Passing multiple values to select-option low by submit at one go from zpro.

Hi all,
I have a requirement pass descrete multiple values form my z-program to to select-option low on selction screen of standard SAP program using SUBMIT statment at one go.At the same time select-option high will be empty.I will be thankful if anybody can help me in this regard.
Sandeep.

Hi Check this link...on submitting programs
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db9d7535c111d1829f0000e829fbfe/frameset.htm
here is the code . we are calling the same program....you can call any other program as well.
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.

Similar Messages

How to pass Multiple entries of select-options to FM

Hi friends,
        i need to pass values date_from and date_to of FM BAPI_AR_ACC_GETSTATEMENT in my report. i have select-option in the selection screen for the posting date i.e, s_pstgdate-low = date_from and s_pstgdate-high = date_to.
    My question is how to pass values if the user enters multiple entries in s_pstgdate (selection-screen).
    Hope i'm clear with my question.
    Thanks in anticipation.
Regards
Poorna

Hi,
This is not possible.
You may wish to call it multiple times with each row of your select-option, and consolidate the returned records.
Better is to restrict the select-option with no-extension.
cheers,

Multiple records in select options-Urgent help

Hi all,
Iam using the following function module to get the set values. I need to pass multiple values in select options(ie) select options with no intervals. to the function module parameter Shortname. I have declared the variable which has to be passed as
S_SETID FOR SETHEADER-SETNAME NO INTERVALS.
The problem is when i use S_SETID-LOW the value is passed to the function module , but if multiple data is entered in the input then how to pass all the data to the function module. Please Help.

Hi,
Declare the Range in the Function module , then you can pass that Select-option fields to that ranges and use that in the Function module.
Or you can use the RANGE_C8 for the Select-optios in the Function module, you can declare the Internal table with the type of RANGE_C8 in the tables parameter, then pass the Select-option to this Internal table
If you want more length field then search based on RANGE_* then you will get all the Range Structure.
Regards
Sudheer

Passing value to select options screen.

Hi All,
Can anybody help me how to pass a value to select option screen from another screen?
It's like a user enters a value in a input field and press a button to navigate to the next screen which contains the select option fields.How can i show the value enterd in the previous screen to be shown in one of teh input field in the select option screen.

Hi,
Store the values that you have to pass in a global variable declared in component controller and
Use the following piece of code in the second view,
DATA: lt_range_table TYPE REF TO data,
          rt_range_table TYPE REF TO data,
          read_only TYPE abap_bool,
          typename TYPE string.
* create a range table that consists of this new data element
lt_range_table = lo_r_helper_class->create_range_table( i_typename = 'MATNR' ).
FIELD-SYMBOLS: <tab> TYPE INDEX TABLE,
<struct> TYPE ANY,
<wa> TYPE ANY,
<option> TYPE char2,
<sign> TYPE char1,
<high> TYPE ANY,
<low> TYPE ANY,
<wa_values> TYPE ANY.
ASSIGN lt_range_table->* TO <tab>.
APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
<sign> = 'I'. "Default sign which you want to give
<option> = 'EQ'. "Default option you want to give
<low> = 'M-01'." pass your valriable name here
*<high> = 'High_value'.
* add a new field to the selection
lo_r_helper_class->add_selection_field( i_id = 'S_MATNR'
i_description = 'Material'
it_result = lt_range_table ).
Regards,
Radhika.

Difference between Multiple single values and Selection option variables

Hi !
Can any one tell me the difference between variable types:
Multiple single values and Selection option?
I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
Is there some difference in functionality or can they be used interchageably?
Regards,
Sri Harsha

Harsha,
When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
Just check out there... you will be having tabs for each..
Assign Points if it helps
Gattu

Passing Multiple Values from Multi Select

Hi,
My requirement is simple. I have created a simple Multi Select Option in parameter form and i want to send multiple selected values from the multi select option (in parameter form) to reports.
eg:
I want to send multiple countries code as input .........'US', 'CA', 'IND', 'UK'
Can i do it in Oracle 6i reports, Thanks in Advance.
Regards,
Asgar

