Passing complex XML to session EJB with automatic WSIF mapping

Per Re: invoking ejb using wsif
it looks like WSIF can pass DOM to EJB. Can anyone point me to an example using WSIF to pass a complex document to EJB uin the form of DOM, String or JAX-RPC?

We found couple of solutions for passing DOM to EJB :
1. you can create a facade java object and pass the facade to the ejb layer as a value object
2. you can extract the element for that anyType and pass that dom element to the ejb layer.
We will plan to add some samples around this.
HTH.
Thanks,
Rakesh

Similar Messages

Invoking Session EJB (with WSIF binding) from a BPEL process

Hi,
I am invoking a stateless session bean from a bpel process. The bpel process is throwing:
Failed to lookup EJB home using JNDI name 'ejb/visilient/BPELHelper'; nested exception is:
java.lang.NullPointerException
I can see the ejb jndi name under 'default' app.
Any ideas?
TIA

It is a lovely sample... However, it doesn't cover Complex Types and Exception handling. It would be nice if each example was thorough. Would be a great help.
What I was hoping to achieve is this:
1) Have an EJB deployed
2) Use WSIF for BPEL Processes.
3) Use Web Service interface for AJAX calls etc.
I was hoping that this would be the exact code base and that only a single EJB would be deployed.
So far, it looks like JDeveloper will only support Java WSIF bindings. No EJB Bindings. It also looks like JAXRPC is the best supported WS interface. With that in mind, it deploys a seperate subset of the EJB. Thus causing two seperate deployments. I am working on trying all this out over the next couple days. See where I get.
Anyways, do you have any recommendation for accomplishing what I am wanting to do? 1 deployed EJB, with a WS interface and allowing WSIF bindings. Any other references for me to look at? Should I not be thinking about using JDeveloper for any of the WSDL generation and do all this manually for now?
Thanks,
BradW

Problems integrating JSF managed bean with Session EJB with JDeveloper

HI All,
I am developeing a JSF-EJB application using Jdeveloper11g. On deploying the application I am getting the following errors on deployment.
<19/08/2010 2:53:49 PM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1282193629318' for task '17'. Error is: 'weblogic.application.ModuleException: Could not setup environment'
weblogic.application.ModuleException: Could not setup environment
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: [J2EE:160101]Error: The ejb-link 'MetaDataBean' declared in the ejb-ref or ejb-local-ref 'MetaData' in the application module 'ViewControllerWebApp.war' could not be resolved. The target EJB for the ejb-ref could not be found. Please ensure the link is correct.
     at weblogic.deployment.BaseEnvironmentBuilder.addEJBLinkRef(BaseEnvironmentBuilder.java:453)
     at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:485)
     at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
     at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
     Truncated. see log file for complete stacktrace
>
<19/08/2010 2:53:49 PM EST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'data-catalog'.>
<19/08/2010 2:53:49 PM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'data-catalog'.>
<19/08/2010 2:53:49 PM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Could not setup environment
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: [J2EE:160101]Error: The ejb-link 'MetaDataBean' declared in the ejb-ref or ejb-local-ref 'MetaData' in the application module 'ViewControllerWebApp.war' could not be resolved. The target EJB for the ejb-ref could not be found. Please ensure the link is correct.
     at weblogic.deployment.BaseEnvironmentBuilder.addEJBLinkRef(BaseEnvironmentBuilder.java:453)
     at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:485)
     at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
     at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
     at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
     Truncated. see log file for complete stacktrace
Thanks
Edited by: user5108636 on 18/08/2010 22:46

Please find attached the source code of JSF managed bean, local business interface, session bean and web.xml
MANAGED BEAN_
package view.backing;
import java.util.List;
import javax.ejb.EJB;
import javax.faces.component.UISelectItems;
import javax.faces.component.html.HtmlSelectManyListbox;
import model.ejb.session.MetaDataBean;
public class SearchMetaDataBean {
@EJB MetaDataBean metaDataService;
private List<String> tables;
private List<String> columns;
private HtmlSelectManyListbox selectManyListbox1;
private UISelectItems selectItems1;
public void setTables(List<String> tables) {
this.tables = tables;
public List<String> getTables() {
return metaDataService.getTables();
public void setColumns(List<String> columns) {
this.columns = columns;
public List<String> getColumns() {
return columns;
public void setSelectManyListbox1(HtmlSelectManyListbox selectManyListbox1) {
this.selectManyListbox1 = selectManyListbox1;
public HtmlSelectManyListbox getSelectManyListbox1() {
return selectManyListbox1;
public void setSelectItems1(UISelectItems selectItems1) {
this.selectItems1 = selectItems1;
public UISelectItems getSelectItems1() {
return selectItems1;
LOCAL INTERFACE_
package model.ejb.session;
import java.util.List;
import javax.ejb.Local;
@Local
public interface MetaDataLocal {
public List<String> getTables();
public List<String> getColumns(String tableName);
SESSION BEAN_
package model.ejb.session;
import javax.ejb.Local;
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.annotation.PostConstruct;
import javax.annotation.Resource;
import javax.ejb.Stateless;
import javax.sql.DataSource;
@Stateless(name="MetaData")
@Local
public class MetaDataBean implements MetaDataLocal{
@Resource(name="jdbc/DWDS")
private DataSource dataSource;
private Connection connection;
private List<String> tables = new ArrayList<String>();
private List<String> columns = new ArrayList<String>();
private DatabaseMetaData dmd;
@PostConstruct
public void initialize(){
try{
connection = dataSource.getConnection();
DatabaseMetaData dmd;
dmd = connection.getMetaData();
}catch(SQLException sqle){
sqle.printStackTrace();
public MetaDataBean() {
public List<String> getTables(){
try{
if (dmd ==null){
//System.out.println("Database meta data not available");
tables.add("None");
}else{
ResultSet rs = dmd.getSchemas();
ResultSet rs1 = null;
while(rs.next()) {
if (rs.getString(1).equalsIgnoreCase("AV_DATA")){
rs1 = dmd.getTables(null,rs.getString(1),"%",null);
while(rs1.next()) {
tables.add(rs1.getString(3));
}catch (SQLException sqle){
sqle.printStackTrace();
return tables;
public List<String> getColumns(String tableName){
try{
ResultSet rsColumns = dmd.getColumns("", "AV_DATA", tableName, null);
while(rsColumns.next()){
columns.add(rsColumns.getString(4));
}catch (SQLException sqle){
sqle.printStackTrace();
return columns;
WEB.XML_
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<ejb-local-ref>
<ejb-ref-name>MetaData</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local>model.ejb.session.MetaDataLocal</local>
<ejb-link>MetaDataBean</ejb-link>
</ejb-local-ref>
</web-app>
Edited by: user5108636 on 18/08/2010 22:45
Edited by: user5108636 on 18/08/2010 22:46

