Passivation Error with 9.0.3 Release
I am getting a passivation error with the new 9.0.3 Release Jdeveloper. I have a page-by-page iteration set up and am selecting out of a table that has 9000 rows in it. When I first query the table I do not have any problems, but when I go towards the end I start throwing passivation errors. I run the following chunk of code:
DcAddressView dav = (DcAddressView)this.getDcAddressView1();
dav.setWhereClause(whereClause);
dav.setRangeSize(pageSize);
dav.setRangeStart(startPos);
Row[] rows = dav.getAllRowsInRange();
where whereClause = "1 = 1 and source_ind = '9'"; pageSize = 20; startPos = 5900
With the whereClause used there is 5948 records in the recordset. When I debug this section of code I throw an exception as I try to setRangeStart(5900) as follows:
oracle.jbo.PCollException: JBO-28020: Passivation error on collection DcAddressView1, collection id 0, persistent id 1
void oracle.jbo.PCollException.throwException(java.lang.Class, java.lang.String, java.lang.Object[], java.lang.Exception)
PCollException.java:39
boolean oracle.jbo.pcoll.PCollNode.passivateElem(oracle.jbo.pcoll.PCollPersistable, oracle.jbo.pcoll.PCollNode, oracle.jbo.pcoll.PCollection, long)
PCollNode.java:589
boolean oracle.jbo.pcoll.PCollNode.passivate()
PCollNode.java:658
boolean oracle.jbo.pcoll.PCollection.passivateLRULeafNode()
PCollection.java:351
void oracle.jbo.pcoll.PCollection.checkActiveLeafLimit()
PCollection.java:404
void oracle.jbo.pcoll.PCollection.nodeRecentlyUsed(oracle.jbo.pcoll.PCollNode)
PCollection.java:252
void oracle.jbo.pcoll.PCollNode.<init>(oracle.jbo.pcoll.PCollection, oracle.jbo.pcoll.PCollNode, boolean)
PCollNode.java:74
oracle.jbo.pcoll.PCollNode oracle.jbo.pcoll.PCollNode.checkForSplit()
PCollNode.java:1554
void oracle.jbo.pcoll.PCollNode.addObject(oracle.jbo.pcoll.PCollPersistable)
PCollNode.java:1623
void oracle.jbo.pcoll.PCollNode.addObject(oracle.jbo.pcoll.PCollPersistable)
PCollNode.java:1611
void oracle.jbo.pcoll.PCollection.addElement(oracle.jbo.pcoll.PCollPersistable)
PCollection.java:753
boolean oracle.jbo.server.QueryCollection.fetch(int)
QueryCollection.java:1295
java.lang.Object oracle.jbo.server.QueryCollection.get(int)
QueryCollection.java:831
oracle.jbo.Row oracle.jbo.server.ViewRowSetImpl.getRow(int)
ViewRowSetImpl.java:2619
int oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(int)
ViewRowSetIteratorImpl.java:945
int oracle.jbo.server.ViewRowSetIteratorImpl.setRangeStart(int)
ViewRowSetIteratorImpl.java:2161
int oracle.jbo.server.ViewRowSetImpl.setRangeStart(int)
ViewRowSetImpl.java:1726
int oracle.jbo.server.ViewObjectImpl.setRangeStart(int)
ViewObjectImpl.java:4718
org.act.dcact.PageList org.act.dcact.bc.AddressModuleImpl.getAddressList(int, int, java.lang.String)
AddressModuleImpl.java:84
org.apache.struts.action.ActionForward org.act.dcact.SearchAction.execute(org.apache.struts.action.ActionMapping, org.apache.struts.action.ActionForm, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
SearchAction.java:42
org.apache.struts.action.ActionForward org.apache.struts.action.RequestProcessor.processActionPerform(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, org.apache.struts.action.Action, org.apache.struts.action.ActionForm, org.apache.struts.action.ActionMapping)
RequestProcessor.java:446
void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
RequestProcessor.java:266
void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:1292
void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:492
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
HttpServlet.java:740
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpServlet.java:853
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
ServletRequestDispatcher.java:721
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
ServletRequestDispatcher.java:306
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:767
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:259
