suite
ExpandS
SWFExport
Photoshop Plugin Adapter Targa
Photoshop Plugin Adapter PNG
Photoshop Plugin Adapter Pixar
Photoshop Plugin Adapter PCX
Photoshop Plugin Adapter BMP
Photoshop Plugin Adapter Unsharp Mask...
Photoshop Plugin Adapter Smart Blur...
Photoshop Plugin Adapter Radial Blur...
Photoshop Plugin Adapter Pointillize...
Photoshop Plugin Adapter NTSC Colors
Photoshop Plugin Adapter Mezzotint...
Photoshop Plugin Adapter Gaussian Blur...
Photoshop Plugin Adapter De-Interlace...
Photoshop Plugin Adapter Crystallize...
Photoshop Plugin Adapter Color Halftone...
Photoshop Plugin Adapter Texturizer...
Photoshop Plugin Adapter Stained Glass...
Photoshop Plugin Adapter Patchwork...
Photoshop Plugin Adapter Mosaic Tiles...
Photoshop Plugin Adapter Grain...
Photoshop Plugin Adapter Craquelure...
Photoshop Plugin Adapter Glowing Edges...
Photoshop Plugin Adapter Water Paper...
Photoshop Plugin Adapter Torn Edges...
Photoshop Plugin Adapter Stamp...
Photoshop Plugin Adapter Reticulation...
Photoshop Plugin Adapter Plaster...
Photoshop Plugin Adapter Photocopy...
Photoshop Plugin Adapter Note Paper...
Photoshop Plugin Adapter Halftone Pattern...
Photoshop Plugin Adapter Graphic Pen...
Photoshop Plugin Adapter Cont^e Crayon...
Photoshop Plugin Adapter Chrome...
Photoshop Plugin Adapter Charcoal...
Photoshop Plugin Adapter Chalk && Charcoal...
Photoshop Plugin Adapter Bas Relief...
Photoshop Plugin Adapter Ocean Ripple...
Photoshop Plugin Adapter Glass...
Photoshop Plugin Adapter Diffuse Glow...
Photoshop Plugin Adapter Sumi-e...
Photoshop Plugin Adapter Sprayed Strokes...
Photoshop Plugin Adapter Spatter...
Photoshop Plugin Adapter Ink Outlines...
Photoshop Plugin Adapter Dark Strokes...
Photoshop Plugin Adapter Crosshatch...
Photoshop Plugin Adapter Angled Strokes...
Photoshop Plugin Adapter Accented Edges...
Photoshop Plugin Adapter Watercolor...
Photoshop Plugin Adapter Underpainting...
Photoshop Plugin Adapter Sponge...
Photoshop Plugin Adapter Smudge Stick...
Photoshop Plugin Adapter Rough Pastels...
Photoshop Plugin Adapter Poster Edges...
Photoshop Plugin Adapter Plastic Wrap...
Photoshop Plugin Adapter Palette Knife...
Photoshop Plugin Adapter Paint Daubs...
Photoshop Plugin Adapter Neon Glow...
Photoshop Plugin Adapter Fresco...
Photoshop Plugin Adapter Film Grain...
Photoshop Plugin Adapter Dry Brush...
Photoshop Plugin Adapter Cutout...
Photoshop Plugin Adapter Colored Pencil...
Photoshop Plugin Adapter Filter Gallery...