Session EJB with external jar dependacy problem

I have a Session EJB that I am having trouble adding to my Creator 2 project. The session bean is developed with netbeans 5.0, ejb2.1, for sjsas 8.2 PE. It has one external jar which is compiled into the ejb jar. When I try to add the session bean to my creator 2 project I get a java.lang.reflect.UndeclaredThrowableException. Creator 2 is not finding one of the Exception external jar.
The only way I have been successful in added the session EJB is also add the external jar. But the project fails when you load the page with javax.naming.NameNotFoundException: No object bound to the name java: xxxxxx I believe the EJB is failing at instantiation.
Has anyone had this problem and overcome it?
Thanks,
Francis

Finally I found solution.
Instead of deploying ejb jar to ear I've created a new ear deployment profile (so now I have ejb jar profile and ear profile).
It contains ejb jar + external jar library and custom manifest.mf with class-path to ext. jar.
Difference between this and previous version is the old one ear cointained ejb jar and the ejb jar contained ext. jar.
Now ear contains both ejb jar and ext. jar.
Rado

Error retriving session EJB with getEJBObject() from handle

the Code i use is
CREATE:
Handle handle = user.getHandle();
session.setAttribute("user",handle);
GET:
Handle handle = (Handle)session.getAttribute("user");
UserEJB user = (UserEJB)handle.getEJBObject();
// the abowe row gets the error.
Error:
java.lang.ClassCastException: org.omg.stub.javax.ejb._EJBObject_Stub
ive read several topics that say that this should work but it doesnt??
The bean is a Stateful Session EJB.
Ive tried to recompile both client and server serveral times, to prevent te stubs from beeing different. But no result.
Help please !!!!!!

try like this..
Create--
session.setAttribute("searchremote",tsremote.getHandle());
and get it like this....
Handle handle = (Handle)session.getAttribute("searchremote");
tsremote = (TradesSearchRemote)handle.getEJBObject();
               if (tsremote == null)
                    tsremote = getBeanReference();
                    session.setAttribute("searchremote",tsremote.getHandle());
I am doing like this and it is working fine....

Weblogic-ejb-jar.xml for a Session EJB

The weblogic-ejb-jar.xml generated for a Session EJB with local interfaces has a jndi-name element instead of local-jndi-name.
1. Create a Session EJB.
Select Include Local Interfaces.
2. In the META-INF directory select New>General>Deployment Descriptors>weblogic-ejb-jar.xml
The deployment descriptor generated has a jndi-name element.
For a Session EJB with local interfaces the element should be local-jndi-name.
thanks,
Deepak

weblogic-ejb-jar.xml jndi-name (instead of local-jndi-name) is with JDeveloper version 10.1.2 & 10.1.3

Servicegen for stateless session EJB

I've run into some minor trouble when I tried to generate
web services for some stateless session EJBs with the
servicegen Ant method. Note that expandMethods has been
set to True. It appears that the generated web-services.xml
file contains methods from the EJB's remote interface. When
deploying the web service WLS will use the locale interface.
If the remote interface has methods not found in the local
interface WLS will refuse to deploy the web service. No big
deal, since I could just add the missing methods to the
local interface. But still, I think this is somewhat odd
and inconsistent behavior. Is there anyway to get WLS to
deploy the web services against the remote interfaces, or
is this just a bad idea?
/Björn

Further information:
According to metalink bug 3224465, this was a bug fixed in release 9.0.2.3.99 of the App Server. However, I am using 9.0.3.1 and still have the problem....

Invalid username/password connecting to deployed session EJB (to OAS)

