Passing Table Control to a routine

Hi all
I am writing a routine common to many dynpros. In this routine I have to handle data about a table control, but I don't know how to pass it to a routine .. or better, I don't know how to declare the form:
FORM my_form table_control TYPE ????
ENDFORM.
If is impossible, it should be sufficient to have the COLS table of the table control, but also here cannot understand which type can be used for passing this table as arguments to a form.
does anyone faced this issue ?
thanks for help
regards
Gabriele

Though you have a table control, you will be looping at some itab for that table control. Why dont you pass that itab to the subroutine.
FORM test TABLES p_gt_test.
ENDFORM.
p_gt_test will become the structure that you are actually passing. Hope this helps.

Similar Messages

Passing data to table control in screen exit - IW33 (IWO000018)

Hi Experts,
I am stuck in middle of a screen exit. Request your kind help on this.
Requirement scenario: -
To add an additional tab named "Estimated Costs" in transaction IW31, IW32, IW33. This tab will include a table control with 4 columns: - Operation, operation short text, Estimated cost and Currency. Columns Operation and Operation short text should show all the operations from tab 'Operations' (that can be fetched from table AFVC based on Routing number of operation as fetched from view CAUFV).
Issue: -
Table control has 4 columns, 2 are non-editable,2 are editable. Data in the non-editable fields is passed correctly, whereas in I/O editable fields, entered data is not retained everytime PBO is called. I have modified the internal table in the PAI event.
Pointers in this direction are highly appreciated.
Best Regards,
Shreya
Edited by: shreya tagra on Apr 29, 2010 5:48 AM

I suppose it has to do with the code you have written. Please post a relavant snippet of your flow logic.
regards,
Aabhas

How to pass tables data from SAP script to the routine.

Hi,
I have standard program RPCTEAL0_01 which calls a SAP script form(Custom) to print the form.
Now I have to add some additional functionality to change the values in the form. Since it is custom form I can add ROUTINE and then pass the values to the custom program to modify the variables.
My concern here, I would like to pass the tables like RT,CRT to the custom program via form.
Is this possible? RT and CRT filled by standard progam.
Regarsd
Eswar
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 9:06 AM

Hi, The suggested option is not working.
Actually I am using the below code in SCRIPT
/: PERFORM CAL_2008 IN PROGRAM ZHR_TEST1
/: USING &PER_NO&
/: CHANGING &W12&
/: ENDPERFORM
and calling form in ZHR_TEST1. But this will pass only variables. Now my requirement is to pass tables also.

OpenDocument - Can you pass input controls & other table columns

I need your expertise.....In Webi XI 4.0
I have used The OpenDocument URL to pass prompts as parameters...and that worked perfectly
But now I want to pass input control as well...but now sure if this is possible
and I would like to pass other columns in the table that are not part of my prompts
e.g. I have 3 columns on my table
i.e.
Column name            Country Name     Provice       Number of Cities
Column Data            South Africa        Gauteng           20
                                 South Africa        Mpumalanga    10
                                 South America     xxxxx              2
The Country Name and Province are not part of my prompts....but I want to include them on my OpenDocument URL so that I can limit my data to that particular Country and Province.......
Your help will be highly appreciated
Thank you in advance

As far as I know you cannot pass input controls to the opendoc. and the only way to restrict your child report with additional columns is to include them as filters. As there is no other way your child report would know that it should restrict the report with your column.
Thanks,
karthik

Capture field name in table control on double click

Hi,
How can I capture the field name of internal table passed to table control on double click?
I have set function code as 'PICK' and applied 'Respond to double click' and used GET CURSOR statement. Here I can get the values like row number (line number), field value also. But I would like to capture on which field the cursor is (or on which column the cursor is)?
Thanks in advance.
Regards
Ramesh.

Got it.
We can capture it by using the statement GET CURSOR only.
GET CURSOR field <field xx> .
Here the <field xx> is the field name where we have said double click.

Using Insert and Delete icons in table control wizard.