void com.evermind.server.http.HttpRequestHandler.run()
HttpRequestHandler.java:106
void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
PooledExecutor.java:803
void java.lang.Thread.run()
Thread.java:484
## Detail 0 ##
java.lang.ClassCastException: java.sql.Date
boolean oracle.jbo.pcoll.OraclePersistManager.holdTableName(java.lang.String, boolean)
OraclePersistManager.java:1096
void oracle.jbo.pcoll.PCollManager.resolveName()
PCollManager.java:324
void oracle.jbo.pcoll.OraclePersistManager.createControlTable()
OraclePersistManager.java:268
void oracle.jbo.pcoll.OraclePersistManager.createTable()
OraclePersistManager.java:672
void oracle.jbo.pcoll.OraclePersistManager.insert(long, long, int, oracle.jbo.pcoll.PCollKeyInfo[], byte[])
OraclePersistManager.java:1538
boolean oracle.jbo.pcoll.PCollNode.passivateElem(oracle.jbo.pcoll.PCollPersistable, oracle.jbo.pcoll.PCollNode, oracle.jbo.pcoll.PCollection, long)
PCollNode.java:543
boolean oracle.jbo.pcoll.PCollNode.passivate()
PCollNode.java:658
boolean oracle.jbo.pcoll.PCollection.passivateLRULeafNode()
PCollection.java:351
void oracle.jbo.pcoll.PCollection.checkActiveLeafLimit()
PCollection.java:404
void oracle.jbo.pcoll.PCollection.nodeRecentlyUsed(oracle.jbo.pcoll.PCollNode)
PCollection.java:252
void oracle.jbo.pcoll.PCollNode.<init>(oracle.jbo.pcoll.PCollection, oracle.jbo.pcoll.PCollNode, boolean)
PCollNode.java:74
oracle.jbo.pcoll.PCollNode oracle.jbo.pcoll.PCollNode.checkForSplit()
PCollNode.java:1554
void oracle.jbo.pcoll.PCollNode.addObject(oracle.jbo.pcoll.PCollPersistable)
PCollNode.java:1623
void oracle.jbo.pcoll.PCollNode.addObject(oracle.jbo.pcoll.PCollPersistable)
PCollNode.java:1611
void oracle.jbo.pcoll.PCollection.addElement(oracle.jbo.pcoll.PCollPersistable)
PCollection.java:753
boolean oracle.jbo.server.QueryCollection.fetch(int)
QueryCollection.java:1295
java.lang.Object oracle.jbo.server.QueryCollection.get(int)
QueryCollection.java:831
oracle.jbo.Row oracle.jbo.server.ViewRowSetImpl.getRow(int)
ViewRowSetImpl.java:2619
int oracle.jbo.server.ViewRowSetIteratorImpl.scrollRange(int)
ViewRowSetIteratorImpl.java:945
int oracle.jbo.server.ViewRowSetIteratorImpl.setRangeStart(int)
ViewRowSetIteratorImpl.java:2161
int oracle.jbo.server.ViewRowSetImpl.setRangeStart(int)
ViewRowSetImpl.java:1726
int oracle.jbo.server.ViewObjectImpl.setRangeStart(int)
ViewObjectImpl.java:4718
org.act.dcact.PageList org.act.dcact.bc.AddressModuleImpl.getAddressList(int, int, java.lang.String)
AddressModuleImpl.java:84
org.apache.struts.action.ActionForward org.act.dcact.SearchAction.execute(org.apache.struts.action.ActionMapping, org.apache.struts.action.ActionForm, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
SearchAction.java:42
org.apache.struts.action.ActionForward org.apache.struts.action.RequestProcessor.processActionPerform(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, org.apache.struts.action.Action, org.apache.struts.action.ActionForm, org.apache.struts.action.ActionMapping)
RequestProcessor.java:446
void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
RequestProcessor.java:266
void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:1292
void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
ActionServlet.java:492
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
HttpServlet.java:740
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpServlet.java:853
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
ServletRequestDispatcher.java:721
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
ServletRequestDispatcher.java:306
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:767
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:259
void com.evermind.server.http.HttpRequestHandler.run()
HttpRequestHandler.java:106
void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
PooledExecutor.java:803
void java.lang.Thread.run()
Thread.java:484
Any help would be appreciated. BTW-- I have repeatedly deleted all bc4j tables from my database.
