Passing multiple single values to a Planning Sequence

Hi All,
      We are using BEx Analyzer for planning. We are passing multiple single values for a single variable , to a IP-planning sequence. Planning sequence is only taking the last value passed and ignoring the rest.
Multiple variable values are passed as below:
Name                            Index                 Value
VAR_NAME_1     1     ZCC
VAR_LINES     1     5
VAR_VALUE_1     1     A10000001
VAR_VALUE_1     1     A10000002
VAR_VALUE_1     1     A10000003
VAR_VALUE_1     1     A10000004
VAR_VALUE_1     1     A10000005
These cell references are passed to "command button" through the "Command Range" property.
The values are calculated correctly but for only one Cost center (last one in the list) , In this case only data for the Cost Center "A10000005" is processed and rest of the cost centers are ignored.
What am I missing here? I appreciate your help.
Patch Levels:
SAP GUI 7.10 (Patch 16)
BEx Analyzer 7.X SP 12
Thank you,
Math

Hi Indu Sharma - I have tried several combinations, but did not work.
VAR_VALUE_1
VAR_VALUE_2
VAR_VALUE_3
VAR_VALUE_4
VAR_VALUE_5
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_EXT_1
VAR_VALUE_EXT_2
VAR_VALUE_EXT_3
VAR_VALUE_EXT_4
VAR_VALUE_EXT_5
Thank you,
Math

Similar Messages

Passing Multiple Single Values from Sender Query to Receiver Query in RRI

Dear All.
We have 2 - Bex Reports ZBEX_1 & ZBEX_2
1. In ZBEX_1 having the fileds data like the below.
Account Doc. Number - Clearing Document --- Amount
12345                  - 65432                --- 100
12346                  - 54321               --- 50
2. In ZBEX_2 having the following data.
Account Doc.Number -- Amount
45342                     - 10
66666                        - 100
65432                       -   10
54321                      - 5
3. I am Traying to create RRI Between ZBEX_1 & ZBEX_2 , with Sender query as ZBEX_1 and Receiver query as ZBEX_2
If I drilldown from ZBEX_1 need to show the following output in the ZBEX_2
Account Doc. Number - Amount
65432                       -     10
54321                      -     5
i.e If Clearing Documnet in the ZBEX_1 is same as Account Doc. Number in ZBEX_2 those Account Doc. Numbers I have to show in the output of ZBEX_2 RRI Report.
Both the records I have to show at a time.
So please suggest me
1. How to pass Multiple Single Values to Next Query using RRI
2. How to Map Clearing Document to Account Doc. Number in RRI.
NOTE: Account Doc. Num length is same as Clearing Document
Please suggest me.
Thanks & Regards,
Kiran Manyam

Your scenario of passing values from multiple records in Source does not suit well for RRI Jumps.
In ZBEX_2 query, create a Replacement path variable on Clearing Document. In that Replacement path variable, use the Replacement with query option and choose the ZBEX_1 as the underlying query source.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/589b3c494d8e15e10000000a114084/frameset.htm
When you execute ZBEX_2, what ever clearing document values that ZBEX_1 has will be passed through the replacement path variable as a filter to the ZBEX_2
Hope it helps!
Uday Pothireddy

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

Passing Multiple Single values in User Exits

Hello All,
I have a requirement where in, a user could enter either a single value, multiple single values or a combination of a range and single values.
This set of values need to be passed on to a variable with in a user exit. I have been able to get either one single value to pass or one single range. I am unable to pass on multiple single values or a combo of a range and single value from the user entry.
I would appreciate if anyone could help me with the structure of the code to pass multiple single values or combo.
I was wondering if I would need to pass the values into an internal table first and then pass it to the user exit variable. However, as I am not a strong ABAP resource, I am struggling.
Any and all help is deeply appreciated.
Warm regards
Sunil

Hello Marc,
There are two requirements which I was trying to address.
1. IN few queries, the users enter either a range of profit centers or multiple single values in the pop-up window. I need to pass those values from that variable to an variable of type USer Exit to derive partner profit center values with in the query.
For this I have been able to pass values for either a single value or a single range. I am unable to pass on values for multiple single values or a combo of a range and single values.
2. I am trying to create a query for the top 5 customers to be used in the Corporate Performance Monitor. However, when I am trying to use the variable of type "replacement path", the system does not allow me to release it for OLE DB for OLAP.
To obviate this problem, I was hoping to create a variable of typeUSer Exit" and then pass the values from the variable of type "replacement path" to this variable.
Is it a workable solution? I was hoping that the method to pass the values in both the above scenarios might be similar.
Please guide me.
Warm regards
Sunil

How to pass multiple single values to parameter in planning function?