Can anyone tell me how to perform a new row insertion or deletion in a table created using the table control wizard.
I see there is a form fcode_insert_row and fcode_delete_row, but dont know how to call them and what parameters to pass and all.
Since iam new to SAP-ABAP, some code samples will be a great help.
Thanks to all in advance.

Hi Lavanya ,
You have to add the icons personally in the table control.. . Put fcode for addition button as INSE and delete as DELE ..coding will be already thr in the wizard no need to anything just add icons in the table control by selecting from f4 help on icons option of screen.
Thanks,
Vishnu .

Search help (PREM) for personal no. is not coming in ALV grid table control

hi experts,
Search help (PREM) for personal no. is not coming in ALV grid table control.
i have assigned the srch help (prem) to my 'ZFIEXP_PROJALLOC' table for the emp_id.
but in output it is now showing the help.
ls_fcat-fieldname = 'EMPLOYEE CODE'.
ls_fcat-ref_table = 'ZFIEXP_PROJALLOC'.
ls_fcat-ref_field = 'EMP_ID'.
ls_fcat-outputlen = '10'.
ls_fcat-key = 'X'.
ls_fcat-edit = 'X'.
ls_fcat-coltext = 'EMPLOYEE CODE'.
ls_fcat-seltext = 'EMPLOYEE CODE'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Then i tried to solve it using the PA0002 . ie.,
ls_fcat-fieldname = 'EMPLOYEE CODE'.
ls_fcat-ref_table = 'PA0002'.
ls_fcat-ref_field = 'PERNR'.
ls_fcat-outputlen = '10'.
ls_fcat-key = 'X'.
ls_fcat-edit = 'X'.
ls_fcat-coltext = 'EMPLOYEE CODE'.
ls_fcat-seltext = 'EMPLOYEE CODE'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
with this it is showing the help in employee code, but, when i click on an empl number, it is not added to my table control and allowing me to add the number by typing them.
plz help me.
thanks.

Hi
In the layout give layout-sel_mode = 'A'. and
pass 'A' to i_save exporting parameter to method set_table_for_first_display.
The same thing if you are working with function module
reuse_alv_grid_display.
Reward points for useful answer.
Venkat

BDC table control using Excel sheet upload

Hi All,
I am working BDC table control.I want to upload the From excel sheet.I am using the FM ALSM_EXCEL_TO_INTERNAL_TABLE to upload the the data into my internal table.The data is populating in the internal table.
Now i have problem tat how to populate this excel sheet data to the Bdc table control.
Can nybody help me out.\[removed by moderator\]
Thanks,
Swapna.
Edited by: Jan Stallkamp on Jul 25, 2008 10:57 AM

after fetching data from EXCEL sheet, each column data (in excel sheet) will be uploaded to individual record into your internal table along with row number and column number, loop through that internal table and collect all your excel data into record format.pls refer the below code.
data:
 i_excel type alsmex_tabline occurs 0 with header line,
 l_row type i value 1.
data:
 begin of x_data occurs 0,
 kunnr like RF02L-KUNNR,
 klimk(17) type c,
 CTLPC like knkk-CTLPC,
 end of x_data,
 begin of x_data1 occurs 0,
 data(106),
 end of x_data1.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 exporting
 filename = p_fname
 i_begin_col = 1
 i_begin_row = 1
 i_end_col = no.of columns in your excel file
 i_end_row = no.of rows in your file
 tables
 intern = i_excel.
if sy-subrc = 0.
 loop at i_excel.
 if l_row <> i_excel-row.
 append x_data.
 clear x_data.
 endif.
 case i_excel-col.
 when 1.
 x_data-kunnr = i_excel-value.
 when 2.
 x_data-klimk = i_excel-value.
 when 3.
 x_data-CTLPC = i_excel-value.
 endcase.
 l_row = i_excel-row.
 clear i_excel.
 at last.
 append x_data.
 endat.
 endloop.
endif.
then loop through the internal table X_DATA, pass the data to your table control like.
tbl_control-field1(1) = x_data-field1.
tbl_control-field2(1) = x_data-field2.
tbl_control-fieldn(1) = x_data-fieldn.
Regards,
Sreeram.

