Passing ALL values to a single parameter

In Bi Publisher Report, I need to pass 'ALL' values to a single parameter
Here is brief explanation about my requirement,
I have 3 parameters
Parameter A,
Parameter B,
Parameter C
I have to pass ALL values to last parameter i.e; Parameter C and the rest should pass only single value, how should I do that?
Any help would be greatly appreciated.
Thank you

Hi,
have a look here: http://www.oracle.com/global/de/community/bip/tipps/dynamische_queries/index_en.html
This might give you an idea how to work with multi-value parameters.
Regards
Rainer

Similar Messages

How to pass multiple values to a single parameter in BW report URL

Hi Experts,
I am new to EP and learning .... i am stuck at one point where we need to pass multiple parameters to a BW report URL, this is the URL that we launch from BSP.... Suppose i have to pass different multiple values to a single parameter, how to do it....
i m getting many answers to pass parameters to iviews, reports, but not specific to my case.. can u plz help me....
Thanks in advance
Priya Rai

What is the prolem you are facing if you split the single date param as two parameters say startdate and enddate?
If you pass as single string then you might have to split the same at reciever end.
Are you trying any thing specific?

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Retrieving ALL values from a single restricted user property

How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");

Well, the code you've got will retrieve the single value of the property
for the current user. You're getting the default value because the
current user doesn't have Locations property set, so the ProfileWrapper
returns the default value from the property set.
I assume you want to get the list of available values that you entered
into the .usr file in Workshop. If so, I've attached a
SetColorController.jpf, index.jsp, and GeneralInfo.usr (put in
META-INF/data/userprofiles) I wrote for an example that does just this.
It uses the PropertySetManagerControl to retrieve the restricted values
for a property, and the jsp uses data-binding to create a list from that
pageflow method.
For a just-jsps solution, you can also use the
<ps:getRestrictedPropertyValues/> tag. I've attached a setcolor-tags.jsp
that does the same thing.
Greg
Dirk wrote:
How can I retrieve ALL values of a single restricted user property from within
a .jpf file?
I want to display a dropdown list within a form in a JSP which should contain
all the locations listed in the property 'locations'. I ever get just the default
value when I access the property via
ProfileWrapper pw = userprofile.getProfileForUser(user);
Object prop = pw.getProperty("ClockSetup", "Locations");
[att1.html]
package users.setcolor;
import com.bea.p13n.controls.exceptions.P13nControlException;
import com.bea.p13n.property.PropertyDefinition;
import com.bea.p13n.property.PropertySet;
import com.bea.p13n.usermgmt.profile.ProfileWrapper;
import com.bea.wlw.netui.pageflow.FormData;
import com.bea.wlw.netui.pageflow.Forward;
import com.bea.wlw.netui.pageflow.PageFlowController;
import java.util.Collection;
import java.util.Iterator;
* @jpf:controller
* @jpf:view-properties view-properties::
* 
* <view-properties>
* <pageflow-object id="pageflow:/users/setcolor/SetColorController.jpf"/>
* <pageflow-object id="action:begin.do">
* <property value="80" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="action:setColor.do#users.setcolor.SetColorController.ColorFormBean">
* <property value="240" name="x"/>
* <property value="220" name="y"/>
* </pageflow-object>
* <pageflow-object id="action-call:@page:index.jsp@#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="240,240,240,240" name="elbowsX"/>
* <property value="144,160,160,176" name="elbowsY"/>
* <property value="South_1" name="fromPort"/>
* <property value="North_1" name="toPort"/>
* </pageflow-object>
* <pageflow-object id="page:index.jsp">
* <property value="240" name="x"/>
* <property value="100" name="y"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#index.jsp#@action:begin.do@">
* <property value="116,160,160,204" name="elbowsX"/>
* <property value="92,92,92,92" name="elbowsY"/>
* <property value="East_1" name="fromPort"/>
* <property value="West_1" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="forward:path#success#begin.do#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
* <property value="204,160,160,116" name="elbowsX"/>
* <property value="201,201,103,103" name="elbowsY"/>
* <property value="West_0" name="fromPort"/>
* <property value="East_2" name="toPort"/>
* <property value="success" name="label"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.ejb.property.PropertySetManager#propSetMgr">
* <property value="31" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="control:com.bea.p13n.controls.profile.UserProfileControl#profileControl">
* <property value="37" name="x"/>
* <property value="34" name="y"/>
* </pageflow-object>
* <pageflow-object id="formbeanprop:users.setcolor.SetColorController.ColorFormBean#color#java.lang.String"/>
* <pageflow-object id="formbean:users.setcolor.SetColorController.ColorFormBean"/>
* </view-properties>
public class SetColorController extends PageFlowController
* @common:control
private com.bea.p13n.controls.ejb.property.PropertySetManager propSetMgr;
* @common:control
private com.bea.p13n.controls.profile.UserProfileControl profileControl;
/** Cached possible colors from the User Profile Property Set definition.
private String[] possibleColors = null;
/** Get the possible colors, based upon the User Profile Property Set.
public String[] getPossibleColors()
if (possibleColors != null)
return possibleColors;
try
PropertySet ps = propSetMgr.getPropertySet("USER", "GeneralInfo");
PropertyDefinition pd = ps.getPropertyDefinition("FavoriteColor");
Collection l = pd.getRestrictedValues();
String[] s = new String[l.size()];
Iterator it = l.iterator();
for (int i = 0; it.hasNext(); i++)
s[i] = it.next().toString();
possibleColors = s;
catch (P13nControlException ex)
ex.printStackTrace();
possibleColors = new String[0];
return possibleColors;
/** Get the user's favorite color from their profile.
public String getUsersColor()
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
return profileControl.getProperty(profile, "GeneralInfo", "FavoriteColor").toString();
catch (P13nControlException ex)
ex.printStackTrace();
return null;
// Uncomment this declaration to access Global.app.
// protected global.Global globalApp;
// For an example of page flow exception handling see the example "catch" and "exception-handler"
// annotations in {project}/WEB-INF/src/global/Global.app
* This method represents the point of entry into the pageflow
* @jpf:action
* @jpf:forward name="success" path="index.jsp"
protected Forward begin()
return new Forward("success");
* @jpf:action
* @jpf:forward name="success" path="begin.do"
protected Forward setColor(ColorFormBean form)
// set the color in the user's profile
try
ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
profileControl.setProperty(profile, "GeneralInfo", "FavoriteColor", form.getColor());
catch (P13nControlException ex)
ex.printStackTrace();
return new Forward("success");
* FormData get and set methods may be overwritten by the Form Bean editor.
public static class ColorFormBean extends FormData
private String color;
public void setColor(String color)
this.color = color;
public String getColor()
return this.color;
[GeneralInfo.usr]
[att1.html]