Hello,
OAS version : 9.0.4.0.0
JDeveloper version : 10.1.2.0.0 (Build 1811)
I have generated a very simple session EJB with the EJB
Diagram : business logic is only a method returning a
"hello world" String (no DB connection).
Next i have generated a "New Sample Java Client" to test
that, first connecting to the Embedded OC4J and it worked
very well.
Then i wanted to deploy this small example to my OAS
server, so i created a new session EJB deployment profile.
Deployment worked very well too.
To test this, i generated another "New Sample Java
Client", but that time i choosed "Connect to Remote App
Server", with adequate J2EE application and App Server
Connection names.
I took note of the new context lines. Login/password
strings were automatically filled with the ones i use to
connect to OEM Website (lets say the_login/the_password).
But unfortunately, when i launch the client, it doesn't
work. Here is the error stack :
C:\jdev1012\jdk\bin\javaw.exe -ojvm -classpath C:\dev\jdev\mywork\DarkWork\DarkProject\classes;C:\jdev1012\jdev\lib\jdev-rt.jar;C:\jdev1012\j2ee\home\lib\activation.jar;C:\jdev1012\j2ee\home\lib\ejb.jar;C:\jdev1012\j2ee\home\lib\jaas.jar;C:\jdev1012\j2ee\home\lib\jaxp.jar;C:\jdev1012\j2ee\home\lib\jcert.jar;C:\jdev1012\j2ee\home\lib\jdbc.jar;C:\jdev1012\j2ee\home\lib\jms.jar;C:\jdev1012\j2ee\home\lib\jndi.jar;C:\jdev1012\j2ee\home\lib\jnet.jar;C:\jdev1012\j2ee\home\lib\jsse.jar;C:\jdev1012\j2ee\home\lib\jta.jar;C:\jdev1012\j2ee\home\lib\mail.jar;C:\jdev1012\j2ee\home\lib\servlet.jar;C:\jdev1012\j2ee\home\oc4j.jar;C:\jdev1012\opmn\lib\optic.jar;C:\jdev1012\lib\xmlparserv2.jar;C:\jdev1012\lib\xmlcomp.jar mypackage1.SessionEJBClient
javax.naming.NamingException: Lookup error: javax.naming.AuthenticationException: Invalid username/password for DarkEJB (the_login); nested exception is:
     javax.naming.AuthenticationException: Invalid username/password for DarkEJB (the_login) [Root exception is javax.naming.AuthenticationException: Invalid username/password for DarkEJB (the_login)]
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:168)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at mypackage1.SessionEJBClient.main(SessionEJBClient.java:18)
Caused by: javax.naming.AuthenticationException: Invalid username/password for DarkEJB (the_login)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2523)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2339)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1781)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:663)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     ... 2 more
Process exited with exit code 0.
Do you know what i can do to solve this problem ?
I saw several posts on this forum about that problem,
mostly in 2003, so perhaps it has been solved now.
I tried the solutions and workarounds mentioned in those
post, but the error is still there...
Thank you for your help ! :-)

When you are connecting through a hotels WiFi like this they may occasionally require you to login via a home web page, this is quite normal. In many cases the password for this will be provided at checkin and with this being the case it would be worth speaking with the front desk to see if they can assist you with this.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Envorcing authentication with session ejb web service?

I implemented a web service as a session ejb. Some of the methods exposed by this web service require certain privileges. I modified my ejb-jar.xml file and declaratively specified this by using the <method-permission> element.
I have a Java client. If I pass credentials (e.g., name, password) into the constructor of the stub for the web service interface, the container properly recognizes this information, authenticates the user and either responds to or rejects the request based on if the user is permitted to call the method.
I have a non-Java client. If I try to do the same thing, it does not work. Peeking underneath the covers, I've discovered that the credentials are never being used.
Now I did get something to work. If I manually modify the web.xml for the web-services.war that is generated by servicegen to put a security constraint on the URL for the web service using the <security-constraint> element, when I run the non-Java client again, the credentials are used, properly recognized, etc.
(1) Does anyone know why the security constraint is necessary for the non-Java client but not the Java client?
(2) Am I doing something wrong? missing something? Is there a different way to do this?
(3) Since I implemented the web service as a session EJB but it appears the generated web-services.war content needs to be manually modified, is there a way to generate this security constraint? I've tried various things and cannot seem to do this.
Thanks for feedback!

Debu,
Yes, it successfully deployed.
Here are the messages from the failed run.
BUILD SUCCESSFUL
Total time: 33 seconds
D:\Oracle_ejb3.0\demo\howtoejb30ws>ant run
Buildfile: build.xml
common:
[echo] BuildName: ejb30ws
[echo] BuildHome: D:\Oracle_ejb3.0\demo\howtoejb30ws
[echo] BuildFile: D:\Oracle_ejb3.0\demo\howtoejb30ws\build.xml
[echo] BuildJVM: 1.5
oracle-env-check:
java-env-check:
init:
[echo] -----> Initializing project properties
setup:
[echo] -----> Creating the required sub-directories
cli-setup:
[echo] -----> Setting up the application client module
[oracle:genProxy] null, WSDLException: faultCode=INVALID_WSDL: The document: http://localhost:8888/ejb
/ejb30ws?wsdl is not a wsdl file or does not have a root element of "definitions" in the "http://schem
mlsoap.org/wsdl/" namespace or the "http://www.w3.org/2004/08/wsdl" namespace.
[oracle:genProxy] WSDLException: faultCode=INVALID_WSDL: The document: http://localhost:8888/ejb30ws/e
ws?wsdl is not a wsdl file or does not have a root element of "definitions" in the "http://schemas.xml
.org/wsdl/" namespace or the "http://www.w3.org/2004/08/wsdl" namespace.
BUILD FAILED
D:\Oracle_ejb3.0\demo\howtoejb30ws\build.xml:316: oracle.j2ee.ws.common.tools.api.WsdlValidationExcept
null, WSDLException: faultCode=INVALID_WSDL: The document: http://localhost:8888/ejb30ws/ejb30ws?wsdl
not a wsdl file or does not have a root element of "definitions" in the "http://schemas.xmlsoap.org/ws
namespace or the "http://www.w3.org/2004/08/wsdl" namespace.
Total time: 3 seconds
D:\Oracle_ejb3.0\demo\howtoejb30ws>

