Passing request table to Jco function

Hello Experts,
We have one requirement where we need to pass the table data from the BLS to SAP Jco Function Module call. For example we are reading the material numbers from the oracle database and then we need to pass these material numbers to SAP Function Module as a table to read the further details from SAP for the given material numbers.
We wrote a custom function module in SAP which accepts the material number as table. Is it possible to pass the table request parameter to Function Module? If possible how can we do this? I tried to pass the XML document to Function Module table, but no luck.
Thanks
Mohan

Mohan,
in the BLT, configure the JCO action to use you custom function. After pressing enter, MII reads the xml structure of the function (if the connection MII to SAP is working). In the further processing of the BLT, you can fill the RFC table which you can see in the link editor using your query results and the link editor types "AppendXML" or "AppendAfter".
The following thread might help: [RFC call with multiple input|http://forums.sdn.sap.com/click.jspa?searchID=34070350&messageID=8134561].
Michael

Similar Messages

Error while passing a table to a function module

Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
Changedocument_read_headers.
iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
In the function module interface, you can specify only
fields of a specific type and length under "I_CDHDR".
Although the currently specified field
"G_CDHDR_TAB" is the correct type, its length is incorrect.
Edited by: kiran kumar on Jul 7, 2008 8:53 AM

probably u making a mistake while declaring the table
declare it like this in the tables section:
S_JOB LIKE RNGE_OBJID
where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

Passing Internal Table to a Function Module.

I am new to Web Dynpro Abap. Using the Function Builder, I am trying to pass an Internal Table (IT) as an import parameter into my Function Module (FM), fill it within the FM and be able to recieve the filled IT back as an Export parameter from the FM to my program. My problem here is that I do not know how to specify the Internal Table as an import OR export parameter for a Function Module, I tried using the Table Tab, but it says that is obsoleted.
Anyone! Thanks.

Hi,
You want to pass the internal table to FM inside WD component and that table contains fields from diff table, right?
Open the FM through SE37. Goto 'Tables' tab of FM. Create table of type mentioned in the 'Associated Type' column of the FM. Fill the internal table with data and pass the internal table to FM.
You can create Table type with different fields through SE11.
I hope I interpreted your question correctly.
Regards,
Saket.

Error in Java Program when passing table to RFC function . JCO is used

Hai All,
I developed a JAVA application to update data into SAP using JCO via RFC. When i pass table to the function module i am getting the below error
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Conversion from type T to D not supported.
Please let me know how to solve this.
Below is my code
IRepository m_Repository;
IFunctionTemplate ftemplate;
JCO.Table PwdReq;
JCO.Function function;
m_Repository = JCO.createRepository("MYRepository", client);
            ftemplate = m_Repository.getFunctionTemplate("Z_GESEFM_UPD_PWD_RESET_REQUEST");
// Create a function from the template
function = new JCO.Function(ftemplate);
// Feeding in input parameters
PwdReq = function.getTableParameterList().getTable("RESULT2");
String userid = "PATCHTEST14 ", reqDate = "",reqNo = "01",reqStatus = "03", boxID = "09",ind2 = "X",
                    lcode = "abcd",rem = "One record testing";
PwdReq.appendRow();
                PwdReq.setValue(userid, "USERID");
                PwdReq.setValue(reqNo,"REQ_NO");
                PwdReq.setValue(reqStatus,"REQ_STATUS");
                PwdReq.setValue(boxID,"BOX_ID");
                PwdReq.setValue(ind2,"IND2");
                PwdReq.setValue(lcode,"LCODE");
                PwdReq.setValue(rem,"OTHER_REMARKS");
            // execute the function with the input parameters
            client.execute(function);
Thanks & Regards,
H.K.Hayath Basha.

hi,
I am not very good in Java.
but try this code to giving input parameter.
function.getImportParameterList().setValue(userid, "USERID");
if you are not using Try and Catch blok then use Try and Catch blok,
Regards
Manoj

