Passing parametwers as iView parameter to a Dashboard

Hello,
I try to enter some parameter into a Dashborad iView, so that this parametzers are mapped to the input parameters
of a Dashboard.
But it will not works.
Which fields in the Dashboad iView must I filled out so that the parameters mapped to the input parameters of a Dashboard. Is there a special syntax of such a parameter string?
I could communicate via Portal eventing with a Dashborad and could also send the parameter as XML to a Dashboard.
But in my case I could not use Portal eventing.
Kind regards
Hans-Dieter

Hi Prakash,
I have developed a tool to start several kinds of reports, transaction, Visual composer apps,...
This application will be displayed in a headerless portal window.
So my application and the started application are not on the same page and than portal eventing will not works.
An other problem is that I start the application and fire the event. Normally the event is fired before the application is running and so the application could not react of the event.
The only way to solve this problem is to wait that the application is completly launched but _I won't build in coding that is waiting for maybe 5 seconds or something like that.
Kind regards
Hans-Dieter

Similar Messages

Passing multi-value parameter from BIEE dashboard to BIP report

It is possibile passing multi-value parameter from BIEE dashboard prompt to BI Publisher integrated report? (BIP report has a DB data source (not a answers))
Thank you
R.

Hi Rajkm,
In order to pass a multi-value parameter through the Reporting Services Web services, you need to define the same numbers of ParameterValue objects as the number of the values of the multi-value parameter being past into the report. The Name property
of these ParameterValue objects must be specified same to the parameter name.
I found a good FAQ article for this scenario:
How do I pass a multi-value parameter into a report with Reporting Services Web service API?:
http://blogs.msdn.com/b/sqlforum/archive/2010/12/21/faq-how-do-i-pass-a-multi-value-parameter-into-a-report-with-sql-server-reporting-services-ssrs-web-services-api.aspx
Hope this helps.
Elvis Long
TechNet Community Support

Passing parameter to a Dashboard prompt

Hi,
In this case i cant pass the number value to the target report.
P4=eq&P5="IsyeriTanimlari"."DWH_ISYERI_KOD"&P6="Isyeri"."IsyeriKodu"
Also when i use
P9='||CAST("Time"."GUN" AS char)||' when i right some more parameter after this cast it cant take the parameters that ones put this cast one:?
''||'Kampanya'||'<a>'

Hi Tani,
Just to make sure, you're passing a parameter to a Dashboard and not Answers right?
Here's the syntax I've had success with:
http://localhost:9704/analytics/saw.dll?Dashboard&Action=Navigate&PORTALPAGE=<path of dashboard>&Page=<page path, this is optional>&col1=<full column name>&val1=<value>
In your case the following should work:
http://localhost:9704/analytics/saw.dll?Dashboard&Action=Navigate&PORTALPAGE=<path of dashboard>&col1="IsyeriTanimlari"."DWH_ISYERI_KOD"&val1=<value>&col2="Isyeri"."IsyeriKodu"&val2=<value>
Hope that helps!
-Joe

Can we pass epuser as a parameter?

Hi,
Can we pass epuser as a parameter to the Transactio iview or filed in the R3?
While we creating an iview, application parameters or when we create in webdynpro ivew how can we pass? if how can and what can we write there?
any help please.
regards
Kumar.

Hi Kumar
If you intend to send static parameter only, you can just pass it using the Application Parameter property of the iview.
However, if you need to send dynamic parameters like user-id or something, you have to add and register a service to your existing appintegrator par file.
Kindly follow this URL :
The customer exit of the Application Integrator
Regards,
Nitin

Pass table name as parameter in prepared Statement

Can I pass table name as parameter in prepared Statement
for example
select * from ? where name =?
when i use setString method for passing parameters this method append single colon before and after of this parameter but table name should be send with out colon as SQL Spec.
I have another way to make sql query in programing but i have a case where i have limitation of that thing so please tell me is it possible with prepared Statment SetXXx methods or not ?
Thanks
Haroon Idrees.

haroonob wrote:
I know ? is use for data only my question is this way to pass table name as parameterI assume you mean "how can I do it?" As I have already answered "is this the way?" with no.
Well, I would say (ugly as it is) String concatenation, or stored procedures.