Update passed in XML doc with pl/sql xmldom

Hi,
I have an xml document that is passed in through a stored procedure as CLOB. I'm trying to use the XMLParser and XMLDOM to add an additional node
The XML looks something like the following
<rowset>
<row>
<firstname>john</firstname>
</row>
<row>
<firstname>jane</firstname>
</row>
</rowset>
I need to loop through each of <mynames> nodes and then add another node <lastame> so it looks like the following
<rowset>
<row>
<firstname>john</firstname>
<lastame>smith</lastame>
</row>
<row>
<firstname>jane</firstname>
<lastame>smith</lastame>
</row>
</rowset>
I have the following code
parseClob XMLPARSER.Parser;
newNames XMLDOM.DOMDocument;
tempNode XMLDOM.DOMNode;
mye xmldom.domelement;
     item_text xmldom.DOMText;
numofrows number;
     nodeList xmldom.DOMNodeList;
     newnode xmldom.domnode;
parseClob := xmlparser.newParser;
XMLPARSER.parseClob(parseClob,names);
newNames := XMLPARSER.getDocument(parseClob);
XMLPARSER.freeParser(parseClob);
nodeList := xslprocessor.selectNodes(xmldom.makeNode(newNames), '//rowset/row');
numOfRows := xmldom.getlength(nodeList)-1;
for i in 0..numOfRows LOOP
newnode := xmldom.item(nodeList, i);
          --create the new node
mye := xmldom.createElement(newName, 'lastname');
--add it to the new node
tempNode := xmldom.appendChild(newnode, xmldom.makeNode(mye));
--update the text in the lastname
item_text := xmldom.createTextNode(newNames, 'smith');
tempNode := xmldom.appendChild(tempNode, xmldom.makeNode(item_text));
end loop;
what happens is that when i write out the newnode xml out to a buffer i see the <lastname> tag
but when i write out the newNames xml out to a buffer after the loop is finished the <lastname> tag is
missing. like it didn't update the newNames xml
I've seen lots of example on how to create an XML document with the DOM from scratch but nothing about updating
an passed in xml document. any help would be appreciated

Updatexml is reference in Oracle 9i, I'm sorry i should have mentioned that I am using oracle 8i. Is there something you can use in oracle 8i?

Complex xml with multiple namespaces giving LPX-00601: Invalid token error

Hi
Apologies if this is a really simple question.
I have not worked with xml before and I'm drowning in different ways to do the extract.
I have a very complex xml, sample below, which I'm trying to do one siple extract to get myself going.
I have the data in a table in an xmltype column,
I am trying to extract containernumber first and get the error.
select xml_column, extract(xml_column,'/env:Envelope/env:Body/ns0:QueryCntrNumberResponse/ns0:QueryResContainerDetail/ns1:ContainerNumber/ns2:ContainerNumber')
from test_xml;
Not sure if I should use the namespaces and have tried without but results are always NULL
I would really appreciate any pointers around these ultiple namespaces.
Thanks
Nicki
XML Sample
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
              xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xmlns:ns0="http://com.cargosmart.cargotracking.webservice.cntr.dto"
              xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto"
              xmlns:ns2="http://com.cargosmart.cargotracking.webservice.basic.dto"
              xmlns:ns3="http://com.cargosmart.cargotracking.webservice.bl.dto"
              xmlns:ns4="http://com.cargosmart.cargotracking.webservice.bkg.dto">
<env:Body>
    <ns0:QueryByCntrNumberResponse>
      <ns0:QueryRes ult="">
        <ns0:QueryCriteria>
          <ns1:CarrierSCACCode>APLU</ns1:CarrierSCACCode>
          <ns1:ContainerNumber>APZU344693-1</ns1:ContainerNumber>
        </ns0:QueryCriteria>
        <ns0:ContainerDetail>
          <ns1:ContainerNumber>
            <ns2:ContainerNumber>APZU344693</ns2:ContainerNumber>
            <ns2:ContainerCheckDigit>1</ns2:ContainerCheckDigit>
            <ns2:GrossWeight>
              <ns2:Weight>20260.8</ns2:Weight>
              <ns2:WeightUnit>KGS</ns2:WeightUnit>
            </ns2:GrossWeight>
          </ns1:ContainerNumber>
NOT THE FULL COLUMN

Could I just ask you one more question.
I had already expanded the query to include the repeating sections using xmlsequence.
Has that been replaced too?
            select extractvalue(xml_column,'/env:Envelope/env:Body/ns0:QueryByCntrNumberResponse/ns0:QueryResult/ns0:ContainerDetail/ns1:ContainerNumber/ns2:ContainerNumber',
              'xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
              xmlns:ns0="http://com.cargosmart.cargotracking.webservice.cntr.dto"
              xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto"
              xmlns:ns2="http://com.cargosmart.cargotracking.webservice.basic.dto"
              xmlns:ns3="http://com.cargosmart.cargotracking.webservice.bl.dto"
              xmlns:ns4="http://com.cargosmart.cargotracking.webservice.bkg.dto"') col1,
              extractvalue(value(t2),'/ns1:Event/ns1:EventDescription', 'xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto"') Event_Description,
              extractvalue(value(t2),'/ns1:Event/ns1:EventDT/ns2:LocDT', 'xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto" xmlns:ns2="http://com.cargosmart.cargotracking.webservice.basic.dto"') Event_DT,
              extractvalue(value(t2),'/ns1:Event/ns1:Location/ns2:LocationName', 'xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto" xmlns:ns2="http://com.cargosmart.cargotracking.webservice.basic.dto"') location
from test_xml t1,
table(xmlsequence(extract(t1.xml_column,'/env:Envelope/env:Body/ns0:QueryByCntrNumberResponse/ns0:QueryResult/ns0:ContainerDetail/ns1:Event','xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
              xmlns:ns0="http://com.cargosmart.cargotracking.webservice.cntr.dto"
              xmlns:ns1="http://com.cargosmart.cargotracking.webservice.common.dto"
              xmlns:ns2="http://com.cargosmart.cargotracking.webservice.basic.dto"
              xmlns:ns3="http://com.cargosmart.cargotracking.webservice.bl.dto"
              xmlns:ns4="http://com.cargosmart.cargotracking.webservice.bkg.dto"'))) t2;