Eric,
We're tracking this problem as Bug#2646690. Thanks for reporting it.
The problem is related to a change in the JDBC driver when the oracle.jdbc.J2EE13Compliant Java system property is set to the value true. When this flag is set to true, JDBC returns a DATE column from the database as a java.sql.Date object. When the flag is not set or set to false, it returns the java.sql.Timestamp type that it has always returned before.
The workaround until we are able to fix this on our side to work with either Timestamp or Date in our code, is to add the line:
System.setProperty("oracle.jdbc.J2EE13Compliant","false");Into the constructor of your root application module's *Impl.java class.
Similar Messages
-
Stack overflow error with production release
Hi,
I am using Flex 4.5.1 and I am getting a weird error upon exporting a production release. Here is the stack trace:
VerifyError: Error #1023: Stack overflow occurred.
at spark.components.gridClasses::GridLayout/intializeGridVisualElement()
at spark.components.gridClasses::GridLayout/layoutIndicator()
at spark.components.gridClasses::GridLayout/layoutCaretIndicator()
at spark.components.gridClasses::GridLayout/updateDisplayList()
at spark.components.supportClasses::GroupBase/updateDisplayList()
at spark.components::Group/updateDisplayList()
at spark.components::Grid/updateDisplayList()
at mx.core::UIComponent/validateDisplayList()
at spark.components::Group/validateDisplayList()
at mx.managers::LayoutManager/validateDisplayList()
at mx.managers::LayoutManager/doPhasedInstantiation()
at mx.managers::LayoutManager/doPhasedInstantiationCallback()
As you can see there is no trace of our own classes anywhere. I don't get this error if I use the normal debug version. We are very close to going live and we can't use the debug version files as they are bulky and are increasing the initial load time of the application.
Please help!
Thanks.
ManojHey I get this suddenly in an app that's been running and working fine. We just updated with a release build for some other updates and I get this error. Here's the context:
I am using Flex 4.6, have a component that extends the Flex 3 AdvancedDataGrid for some lightweight customization of how column resising work. The component is used in several of our apps. But, for some reason, and with no code updates to this particular component in a while, when I click on a row in the grid, I get this stack overflow exception too. The exact same stack trace as the one mentioned by the original poster.
Anyone have a clue why I would be seeing "spark.components.gridClasses::..." in my stack trace to begin with when the component that is being clicked on is a Flex 3 AdvDataGrid component? I've seen some mention of the compiler error that somehow bashes the stack under the perfect circumstances. But, in our case, we've eliminated all of our own event handlers (click/etc) from the grid and we still get this error and only in the release build. So, there's no way to change any of our code to fix it b/c none of our code is executing when the error occurs.
This is very very odd stuff. Any ideas??? -
Hi all,
Apologies if this is the second time round; first time didn't appear to post.
I'm trying to get a BC4J app working. I'm using a brand-spankin' new 9.0.2.822 JDeveloper connecting to a less-than-new 8.1.7 database.
To test, I'm just trying to browse / query a small table, Languages, which contains the ISO codes for various languages. I did the following:
- created a new workspace
- created a new project with business components
- created a new business web application
- selected LANGUAGES from the table menu
and a horde of jsp and whatnot pages were created. I then attempt to "run main.html" and get mozilla to pop open
a browser that says "This is a Business Components JSP Application." Yay! I then click on the left under Languages for either Browse or Query, and get the following stack track. I have never seen this work in a browser, and the table itself is small, so I don't think this is hte row issue I saw elsewhere on the forum. Furthermore, I am seeing the PCOLL_CONTROL table, but not the PS_TXN table in the database.
Any ideas?