How to Pass a multi-select parameter in BI to a PL/SQL Program

I am trying to pass a BI report parameter which is multi-select enabled in BI Enterprise Stand-Alone reporting tool. eg. it comes out in the data model like this: <P_CLASS_CODE>[DISABLED_VETERAN_OWNED, HUB_ZONE, LARGE_BUSINESS]</P_CLASS_CODE>
to a pl/sql stored procedure. (this is some kind of record set)
This works when passing the parameter as bind variable being passed to and IN CLAUSE. However, In my case I need a little bit more flexibilty with the programming so I need to get the value into PL/SQL so I can work with the individual values in the record set.
I am trying to figure out which collection type or record type I can use in pl/sql to be able to parse out the elements in the collection from within a stored procedure so I can loop through the elements.
I am trying to call the BI before report trigger in the data template like this:
<dataTrigger name="beforeReportTrigger" source="XXAPRPT03_SUPPLIER_DIVERSITY.before_report_trigger(:p_class_code)"/>
this call refers to the default package
I get this error: 'Invalid column type'
what type should I be using in my procedure definition to support the multi-selection record set which my parameter is passing from BI.

Hi,
Okie :) please feel free to post any problem :)
Please apply the patch that has the fix for this issue:
[Patch 9791839|https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=9791839]
The above link worked fine for me .
Ideally, you should pick up the latest patch, which is [ Patch 11846804|https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=11846804]
Click on View Read me for install instructions. Let me know if you find any problem with patch install.
Regards,
Ajay Kumar

How to pass more than one parameter using common...

Hi,
I am using ODP.NET with my 2005 VB
I want to create function from where I can pass more than one parameter to execute SP, or query just like i created for SQL SERVER as below
Public shared Function CreateParameter(ByVal paramname As String, ByVal paramvalue As Object) As DbParameter
Dim param As DbParameter
param = New SqlParameter
param.ParameterName = paramname
param.Value = paramvalue
Return param
End Function
Public Shared Function ExecuteQuery(ByVal sql As String, ByVal commtype As CommandType, ByVal ParamArray parameter As DbParameter())
Dim cmd As DbCommand = New SqlCommand()
cmd.Connection = OpenConnection()
cmd.CommandType = commtype
cmd.CommandText = sql
cmd.Parameters.AddRange(parameter)
Dim RetVal As Integer = cmd.ExecuteNonQuery()
Return RetVal
End Function
specially part is in bold to be converted
I tried like but oracleCommand.parameters doesnt support AddRange
please help me out
Regards

Hello,
I used the following way:
pCommand.CommandText = "Update " + sDataTable + " set "
+ sColumnName + " = :1 ";
pCommand.Parameters.Add("ValueToDb",
this.DefaultDbType,
this.m_Value,
System.Data.ParameterDirection.Input);
Of course, you can add :2,... to your command text, too.
The way back is:
sEndOfTheClause += " RETURNING " + sDataTable + "." + sColName + " INTO :iNewValue";
pCommand.CommandText = ... + sEndOfTheClause;
pCommand.Parameters.Add("iNewValue", this.DefaultDbType,
ParameterDirection.Output);
bool bReturn = (pCommand.ExecuteNonQuery() != 0);
if ((bReturn == true) && (pCommand.Parameters.Count > 0))
this.Value = DataService.Convert<DATA_TYPE>(pCommand.Parameters[0].Value);
....

How to pass more than one parameter

Hello,
This is my code.
How to pass more than one parameter:
SELECT:responsibility_name responsibility_name,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.entry_sequence sequence ,
LPAD(' ', 6*(LEVEL-1))
|| menu.user_menu_name SubMenu_Description ,
LPAD(' ', 6*(LEVEL-1))
|| func.user_function_name Function_Description ,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.prompt prompt
,menu.menu_id ,
func.function_id
--menu_entry.grant_flag Grant_Flag ,
--DECODE( menu_entry.sub_menu_id , NULL, 'FUNCTION' , DECODE( menu_entry.function_id , NULL, 'SUBMENU' , 'BOTH') ) Type
FROM fnd_menu_entries_vl menu_entry ,
fnd_menus_tl menu ,
fnd_form_functions_tl func
WHERE menu_entry.sub_menu_id    = menu.menu_id(+)
AND menu_entry.function_id      = func.function_id(+)
AND MENU.LANGUAGE(+) = 'US'
AND FUNC.LANGUAGE(+) = 'US'
--AND func.user_function_name LIKE '%Primary Care Providers%'
AND grant_flag                  = 'Y'
START WITH menu_entry.menu_id =
(SELECT menu2.menu_id
FROM fnd_menus_tl menu2,apps.fnd_responsibility_vl resp
WHERE menu2.menu_id=resp.menu_id
and resp.responsibility_name= :responsibility_name
--and menu2.user_menu_name = ('ATCO HR INQ USER'
AND LANGUAGE = 'US'
CONNECT BY MENU_ENTRY.MENU_ID = PRIOR MENU_ENTRY.SUB_MENU_ID
   and menu_entry.function_id not in (select func.function_id
                                   from --fnd_form_functions_vl fnc,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                  where func.function_id = exc.action_id
                                  and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
and menu_entry.sub_menu_id not in (select menu.menu_id
                                   from --fnd_menus_vl imn,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                   where menu.menu_id = exc.action_id
                                   and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
ORDER SIBLINGS BY menu_entry.entry_sequence;
Thank you for your help
Shuishenming