Little help with complex XML data as data provider for chart and adg

Hi all,
I've been trying to think through a problem and Im hoping for
a little help. Here's the scenario:
I have complex nested XML data that is wrapped by subsequent
groupings for efficiency, but I need to determine if each inner
item belongs in the data collection for view in a data grid and
charts.
I've posted an example at the bottom.
So the goal here is to first be able to select a single
inspector and then chart out their reports. I can get the data to
filter from the XMLListCollection using a filter on the first layer
(ie the name of the inspector) but then can't get a filter to go
deeper into the structure in order to determine if the individual
item should be contained inside the collection. In other words, I
want to filter by inspector, then time and then tag name in order
to be able to use this data as the basis for individual series
inside my advanced data grid and column chart.
I've made it work with creating a new collection and then
looping through each time there is a change to the original
collection and updating the new collection, but that just feels so
bloated and inefficient. The user is going to have some buttons to
allow them to change their view. I'm wondering if there is a
cleaner way to approach this? I even tried chaining filter
functions together, but that didn't work cause the collection is
reset whenever the .refresh() is called.
If anyone has experience in efficiently dealing with complex
XML for charting purposes and tabular display purposes, I would
greatly appreciate your assistance. I know I can get this to work
with a bunch of overhead, but I'm seeking something elegant.
Thank you.

Hi,
Please use the code similar to below:
SELECT * FROM DO_NOT_LOAD INTO TABLE IT_DO_NOT_LOAD.
SORT IT_DO_NOT_LOAD by WBS_Key.
    IF SOURCE_PACKAGE IS NOT INITIAL.
      IT_SOURCE_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT IT_SOURCE_PACKAGE INTO WA_SOURCE_PACKAGE.
        V_SYTABIX = SY-TABIX.
        READ TABLE IT_DO_NOT_LOAD into WA_DO_NOT_LOAD
        WITH KEY WBS_Key = WA_SOURCE_PACKAGE-WBS_Key
        BINARY SEARCH.
        IF SY-SUBRC = 0.
          IF ( WA_DO_NOT_LOAD-WBS_EXT = 'A' or WA_DO_NOT_LOAD-WBS_EXT = 'B' )
          DELETE IT_SOURCE_PACKAGE INDEX V_SYTABIX.
        ENDIF.
ENDIF.
      ENDLOOP.
      SOURCE_PACKAGE[] = IT_SOURCE_PACKAGE[].
    ENDIF.
-Vikram

Creating a simple java client for a session EJB local interface

Hi all
Is it possible to create a simple java client for a session ejb local interface with JDeveloper.
The problem is that it creates a test client for a remote interface only...
i.e.
MySessionEJB sessionEJB = context.lookup("MySessionEJB")
and once i try to adjust it manually for the local interface...
MySessionEJBLocal sessionEJB = (MySessionEJBLocal) context.lookup("MySessionEJBLocal") (MySessionEJBLocal - is the name of my local interface)
it generates the exception:
javax.naming.NotFoundException: SessionEJBLocal not found
at...........................(RMIClientContext.java:52)
There is still no problem with accessing the local interface object from the jsf project where i've added <ejb-local-ref> tag into the web.xml file.
but i need the possibility of testing the simple java client for the local interface to test business methods wich should return objects without indirect properties
Thanks in advance.
Alex.

Pedja thanks for reply.
I still dont understand what is wrong with my example.
The first peace of the code i wrote (getting the reference to the remote interface object) works pretty well, and even more it is produced automatically by JDeveloper, so why we cant get a reference to the local interface object the same way?
Certanly we should use the local interface for getting access to the resource functioning under the same local jvm and i think it doesnt metter wich app server we really use wls or oas or others
Thanks. Alex.

Deploy multiple instances of the same stateless session EJB

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same stateless session bean, but specify a different JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single invocation, just that I need to hit different databases (all with the same schema), and Id like to be able to lookup the EJB via a different JNDI name, and have the exact same functionality, just against different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure whether or not this is a JBoss "issue" or a limitation of the EJB Spec (or me being just plain wrong and trying to do something the "wrong way")
Nick

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same
stateless session bean, but specify a different
JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single
invocation, just that I need to hit different
databases (all with the same schema), and Id like to
be able to lookup the EJB via a different JNDI name,
and have the exact same functionality, just against
different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort
of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure
whether or not this is a JBoss "issue" or a limitation
of the EJB Spec (or me being just plain wrong and
trying to do something the "wrong way")
NickI haven't done it but judging from the deployment descriptors yes.
For example if I have two bounded datasources java:/Database1 and java:/Database2
Lets say I have a session bean called MySession, then in your ejb-jar.xml you would have (notice that the desc, display, and ejb-name are the only differences)
<session>
<description>MySessionAlpha</description>
<display-name>MySessionAlpha</display-name>
<ejb-name>MySessionAlpha</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
<session>
<description>MySessionBeta</description>
<display-name>MySessionBeta</display-name>
<ejb-name>MySessionBeta</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
But now in the jboss.xml, we will have the following elements. What you may notice is that are bound to different remote and local jndi names. But the resource bindings are very different. The res-ref-name stays the same, but the jndi-name are different. I think this will work for you.
<session>
<ejb-name>MySessionAlpha</ejb-name> <jndi-name>ejb/com/mycorp/MySessionAlphaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionAlphaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database1</jndi-name>
</resource-ref>
</session>
<session>
<ejb-name>MySessionBeta</ejb-name> <jndi-name>ejb/com/mycorp/MySessionBetaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionBetaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database2</jndi-name>
</resource-ref>
</session>