Twirl v2
AdobeBuiltInToolbox
Adobe Symbolism
Simplify
ShapeTool
Segment Tools
Adobe Scatter Brush Tool
Reshape Tool
Magic Wand
Liquify
Lasso
Knife Tool
Adobe Flare Plugin
AdobeTextDropper
Adobe Eraser Tool
Adobe dBrush Brush Tool
Adobe Crop Tool
Adobe Calligraphic Brush Tool
BoundingBox
AdobeArtBrushTool
Smart Punctuation
TxtColumns
Spell Check Dictionary
Spell Check UI
Find Replace UI
TextFindFont
TypeCase
Adobe PSD File Import
Adobe PSD File Export
Photoshop Adapter
PerspectiveUI
TIFF File Format
PNG File Format
MPSParser
MPSExport
MPSCommon
Mojikumi UI
FXG UI
FXG
Adobe DXFDWG Format
ZigZag v2
Scribble v2
TextWrap Dlg
ShapeEffects v2
Adobe Scribble Fill
Saturate
Round v2
Roughen v2
Punk v2
AdobePathfinderPalette
Overprint
OffsetPath v2
AI Object Mosaic Plug-in
MaskHelper v2
Inverse
FuzzyEffect v2
Distort v2
Find
Expand
DropShadow
TrimMark v2
Colors
Cleanup
Adjust
AddArrowHeads v3
Add Anchor Points
Adobe Welcome Screen
AdobeTransparencyEditor
AdobeTransformObjects
Transform v2
Adobe Tracing UI
Adobe Symbol Palette Plugin
SVG Filter Effect v2
Stroke Offset v2
Services
SeparationPreviewPlugin
Scripts Menu
ScriptingSupport
Print Plugin
Adobe Perspective Guides
Adobe Nudge
AdobeNavigator
Adobe Path Blends
AdobeLinkPalette
Kinsoku Dlg
KBSC Plugin
GradientMeshPlugin
Flattening Preview
FileClipboardPreference
DocInfo
Character and Paragraph Styles
AI Bottlenecks Plugin
Asset Management
AdobeArtboardPanel
Adobe Art Style Plugin
Adobe App Bar Controls Host
Alternate Glyph Palette
AdobeAlignObjects
3D v2
PDF File Format
ADMEveParser PlugHi Mylenium,
The program just loads useless to use your words when I try to pass a file from Illustrator to Photoshop and when I click anywhere in Illustrator I get Program "Not responding" it doesn't crashes (stops) it stais opened but it doesn't do anything so I need to close it by force from task manager because I can't do anything with it.... Once I left it over night to save an important file and just in the morning I managed to do that so after a while it comes round but all the time there are different periouds of pending. Anyway this is not normal and I should be able to use the program in normal parameters with a powerful system.
I don't have any processor over load in the task manager I don't have anything unusual that indicates an over load of information, that's my problem. My guess is that I have a system incompatibility but I don't know where so that's why I asked for Adobe's help. Again I didn't had this problem using the same pack (CS5) with a less powerful system...
If there are any creash logs pelase tell me where can I find them ? -
How to Pass internal table from a program to Samrt form
Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
PraveenHai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b. -
Problem showing images from UISlider
I'm trying to get some images shown responsively as the user slides a slider, If I set up my image on each call of SliderValueChanging (the selector for control event UIControlEventValueChanged), as below, then I get an error indicating there's an event after I've released it.
UIImage *btnimg = [UIImage imageNamed:imagefile];
[button setImage:btnimg forState:UIControlStateNormal];
[btnimg release];
The error occurs while the user is still using the slider and the message is:
[UIImage _isResizable]: message sent to deallocated instance
So I thought I'd store my images until the user has finished using the slider and release them then. So I build them up in an array in SliderValueChanging as below:
UIImage *btnimg = [UIImage imageNamed:imagefile];
[button setImage:btnimg forState:UIControlStateNormal];
// assign into our array for later release...
if ( self.tmpimages == nil ) {
//Initialize the array.
self.tmpimages = [[NSMutableArray alloc] init];
[self.tmpimages addObject:btnimg];
[btnimg release];
and then release them in SliderValueChanged (the selector for control event UIControlEventTouchUpInside)
// tidy up our tmp images from sliding...
if ( self.tmpimages != nil ) {
[self.tmpimages removeAllObjects];
[self.tmpimages release];
self.tmpimages = nil;
The sliding then works without any problems but I get an error when the sliding is finished indicating I'm trying to release an object which I've already released.
[UIImage release]: message sent to deallocated instance
The error is being generated from the releaseAllObjects call.
What am I doing wrong? Can I prevent either of these error scenarios so that I get my images to show responsively with the slider without any problems?
Thanks!Under the Cocoa naming conventions objects returned by convenience methods like:
UIImage *btnimg = [UIImage imageNamed:imagefile];
are passed you autoreleased. You should not send a release to this object and the errors you're getting reflect this. If you add it to an array this will add to the retain count but you should not release it after adding it to the array - just add it.
The magic words in Cocoa are alloc, copy and new. If you use these words when you create it then you own it. If not assume something else owns it and will do the right thing. If you release something you don't own (or have explicitly retained) you're stepping on the process and you'll get errors like the ones you're getting.
HTH,
=Tod -
Retrieve multiple images from database to servlet
Hi there,
I try to retrieve more than one images from database to Servlet/JSP . However, I get only one images in the result set. Here is my code. Please Help .
How do I display more than one images ( multiple rows ) from database to Servlet ?.
