Passing Internal Table to a Function Module.

I am new to Web Dynpro Abap. Using the Function Builder, I am trying to pass an Internal Table (IT) as an import parameter into my Function Module (FM), fill it within the FM and be able to recieve the filled IT back as an Export parameter from the FM to my program. My problem here is that I do not know how to specify the Internal Table as an import OR export parameter for a Function Module, I tried using the Table Tab, but it says that is obsoleted.
Anyone! Thanks.

Hi,
You want to pass the internal table to FM inside WD component and that table contains fields from diff table, right?
Open the FM through SE37. Goto 'Tables' tab of FM. Create table of type mentioned in the 'Associated Type' column of the FM. Fill the internal table with data and pass the internal table to FM.
You can create Table type with different fields through SE11.
I hope I interpreted your question correctly.
Regards,
Saket.

Similar Messages

Transferring an Internal table from one Function Module to another

Hi,
I need to transfer an Internal Table from one FM to another. I've tried the statements IMPORT IT from Memory ID and EXPORT IT to Memory ID, but this is not working. I think the reason is different session or diff LUW, I can not use SET and GET Parametr syntax, as I will not be able to pass Internal Tables through it.
Can any1 please give a solution on this?
Cheers
Abhishek

I'd agree with April that the easiest way to pass data directly from FM1 to FM2 is via "tables", but what is your overall code structure i.e. are you going:
Program
Call Function FM1
back to Program
Call Function FM1
or are you going:
Program
Call Function FM1
Call Function FM2 from FM1
In either case, I would expect the export / import to be working fine, at least it seem to when I tried it using:
export lt_data from lt_data to memory id 'Z:1234'.
import lt_data to lt_data from memory id 'Z:1234'.
Jonathan

Error while passing a table to a function module

Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
Changedocument_read_headers.
iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
In the function module interface, you can specify only
fields of a specific type and length under "I_CDHDR".
Although the currently specified field
"G_CDHDR_TAB" is the correct type, its length is incorrect.
Edited by: kiran kumar on Jul 7, 2008 8:53 AM

probably u making a mistake while declaring the table
declare it like this in the tables section:
S_JOB LIKE RNGE_OBJID
where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

Pass internal tables in Export Parameters of Function Module

Hi
How to pass internal tables through export parametes of the calling function module. i
think i can pass it by reference ....
if so can anyone suggest how to do it?

Hi,
You can Export values of an Internal table in two ways, by :
1) specifying in Tables tab
(Not recommended since it's an obsolete in ECC 6.0)
If used, will reduce the performance of the FM
Tables are always passed by reference
2) specifying in Exports tab.
The parameter should be a Table type (created in se11)
having a Line type that refers to the structure of the data.
Pass by Value is not used for Normal Function modules.
Used usually for RFC enabled FMs.
Cheers,
Remi

How to pass internal table to form routine..?

Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
 include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
 include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
 EXPORTING
 SHORTNAME = rwa_setheader-setname
 IMPORTING
 NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
 EXPORTING
 SETNR = v_setid
 TABLES
 SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please help

Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
 INCLUDE STRUCTURE t000. "<<-- Test with T000 instead "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
 CHANGING tb_set_values[].
*& Form read_sets_with_values
* text
* -->VALUE(RWA_SETHEADER) text
* -->RTB_SET_VALUES text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
 WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM. "read_sets_with_values
Regards,
RIch Heilman

Import and Export Vs. Tables in a Function module interface

Hi,
i need to import and export internal tables to/from a Function Module.
Passing internal tables using import and export is good enough or do i need to use 'Tables' option. Please let me know the reasons if possible.
thanks for your help.
GK.

you can use changing but you have declare a table type and use it in changing..
however TABLES is declared aas oblselete in ECC version 6.0
No Points Plz

How to Pass internal table from a program to Samrt form

Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
Praveen

Hai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b.