Using EJB with Hibernate on Weblogic Server ADF platform

Hi all,
We use Jdeveloper 11.1.1.4 and WLS 10.3
I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic
I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating update* ddl on schema, they can just only re-create the tables -not real update.
Firstly i got the related jars from internet: http://www.2hotfile.com/di-LSBU.png
cglib-2.2
antlr-2.7.6
commons-collections-3.1
dom4j-1.6.1
hibernate3
hibernate-validator-4.1.0.Final
javassist-3.9.0.GA
jta-1.1
slf4j-api-1.5.11
slf4j-nop-1.5.11
Then i added to model project as library dependencies: http://www.2hotfile.com/di-GMSZ.png
configured persistence.xml as below:
<?xml version="1.0" encoding="windows-1252" ?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd"
version="1.0">
<persistence-unit name="VakkoEJBModel" transaction-type="RESOURCE_LOCAL">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>jdbc/VakkoDS</jta-data-source>
<properties>
<property name="hibernate.jndi.url" value="t3://127.0.0.1:7001" />
<property name="hibernate.connection.datasource" value="jdbc/VakkoDS" />
<property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup" />
<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect" />
<property name="hibernate.hbm2ddl.auto" value="update" />
<property name="hibernate.current_session_context_class" value="jta" />
</properties>
</persistence-unit>
</persistence>
weblogic-application.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<weblogic-application>
<prefer-application-packages>
<package-name>antlr.*</package-name>
<package-name>org.hibernate.*</package-name>


</prefer-application-packages>
</weblogic-application>
weblogic-ejb-jar.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<weblogic-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-ejb-jar http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd"
xmlns="http://www.bea.com/ns/weblogic/weblogic-ejb-jar">
</weblogic-ejb-jar>
ejb-jar.xml
<?xml version="1.0" encoding="windows-1252" ?>
<ejb-jar/>
And i added to setDomainEnv.cmd that line:
set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
deployment profile could be seen by clicking those links:
http://www.2hotfile.com/di-XV68.png
http://www.2hotfile.com/di-8YC9.png
http://www.2hotfile.com/di-ADR4.png
And i tried to manipulate the ear file contents according to these informations: http://middlewaremagic.com/weblogic/wp-content/uploads/2010/06/EAR_Application_Diagram.jpg
under ear\META-INF\application.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd" version="5" xmlns="http://java.sun.com/xml/ns/javaee">
<display-name>ejb1</display-name>
<module>
<ejb>ejb1.jar</ejb>
</module>
</application>
under ear\META-INF\weblogic-application.xml
<?xml version = '1.0' encoding = 'windows-1254'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
<prefer-application-packages>
<package-name>org.hibernate.*</package-name>
<package-name>antlr.*</package-name>


</prefer-application-packages>
<listener>
<listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
<listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
</weblogic-application>
The files which existed in ejb1.ear\ejb1.jar\META-INF\ directory same with source folder of model project (these were created by jdeveloper deployment process according to deployment profile which previously explaint)
ear contents shown that link : http://www.2hotfile.com/di-23X6.png
When i deploy the project to weblogic by using JDeveloper or http://127.0.0.1:7101/console/ method. But occured exception
<10-Dec-2012 16:31:54 o'clock EET> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppDeploymentsControlPage.>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1355149965087' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
     at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
     at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
     Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ejb1'.>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
     at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
     at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
     Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
     at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
     at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
     at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
     at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:349)
     at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:263)
     at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:69)
     at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:223)
     at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:324)
     at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:393)
What are my mistake/s or incompletes?
Please help me and excuse my poor English. Thanks in advance