Hi Thanks Again,
For such a nice response. I got the Lexical Where condition properly running but still getting problems in catching the multiple values to be passed from form. just i will give u an insight of wat i have done:
SQL:
SELECT ALL FROM EMPLOYEES &cond_1* -- Working FIne
in my Html Parameter Form i have an Multi Select component (the Problem is here) it is not passing more than i value from the form once i am accessing it from web or running it in paper report. In paper report layout it is not allowing me to select more than one value. but in HTML it is allowing to select multiple values but at the server end (After Parameter Form Trigger) it is giving a single value not multiple values.
In PL/SQL when i checking the length of country_id i m getting it as one.
Here is my SQL code
srw.message(10, LENGTH(:country_id_1));
:cond_1 := 'where country_id = '''|| :country_id_1 ||'''';
This is passing the condition properly to SQL but only with single value but i want to pass multiple values
I am struck in this+_
WHERE CONTRY_COLUMN IN ('USA','UAE') -- This variable you have to pass from you form...
Here as you said you gave multiple selection in your parameter form to generate report. So before generation report just prepare variable like this as it is bold above.
and pass parameter through your runtime form to the report as you pass the normal parameter...liket this i gave you example...
ADD_PARAMETER(PARAMETER_LIST_NAME,'P_CONT_PARAM',TEXT_PARAMETER,vString);
Sorry for troubling you for a small thing but please help me to solve this issue.
Thanks Again............
Asgar.

How to pass values to select options of custom transactions?

I have to call custom transaction-ZMM_POST from my custom report.
I have to pass values to select options(Not to parameters) of ZMM_POST from my report only.
Please tell me how to pass values to select options of custom transactions?

Have you tried this?
DATA: T_RSPARAMS TYPE STANDARD TABLE OF RSPARAMS WITH HEADER LINE.
T_RSPARAMS-SELNAME = "S_BUKRS".
T_RSPARAMS-KIND = "S".
T_RSPARAMS-SIGN = "I".
T_RSPARAMS-OPTION = "BT".
T_RSPARAMS-LOW = "100".
T_RSPARAMS-HIGH = "300"
APPEND T_RSPARAMS.
SUBMIT Z_DUMMY WITH SELECTION-TABLE T_RSPARAMS.
Greetings,
Blag.

Passing Multiple Values from a worksheet to PL/SQL function.

Hi All,
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
I will try to explain the scenario:
We have a crosstab report that showing all the customer details, deposit sum of a customer in each date in a date range selected. With the customer details we are showing the Rank of a customer based on the deposit in the latest date selected. Filtering is based on the rank, ie Top50 or Top60 etc.( As I said rank is calculating based on the deposit in the latest date).This is working fine.
Now the new requirement is to : For example, in Top50 report, list all the customers, who were in the Top50 list, in any of the dates selected. We are able to display the daywise rank, but when giving a condition like daywiserank <= 50, the result becomes uncertain. Some blank lines, wrong amounts etc..
As a work around we tried to find out the rank in a PL/SQL function. But the issue there is : we have some multiple value parameters used in the worksheet.
Is there any way to pass multiple values selected in a worksheet to a PL/SQL function ?
Or any other work arounds for the scenario explained?
Reagrds,
Jeneesh

Hi Russ,
Thanks for the response.
Russ Proudman wrote:
1. I thought there was an analytical function similar to rank - or maybe an option of rank - that if there are duplicate records to have them all considered the same rank. So if you had 3 records all the same as rank=2 then a condition saying where rank=2 would return the 3 records. You could check into this.
We are already using DENSE_RANK. But the issue is the output contains incorrect null values nd repeated rows.
We got it solved as I explained in the previous post. But will that AGGREGATION MODE setting ( Which discoverer says - not recommended) have any issue? I mean side effects?
Russ Proudman wrote:
2. Another thought is that you can create a PL/SQL routine - that's called from a SQL function registered in Discoverer - where a table is created that does the first part of your query. Then a worksheet is created to use the data from that table. So, in essence, the table would have your top50 ranked customers. Then you can write any kind of worksheet against that table. However, DBAs are loath to allow tables - that they didn't create! - many times in a PROD environment.
Here also the same problem will occur: as the top 50 will depend upon the parameters. I cannot pass those parameters to PL/SQL Function.And storing the top50 ( itmay be top100 or to 150 also) for all combinations of the parameters is impossible
Russ Proudman wrote:
3. Finally, are you sure you're rank function is correct in that if you're getting blank lines, maybe the 'over' part is not considering all columns needed to determine the rank?
Yes the query we are using is correct. The output QUERY of discoverer gives correct results in Sqlplus.
Regards,
Jeneesh

Default value for select options.