When I retrieve, I got 3 rows of binary data, but I don't know how to display it on the Servlet/JSP pages.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import com.sybase.jdbcx.*;
public class RetrievePhoto extends HttpServlet {
static ResultSet rs;
static CallableStatement NGSstmt = null;
static Connection NGScon = null;
static SybDriver _driver = null;
public void doGet(HttpServletRequest req, HttpServletResponse res) throws
ServletException, IOException {
ServletOutputStream os = res.getOutputStream();
String driver = ""
String URL = "";
String Host = "";
String UN = ""; //assign your username here
String PW = ""; //assign your password here
try {
Class c = Class.forName( driver );
_driver = (SybDriver) c.newInstance();
DriverManager.registerDriver( (SybDriver) _driver );
NGScon = DriverManager.getConnection( URL + Host, UN, PW );
} catch ( SQLException e ) {
os.println( "Unable to load the Sybase JDBC driver. " + e.toString() );
e.printStackTrace(System.out);
} catch (java.lang.Exception ex) {
// Got some other type of exception. Dump it.
os.println("Exception - java lang " + ex.getMessage() );
String PID = req.getParameter("PID"); //passing parameters from Servlet
try {
String SQLcmd = "{call RET_PHOTO_BY_PID(?)}";
NGSstmt = NGScon.prepareCall( SQLcmd );
//execute the query
synchronized (NGSIDBstmt)
NGSstmt.setString(1, PID); //passing parameter to store procedure
rs = NGSstmt.executeQuery();
byte[] stuff = new byte[1024];
int bytesRead = 0;
res.setContentType("image/gif");
InputStream is = null;
// Get the first row
while( rs.next() ) {
is = rs.getBinaryStream("PHOTO");
res.setContentLength(is.available());
for (int i=0;; i++) {
bytesRead = is.read(stuff);
os.write(stuff);
if ( bytesRead == -1 ) break;
rs.close();
os.flush();
os.close(); //close outputstream
} catch ( SQLException sqle) {
os.println("Error in SQL2Exception" + sqle.getMessage());When I retrieve, I got 3 rows of binary data, but I don't know how to display it on the Servlet/JSP pages.I will pick this bit of your post, because you seemed to have several partly-overlapping questions.
You are going about this wrong. You need to decide what your HTML will look like before you start writing servlet code. In this case you want to have something like a table, with an image in each row, right? Now what does the HTML for that look like? It's a <table> element, and so on, but what about the images? Well this is HTML, so it can't contain the binary images. It has to contains links to the images, and the browser will download the image from each of those links and put all of the downloads together into the page it displays.
That means you can't do it all with one servlet. You need a main servlet that generates the HTML, with the <table> element and the links to the images. Probably you need some DB calls here to find out how many images you're going to have, but you don't need to get them in this servlet. You just need to generate a link for each of them.
Then you need a second servlet that gets an image. It's going to get a single row from the DB and return the binary image you read from that row. Make sure to use "image/jpg" or whatever's appropriate instead of "text/html" in your response's content type here.
I will leave you to carry on from here. First step is to design the HTML that your main servlet will produce; remember that the links it generates need to carry enough information for the second servlet to be able to find the right image in the DB.
PC² -
Can i use labview to capture and process images from ip cameras connected to a switch.
Hi,
i have more then one ip cameras conneted in LAN by a switch. i have a PC conneted to same switch. is it possible to capture images from these ip cameras and process them(for example performing simple barcode scan or QR-code scan or OCR)? Which IP cameras will be supported?There is functionally no difference whether the camera is connected directly to the system or via a switch. Both should work the same. The only real requirement that you'd need to care about is whether the switch can pass multicast UDP traffic correctly (this is used for network discovery of IP cameras). Generally all unmanaged switches (probably what you are using) will treat multicast traffic identical to broadcast traffic, but some managed switches/routers may need to be configured to pass multicast.
Eric -
How to Increase Number of Images from 500 in a LR3 Flash Gallery
I noticed people asking (and I myself needed to know) so I thought I would explain how to increase the number of images (from 500) in a Flash gallery in Light Room 3
1. I exported a Flash gallery from LR3 and it capped the gallery at 500 images.
2. Because I had roughly 600 images to put in the gallery, I exported the remaining 100 as a separate flash gallery. (Going ahead and exporting 2 galleries will save you headache in a later step)
3. I combined all the images folders (copying "large" images from one folder to the "large" folder in the gallery I want to upload to my site, etc.) so that the files are all in one location.
4. The next step is to increase the gallery maximum in the code. Access (from the exported gallery) GALLERYNAME/resources/mediaGroupData/group.xml and open the group.xml file. The line of code you will be changing is <media totalGallerySize="500"> Change the 500 to the number of photos you want in the gallery.
5. This next step isn't too complicated, but it is specific. You know have to tell that flash file to look for the images you just transferred to the images folder. The best way to do this is to open the group.xml file for the second gallery you exported. Copy all the code beginning with <item> to the bottom of the page. This code tells the gallery to look at your specific images (Note: you'll notice within each item the names of your image file)
6. Return to the (other) group.xml file of the gallery you plan to use (with all your images in it). Scroll to the bottom and erase the lines </media> and </mediagroup> becaue you will repaste them in a moment. Next, paste the copied code there.