Thanks again for your consideration.
I double checked CLASSPATH. And seen starting wls with classpath which i defined, but no change about ecxeption.
you can see wls starting classpath through the link: http://www.2hotfile.com/image.php?di=BQNE
setDomainEnv.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
@REM *************************************************************************
@REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
@REM
@REM This script initializes the following variables before calling commEnv to set other variables:
@REM
@REM WL_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
@REM this script to switch between Sun or BEA or just have the default be set.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DOMAIN_PRODUCTION_MODE
@REM - The variable that determines whether the workshop related settings like the debugger,
@REM testconsole or iterativedev should be enabled. ONLY settable using the
@REM command-line parameter named production
@REM NOTE: Specifying the production command-line param will force
@REM the server to start in production mode.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
set COMMON_COMPONENTS_HOME=C:\Oracle\Middleware_11.1.1.4\oracle_common
for %%i in ("%COMMON_COMPONENTS_HOME%") do set COMMON_COMPONENTS_HOME=%%~fsi
@REM C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
set CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;%CLASSPATH%;
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set PORTLET_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WL_HOME=C:\Oracle\Middleware_11.1.1.4\wlserver_10.3
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=
set SUN_JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
if "%JAVA_VENDOR%"=="Oracle" (
     set JAVA_HOME=%BEA_JAVA_HOME%
) else (
     if "%JAVA_VENDOR%"=="Sun" (
          set JAVA_HOME=%SUN_JAVA_HOME%
     ) else (
          set JAVA_VENDOR=Sun
          set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
          @REM set JAVA_HOME=C:\Oracle\Middleware_11.1.1.4\jdk160_21
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
if "%DEBUG_PORT%"=="" (
     set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
     set SERVER_NAME=DefaultServer
set DERBY_FLAG=false
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
     :SET_PARAM
     for %%q in (%1) do set noQuotesParam=%%~q
     if /i "%noQuotesParam%" == "nodebug" (
          set debugFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "production" (
          set DOMAIN_PRODUCTION_MODE=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "notestconsole" (
          set testConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noiterativedev" (
          set iterativeDevFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
          set logErrorsToConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noderby" (
          set DERBY_FLAG=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "doExit" (
          set doExitFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "noExit" (
          set doExitFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "verbose" (
          set verboseLoggingFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "enableHotswap" (
          set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
          GOTO :EOF
     ) else (
          set PROXY_SETTINGS=%PROXY_SETTINGS% %1
     GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
     set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
     set debugFlag=false
     set testConsoleFlag=false
     set iterativeDevFlag=false
     set logErrorsToConsoleFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
set XMS_SUN_64BIT=256
set XMS_SUN_32BIT=256
set XMX_SUN_64BIT=512
set XMX_SUN_32BIT=512
set XMS_JROCKIT_64BIT=256
set XMS_JROCKIT_32BIT=256
set XMX_JROCKIT_64BIT=512
set XMX_JROCKIT_32BIT=512
if "%JAVA_VENDOR%"=="Sun" (
     set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
     set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
     echo this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
) else (
     set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
     set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
     echo this is noooooooooooooooooooooooooooooooooooooooooooooooot sun
if "%JAVA_VENDOR%"=="Oracle" (
     set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_JROCKIT_64BIT%m -Xmx%XMX_JROCKIT_64BIT%m
     set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_JROCKIT_32BIT%m -Xmx%XMX_JROCKIT_32BIT%m
) else (
     set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_SUN_64BIT%m -Xmx%XMX_SUN_64BIT%m
     set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_SUN_32BIT%m -Xmx%XMX_SUN_32BIT%m
set MEM_ARGS_64BIT=%CUSTOM_MEM_ARGS_64BIT%
set MEM_ARGS_32BIT=%CUSTOM_MEM_ARGS_32BIT%
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_ARGS=%MEM_ARGS_64BIT%
) else (
     set MEM_ARGS=%MEM_ARGS_32BIT%
set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
) else (
     set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=512m
set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=512m
if "%JAVA_USE_64BIT%"=="true" (
     set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
) else (
     set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
if "%JAVA_VENDOR%"=="Sun" (
     if "%PRODUCTION_MODE%"=="" (
          set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
     set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
     set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="Apple" (
     set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
set USER_MEM_ARGS=-Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
if NOT "%USER_MEM_ARGS%"=="" (
     set MEM_ARGS=%USER_MEM_ARGS%
set ORACLE_DOMAIN_CONFIG_DIR=%DOMAIN_HOME%\config\fmwconfig
for %%i in ("%ORACLE_DOMAIN_CONFIG_DIR%") do set ORACLE_DOMAIN_CONFIG_DIR=%%~fsi
set WLS_JDBC_REMOTE_ENABLED=-Dweblogic.jdbc.remoteEnabled=false
if "%WC_OHOME_ARGUMENT%"=="" (
     set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
     set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%PORTLET_OHOME_ARGUMENT%"=="" (
     set PORTLET_OHOME_ARGUMENT=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME%
     set EXTRA_JAVA_PROPERTIES=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%WC_OHOME_ARGUMENT%"=="" (
     set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
     set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
set ALT_TYPES_DIR=%COMMON_COMPONENTS_HOME%\modules\oracle.ossoiap_11.1.1,%COMMON_COMPONENTS_HOME%\modules\oracle.oamprovider_11.1.1
set PROTOCOL_HANDLERS=oracle.mds.net.protocol
if "%JAVA_VENDOR%"=="Sun" (
     set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
) else (
     if "%JAVA_VENDOR%"=="Oracle" (
          set EXTRA_JAVA_PROPERTIES=-Djrockit.codegen.newlockmatching=true %EXTRA_JAVA_PROPERTIES%
     ) else (
          set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS:;="|"%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.tagging.scopeTags=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.analytics.disable-native-partitioning=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dwsm.repository.path=%DOMAIN_HOME%\oracle\store\gmds %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dcommon.components.home=%COMMON_COMPONENTS_HOME% -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=%DOMAIN_HOME% -Djrockit.optfile=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=%ORACLE_DOMAIN_CONFIG_DIR%\servers\%SERVER_NAME% -Doracle.domain.config.dir=%ORACLE_DOMAIN_CONFIG_DIR% -Digf.arisidbeans.carmlloc=%ORACLE_DOMAIN_CONFIG_DIR%\carml -Digf.arisidstack.home=%ORACLE_DOMAIN_CONFIG_DIR%\arisidprovider -Doracle.security.jps.config=%DOMAIN_HOME%\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=%DOMAIN_HOME%\servers\%SERVER_NAME%\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=%ALT_TYPES_DIR% -Djava.protocol.handler.pkgs=%PROTOCOL_HANDLERS% %WLS_JDBC_REMOTE_ENABLED% %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Djps.app.credential.overwrite.allowed=true %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
