Passing data from Javascripts to Applets

Hi,
I've wrote a small applet for lists but when I try to pass data from my
JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options, though I've checked my settings . I've included the listing of the code snippet where the error occurs.
document.listApplet.testMethod()OR when I use:
document.applet(listApplet).testMethod()The applet is loaded by this statement:
<OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but the error persists when attempting to call public method in my applet. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
Devyn

Hi,
Thnx for the reply. I've tried as you suggested and modified my <OBJECT> line to:
<OBJECT CODE="CustomAppletList.class" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600">
<PARAM NAME="scriptable" VALUE="true"></PARAM>
</OBJECT>But the error persists. I'm using IE6. I did not have such errors with IE5.
I use the following code to test the applet tag I assigned at each step:
                    if (document.listApplet) {
                         document.write ("Applet Object (document.listApplet) exists.")
                    } else {
                         return
                    if (document.listApplet.object) {
                         document.write ("Applet Object (document.listApplet.object) exists.")
                    } else {
                         return
                    if (document.listApplet.object.testMethod) {
                         document.write ("Method textMethod() in applet has been validated and exists!")
                    } else {
                         document.write ("[2]")
                         return
               document.write ("[11]")The debugging info from this code at the end of the html document I'm writing is:
[1]Applet Object (document.viewer) exists.Applet Object (document.viewer.object) exists.[2][11]
Devyn

Similar Messages

  • Passing data from JavaScript to Applets (Error when trying to pass data)

    Hi,
    I've wrote a small applet for lists but when I try to pass data from my
    JavaScript to my applet, I get an "Error: Object doesn't support this property or method". I get this error with a select other sites including the page I'm writing, leading me to believe I may not have installed requried files or set required options. I've included the listing of the code snippet where the error occurs.
    document.listApplet.testMethod()OR when I use:
    document.applet(listApplet).testMethod()The applet is loaded by this statement:
    <OBJECT CODE="CustomAppletList" NAME="listApplet" ID="listApplet" WIDTH="1000" HEIGHT="600"></OBJECT>and loads fine but no data is passed through it's public methods. Can anyone suggest ideas how I can successfully pass data from my JavaScripts to my applets?
    Devyn

    this should work for you. In your javascript do this.
    var myApplet=document.listApplet;
    myApplet.testMethod()
    If you need more help let me know.
    Paul

  • Passing data from JAVASCRIPT to SAP database

    Hi Experts,
    Is it possible to connect or access RFC function module through JAVASCRIPT? I want to send data from JAVASCRIPT to SAP database table.
    Is it possible to pass data from JAVASCRIPT to SAP database table?
    Thanks in advance.
    Regards,
    Arindam Samanta.

    OData services can be one option to achieve this.
    Another possibility can be use of Generic REST enablement with SAP NetWeaver Gateway.
    If you are not considering Gateway at all, then  A JSON adapter like the one mentioned in JSON Adapter for ABAP Function Modules can be handy.

  • How to pass parameter from javascript to applet ?

    i have some parameters from form in html,
    and i would like to pass from javascript to an applet,
    (which a type of calling method in applet from javascript)
    and get back data from applet to display in html
    how could i do this ?

    in my program,
    i pass 3 string to the applet
    var reply = document.test.called(ft, fc, tc)
    in the fucntion "called" in the "test" applet
    i simply test it by
    public String called(String l, String from, String to){
    return "abcd";
    but the result should the value return is "1"
    can anyone help me ?

  • Transport data from Javascript file to BSP application

    Hi,
            How can we transport data from Javascript file that is stored in MIME repository to the BSP application that uses this Javascript?
    To elaborate :
    I  have a  BSP application which calls few functions from a Javascript file that is stored in the MIME repository. Now, i need to pass one of the values that is obtained dynamically in the Javascript function to the BSP application inorder to store it in DB.. How can I do this?
    Thanks,
    Vasuki

    Hi,
    you must only identify in which variable the javascript function stores the values. So you can enrich
    your bsp application with such a function. Then you must transfer the value to a hidden input field.
    This field content can be requested via  request->get_form_field( 'name_of_the_field' ).
    On the other side, check out, if ther is a getter function in this library.
    Use firwefox with firbug plugin an set breakpoint in the javascript function to get an overview about the dom modcel.
    Best regards, Stefan

  • Passing data from JSP to existing iView in Portal

    Hello Experts,
    I'm new to EP and Web DynPro. Please provide your guidance for the following scenario:
    There are 2 iViews in different pages.
    iView 1(Web DynPro Java application) - its running in portal
    - created by other person long time back - it takes input from user to create a support message
    iView 2(JSP page)
    - since iView 1 is very generic, I have to create one more iView, which is simple & specific to user request, but should pass the data to the iView 1, which in turn will create a support message.
    My Question:
    Is it possible to pass data from my JSP page(in iView2) to the running application in iView1?
    (I don't have access to the code of the running application- so i can't use Client Data Bag or sessions)
    If the above condition is possible, then is it possible to hide the iView 1, so that user doesn't need to see the iView 1 when they submit data?
    Please guide me with sample code or links.
    Thanks in advance,
    Aruna Thamilmani

    You could have the Applet make a request to the server (via URLConnection).