Hi!
I can not pass the variables (multiple single Values) from Input Layouts(BexAnalyzer) to Planning Function Types...Anyone have any idea for setting the parameter in the function types. I use the exit class CL_RSPLFC_BPS_EXITS.
My Parameter Type is Elementary and also use variables allowed

If you want to use the class as in a planning function type, proceed as follows:
1. Create an InfoObject that accepts the name of the function module as a characteristic value. We recommend that you create an InfoObject of type character with length 30 and indicate that this InfoObject is "Without Master Data".
2. In transaction RSPLF1, create a new function type. Chose the "Reference Data" option and enter the name of the class. This does NOT imply that reference data is read automatically, but results from the requirements for implementing the class.
3. On the "Parameter" tab page, create two parameters - one for the exit module and one for the init module. The parameters should be "elementary". Chose the InfoObject you created in step two as the dedicated InfoObject. The names of the parameters are determined from the values of constant P_C_NAME_EXIT_PARAM and P_C_NAME_INIT_PARAM.
4. If you require additional parameters in your function module (called exit parameters), you create these parameters as elementary parameters (with appropriate InfoObjects). Note an additional predefined parameter here - in many function modules, the name of the area is used from which the module is called. The area is not used in BI Integrated Planning but it may be the case that an area was created in BPS which only uses the current InfoCube. For this reason, you can create a parameter with the name specified in constant P_C_NAME_AREA_PARAM by specifying the name of this area to the function module. The value of this parameter is passed on to the function module in the interface as the value of the importing parameter I_AREA. Note that this technology can generally only by used for Basis InfoCubes and simple planning areas (not multi- planning areas or MultiProviders).
You can create additional elementary parameters as long as the names do not correspond to the predefined names. The class automatically recognizes the additional parameters and transfers them to table IT_EXITP in the function modules.
5. After you have activated the planning function type, you can create planning functions and fill the parameters accordingly.

Passing multiple single values from R/3 BAPI to BW Query in VC

Hi Experts
I have a VC model where I am calling an R/3 BAPI which is returning a table of customer accounts. I'm trying to go directly from that BAPI to a BW Query and pass the table of accounts into the BW Query.
The BW Query has been set up with a variable to accept multiple single values for accounts, and I have mapped the correct output field from the BAPI to the correct input field on the Query.
The BAPI does not seem to be passing the table of accounts into the Query. If I hard code a single account in the mapping of the BAPI to Query call, the Query successfully returns the data I expect.
Can I pass a table of accounts to a BW Query in this way?
Many Thanks
Tom

Hi
Have you tried with 'Group & Combine' operator. Just add this operator & join your BAPI & BI Query to this. Then in ths configure of this oparator select the 'Accoount' field & gourp the data accordingly. Also specify the aggregation if required. & in the table/chart after the operator select the fields which you want to show.
I hope this is what you are looking for.
Regards
Sandeep

Passing multiple single values in VC

I have a model where ii have 2 views Detail & Summary. Im passing some values from one table to another using a intermediate query. Its not passing multiple values. My wauery has variable set as 'Multiple Single Values'. If i pass a single value it works.
Im on VC FLEX2 SP14.
Cheers,
Vikram

Hi
Go to the properties of first table -> Selection -> Multiple selection. Then join output of this table to your intermediate query through variable port & then drag second table. Also in joining line -> assigned field use 'infoobject name_key' for every field for which you are passing the values.
Regards
Sandeep

Multiple single values variable

Hello all
I want to execute planning sequence throue button in my analyzer workbook.There is a multiple single values variable in the function. I know the regular way to write variable's value in excel: VAR_VALUE_1 1 Value. What is the format for a multiple single values variable ?
Best

Hello,
You can try this
Enter VAR_NAME_1 in the Name column and the technical name of the variable in the Value column.
Enter VAR_LINES_1 in the Name column and the number of values to be passed in the Value column.
Enter VAR_NAME_2 in the Name column and the technical name of the variable in the Value column.
Enter VAR_LINES_2 in the Name column and the number of values to be passed in the Value column.
Now, in excel sheet in 3 consecutive columns enter the fields as below:
VAR_VALUE_1, <index> and <value1>
VAR_VALUE_1, <index> and <value2>
VAR_VALUE_1, <index> and <value3> etc.
and similarly for second variable:
VAR_VALUE_2, <index> and <value1>
VAR_VALUE_2, <index> and <value2>
VAR_VALUE_2, <index> and <value3> etc.
You can specify the above cell range in command range as it is done in the static parameters window. In Excel sheet hide these cells and use cell references to other cells for the variable values to provide a more user friendly appearance.
Regards,
Deepti