Hi folks
I have to default four values in select-options.
eg.,
S_lfart for likp-lfart, default zse, zin, znd, zps.
Thanks in Advance,
Rao

Hi,
Go through the following syntax:
SELECT-OPTIONS <sel> FOR <f>
               [DEFAULT <g> [to <h>] [OPTION <op>] SIGN <s>]
               [MEMORY ID <pid>]
               [LOWER CASE]
               [OBLIGATORY]
               [NO-DISPLAY]
               [MODIF ID <key>]
               [NO-EXTENSION]
               [NO INTERVALS]
               [NO DATABASE SELECTION].
Declares a selection table <sel> for the field <f>. For <sel>, places input fields on the corresponding selection screen. The additions allow you to set a default value, accept input in lowercase, define a required field, suppress or modify the display on the selection screen, restrict the selection table to a line or a selection to a single field, or prevent input from being passed to a logical database
Regards,
Bhaskar

Multiple records with select option

i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name from sm35, the table from where data is retrieved is APQI, i have used a parameter before using select option ,like:
selection-screen begin of line.
parameters: P_grpid like apqi-groupid.
select-options: s_grpid like apqi-groupid.
selection-screen end of line.
AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
{the code starts
FM F4 selection is called}
AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
FM F4 selection is called}
now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
Thanks
Swarnali

Hello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin.

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How can i pass multiple values by a single variable to EXECUTE IMMEDIATE

Hi All,
I want to pass multiple values for where condition for execute immediate. Something Like this:-
bold
Declare
v_cond varchar(1000);
Begin
v_cond := '''INR','USD'''; --(OPTION 1)
v_cond := 'INR,USD'; --(OPTION 2)
EXECUTE IMMEDIATE 'Delete from table where colm in (:v_cond)' using v_cond;
END;
bold
I am using this into a procedure
Now option 1 gives an error ie a syntax error (; expected or something like that)(I am sorry, i can't tell the exact error here as i am not in the office right now)
and option 2 makes the procedure execute but obviously doesn't delete the records, as it takes the whole as one.
Please Help
Regards
Neeraj Bansal

See the links containing examples under
*7. List of values in an IN clause?*
SQL and PL/SQL FAQ
from the SQL and PL/SQL FAQ.

Passing multiple values to a parmeters in SQL Query

Hi friends,
I have the following requirement -
I need to pass multiple values to the parameter 'WHERE hou.name = (:id1)' and the query is copied below for your reference .
SELECT partno part_num,
     customer customer_name,
     hou.name op_name
     FROM hr_organization_units hou,
     oe_transaction_types_all sot,
     ra_customers rc,
     ra_addresses_all ra,
     ra_site_uses_all rsu,
     oe_order_headers_all h,
     oe_order_lines_all l,pwr_sod50 ps
     WHERE hou.name = (:id1)
-- and hou.name = (:id4)
--hou.name in ('CPS FRANCE','CPS GERMANY')
--and hou.name = (:id1,hou.name)
     and trunc(ps.sch_ship_date) between nvl(:id2,trunc(ps.sch_ship_date)) and nvl(to_date(:id3)+.99999,trunc(ps.sch_ship_date))
     and ps.group_id = 9999999
     and hou.organization_id=h.org_id
     and ps.line_id =l.line_id
     and l.header_id =h.header_id
     and h.invoice_to_org_id=rsu.site_use_id
     and rsu.address_id =ra.address_id
     and ra.customer_id =rc.customer_id
     and h.order_type_id =sot.transaction_type_id
Looking for your help on this.
Thanks In Advance.
Thanks & Regards
Ramya Nomula