Hi, Ming,
One way is to put the "parameters" in a table, and join to that table in your query. If you make it a Global Temporary Table, then multiple sessions can run the query at the same time, and each can be seeing different responsibilities.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Since this problem involves parameters, you should give a couple of different sets of parameters, and the results you want from the same sample data for each set.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Passing Printer as a parameter in the bursting control file

One of our requirements is to print our report on different printers based on the user input. To acheive this, I am passing printer name as one of the parameter in our concurrent process. In the bursting java process, I set the properties as
Properties prop= new Properties();
prop.put("user-variable:PRINTER_NAME","ipp://146.141.12.128/printers/lp1");
dp.setConfig(prop);
dp.process();
In the control file, I am pasing print delivery as :
<xapi:print id="printer1" printer="$(PRINTER_NAME)" copies="1" />
The system throws an error 'java string out of expection' and takes PRINTER_NAME as null in the print delivery. The same thing works perfeclty for E-Mail server if I pass name of the e-mail server in parameter and in the java and control file..I make the following changes:
Properties prop= new Properties();
prop.put("user-variable:SERVER_NAME","cns.wits.ac.za");
dp.setConfig(prop);
dp.process();
<xapi:delivery>
<xapi:email server="$(SERVER_NAME)" port="25"
from="[email protected]" reply-to ="">
<xapi:message id="123" to="${EMAIL}"
Can anybody please help me with this..Has anybody tried passing printer as a parameter in the control file..

Try curly brackets i.e. ${PRINTER_NAME} instead of $(PRINTER_NAME).
Regards
Ashish

How to pass this multi-value parameter via GoURL?

Currency is equal to / is in 'USD', 'GBR', 'RUR'. How to pass such multi-value parameter via GoURL?
P0=1&P1=eq&P2=Measures.Currency&P3=?

Found. P0=1&P1=eq&P2=Measures.Currency&P3=3+USD+GBR+RUR

Is it possible to pass some type of parameter/unique id FROM PDF?

hi there,
I will try to explain this as best as I can but please bear with me.
I have Adobe Acrobat X Pro.
We have drawings linked to each other in pdf.
When you open a drawing (say, a layout of a house), my boss wants to be able to click on say, a door, and have all the information on that door pop up (size, manufacturer, when it was shipped, etc). The information log is stored in Excel. I know how to hyperlink to open an excel file FROM pdf, but cannot figure out how to open a specific sheet in Excel. So here is my question:
1. How do I link to a specific sheet in Excel so it opens when I click on a link in the pdf file?
Having said that, we are going to have around 1500 items and I don't want to have to create 1500 sheets (if that's even possible) to open the details for each one. So here is question #2:
2. Is it possible to pass some type of parameter to excel (or even Access) to know what item was clicked on the pdf file so I can write a macro/code in Excel to just fill in the details for that item? (Hence just needing one sheet instead of 1500?).
Suggestions/path forwards are welcome.
I hope this was clear and I thank you in advance.
Thanks,
Jessica

There really isn't a way to do that. It would be possible to export an Excel sheet to a tab-delimited (or CSV, XML) file which could optionally be attached to the PDF. JavaScript inside the PDF could read the data file and extract the information for an item so it could be displayed somehow.

Reg: passing wdEvent as a parameter .

Hi All,
I have a event handler method in my view. I am calling that method in some other method in the same view based on one condition by passing wdEvent as a parameter bcozz event handler methods have wdEvent as a parameter.
for this I did
com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent1 = null;
wdThis.from_Summary_to_Individual( wdEvent1 );
Can we do like this ? But it is giving error. What could be the reason.
Is it bcozz I set it to null or other reason?
Thanks in advance.

Hi,
Do you really need this parameter wdEvent for you processing?
If not create a custom method and call if from both the places.
You can create this method from the methods tab of the view.
Regards
Ayyapparaj

Can I pass a table function parameter like this?