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

Passing all values to the child report in OpenDoc - XIR3.1

Hi all
in XIR3.1
iam able to write the open document syntax and also able pass some prompts i wanted like month, year, ID,... etc
am able to pass and open a child report based on parameters when i select one value of those fields from dropdown in drill mode
my requirement is if i select All Months or All Years from the dropdown it should generate a child report based on All Years Parameter can we do this
Any ideas please
Thanks in advance

You may refer to the article:
http://wiki.sdn.sap.com/wiki/display/BOBJ/WebItrick-drillamongmultiplereports
And you will find out the way to transfer the all value.

Passing CURR value to screen using PARAMETER ID's

Hi all,
I need to pass a value which is of type CURR to a screen field which is of type DEC using parameter id. As of release 6.10 only character-type field is expected to pass to screen fileds. I tried converting the CURR field to char type and pass the same to screen field,but didnt work as in the screen filed it expects some value with typr DEC.
Thanks in advance!

Hi Rob,
while debugging the code i can see the values of pid in SAP memory, but when i run the program to display those values on the screen field with type DEC,it kicks me out of the system.I commented that part of code and exceuted the program and then it went fine so i am for sure that it goes wrong at this part of the code.
Regards,
Sireesha
Edited by: Sireesha on Sep 24, 2010 11:37 AM

Passing 'ALL' value into Two Parameters in SAP Crystal Reports

Hi,
I have one report made it from sql command in that there is 2 parameters one is C_Type and other is C_Type_HV both shows the records like 01,02,03,05 both the parameters are used in command where clause and also that report contain one sub report for showing summary made it from sql command in that command both the parameters are passing through where clause of command now i want to add 'ALL' as a value in both the parameters how i can do this in sap crystal report.
for referance I give u both the query of report
With Regards,
Ganesh

Hi Ganesh,
Please have a look at this thread on how to add 'ALL' as a value for the prompt.
All values in parameter
-Abhilash

How to pass all values from one node element to created node element?