     @REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
     set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
     set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
     echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
     echo Please edit your environment and set the JAVA_HOME
     echo variable to point to the root directory of your Java installation.
     popd
     pause
     GOTO :EOF
if "%DERBY_FLAG%"=="true" (
     set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
) else (
     set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
     set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar;%POST_CLASSPATH%
) else (
     set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar
if NOT "%PRE_CLASSPATH%"=="" (
     set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;%PRE_CLASSPATH%
) else (
     set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
if "%PORTLET_ORACLE_HOME%"=="" (
     set POST_CLASSPATH=%WC_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
     set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar;%POST_CLASSPATH%
) else (
     set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar
set POST_CLASSPATH=%PORTLET_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
set POST_CLASSPATH=%DOMAIN_HOME%\wcps-lib\derby-10.6.1.0.jar;%DOMAIN_HOME%\wcps-lib\derbytools-10.6.1.0.jar;%POST_CLASSPATH%
if NOT "%DATABASE_CLASSPATH%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
     ) else (
          set POST_CLASSPATH=%DATABASE_CLASSPATH%
if NOT "%ARDIR%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
     ) else (
          set POST_CLASSPATH=%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
if "%PRODUCTION_MODE%"=="true" (
     set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
     echo Logging WLS stdout to %WLS_STDOUT_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
     echo Logging WLS stderr to %WLS_STDERR_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
@REM set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
if NOT "%EXT_PRE_CLASSPATH%"=="" (
     if NOT "%PRE_CLASSPATH%"=="" (
          set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
     ) else (
          set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
     if NOT "%POST_CLASSPATH%"=="" (
          set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
     ) else (
          set POST_CLASSPATH=%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
if NOT "%WLP_POST_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%WLP_POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%POST_CLASSPATH%
if NOT "%WEBLOGIC_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
     ) else (
          set CLASSPATH=%WEBLOGIC_CLASSPATH%
if NOT "%PRE_CLASSPATH%"=="" (
     set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
if NOT "%JAVA_VENDOR%"=="BEA" (
     set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
) else (
     set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
startWebLogic.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
SETLOCAL
@REM --- Start Functions ---
@REM set JAVA_OPTIONS=-javaagent:C:\jarlar\jrebel\jrebel.jar %JAVA_OPTIONS%
@REM set CLASS_CACHE=false
GOTO :ENDFUNCTIONS
:stopAll
     @REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
     if NOT "X%ALREADY_STOPPED%"=="X" (
          GOTO :EOF
     @REM STOP DERBY (only if we started it)
     if "%DERBY_FLAG%"=="true" (
          echo Stopping Derby server...
          call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
          echo Derby server stopped.
     set ALREADY_STOPPED=true
GOTO :EOF
:classCaching
     echo Class caching enabled...
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
     set SERVER_CLASS=com.oracle.classloader.launch.Launcher
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start WebLogic Server for this domain.
@REM
@REM To create your own start script for your domain, you can initialize the
@REM environment by calling @USERDOMAINHOME\setDomainEnv.
@REM
@REM setDomainEnv initializes or calls commEnv to initialize the following variables:
@REM
@REM BEA_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server.
@REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
@REM PATH - JDK and WebLogic directories are added to system path.
@REM WEBLOGIC_CLASSPATH
@REM - Classpath needed to start WebLogic Server.
@REM PATCH_CLASSPATH - Classpath used for patches
@REM PATCH_LIBPATH - Library path used for patches
@REM PATCH_PATH - Path used for patches
@REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
@REM JAVA_VM - The java arg specifying the VM to run. (i.e.
@REM - server, -hotspot, etc.)
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DERBY_HOME - Derby home directory.
@REM DERBY_CLASSPATH
@REM - Classpath needed to start Derby.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM CLASS_CACHE - Enable class caching of system classpath.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
@REM Call setDomainEnv here.
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
@REM Start Derby
set DERBY_DEBUG_LEVEL=0
if "%DERBY_FLAG%"=="true" (
     call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
set SAVE_JAVA_OPTIONS=
set CLASSPATH=%SAVE_CLASSPATH%
set SAVE_CLASSPATH=
if "%PRODUCTION_MODE%"=="true" (
     set WLS_DISPLAY_MODE=Production
) else (
     set WLS_DISPLAY_MODE=Development
if NOT "%WLS_USER%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
if NOT "%WLS_PW%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
     if NOT "%CLASSPATH%"=="" (
          set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
     ) else (
          set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
echo .
echo .
echo JAVA Memory arguments: %MEM_ARGS%
echo .
echo WLS Start Mode=%WLS_DISPLAY_MODE%
echo .
echo CLASSPATH=%CLASSPATH%
echo .
echo PATH=%PATH%
echo .
echo ***************************************************
echo * To start WebLogic Server, use a username and *
echo * password assigned to an admin-level user. For *
echo * server administration, use the WebLogic Server *
echo * console at http:\\hostname:port\console *
echo ***************************************************
@REM CLASS CACHING
if "%CLASS_CACHE%"=="true" (
     CALL :classCaching
@REM START WEBLOGIC
echo starting weblogic with Java version:
%JAVA_HOME%\bin\java %JAVA_VM% -version
if "%WLS_REDIRECT_LOG%"=="" (
     echo Starting WLS with line:
     echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
     %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
     echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
     %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
CALL :stopAll
popd
@REM Exit this script only if we have been told to exit.
if "%doExitFlag%"=="true" (
     exit
ENDLOCAL
Edited by: webyildirim on 11.Ara.2012 02:38

Passing complex XML to session EJB with automatic WSIF mapping

Similar Messages

Maybe you are looking for