Hi karthik,
I am sorry for the wrong updation of my anonymus block.
My requirement is to pass a multiple values to the parameter in SQL query, and here is the code which is working now for the multiple values with ourt single quotes to the values -
SELECT partno part_num,
     customer customer_name,
     ps.customer_id customer_id,
     avail_qty avail_qty,
     sch_ship_date schedule_Ship_date,
     so_num order_no,
     h.header_id header_id,
     line_num line_no,
     l.ordered_quantity ordered_quantity,
     scd_qty qty_open,
     s_price unit_price,
     part_flag flag,
     sub_inv subinv,
     sbu,
     hold,
     qoh,
     line_detail_id detail_id,
     picking_line_id,
     picking_line_detail_id,
     rc.customer_name cust_name,
     rc.customer_number customer_number,
     rsu.location location,
     sot.attribute5 order_type,
     ps.line_id line_id,
     h.transactional_curr_code transactional_curr_code,
     hou.name op_name
     FROM hr_organization_units hou,
     oe_transaction_types_all sot,
     ra_customers rc,
     ra_addresses_all ra,
     ra_site_uses_all rsu,
     oe_order_headers_all h,
     oe_order_lines_all l,pwr_sod50 ps
     WHERE ','||:id1||',' like '%,'||hou.name||',%'
     and trunc(ps.sch_ship_date) between nvl(:id2,trunc(ps.sch_ship_date)) and nvl(to_date(:id3)+.99999,trunc(ps.sch_ship_date))
     and ps.group_id = 9999999
     and hou.organization_id=h.org_id
     and ps.line_id =l.line_id
     and l.header_id =h.header_id
     and h.invoice_to_org_id=rsu.site_use_id
     and rsu.address_id =ra.address_id
     and ra.customer_id =rc.customer_id
     and h.order_type_id =sot.transaction_type_id;
Condition for sending multiple Oprtaing Units -
WHERE ','||:id1||',' like '%,'||hou.name||',%'
This above condition is working when i am passing multiple values with out single quotes...but not working for multiple values with single quotes.
Sample queries tested -
select 1 from dual where ',aa,bb,cc,' like '%,bb,%' (This is working)
select 1 from dual where ','aa','bb','cc',' like '%,'bb',%'(This is not working).
Thanks In Advance!
Looking for Your Great Help.
Thanks & Regards
Ramya Nomula

Passing multiple values to a single input parameter

Hi folks,
I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type the query then fails;
Generated SQL that works looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101')
a11
When choosing more than one value in Microstrategy the SQL now fails and looks like this;
select
sum(a11.TOTALQUANTITY) WJXBFS1
from
"_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', '101'),
'PLACEHOLDER' = ('$$MoveType$$', '103'))
a11
If I cut and paste the SQL and run directly in HANA studio the error is;
Could not execute 'select sum(a11.TOTALQUANTITY) WJXBFS1 from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER" ...' in 66 ms 361 µs .
SAP DBTech JDBC: [2048]: column store error: search parameter error: [2018] A received argument has an invalid value;TABLE/VIEW parameter: ( 'PLACEHOLDER'='$$MoveType$$, 103') not supported
Is it possible to pass multiple values in a single parameter? I'm using SP67 for this test.
Thanks,
-Patrick

Ravi, also to answer one of your questions about how this will work in Microstrategy; I just heard back from my Microstrategy developer and he is trying MSTR Freeform SQL query with syntax like this;
select (sumPAR_TEST.TOTALQUANTITY TOTALQUANTITY
from "_SYS_BIC"."MyPackage/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' =('$$MoveType$$', '[Movement Type]')) PAR_TEST
In this example [Movement Type] is the microstrategy prompt. Unfortunately though it translates like this which is missing extra single quotes around each value;
select     sum(PAR_TEST.TOTALQUANTITY) TOTALQUANTITY
from     "_SYS_BIC"."development.pr1959/CA_TEST_PASS_PARAMETER"
('PLACEHOLDER' = ('$$MoveType$$', ''101', '102''))   PAR_TEST
instead of what we need which is;
('PLACEHOLDER' = ('$$MoveType$$', '''101'', ''102'''))   PAR_TEST
So at this point we are not sure if this will be possible or not.
-Patrick

Passing multiple values to select-option low by submit at one go from zpro.

Similar Messages

Maybe you are looking for