Copy using Variables with multiple single values in BEX

Hi,
I have a requirement wherein on executing the planning function, the system should take the FROM and TO values of 0FISCPER and copy the data accordingly.
Source variable is 'Single Value'.
Target variable is 'Multiple Single Value'.
I tried to give the Command Range as below:
$A$30:$C$31.
The button sequence is as below:
VAR_NAME_1      0         ZFISCPER
VAR_VALUE_1     0
VAR_NAME_2      1         ZFISCPER_M
VAR_VALUE_2     1
In the Analyzer, I entered the values as
In A30, VAR_NAME_1     0     =C20
In A31, VAR_NAME_2     1     =C21:C24
The values that I entered are as below:
C20 =   2007001 - Source value
C21 =   2007002 - Target values
C22 =   2007003
C23 =   2007004
C24 =   2007005.
The problem that Im facing is the system is unable to identify the multiple values that I enter for Target Fiscper and it displays as :#VALUE!
How to enter multiple single values and reference them accordingly?
Rgds,
Shyam

Hi,
I have tried to enter multiple single values as below:
VAR_VALUE_1     0     000 - Source
VAR_VALUE_1     1     003 - Target
VAR_VALUE_2     1     010
VAR_VALUE_3     1     080
VAR_VALUE_4     1     099
When I tried to execute the planning function, the system copies the data from version 000 to ALL versions irrespective of values entered above.ie:
1
2
3
10
80
99
100
110
Rgds
Shyam

Passing multiple character values from parameter form to PL/SQL

Hi,
I am passing multiple character values from parametr form into
the report query and a PL/SQL procedure. It works fine with the
query, when I use &variable. But, it doesn't compile in PL/SQL,
so I just used the :variable, but not getting any records in the
PL/SQL procedure. Any suggestions?
sincerely,
gj

gj / Fedro,
Only using the &referecne, you can pas a string / multiple character values and this would work for query only.
The bind parameter in PL/SQL wouls support only single value
Thanks
The Oracle Reports Team

Passing multiple integer values as parameter in SSRS

Hello,
I am trying to pass a comma separated multiple integer value parameter in SSRS report and it errors out complaining that it is not able to convert the nvarchar value to datatype int. But it works fine when I pass a single value. Here is the code I am using
for the report and I am stuck at passing multiple values.
SELECT
id,count(*) as cnt
from table
and ID in (@id) group by id
eg: if I pass 10,20,30 then I would get error however if I pass 10 then it works fine
Is there a different method to pass multiple integer values?
Thanks for your help.

A comma is, of course, a textual character and not an integer, thus the error you are getting. Multi-value parameters can be used for this.
Select "Allow multiple values"and set data type to Integer. Multi-value parameters deliver the values as an array. The query interface is smart enough to convert them to the proper syntax (comma-delimited) automatically so a statement like:
WHERE Field IN (@id)
where the parameter has an array of values {1, 2, and 3} is interpreted as:
WHERE Field IN (1,2,3)
You do not need to manually convert it in a transact SQL query. That is not the case for displaying the value array in your report. If you wish to display the array (described above) in your report as "1, 2, 3", you will need to use a join expression:
=Join(@id, ", ")
As DJ described, the other part to a multivalue parameter is the Available values. These can be set explicitly but given your example, I think it would be best to create a new dataset that retrieves a distinct list of the IDs that can be retrieved, perhaps
something like:
SELECT DISTINCT GroupName, GroupID
FROM table
WHERE [criteria]
Set the available values to use this query with GroupName (or whatever user-friendly field you choose for your dataset) as the label and the id as the value. The label field should be something the the target report user can easily identify the correct group
using.
If you don't want to or can't use a multivalue parameter for some reason then you will need to manipulate your parameter value prior to consuming it in your query. When you add the parameter to the TSql query and save the dataset, SSRS adds it to the Parameters
property of the dataset. Open the dataset properties and select the parameters tab. You should see your parameter in the list. click the expression builder (fx) button next to the value and enter this expression:
=Split(@id,",")
Note that the second element of the expression is the delimiter. If your text input has comma-space as a delimiter (1, 2, 3 vs 1,2,3) then that element must include ", ". My example just has comma so if you use that with a string "1, 2, 3"then
the resulting array will still have 3 elements but the 2nd and 3rd elements of the array will have a preceding space which will cause your dataset to error with the same error. As long as there are no non-numeric characters in any of the elements, the split6
will create the text array, SSRS will dynamically generate the correct "IN"syntax (comma separated) and SQL will convert the elements from VARCHAR to INT on the fly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Variable multiple single value filled with customer exit used in FOX form.

