Passing 'ALL' value into Two Parameters in SAP Crystal Reports

Hi,
I have one report made it from sql command in that there is 2 parameters one is C_Type and other is C_Type_HV both shows the records like 01,02,03,05 both the parameters are used in command where clause and also that report contain one sub report for showing summary made it from sql command in that command both the parameters are passing through where clause of command now i want to add 'ALL' as a value in both the parameters how i can do this in sap crystal report.
for referance I give u both the query of report
With Regards,
Ganesh

Hi Ganesh,
Please have a look at this thread on how to add 'ALL' as a value for the prompt.
All values in parameter
-Abhilash

Similar Messages

How to pass variable value into module pool scren from a report program

Hi,
I have created a report program with selection screen parameters. when the inputs are filled and executed it generates the purchase evaluation sequence number. i have created a screen and passed that number to display on it with print option and back option buttons as required. but variable alone is not getting passed from the program to module pool screen. buttons are working fine. value alone is not coming. can anyone please help me.
regards,
sudha.

Hi ,
you need to declare that variable param at Global.
sample code...
report xyz....
data: g_no type ekko-ebeln.
start-of-selection...
g_no = '12345'.
call screen 0100.

I am facing a problem in passing multiple values as out parameters from fo

Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.

user9041629 wrote:
Hi All,
i am facing a problem in passing multiple values as out parameters from for loop.
EX:
i have a select statment inside a loop like.....
PACKAGE SPEC:
create or replace PACKAGE EMP_PKG AS
TYPE TAB_NUM IS TABLE OF SCOTT.EMP.EMPNO%TYPE;
TYPE TAB_NAME IS TABLE OF SCOTT.EMP.ENAME%TYPE;
TYPE TAB_JOB IS TABLE OF SCOTT.EMP.JOB%TYPE;
temp_table TAB_NUM;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB);
END EMP_PKG;
PACKAGE BODY:
create or replace PACKAGE BODY EMP_PKG AS
v_e_no NUMBER;
procedure test(temp_TAB_e_no OUT TAB_NUM,
temp_TAB_e_name OUT TAB_NAME,
temp_TAB_e_job OUT TAB_JOB) IS
BEGIN
select EMPNO bulk collect into temp_table from emp;
for i in 1..temp_table.count loop
v_e_no := temp_table(i);
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
end loop;
end test;
END EMP_PKG;
PROBLEM FACING IS:
I am expecting all rows returning from bellow select statment ...
select empno,
ename,
job
into temp_TAB_e_no(i),
temp_TAB_e_name(i),
temp_TAB_e_job(i)
from emp
where empno = v_e_no;
But,while running the SP , i am getting error like
ORA-06531: Reference to uninitialized collection
ORA-06512: at "SCOTT.EMP_PKG", line 16
why i am not getting all values as out parameters.please provide a solution for me.
Thanks in advance my friend.Probably not a bad thing that this isn't working for you.
This is a horrible way to return the contents of a table.
Are you doing this for educational purpose, or ... what is your goal here? If you just want to return a result set to a client you'd want to look in to using a REF CURSOR and not a bunch of arrays combined with horribly procedural (slow) code.

Passing ALL values to a single parameter

In Bi Publisher Report, I need to pass 'ALL' values to a single parameter
Here is brief explanation about my requirement,
I have 3 parameters
Parameter A,
Parameter B,
Parameter C
I have to pass ALL values to last parameter i.e; Parameter C and the rest should pass only single value, how should I do that?
Any help would be greatly appreciated.
Thank you

Hi,
have a look here: http://www.oracle.com/global/de/community/bip/tipps/dynamische_queries/index_en.html
This might give you an idea how to work with multi-value parameters.
Regards
Rainer

How i can pass the value into 1 line

Hi expert,
how do i pass all the value for sales document flow item in one line?
i'm using this function
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
    EXPORTING
      aufbereitung = '2'
      belegtyp      = i_del-vbtyp
      comwa         = l_comwa
      nachfolger    = ' '
      vorgaenger    = 'X'
      v_stufen      = '50'
    TABLES
      vbfa_tab      = lt_vbfa
    EXCEPTIONS
      no_vbfa       = 1
      no_vbuk_found = 2
      OTHERS        = 3.
so now lt_vbfa already got data line by line....
line 1 : contract : 00010 : 1000000 : 19,000.00
line 2 : order     : 00010 : 2000000 : 10000.00
line 3 : delivery : 00010 : 3000000 : 10000.00
how i can pass the value into 1 line?
for example :
contract | line     | amount     | Order     | line     | amount    | delivery   | line     | amount     |
1000000 | 00010| 19,000.00 | 2000000 |00010 | 10000.00 | 3000000 | 00010 | 10000.00 |
Edited by: anuar jusoh on Aug 17, 2009 4:02 AM

Hi,
What is requirement for passing the data in a single line ? Do you finally need to append the same in the internal table and pass it in the module ?
You can create an internal table of type 1000 character and can loop the existing internal table. Then you can append the Work area in a single line and can finally append it to the table.
DATA : ITAB type standard table of char1000.
Loop at <existing table>.
concatenate table work area wa_char100 into Itab_char_1000.
endloop.
APPEND itab_char_1000 into itab.
Hope this helps.
Thanks,
Samantak.