Passing request table to Jco function

Hello Experts,
We have one requirement where we need to pass the table data from the BLS to SAP Jco Function Module call. For example we are reading the material numbers from the oracle database and then we need to pass these material numbers to SAP Function Module as a table to read the further details from SAP for the given material numbers.
We wrote a custom function module in SAP which accepts the material number as table. Is it possible to pass the table request parameter to Function Module? If possible how can we do this? I tried to pass the XML document to Function Module table, but no luck.
Thanks
Mohan

Mohan,
in the BLT, configure the JCO action to use you custom function. After pressing enter, MII reads the xml structure of the function (if the connection MII to SAP is working). In the further processing of the BLT, you can fill the RFC table which you can see in the link editor using your query results and the link editor types "AppendXML" or "AppendAfter".
The following thread might help: [RFC call with multiple input|http://forums.sdn.sap.com/click.jspa?searchID=34070350&messageID=8134561].
Michael

ABAP OO - Passing Internal Tables from Method to Method

I'm new to writing methods.
I have a need to build an internal table in METHOD1 and pass the internal table to METHOD2. I'm confused how to declare the table in 'Parameter' section of the METHOD2. I have specified the following:
Parameter = WTAB1
Type = Import
Pass value = blank
Optonal = Blank
Typing Method = Type
Associated type = ZSCIW and this is declared in DDIC as a data type with fields ZZLINE(72) and ZZPOS(4)
Default value = blank
METHOD1 (simplified example)
method METHOD1.
Table of individual words from source code
types: begin of wline,
 WORD(72),
 POSN(4),
 end of wline,
 wlines type standard table of wline with default key.
data: wx type wlines,
 wa like line of wx.
Clear past results
REFRESH: Wx.
Look through source code...
LOOP AT ref_include->lines into wa.
 APPEND wa.
ENDLOOP.
Call METHOD2 and pass internal table wa
METHOD2 ( ).
1. How to you define the parameters in METHOD2.
2. What is the coding in METHOD1 to call METHOD2.
Your help will really be appreciated.
Thanks.
Soyab

For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
Check these links.
http://www.henrikfrank.dk/abapuk.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Go through the below links,
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
OO ABAP links:
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
go through these links
http://www.erpgenie.com/abap/index.htm
http://sic.fh-lu.de/sic/bic.nsf/(vJobangebote)/EC8AD2AE0349CE92C12572200026FDB8/$File/Intern%20or%20Working%20Student%20as%20ABAB%20OO%20Developer.pdf?Open
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
ABAP_OBJECTS_ENJOY_0 Template for Solutions of ABAP Object Enjoy Course
ABAP_OBJECTS_ENJOY_1 Model Solution 1: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_2 Model Solution 2: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_3 Model Solution 3: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_4 Model Solution 4: ABAP Objects Enjoy Course
ABAP_OBJECTS_ENJOY_5 Model Solution 5: ABAP Objects Enjoy Course
DEMO_ABAP_OBJECTS Complete Demonstration for ABAP Objects
DEMO_ABAP_OBJECTS_CONTROLS GUI Controls on Screen
DEMO_ABAP_OBJECTS_EVENTS Demonstration of Events in ABAP Objects
DEMO_ABAP_OBJECTS_GENERAL ABAP Objects Demonstration
DEMO_ABAP_OBJECTS_INTERFACES Demonstration of Interfaces in ABAP Objects
DEMO_ABAP_OBJECTS_METHODS Demonstration of Methods in ABAP Objects
DEMO_ABAP_OBJECTS_SPLIT_SCREEN Splitter Control on Screen
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
good book on ABAP objects(OOPS)
http://www.esnips.com/doc/bc475662-82d6-4412-9083-28a7e7f1ce09/Abap-Objects---An-Introduction-To-Programming-Sap-Applications
Rewards if useful..............
Minal

Add entries to database tables using update function module

Hi All,
I have a small requirement, in which I need to update Z-tables usimg update function module in update task. In the calling program, I have gathered the data in a field symbol value of type any. I need to pass the same to that function module to update the data which is in the field symbol.
Please guide me how to achieve this technically.
Thanks in advance,
Pradipta .

Hi,
I believe you already have evrything with you.....Start Coding the same and come back with any Coding issue.
I believe you will not be able to pass the Field Symbol in FM Interface.....You need to pass the Variable which Field Symbol is referring....