Problem passing a table parameter in rfc call using the function control

I try to pass a Table as parameter to a Function Module using the SAP.Functions library (part of SAP frontend controls) from a Visual Basic (VBA) program.
The function module has been verified to work when invoked from SAP FrontEnd Function Builder.
The SAP RFC Control is created with
Set sapFunctions=CreateObject("SAP.Functions")
Following code snippet shows how I attempt to set exports and add a table row before calling the function module:
sapFunctions.Connection = sapConnection
Set sapMaterialUpd = sapFunctions.Add("Z_SD_BAPI_SALES_DATA_UPD")
With sapMaterialUpd
'set exports
 .Exports("PA_GLPUPDLEVEL") = "S"
 .Exports("PA_VKORG") = "FI14"
'append table row
 .Tables("IT_SALES_DATA_UPD").AppendRow
 .Tables("IT_SALES_DATA_UPD")(1, "VKORG") = "FI14"
 .Tables("IT_SALES_DATA_UPD")(1, "MATNR") = "W_3100"
 .Tables("IT_SALES_DATA_UPD")(1, "DATBI") = "99991231"
 .Tables("IT_SALES_DATA_UPD")(1, "DATAB") = "20041231"
 .Tables("IT_SALES_DATA_UPD")(1, "KBETR") = "2222"
 .Tables("IT_SALES_DATA_UPD")(1, "KONWA") = "EUR"
End With
'call the function module
If sapMaterialUpd.Call() = True Then
 'do something with the return tables here...Else
 Debug.Print sapMaterialUpd.Exception
End If
The Call() returns FALSE and the exception is "SYSTEM_FAILURE". The connection also resets.
The local logfile that the control generates shows that an exception occurs at the point of the call:
10.02.2005 17:54:20.766 Packing Parameters for Z_SD_BAPI_SALES_DATA_UPD
Packing Parameter PA_GLPUPDLEVEL.
Packing Parameter PA_VKORG.
Packing Table 0.
Packing Table 1.
10.02.2005 17:54:20.766 *** Calling RFC Function 'Z_SD_BAPI_SALES_DATA_UPD'
10.02.2005 17:54:20.986 RFC CALL status = RFC_SYS_EXCEPTION
10.02.2005 17:54:20.986 RFC Error: RFC_IO27
-Status:CODE=CM_DEALLOCATED_NORMAL STATUS=CM_NO_STATUS_RECEIVED DATA=CM_COMPLETE_DATA_RECEIVED ID=69415076
-Message:connection closed
-Internal Status:IO HANDLE=23 DRV=EXT LINE=1420 CODE=27 : GET ID=ffff LINE=861 CODE=7
10.02.2005 17:54:20.986 Function call finished.
Seen next code snippet. If the Table object is not touched, the function call goes through without any problems:
sapFunctions.Connection = sapConnection
Set sapMaterialUpd = sapFunctions.Add("Z_SD_BAPI_SALES_DATA_UPD")
With sapMaterialUpd
'set exports
 .Exports("PA_GLPUPDLEVEL") = "S"
 .Exports("PA_VKORG") = "FI14"
 'do not append a table row, for testing only ;-)
End With
'call the function module
If sapMaterialUpd.Call() = True Then
 'do something with the return tables here...
Else
 Debug.Print sapMaterialUpd.Exception
End If
This code works perfectly when calling the function. It returns TRUE and behaves normally. The function module returns descriptive response text in a table telling that the table was empty, according to the BAPI implementation.
So is there something special needed here after appending the table row and before making the Call to properly attach the table as a parameter for the function module?
Can this be a bug in the SAP RFC Control? The version of the wdtfuncs.ocx is 6206.6.45.54.
Any hints are welcome!