I want to spit cell the value into two separate columns like f_name & l_nam

Hi Guys,
I have excel data in one cell with ',' separated data.
sample data:
empno ename
121 ravi,kann
232 ram,raman
here ename value in one provided in one cell.
Now i want to spit cell the value into two separate columns like first_name and last_name?
Thanks in advance
-LK

with sample_data as
select 121 empno, 'ravi,kann' ename from dual union all
select 232 empno, 'ram,raman' from dual
select empno,
       substr(ename,1,instr(ename,',')-1) first_name,
       substr(ename,instr(ename,',')+1) last_name
from sample_data;       or with regular expressions:
with sample_data as
select 121 empno, 'ravi,kann' ename from dual union all
select 232 empno, 'ram,raman' from dual
select empno,
       regexp_substr(ename,'^[^,]*') first_name,
       regexp_substr(ename,'[^,]*$') last_name
from sample_data; Edited by: hm on 04.07.2012 06:22

How can I pass a value into a page fragment?

How can I pass a value into a page fragment?
I am implementing four search screens. And the only thing different about them will be their backing bean.
So I’d like to do something like have four pages, each which retrieves its appropriate backing bean, sets that bean to a variable, and then includes a page fragment which contains the generic search page code (which will make use of that variable).
The code in the four pages would be something like this:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<c:set var="searchPageBackingBean"
value="#{pageFlowScope.employeeSearchPageBean}"
scope="page"/>
<jsp:include page="./SearchPageBody.jsff"/>
</jsp:root>
At this point, what I’m seeing is that the fragment page, SearchPageBody.jsff, has no visibility of the searchPageBackingBean variable, either referencing it as #{pageFlowScope.searchPageBackingBean} or just #{searchPageBackingBean}

The following will work, assuming you are needing to access a managed bean:
Put this in the parent page:
<c:set var="nameOfSearchPageBackingBean"
value="employeeSearchPageBean"
scope="request"/>
Put this in the child, SearchPageBody.jsff:
<c:set var="searchPageBean"
value="#{pageFlowScope[nameOfSearchPageBackingBean]}"
scope="page"/>

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to pass src value into img tag in ADF

Hi,
My Dev : 11.1.2.3.0
How to pass row values into <img> tag.,I used the below code but it's taking empty.,
I tried both ways like #{row.CdFilePath}   and   ${row.CdFilePath}
<af:iterator var="row"
                  value="#{bindings.xxx.collectionModel}"
                 id="i2">
     <img src='/ShowImage?src=#{row.CdFilePath}' border='0' style="width:100px; height:100px; margin:5px;"/>
</af:iterator>
Please tell me any other option is there..
Thanks

This works if you use a normal table so I guess it should work here too.
Are you sure the el #{row.CdFilePath} return something?
Why don't you use the adf image tag <af:image source="/ShowImage?src=#{row.CdFilePath}".../> instead of the html img tag?
Should the src property not be enclosed with " instead of your '?
Timo

Single column value into two column of report

Hi frnds,
I have a column of Adress in my databse table from where i have to fetch values and show it a report
able to get report but showing in single column if i take a printout paper will be wasted so I thought of passing these values to two different columns
please help me in giving some suggestions

In Oracle 9 you can get rid of the regex functions and use traditional SUBSTR, INSTR and REPLACE:
ABSOLUTELY NOT TESTED...
SELECT col1,SUBSTR ( ','||col2||',', instr(','||col2||',',',',lvl)+1,instr(','||col2||',',',',lvl+1)-instr(','||col2||',',',',lvl)-1)
FROM table_name,
       (SELECT LEVEL lvl
          FROM (SELECT MAX (LENGTH (REPLACE ( col2, ',',''))) mx
                  FROM table_name)
        CONNECT BY LEVEL <= mx + 1)
WHERE lvl - 1 <= LENGTH (REPLACE ( col2, ',',''));Max

How to store the value of sum of group in Crystal Report at the runtime!

Hello all,
I creates a Formula Field that hold the value of Sum of Group in Crystal Report. I would like to know how to store it in a variable and pass it to store procedure. Is it an option in Crystal report to do it. I knew that Crystal Report can cache the report for sharing. My detailed issue as following:
- Created a Formula Field named TOTAL AMOUNT that calculated the complex expression. This TOTAL AMOUNT is dynamic based on group and variables.
- I would like to store that value from TOTAL AMOUNT and pass it to the stored procedure parameter IN.
Any helps are much appreciated. Thanks.