Get all rows from a table control

Hi All,
I have a table control with one column. What function should I use to retrieve all the rows ? Do I need to iterate row by row and read each row or is it possible to do it in one function ?
Thanks,
Kanu
Solved!
Go to Solution.

Supposing vells in the column have all the same data type, you can retrieve the whole column with a single instruction:
GetTableCellRangeVals (panel, control, VAL_TABLE_COLUMN_RANGE (1), array, VAL_COLUMN_MAJOR);
The array passed must be large enough to retrieve all data. Alternatively, you may substitute the macro VAL_TABLE_COLUMN_RANGE with the appropriate MakeRect instruction.In case your table was dinamically built, you can obtain the nu,ìmber of rows using GetNumTableRows and dimension your array accordingly.
The above macro is defined in userint.h together with some other useful macros that can be used to access data in a table.
There are some precautions to take in case of string values or some cell type (ring, combo box, button...) that are described in the hell for the function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to delete record from table control in BDC?

Hello friends,
I am running a BDC program to delete records.
I have file with following records and i got these records into t_itab.
Material     Plant     Start date     End date     Cost
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100004     S002     09/01/2008     09/31/2008     56.00
MQ100008     S003     09/01/2008     09/31/2008     57.00
Now, I have BDC transaction in which table control screen which contains following structure.
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100002     S002     09/01/2008     09/31/2008     56.00
MQ100004     S003     09/01/2008     09/31/2008     47.00
MQ100005     S004     09/01/2008     09/31/2008     25.00
MQ100006     S012     09/01/2008     09/31/2008     76.00
MQ100007     S033     09/01/2008     09/31/2008     17.00
MQ100008     S011     09/01/2008     09/31/2008     95.00
MQ100009     S002     09/01/2008     09/31/2008     46.00
I have recorded from SHDB in which first record will be delete.
So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
Which i don't want to.
Is there any facility in BDC to put records on top which i want to delete?
Please guide me.
Regards,
RH

Hi,
While doing recording check for Filter button available for the table control, if it available then do the recording for the same.
Once it is done while passing the data from internal table put the value into Filter field.
Hope it resolves your issue.
Thanks & Regards.
Nagaraj Kalbavi

How to execute multiple records in table control

HI.
I have a requirement that in table control user will select more than one row and when he clicks 'SAVE' it should go and sit in a custom table. how to pass more than one records.
thanks & regards.
sandeep

Hi Sandeep,
I understand your requirement .......
See this standard program........
" DEMO_DYNPRO_TABCONT_LOOP_AT "
Understand how DELETE button is working,inorder to delete multiple lines....Copy this program if necessary..OK.
Simply,Replace DELETE statement with your INSERT statement to push records into your custom table....very easily you can do it.
Reward all helpful answers.
Hope you problem is solved.
Regards,
V.Raghavender.

How to deactivate the fields in a table control of a standard screen

Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.

>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

Unable to delete a row in table control

Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkar

hi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
    WHEN 'DELETE'.
      PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
    DELETE int_factor WHERE chk = 'X' .
    CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s

In Table Control How to get only a single row .

Hi
In Table Control How to get only a single row .I am able to decrease it its height to 4 but then 2 rows is getting dsplayed .I want only one row to be display and 2nd row should be deactivated or not visible.
regards
Avik
Edited by: Julius Bussche on Jan 30, 2009 1:10 PM
Removed friendly greeting from the subject title

Hi Avik
use this code it will help you.
MODULE passdata OUTPUT.
READ TABLE it_revision INTO wa_rev INDEX tab_clc-current_line.
IF sy-subrc = 0.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.      " 111 IS THE GROUP NAME
        screen-input = 1.          " input mode
        screen-active = 1.         " input mode.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.       "GROUP NAME
        screen-input = 0.           " display mode
        screen-active = 1.          " DISPLAY MODE.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " PASSDATA OUTPUT
Make sure in group tou are passing the field name that you want in input mode on the base of other field
Hope it will help you.
Thanks
Arun Kayal.

Passing Table Control to a routine

Similar Messages

Maybe you are looking for