Hi guys, I definitly need your help in the following scenario:
I have variable (multiple single value) filled in a customer exit and use it in web template. There it is used in the drop down box for selecting a special date in the analysis item. And there comes the first question:Why the results from the customer exit are written in the way "date1; date2; date3" in one line? They should appear line by line in rows. How can I influence that? I tried both data binding types, "variable" and "characteristic".
Now a button raises a planning function with a fox formula which should write the selected date (from the drop down box) in a customer table using "call function".
I always get the error, that I need to restrict the variable to "single value". Why do I have to do that and if necessary how can I do that? Other planning functions without the fox formula also work properly with using the selection from the drop down box.
I appreciate you help.
Kind regards, Anja.

Hi Vamsi.,
Try this code.
WHEN 'PREVIOUS_YEAR_1'.
IF I_STEP = 2. "after the popup of user entry
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCURRENT_YEAR_PERIOD'.
break-point.
IF SY-SUBRC EQ 0.
WA_YEAR = LOC_VAR_RANGE-LOW+0(4). "Year
WA_MONTH = LOC_VAR_RANGE-LOW+5(3). "Period
WA_YEAR = WA_YEAR - 1.
CONCATENATE WA_YEAR wa_month INTO WA_FISC_PERD .
CONCATENATE WA_YEAR WA_MONTH1 INTO L_S_RANGE-HIGH .
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
ENDIF.
ENDLOOP.
endif.
Assing points if it helps you.
-- Selva

How to avoid SYSTEM_NO_TASK_STORAGE with multiple single values variable

Hi experts,
I am trying to do a distribution with reference data standart SAP function.
Fields to be changed:
ZPDHIER2 (Economic Group II)
ZPDHIER3 (Economic Group III)
ZPDCLIENT (Client)
Fields for condition:
KEY FIGURE NAME
Fields for reference:
KEY FIGURE NAME
ZPDSTATUS (Status)
FISCPER3 (Fiscal Period)
The parameters group is like:
Fields for condition:
Key figure: ZM_070 (one of the key figures)
Fields for reference:
Key figure: ZMONT_TN
FISCPER3: 001
Status: DE
- "Only distribute not assigned" is checked
I do not want the data to be distributed by any ZPDHIER2, ZPDHIER3 and ZPDCLIENT so I have restricted these characteristics in the planning level by some variables. These variables are user exit type and return multiple single values.
The issue regarding this message is that when I execute this function, depending on the size of the data brought by ZPDCLIENT user exit variable, this dump might or might not occur. As for the testing I've done, i realize that if the number of clients exceed 500, dump will occur.
This multiple single values variable (or any other solution) must be prepared for 3900 clients, and this number is expected to increase.
Anyone have faced same problem?
Hope you can provide me some help regarding this issue.
Tanks in advance,
André Oliveira

Hi Wadih saad,
I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
Make the available space and do the export it will work.
Regards,
Maheswaran J

BPS-dynamic columns-single value in the planning level.

Hello, we would like to use a compound characteristic in dynamic colums.
Based on test and documentation we already know that we can use compound characteristics in dynamic columns only if the higher-level characteristic is restricted to a single value in the planning level.
If we use a variable restricted to a singel value per user it does not work. Does it mean in general that a varibel cannot be used in that case and that we have to create about 30 planning packages with a fixed value for the higher level charactersictic?
Thanks for help.

This is solved now with support package 12

Subject: BW Query Variable – Multiple Single Values

I have set a characteristic variable on process chain id. In General tab, Variable is u201Cprocess by manual inputu201D.
In Details tab, I set:
Variable represents Multiple Single Values, Variable is ready for Input
When I run my query, I can select multiple process chain ids. Problem is query returns process chain information for only one value (first value entered for process chain id in multiple selections. I have verified process chain information exists for all the multiple values.
Appreciate any feedback.

Thanks, I do not find any other restrictions. If I simply remove the variable which lets me spacify multiple single values, I see
all the process chains. When I add this variable to query under retsriction and run the query, I see pop-up and I can enter multiple values, but only first one is being searched. There is probably some setting in variable definition somewhere that it only processes first value.
Is there a way in RSRT to show me entire ABAP code of the query.
I ran RSRT set some break points but it is kind hard to troubleshoot. If I had the entire code, I can try to understand what is being done.

Passing multiple single values to a Planning Sequence

Similar Messages

Maybe you are looking for