I doubt that this is possible since it would only calculate this value once the report has data. This sounds more like a report design question that should be asked over [here|SAP Crystal Reports;

VS 2010 is crashing after installing SAP Crystal report 13.0.

HI Experts.
I have seen many thread related to crashing in VS2010. I feel i am also getting the same error msg.
"Msg:Object reference set to an instance of an object - (Mouse move event)."
I didn't see any proper fix on this issue and I think i can give proper steps to reproduce that, Thats the reason i am posting this as new thread.
Here is my report structure and senario,
I have a sub repot which will display all the parameters and its values which i am setting through my C# application.
i am using crystal report viewer to show my reports. once i click on the subreport i used to get seperate preview tab for my parameters list.. if i click on refresh from this view, on the time of refreshing the application will crash on mouse click in reports. especially on click of that waiting cusor(Which is not there in cr2008). Report will work fine if its load immediatly. problem happening only the reports are taking few time to get load.
In brief, When the report is loading, if we click any where in report,application crashes.
Note:I was using VS2010 and CR2008-Sp3 before. all of my 150 reports are working fine on that time. Last week i have updated CR2008 with SAP Crystal report 13.0. This issue stared after that.
Thanks in advance,
Salah.

Hi Don,
Thanks for your reply.
I worked on this to get proper scenario for reproducing this issue. one thing i observed that,
crash is happening regularly the places which i have registered mouse double click event in crystal report viewer. My guess is,While loading the report(On click of refresh), the viewer is empty(bank). That time if we do double click on the viewer its crashing. But confustion is getting error on mouse move event
Hope this will help you guys to reproduce the crash.
We people are really waiting to fix this issue asap. we are also woking in our application to catch the exception somehow. Will update you if i get any progress .
Here is my exception text,
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
   at System.Windows.Forms.Control.WmMouseMove(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.UserControl.WndProc(Message& m)
   at CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Thanks,
Salah.
Edited by: salahudheen muhammed on Feb 21, 2011 1:07 PM

SAP Crystal Report using SQL Server Authentication and Windows Authenticati

I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
    </div>
    </form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
    private const string PARAMETER_FIELD_NAME = "city";
    private ReportDocument customersByCityReport;
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = @"WKM1925-PCWKM1925";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.UserID = "sa";
        connectionInfo.Password = "sysadmin25";
        SetDBLogonForReport(connectionInfo);
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
    private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
        ParameterValues currentParameterValues = new ParameterValues();
        foreach (object submittedValue in arrayList)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = submittedValue.ToString();
            currentParameterValues.Add(parameterDiscreteValue);
        ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
        ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
    protected void Page_Load(object sender, EventArgs e)
        customersByCityReport = new ReportDocument();
        string reportPath = Server.MapPath("customersByCity.rpt");
        customersByCityReport.Load(reportPath);
        ConfigureCrystalReports();
        ArrayList arrayList = new ArrayList();
        arrayList.Add("paris");
        arrayList.Add("Madrid");
        arrayList.Add("Marseille");
        arrayList.Add("Buenos Aires");
        arrayList.Add("Sao Paulo");
        ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
        SetCurrentValuesForParameterField(customersByCityReport, arrayList);
        CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help me

Hello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don

Sap Crystal Report Max Print Exception

In Sap Crystal Report after 60 to 70 reports print report doesn't show. When I set registry value of PrintJobLimit from c# code then exception fire "User can't authorize or permit for edit".

Hi Adnan,
You have mentioned two issues here.
1. In Sap Crystal Report after 60 to 70 reports print report doesn't show
2. When I set registry value of PrintJobLimit from c# code then exception fire "User can't authorize or permit for edit".
The second is issue is likely your attempt to resolve the first.
As Don has mentioned the first issue is a resourcing issue.
Make sure you close, dispose report object to free the memory.
Try setting the printjoblimit registry key manually to some definite no... 200, 300 etc. see if it works,
Also when you say the report doesnt work, is there an error / exception thrown by the app?
Does this happen to a specific printer?
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Connection to database in sap crystal reports enterprise xi 4.0

Hi,
When we are trying to connect to database in sap crystal reports enterprise xi 4.0 ,i am geting the below error.please advise.
Error:
Failed to establish a connection.The cause was:
Connot connect to SAP BussinessObjects Enterprise at this time.Please try again later.

Thanks for your quick response Henry....
I checked all this things and all are working fine.
Now I am able to connect to BOE server.
The cause behind the issue was in "CMC > Applications > Web
Service > Access URL:" the URL was having different server name which we have changed earliar, I just correct the URL and issue got resolved.
But now when I am trying to access BOE Server through Crystal Reports for Enterprise 4.0 client tool directly not from launch pad, it probes me the same error. (Note: I used the same parameters which i got from launch pad token to this)
Is that a only way to use Crystal Reports for Enterprise 4.0 from launch pad ??

Passing 'ALL' value into Two Parameters in SAP Crystal Reports

Similar Messages

Maybe you are looking for