hi All partner,
who solved this problem , I meet it too and
can't clear it.
SAPfunc := sapfunctions1.Add('z_get_sfcs_dn_mo');
SAPitab := sapfunc.tables.item ('I_DNMO');
SAPitab.appendrow; SAPitab.value(1,'MANDT') := '220';
SAPitab.Value(1,'VBELN') := '2150000001';
SAPitab.Value(1,'POSNR') := '50';
SAPitab.value(1,'MATNR') := '19-99999-00';
SAPitab.value(1,'AUFNR') := '921241512001';
SAPitab.value(1,'DEDAT') := '2005/09/09';
SAPitab.value(1,'LFIMG') := '100';
IF SAPfunc.call = true then
begin
end
else
 begin
 showmessage('call fail!!') ;
 end;
end;
RFC source code as below
FUNCTION z_get_sfcs_dn_mo.
""Local interface:
*" TABLES
*" I_DNMO STRUCTURE ZDN_MO
data: wa type zdn_mo.
LOOP AT i_dnmo.
 wa-mandt = i_dnmo-mandt.
 wa-vbeln = i_dnmo-vbeln.
 wa-posnr = i_dnmo-posnr.
 wa-matnr = i_dnmo-matnr.
 wa-aufnr = i_dnmo-aufnr.
 wa-dedat = i_dnmo-dedat.
 wa-lfimg = i_dnmo-lfimg.
 modify zdn_mo from wa.
 insert into zdn_mo values wa. --dump at here
 commit work.
ENDLOOP.
T/C: ST22 error message say at
insert into zdn_mo values wa. ---dump at here
the sapfunc.call returns fail.
Message was edited by: jorry wang

Jco Function issue : The initial password has expired (request a new one)

Hi Friends,
Could you please help me to resolve this issue. I am able to start my session using SAP Jco Start Action block. But while invoking the BAPI using
SAP JCo Function action block I am getting the below error. I am 100% sure that my credentials are correct. I am able to logon to ECC using SAP Front GUI.
I am using MII 14.0 patch SP4
Any help on this very much appreciated.
<Rowsets DateCreated="2014-07-22T12:33:49" EndDate="2014-07-22T12:33:49" StartDate="2014-07-22T12:33:49" Version="14.0 SP4 Patch 0 (Nov 22, 2013)">
<FatalError>JCOProxy error: Problem retrieving JCO.Function object: The initial password has expired (request a new one)</FatalError>
</Rowsets>]]
Thanks in advance
Shaji

Hi Friends,
This issue got resolved when I cleared the BAPI list cache at MII using below URL.
http://hostname:port/XMII/JCOProxy?Mode=Reset

Can I pass a table function parameter like this?

This works. Notice I am passing the required table function parameter using the declared variable.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(@Date) I ON i.ID = h.ID
WHERE h.SomeDate = @Date
But I guess you can't do this?... because I'm getting an error saying h.SomeDate cannot be bound. Notice in this one, I am attempting to pass in the table function parameter from the SomeTable it is joined to by ID.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(h.SomeDate) I ON i.ID = h.ID
WHERE h.SomeDate = @Date

Hi
NO you cant pass a table function parameter like this?
As When you declare @date assign value to it and pass as a parameter it will return table which you can use for join as you did it in first code
But when you pass date from some other table for generating table from your funtion it doesnt have date as it is not available there
Ref :
http://www.codeproject.com/Articles/167399/Using-Table-Valued-Functions-in-SQL-Server
http://technet.microsoft.com/en-us/library/aa214485(v=sql.80).aspx
http://msdn.microsoft.com/en-us/library/ms186755.aspx
https://www.simple-talk.com/sql/t-sql-programming/sql-server-functions-the-basics/
http://www.sqlteam.com/article/intro-to-user-defined-functions-updated
Mark
as answer if you find it useful
Shridhar J Joshi Thanks a lot

Pass internal tables in Export Parameters of Function Module

Hi
How to pass internal tables through export parametes of the calling function module. i
think i can pass it by reference ....
if so can anyone suggest how to do it?