Hi
I have model node element under which there are 7 values, and I've created value node element and trying to pass the values from the model node Element to this value node element. But instead of passing all the values its listing only one value.
How do we rectify this problem!!!
Thanks in Advance
Srikant

Hi Anil
I've created the node named: TableNode
and the name of the node from which i want to get the data is : Li_Required_Node
the Node Structure is
Context
|_ Zs_Quantity_Input
     |_Output
       |_Node_Required_Node
          |_Schddt
|_TableNode
    |_CmpDate
The Schddt has some 7 values
The code Snippet is as follows:
IPublicPricesComp.ITableNodeElement nodeElement;
IPublicPricesComp.ILi_Required_NodeElement scheduleElement;
int counter3Max = wdContext.ILi_Required_Node().size();
for( int counter3= 0 ; counter3 < counter3Max ;counter3++ )
nodeElement = wdContext.createTableNodeElement();
                         scheduleElement = wdContext.nodeZs_Quantity_Input().nodeOutput_Contract_Qty().nodeLi_Required_Node().getLi_Required_NodeElementAt(counter3);
nodeElement.setCmpDate(scheduleElement.getSchddt());
wdContext.nodeTableNode().addElement(nodeElement);
On writing the above code and then binding the node to a table column only one value getting displayed
Where can be the error?
Thanks in Advance
Srikant

How can i pass multiple values by a single variable to EXECUTE IMMEDIATE

Hi All,
I want to pass multiple values for where condition for execute immediate. Something Like this:-
bold
Declare
v_cond varchar(1000);
Begin
v_cond := '''INR','USD'''; --(OPTION 1)
v_cond := 'INR,USD'; --(OPTION 2)
EXECUTE IMMEDIATE 'Delete from table where colm in (:v_cond)' using v_cond;
END;
bold
I am using this into a procedure
Now option 1 gives an error ie a syntax error (; expected or something like that)(I am sorry, i can't tell the exact error here as i am not in the office right now)
and option 2 makes the procedure execute but obviously doesn't delete the records, as it takes the whole as one.
Please Help
Regards
Neeraj Bansal

See the links containing examples under
*7. List of values in an IN clause?*
SQL and PL/SQL FAQ
from the SQL and PL/SQL FAQ.

How to pass input value to the IN parameter in a function

Hi ,
I'm new to pl/sql programming.
The below function is used inside a package and the package is invoked in visual studio.
The function uses 2 input parameters.
Out of which 'in_report_parameter_id' value comes thru job processor service 's job request.
The second IN paramter values are hard coded in the function.
I'm not able to understand this.
If the values are hard coded , how to make sure that only the hard coded values are the right ones?
Please anyone could explain to me?
I really dont have good idea about how to pass INPUT parameter to the functions or procedure
Is there any nice document which could give me good understanding about what are the ways or types we could pass values to the input parameter in subprograms?
thanks in advance.
CREATE OR REPLACE FUNCTION get_class_text_str
     in_report_parameter_id IN NUMBER,
     in_which                IN VARCHAR2 DEFAULT 'SELECT'
RETURN VARCHAR2
IS
         end_text            VARCHAR2 (50)   := '';
         my_class_text_str VARCHAR2(10000) := '';
         my_class_value_str VARCHAR2(10000) := '';
     CURSOR class_text(c_1_text VARCHAR2, c_2_text VARCHAR2) IS
     SELECT c_1_text || report_parameters.report_parameter_value
                           || c_2_text
                           || report_parameters.report_parameter_value
                           || '" '
      FROM report_parameters
     WHERE report_parameters.report_parameter_id     = 3690
       AND report_parameters.report_parameter_group = 'CLASS'
       AND report_parameters.report_parameter_name   = 'CLASS'
GROUP BY report_parameters.report_parameter_value
ORDER BY CAST(report_parameters.report_parameter_value AS NUMBER);
BEGIN
     IF (in_which = 'SUM') THEN
          OPEN class_text ( 'SUM(NVL("Class ', '", 0)) "Class ' );
     ELSIF (in_which = 'PERC')THEN
          OPEN class_text ( 'ROUND((("Class ', '" / "Total") * 100), 2) "Class ' );
          end_text := ', DECODE("Total", -1, 0, 100) "Total" ';
     ELSE
          OPEN class_text ( 'SUM(DECODE(bin_id, ', ', bin_value, 0)) "Class ' );
     END IF;
     LOOP
          FETCH class_text INTO my_class_value_str;
          EXIT WHEN class_text%NOTFOUND;
          my_class_text_str := my_class_text_str || ', ' || my_class_value_str;
     END LOOP;
     CLOSE class_text;
     my_class_text_str := my_class_text_str || end_text;
     RETURN my_class_text_str;
END get_class_text_str;
/Edited by: user10641405 on Nov 19, 2009 8:16 AM
Edited by: user10641405 on Nov 19, 2009 8:30 AM

This is not a design I would use, but should work if coded properly. I would probably build a reference cursor query as text and use one open fetch and close.
You have 2 input parameters, in_report_parameter_id and in_which. I could not find where in_report_parameter_id was used in the program, but the value passed in for in_which is being used in IF logic to decide how to open the cursor. After the cursor is open rows are being fetched and eventually the cursor is closed.
The values in_which are compared to are hard-coded. It is the programmer's job to make sure the values listed are the right values and the actions taken are also correct. Your program is assuming that if the first 2 values are not encountered the third one listed is the one you want.
To pass input values to a procedure you merely provide the values as a literal or variable in the call, something like
whatever := get_class_text_str(1,'SELECT');

How to pass multiple MDX values for a single parameter into a drill-through report?