  • Pass data from servlet to jsp using sendRedirect

    Hi,
    I am passing data from servlet to jsp using forward method of request dispatcher but as it doesn't change the url it is creating problems. When ever user refreshes the screen(browser refresh) it's re-loading both servlet and jsp, which i don't want to happen. I want only the jsp to be reloaded.
    Can I pass data from servlet to jsp using sendRedirect in this case. I also want to pass some values from servlet to jsp but without using query string. I want to set some attributes and send to jsp just like we do for forward method of request dispatcher.
    Is there any way i can send data using attributes(without using query string) using sendRedirect? Please let me know

    sendRedirect is meant as a true redirect. meaning
    you can use it to redirect to urls not in your
    context....with forward you couldn't pass information
    to jsps/servlets outside your own context.Actually, you can:
    getServletContext().getContext("/other").getRequestDispatcher("/path/to/servlet").forward(request, response)I think the issue here is that the OP would like to have RequestDispatcher.forward() also update the address in the client's browser. That's not possible, AFAIK. By the time the request is forwarded, the browser has already determined the URL of the servlet, and the only I know of way to have the browser change the URL to the forwarded Servlet/JSP is to send a Location: header (i.e. sendRedirect()). Remember that server-side dispatching is transparent to the client. Maybe there's some tricky stuff you can do with JavaScript to change the address in the address bar without reloading the page?
    Brian

  • Problem in passing data from one .jsp page to another .jsp page

    i have a problem here
    Actually i have 2 jsp pages. What im trying to do here is actually i want to pass data from the first jsp page to the second for updating
    The first jsp page contains data that user wants to update in the form of table.
    <td><img src = "edit.gif" alt = "edit" border="0" ><td>
    <TD><%= Name %></td>
    <TD><%= rs.getInt("Age") %></td>
    <TD><%= rs.getString("Gender") %></td>
    So this page displays the data that users wants to update plus one image button (edit button). So when user clicks this button, all the data in this page will be brought to the second .jsp page called updatePersonal for updating.
    The problem here is that it is not displaying the existing data in the second .jsp page.
    The second page basically contains forms
    <INPUT TYPE="text" NAME="FirstName" maxlength="30" value = "<%=FirstName%>">
    Can someone please help me. I really dont know what to do..How do i get the data displayed in the text field that is passed from the first .jsp page..thankx in advance

    Please modify below code to:
    td><img src = "edit.gif" alt = "edit" border="0" ><td>
    -----------------modified code
    td><a href="updatePersonal.jsp?FirstName=<%=rs.getString(FirstName")%">&LastName=<%=rs.getString("LastName")%>&Age=<%=rs.getInt("Age")%>&Gender=<%=rs.getString("Gender")%>"><img src = "edit.gif" alt = "edit" border="0" ></a><td>
    I'm sure it works</a>

  • Passing value from javascript function to servlet

    Hello everybody,
    i need to pass parameter from javascript function to servlet.
    what i wrote is :
    function callPopulateServlet(t)
    var h =document.NewRequest.services;
    var y = t.selectedIndex;
    alert(h.options[y].value);
    var id=h.options[y].value;
    <%session.setAttribute("id",id);%> // am getting error at this point
    document.NewRequest.submit();
    with this id am quering values from database through servlet.
    any body knows plz help me.
    thanks,
    anil.

    this is the error am getting
    Stacktrace:
         org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:85)
         org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
         org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:299)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

  • How can I pass data from a form guide to another form in a business process

    How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

    Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide.  This could be either version ES1, ES2/2.5 or ES3/ADEP
    If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES. 
    You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

  • I need to pass data from an Access database to Teststand by using the built in Data step types(open data

    base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
    When I tried the same thing on another cmputer the same thing
    happend
    appreiciate u"r help

    base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
    Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
    Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
    "SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
    Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
    and you are running. Has anything else changed aside from the file you are editing?
    Regards,
    -Elaine R.
    National Instruments
    http://www.ni.com/ask