Hi,
You can Export values of an Internal table in two ways, by :
1) specifying in Tables tab
(Not recommended since it's an obsolete in ECC 6.0)
If used, will reduce the performance of the FM
Tables are always passed by reference
2) specifying in Exports tab.
The parameter should be a Table type (created in se11)
having a Line type that refers to the structure of the data.
Pass by Value is not used for Normal Function modules.
Used usually for RFC enabled FMs.
Cheers,
Remi

Passing SORTED internla table to ALV Function Module

Hello all,
      I define a work area WA1 with reference I defined a table (itab) by using following statement.
      DATA: itab TYPE SORTED TABLE OF WA1 WITH UNIQUE KEY field1 field2 WITH HEADER LINE.
    I am unable pass the table itab to FM Reuse_alv_grid_display bcoz itab is sorted table. At the same time I can't define itab as a STANDARD table with UNIQUE KEY addition.
         If I define a itab as DATA: itab TYPE STANDARD TABLE OF wa1 WITH KEY field1 field2 WITH HEADER LINE.
I'm getting unnecessary day.
Give me suggestions.......

Hi
YOu cannot use Unique key for standard table as the key of the standard table is always Non-Unique.
Also dont use internal table with header lines as it is completely obsolete.
Please try the below statement.
DATA itab LIKE SORTED TABLE OF wa WITH UNIQUE KEY field1 field2.
Cheers,
Hakim

How to Pass internal table from a program to Samrt form

Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
Praveen

Hai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b.

PASSING INTERNAL TABLE IN SMARTFORM

HI' I M NEW TO SMARTFORMS, MY PROBLEM IS =THAT
I'VE CREATED A NEW TYPE(SAY TY_BKPF) IN THE DRIVER PROGRAM.
THEN I'VE DECLARED AN INTERNAL TABLE OF THIS TYPE.
TO PASS THIS INTERNAL TABLE INTO MY SMARTFORM I'VE PASSED THE INTERNAL TABLE'S NAME INTO THE FUNCTION MODULE UNDER THE TABLES PARAMETER.
BUT I'M NOT ABLE TO UNDERSTAND AS TO WHAT TYPE SHOULD I GIVE IT IN THE FORM INTERFACE IN THE TABLES TAB.
PLZ HELP.

Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
Also have a look at below sample code. It will give you idea abt the same.
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
 INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
 MOVE-CORRESPONDING MKPF TO INT_MKPF.
 APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
 formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
 FM_NAME = FM_NAME
EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
if sy-subrc <> 0.
 WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
 GS_MKPF = INT_MKPF
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
if sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Have a look at below link for more help on smart forms.
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

PASSING A TABLE TO ANOTHER PROGRAM

HII FRNDS
CAN WE PASS A TABLE TO ANOTHER PROGRAM . I AM CALING THAT PROGRAM USING SUBMIT COMMAND.
tHANKX
ROHIT

check this sample code..
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT report EXPORTING LIST TO MEMORY
              AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
hope this helps...

Request number of a function module.

Hi Experts,
Can anybody plz send me the table where the request number of a function module get stored.
(Function groups are stored in E071,But i need the request number for function module.)
If any function module for the same plz send it
Regards,
Anoop Chandran

Hi Martin,
My scenario is ;
i have 2 fn modules
Fn mod1 and Fn mod2 in fn group A
and i transported this to another server.
now i changed fn mod1 and transported.
so the request number of fn mod 1 get changed.
So my req is to not based on fn group.
And it depends on fn modules.
Can u plz gv me some idea to get the request number (tables or fn mods) of fn module??
Regards,
Anoop Chandran

How to pass internal table to form routine..?

Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
 include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
 include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
 EXPORTING
 SHORTNAME = rwa_setheader-setname
 IMPORTING
 NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
 EXPORTING
 SETNR = v_setid
 TABLES
 SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please help

Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
 INCLUDE STRUCTURE t000. "<<-- Test with T000 instead "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
 CHANGING tb_set_values[].
*& Form read_sets_with_values
* text
* -->VALUE(RWA_SETHEADER) text
* -->RTB_SET_VALUES text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
 WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM. "read_sets_with_values
Regards,
RIch Heilman

Dynamic table in RFC function

Dear all
I like to create a dynamic table in a RFC function and pass this table to the calling programm. Is this possible?
Herbert

Hi,
check the Below FM to create Dynamic table in RFC function ..
RFC_READ_TABLE -- External access to R/3 tables via RFC
RFC_GET_TABLE_ENTRIES -- Read table entries
Prabhu

Passing request table to Jco function

Similar Messages

Maybe you are looking for