7. Save & check your browser!
I hope this was clear...please comment back and I'll clarify if needed.
ro500 images in a single gallery is too many - think of the poor viewer!
But if you must create Flash galeries with more than 500 images, you're better off editing the underlying engine - here's one link showing how to do it -
How do I remove background images from a PDF? Using Adobe Acrobat 6.0 Standard.
I have a file I need to print off, but the document is 100 pages lond and each page as a very obnoxious background image that makes it difficult to read the content, and I really don't want to waste the ink.
I have tried a few things with no luck:
-Tried replacing document background color in the 'Accessibility' tab in preferences.
-Tried unchecking the 'Display large images' field in the 'Page Display' tab in preference - this leaves a dark gray background that I can't get rid of, which is almost as bad as the original image.
-Tried several combinations under the 'Color Management' tab in preference to lessen the gray background achieved from the previous step. I can only brighten the shade slighty, but there is still a fair amount of gray background.
I just want a white background, or a clear background, and I have not seen any article or help topic on how to accomplish this. Please help!
MikeYou might want to see if you can select the background with the object touchup tool. If so, can you then just delete the selected object. May take a while to go through the document, but if it solves the problem you are ahead. You may be able to select it with JavaScript and repeat the process. My point of using the object touchup tool is that it may not be a background set by Acrobat, but something that is simply labeled as an image from the Acrobat viewpoint.
-
Displaying image from database in report
I need to include a picture (company logo) in numerous reports. This logo will be stored in an MS SQL Image field in a table (this bit I have already sorted out).
What I'm wondering is, what is the best way to retrieve this image from the database? Do I just include it in the view the report runs off? I'm hesitant to do this, as the view may return back hundreds of records, which means (I think) it will be sending the image along with it hundreds in time.
In short:
1) What is the best way to pass an image to a report.
2) If I include the Image field in a view which returns back hundreds of line, will the image be returned also hundreds of time, causing network congestion/performance issues?
3) If so (2), is there a way of sending the image only once, no matter how many rows are in the returned view?
Thanks.Hi Shanon,
We can display the image by making it a local copy on your machine.
If it is possible to get the image saved on local copy.
If we place the image in detail section then it would return one record.
As the image is from Database, so it would hit the database very time when you refresh the report and place it in Report Header or report fotter.
So, place your logo as an OLE object in report and would reduce processing time.
Regards,
Naveen. -
Safari used to let me drag an image from a webpage to the finder and have the dragged file be saved as an actual image but now all that's saved is a webloc file. I want the image saved, not a reference to the image's URL - do I now have to always use "save as" to save it?
I can understand Safari creating a webloc file if I dragged the site icon from the location bar to the finder, but to make the default behavior for dragging things that are parts of a page (not the page itself) as webloc files seems like a HUGE step backwards for usability.
Does anyone know if there's, say, a key to hold when dragging to avoid saving a webloc file or a defaults command or something to make Safari revert back to sane draging behavior?Good questions... I'll have to try and figure out when the problem first happened - I was thinking it was when I upgraded to Safari 5.1.4 but that might not be the case... I'll try your suggestions to see if any of them eliminate the problem (I have restarted recenlty and that didn't fix it) but I'll try repairing permissions,etc. Thanks!
hmmm... Mcbuffy: are you implying that you *don't* get the webloc when dragging an image out of Safari and that this isn't a caused by change to Safari but is a big/conflict in mine?
Maybe you are looking for
-
Hyperlinks in linked Word documents don't work
Hello All, I'm having a problem with hyperlinks and I'm hoping you can help me. I have a RoboHelp HTML 8 project built out of Word 2007 linked files. There's a dozen Word files right now, but I'm hoping to scale up the project eventually. Each file i
-
Hello everyone, I just purchased ilife06. I am running in Panther. I am using one of the themes with the 3d moving pictures thru the foreground. I added 2 videos, and then a submenu that leads to another page so that the audience can choose 4 more vi
-
Hi I just interested in try to install Oracle Database 10g Release 2 (10.2.0.4.0) on my Mac Book Pro http://www.oracle.com/technetwork/database/10204macsoft-x86-64-092720.html I downloaded it and try, but it seem doesn't work. Will it must install it
-
Why do a lot of the Themes not work with Firefox 4.0?
Just upgraded to 4.0 and looking for a theme to use, but alot of them are grayed out and says not compatible with version of Firefox I am running.
-
I was asked to install a new version of adobe reader, but when I started the download it froze . Now I cannot open any .exe file.