  • Passing data from a panel to a frame / disposing of a frame from in a panel

    Hello, I have recently created a program where all windows are made of seperate frames, now, to make the whole thing a bit more appealing and professional looking, i'd like to make 1 main frame, and load my content panels into this 1 frame. Problem i'm having with this is passing data from the loaded in panel to the main frame, so the main frame can hide one panel to load another with data inserted in the first panel. OR another solution to my problem would be a way to dispose of a frame, but from within the seperate panel class. I have searched the www for a solution, but haven't found one so far, so, any suggestions or references to some info about this kind of issue? Any pointer is greatly appreciated

    kennethdm wrote:
    EDIT: I took a look at the cardlayout, and, although i see its relevance to my question, it still leaves me with the question how exactly i will pass data the user inputs into the first panel, to the second panel. The second panel is built by the info which is provided in the first panel.Stop thinking of them as Panels and start thinking of them as OOP objects that have data that must be shared. It's often a matter of using getters and setters and sometimes requiring a sprinkling of the Observer design pattern.

  • Passing data from one frame to another frame

    hello all, i am having a problem with passing data from one frame from another. I have a main frame when you click on connect button it display the second frame(class) that has 2 text fields and 2 buttons. When i click on connect it check if the data is correct. If the data is correct i want that frame to close and pass the data back to main frame. How can i do that.
    thank you

    hello all, i am having a problem with passing data
    from one frame from another. I have a main frame when
    you click on connect button it display the second
    frame(class) that has 2 text fields and 2 buttons.
    When i click on connect it check if the data is
    correct. If the data is correct i want that frame to
    close and pass the data back to main frame. How can
    i do that.
    thank you
    the original problem sounded like an ideal opportunity to use Modal Dialog. if you want one frame to display another to get user input then you need to stop the method in the main frame from executing until you recieve a valid input.
    you can use your own class and keep all of the components that you have in the connect frame but you would have to extend JDialog instead of JFrame.
    there is a way around it!
    if you must use JFrame for both, then you need to have access to the main frame in the connect frame, maybe pass the pointer to the constructor??
    anyway, when the connect frame is done with its duties, you have to use the pointer to call another method in the main frame that will continue the process. otherwise main frame doesn't know when connect frame is done and by that time, the method in main frame that instantiated the connect frame has long since died.
    also, it allows things to happen in the other window that you may not want to happen until the connect frame is done
    typically users of software start clicking around on things and you could have three or four connect frames going at the same time
    it's really best to use a Modal Dialog, it really can look just like a JFrame!!!!!!!!!!!!!!

  • Passing data from a container to another

    Hi,
    Let's say I have two containers (Container1=application , Container2).  Container1 gets some data from user, perform some database lookup and displays Container2 with the results from database lookup.
    Container1 --(call and display)--> Container2
    Below shows  how I am using a bindable variable in Container1 to pass the data from Container1 to Container2.  Also shows how I display Container2 from Container1.
    <!-- Container1 -->
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
       [Bindable] public var foo:String = "bar";
       private function loginHandler(event:LoginEvent):void
          mycontainer2 = new Container2();
          mycontainer2.name = "mycontainer2";
          this.addChild(mycontainer2);
    </mx:Application>
    I am accessing the data in Container2 as follow:
    <!-- Container2 -->
    {mx.core.Application.application.foo}
    Q1) Is there a better way to pass data from one container to another and access the data?
    Q2) Is this the only way to call and display Container2 from Container1?
    Q3) How can I move back to Container1 from Container2, i.e. Container2 call and display Container1
           Container2 --(back to)--> Container1

    Best practices call for using custom events to share data between components. Here is my Flex 3 Cookbook post on the topic:
    http://cookbooks.adobe.com/index.cfm?event=showdetails&postId=15466
    To switch easily between containers 1 & 2 use a ViewStack, the gold standard for such interaction, and manipulate the selectedIndex or selectedChild property:
    http://livedocs.adobe.com/flex/3/html/help.html?content=navigators_3.html
    If this post answered your question or helped, please mark it as such.

  • Is it possible to pass data from a subVI before that subVI has finished executing?

    Basically this is my problem:
    1.  I have a subVI which contains a loop that reads data from a device for a specified amount of time.
    2.  I would like to graph this data in real time on the front panel of the main VI.
    So is there a way to pass data from inside the loop of my subVI to the graph of my main VI before the subVI has finished executing, and if so how do I do this?
    Thank you.

    How about using a global variable or a Queue?

Maybe you are looking for