I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so! I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD. Depending on which link the
user selects, the report simply calls itself and needs to pass in the parameter value for Active week. If it's active week, the parameter value will simply be "true". If it's YTD, the parameter value needs to be both "True" and "False" so the current
week's data is accounted for as well. I've set everything up except for the final step, and I have no idea what to type into the Value field below. I've tried different things: false, as you see below (it errors saying I'm missing the parameter
value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value). Nothing is working.
So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
To answer your initial questions, you are correct with both your assumptions:
1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
So in following your instructions, well that's the problem I'm not quite following :)
1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden? If so, I've done this.
2) I'm not quite sure where to use the statement you provided me. You said to put it in the dataset, but I don't know which dataset. I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
as a parameter). If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties. I tried this, and it did not generate any errors, but it also kept my report groups from displaying
-- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there. When I did this and ran the report, I would get the following error:
The 'SchoolDaysActiveWeek' parameter is missing a value
So what am I missing!?
Also, thanks for taking the time to respond!!

Why does SQL bring back all values in a single condition quicker?

Hi All,
I've stumbled across an interesting yet frustrating problem with one of our Discoverer Reports. The problem unfortunately is related to performance, which can be a never-ending struggle, as we all know.
Scenario:
We have a report that contains multiple outer joins that retrieves information from other sub ledgers. The type of report is tabular and it has a single page item called period name. A parameter has been setup on the period name column, which allows users to specify which period they want to report on. This is a real time report transaction report.
Problem:
The report takes various times to run depending on the amount of periods selected via the parameters. Timings are shown below –
All Periods                         – 2 min 22 sec     (36 Periods selected – 7 have data)
Apr                              - 0 min 43 sec           (01 Periods)
Apr + May                         - 1 min 06 sec      (02 Periods)
Apr + May + Jun                         - 1 min 36 sec      (03 Periods)
Apr + May + Jun + Jul                     - 2 min 29 sec      (04 Periods)
Apr + May + Jun + Jul + Aug               - 3 min 15 sec      (05 Periods)
Question:
I’m finding it very hard to understand why the time taken to run the report for 5 periods IS NOT quicker than running the report for all periods because the condition/where clause would have been refined?
I can confirm that the Period column is indexed. I’m not going to post the execution plans, as each are 117 rows long. I’m rather hoping some of you might have experienced something similar, and therefore able to point me in the right direction.
Thanks,
Lance

Hi Rod,
Looking at the SQL generated in Discoverer this is what I get for All Periods:
Where ‘…….’
AND (o227124.i227127 IN ('MAR-07','FEB-07','JAN-07','DEC-06','NOV-06','OCT-06','SEP-06','AUG-06','JUL-06','JUN-06','MAY-06','APR-06','MAR-06','FEB-06','JAN-06','DEC-05','NOV-05','OCT-05','SEP-05','AUG-05','JUL-05','JUN-05','MAY-05','APR-05','MAR-05','FEB-05','JAN-05','DEC-04','NOV-04','OCT-04','SEP-04','AUG-04','JUL-04','JUN-04','MAY-04','APR-04','MAR-04','FEB-04','JAN-04','DEC-03','NOV-03','OCT-03','SEP-03','AUG-03','JUL-03','JUN-03','MAY-03','APR-03','MAR-03','FEB-03','JAN-03','DEC-02','NOV-02','OCT-02','SEP-02','AUG-02','JUL-02','JUN-02','MAY-02','APR-02','MAR-02'))
Statistics For All Periods
351 recursive calls
0 db block gets
     32301 consistent gets
61 physical reads
0 redo size
500 bytes sent via SQL*Net to client
13147 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
0 rows processed
And this is what I get for 6 Periods
AND (o227124.i227127 IN ('AUG-06','SEP-06','JUL-06','JUN-06','MAY-06','APR-06'))
Statistics For 6 Periods
351 recursive calls
0 db block gets
32301 consistent gets
7 physical reads
0 redo size
509 bytes sent via SQL*Net to client
11736 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
0 rows processed
Looking at the statistics the ‘All Periods’ query should take longer than the 6 periods, however this is not the case.
Thanks,
Lance
Message was edited by:
Lance Botha

Passing ALL values to a single parameter

Similar Messages

Maybe you are looking for