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

Passing Internal tables to Workflow

Hello all,
I learning workflow and have a small doubt related to passing internal table as parameter to workflow when it is triggered by a report program explicitely.
I wrote a prog to upload data from flat file into internal table and by passing this ITAB to the workflow for futher processing. Actually i succeeded in this with only one field in my flat file (lfa1-lifnr).
what if my flat file contains more than one field? (i.e., lifnr, name1, city, county) how should i declare the parameters for my EVENT (triggering event) and same with my container declaration?
Any inputs in this regards are welcome.
Thank you in advance,
Lakshmi Narayana

Hi Lakshmi,
Create Workflow container
swc_container lt_container.
swc_create_container lt_container.
Fill internal table with data
The container type and the internal table type should be same, U can use a structure to define both.
Declare a structure with all the fields.
Define a conatiner of same type of structure in worklow and set it in wait for event setp.
swc_set_table lt_container '<container_name>' lit_int_data.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = lc_objtyp
 objkey = lv_objkey
 event = lc_event
 IMPORTING
 event_id = lv_eventid
 TABLES
 event_container = lt_container
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2.
Rgds,
Prakash
Message was edited by: Prakashsingh Mehra

To pass internal table data(including subtotal) to dynamic internal table

here i am displaying the dynamic internal table in alv grid.
i followed like this but i am unable to get the subtotal form the internal table.
LOOP AT ITAB1. " assigning <fs_itab1>.
 ASSIGN COMPONENT 'RACCT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-RACCT.
 ASSIGN COMPONENT 'ERGSL' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-ERGSL.
 ASSIGN COMPONENT 'TEXT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-TEXT.
 I = 4.
 CLEAR COMP_ITAB.
 LOOP AT COMP_ITAB.
 ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 LOOP AT ITAB WHERE RACCT = ITAB1-RACCT.
 IF ITAB-RBUKRS EQ COMP_ITAB-RBUKRS.
 IF ITAB1-RBUKRS EQ COMP_ITAB-RBUKRS.
 <DYN_FIELD> = ITAB1-REPVAL.
 SUB_TOT = ITAB1-REPVAL.
 ELSE.
 <DYN_FIELD> = 0.
 SUB_TOT = 0.
 ENDIF.
 ENDLOOP.
 I = I + 1.
 TOTAL = TOTAL + SUB_TOT.
 ENDLOOP.
 ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = TOTAL.
 APPEND <DYN_WA> TO <DYN_TABLE>.
 CLEAR <DYN_WA>.
 TOTAL = 0.
ENDLOOP.
Thanks,
sridhar.

Hi Rakesh,
We pass internal tables for the smartform are shown in bold in below code,
CALL FUNCTION LF_FM_NAME
 EXPORTING
 ARCHIVE_INDEX = TOA_DARA
 ARCHIVE_PARAMETERS = ARC_PARAMS
 CONTROL_PARAMETERS = LS_CONTROL_PARAM
 MAIL_RECIPIENT = LS_RECIPIENT
 MAIL_SENDER = LS_SENDER
 OUTPUT_OPTIONS = LS_COMPOSER_PARAM
 USER_SETTINGS = ' '
 ZXEKKO = L_DOC-XEKKO
 ZXPEKKO = L_DOC-XPEKKO
 ZNAST = NAST
 IMPORTING
 DOCUMENT_OUTPUT_INFO = IT_DOCUMENT
 JOB_OUTPUT_INFO = IT_OUTPUT_INFO
 JOB_OUTPUT_OPTIONS = IT_JOB_OUTPUT
 TABLES
 L_XEKPO = L_DOC-XEKPO[]
 L_XEKPA = L_DOC-XEKPA[]
 L_XPEKPO = L_DOC-XPEKPO[]
 L_XEKET = L_DOC-XEKET[]
 L_XTKOMV = L_DOC-XTKOMV[]
 L_XEKKN = L_DOC-XEKKN[]
 L_XEKEK = L_DOC-XEKEK[]
 L_XKOMK = L_XKOMK
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
Regards,
Azaz Ali.

How to add internal table fileds in Text module in smart forms

Hi Friends,
How to add internal table fileds in Text module in smart forms?
Thanks & Regards,
Vallamuthu.M

Hi Vallamuthu ,
how did you solve your problem?
thanks,

Dynamic Export table of a function Module

Hi Friends,
I have a requirement where fields of Export table of my function Module is dynamic. It is like the Fields to be expoerted by the Function Module would be stored in a seperate Z table
The Z table would contain the records as follows .
Table Name              FieldName
=========
MARA                      MATNR
MARC                      WERKS
and So on..
. How can I define my Export table in Function module dynamically so that the structure of my Export Function Module would be same as that of the Fieldnames in Z table..
Thanks

Just declare the associate type as "ANY TABLE" in the exporting parameter.
FUNCTION ZTEST.
*"*"Local Interface:
*" EXPORTING
*"     REFERENCE(IT_TAB) TYPE ANY TABLE

Passing Internal Table to a Function Module.

Similar Messages

Maybe you are looking for