This works. Notice I am passing the required table function parameter using the declared variable.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(@Date) I ON i.ID = h.ID
WHERE h.SomeDate = @Date
But I guess you can't do this?... because I'm getting an error saying h.SomeDate cannot be bound. Notice in this one, I am attempting to pass in the table function parameter from the SomeTable it is joined to by ID.
DECLARE @Date DATE = '2014-02-21'
SELECT
h.*, i.SomeColumn
FROM SomeTable h
LEFT OUTER JOIN SomeTableFunction(h.SomeDate) I ON i.ID = h.ID
WHERE h.SomeDate = @Date

Hi
NO you cant pass a table function parameter like this?
As When you declare @date assign value to it and pass as a parameter it will return table which you can use for join as you did it in first code
But when you pass date from some other table for generating table from your funtion it doesnt have date as it is not available there
Ref :
http://www.codeproject.com/Articles/167399/Using-Table-Valued-Functions-in-SQL-Server
http://technet.microsoft.com/en-us/library/aa214485(v=sql.80).aspx
http://msdn.microsoft.com/en-us/library/ms186755.aspx
https://www.simple-talk.com/sql/t-sql-programming/sql-server-functions-the-basics/
http://www.sqlteam.com/article/intro-to-user-defined-functions-updated
Mark
as answer if you find it useful
Shridhar J Joshi Thanks a lot

Hoe to pass object as a parameter thru webSerive

I need to pass Object as a parameter to web service:
example:
public calss returnCodes{
int ret_code;
String ret_string;
public retrunCodes(int ret_code, String ret_string){
this.ret_code = ret_code;
this.ret_string = ret_string;
public int getret_code()
return this.ret_code;
public String getret_string {
return this,ret_string
and other repc holder class to hold returnCodes
public class retrunCodesHolder implents javax.xml.rpc.Holder
returnCode value;
pubic returnCodesHolder(){
public returnCodesHolder(returnCodes value) {
this.value = value;
In Webservice I use returnCodesHolder as parameter.
WebService getReturnCodesWs I have
returnCodes retCodes = new returnCodes(04,"Good return code)
returnCodesHolder retholder = new returnCodesHolder(retCodes)
return myString;
When I am calling above webService in servlet I have code:
org.test.mytest.returnCodesHolder retHolder = new org.test.mytest.returnCodesHolder();
String result = port.getReturnCodesWs(retHolder);
How to I access /get values of returnCodes class in my calling servlet?
I am using Tomcat v 6.0

I believe (although have never used, so if I'm wrong,
correct me please!) you can do it with implicit
dynamic cursors, such as:
For rec in 'select col1, col2 from table 1 '||lstr
loop
Not really:
michaels> declare
   lstr   varchar2 (30) := ' where empno = 7788';
begin
   for rec in 'select * from emp e ' || lstr
   loop
      null;
   end loop;
end;
Error at line 1
ORA-06550: line 5, column 4:
PLS-00103: Encountered the symbol "LOOP" when expecting one of the following:
   . ( * @ % & - + / at mod remainder rem .. <an exponent (**)>
   ||

Can a url referencing an Application Process pass more than one parameter?

Hello,
I have a page in an application that uses pl/sql to generate a list of links.
The purpose of each link is to call another pl/sql procedure which in turn opens/runs a report external to the APEX application (either a call to Oralce Application Server generate live or pull clob stored in database). If the URL calls the pl/sql procedure directly I lose session state and no longer know who the user is. To maintain session state the URL references an APPLICATION_PROCESS. I would like to pass a number of parameters, but can only seem to pass one, using javascript to pass the value to a hidden item which is then accessed in the procedure called by the APPLICATION_PROCESS.
Can I pass more than one parameter?
My URL:
https://<server>/pls/apex/f?p=V('APP_ID'):0:V('APP_SESSION'):APPLICATION_PROCESS=MY_PROCESS:NO::P1NAME:P1VALUE
I could pass all the parameters in P1VALUE and using a special character delimiter break it up again in the javascript, but would prefer not to.
Thanks for any help,
Jock

Did you mean something like this?
https://<server>/pls/apex/f?p=V('APP_ID'):0:V('APP_SESSION'):APPLICATION_PROCESS=MY_PROCESS:NO::P1NAME,P2NAME,P3NAME:P1VALUE,P2VALUE,P3VALUE
Best Regards, Kostya Proskudin

Passing parametwers as iView parameter to a Dashboard

Similar Messages

Maybe you are looking for