-e
Application Error
Return
Error Message: JBO-28020: Passivation error on collection TXN, collection id 262, persistent id -1
Error Message: JBO-28030: Could not insert row into table PS_TXN, collection id 262, persistent id -1
oracle.jbo.PCollException: JBO-28020: Passivation error on collection TXN, collection id 262, persistent id -1
at oracle.jbo.PCollException.throwException(PCollException.java:25)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:583)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:668)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:611)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:422)
at oracle.jbo.server.DBSerializer.reservePassivationId(DBSerializer.java:181)
at oracle.jbo.server.ApplicationModuleImpl.reservePassivationId(ApplicationModuleImpl.java:3597)
at oracle.jbo.common.ampool.SessionCookieImpl.reservePassivationId(SessionCookieImpl.java:497)
at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:224)
at LanguagesTlView_Browse._jspService(LanguagesTlView_Browse.jsp:10)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:684)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
## Detail 0 ##
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 262, persistent id -1
at oracle.jbo.PCollException.throwException(PCollException.java:25)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1482)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:537)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:668)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:611)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:422)
at oracle.jbo.server.DBSerializer.reservePassivationId(DBSerializer.java:181)
at oracle.jbo.server.ApplicationModuleImpl.reservePassivationId(ApplicationModuleImpl.java:3597)
at oracle.jbo.common.ampool.SessionCookieImpl.reservePassivationId(SessionCookieImpl.java:497)
at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:224)
at LanguagesTlView_Browse._jspService(LanguagesTlView_Browse.jsp:10)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:684)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
## Detail 0 ##
java.sql.SQLException: ORA-06550: line 1, column 19:
PLS-00201: identifier 'PS_TXN' must be declared
ORA-06550: line 1, column 7:
PL/SQL: SQL Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:185)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1476)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:887)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1959)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1879)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2489)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:435)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:500)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1464)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:537)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:668)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:611)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:422)
at oracle.jbo.server.DBSerializer.reservePassivationId(DBSerializer.java:181)
at oracle.jbo.server.ApplicationModuleImpl.reservePassivationId(ApplicationModuleImpl.java:3597)
at oracle.jbo.common.ampool.SessionCookieImpl.reservePassivationId(SessionCookieImpl.java:497)
at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:224)
at LanguagesTlView_Browse._jspService(LanguagesTlView_Browse.jsp:10)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:684)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)Ah, excellent, this is quite helpful.
Now, it looks to me that the problem is quite simple: whatever BC4J is doing, it is NOT creating the PS_TXN table (or the PS_TXN_SEQ sequence). Line 160 down there clearly shows PCOLL_CONTROL table being created, but the PS_TXN table isn't.
Is there some way to kick-start its creation? Or can somebody ship me the schema and I'll just enter it by hand?
Cheers,
-e
Here's the trailing output:
[149] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[150] Creating a new pool resource
[151] Trying connection/2: url='jdbc:oracle:thin:@d01.consys.prognet.com:1637:cdd01' info='{user=cds, password=cds}' ...
[152] Successfully logged in
[153] JDBCDriverVersion: 9.0.1.2.0
[154] DatabaseProductName: Oracle
[155] DatabaseProductVersion: Oracle8i Enterprise Edition Release 8.1.6.1.0 - 64bit Production With the Partitioning option JServer Release 8.1.6.1.0 - 64bit Production
[156] Getting a connection for internal use...
[157] Creating internal connection...
[158] Creating a new pool resource
[159] Trying connection/2: url='jdbc:oracle:thin:@d01.consys.prognet.com:1637:cdd01' info='{user=<snip>, password=<snip>, dll=ocijdbc9, protocol=thin}' ...
[160] **createControlTable** tabname=PCOLL_CONTROL created
[161] **PCollManager.resolveName** tabName=PS_TXN
[162] **commit** #pending ops=0
[163] **insert** id=-1, parid=0, collid=361, keyArr.len=-1, cont.len=571
[164] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[165] **insert** error, sqlStmt=begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[166] java.sql.SQLException: ORA-06550: line 1, column 19:
PLS-00201: identifier 'PS_TXN' must be declared
ORA-06550: line 1, column 7:
PL/SQL: SQL Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:185)8��nq -
While releasing a PO an error showing PO cannot be released
While checking the PO release an error showing PO cannot be released is showing.The release button is not appearing from the first code itself
Hi,
The following are the various reasons for the errormessgae.
1. PO would have already released.
2. PO would not have come under the perview of release u defined
3.You would not have authorization for release M_EINK_FRG object.
4.The charetarestcs defined will not come for this PO properties.
ETc.
Mostly , if all the config is setand done and working fine for other POs tooo then this PO iswith the problem.
Do you have this problem for other POs too with the same kind of PO?
Regards, -
Error Message: JBO-28020: Passivation error on collection TXN, node id -1
Hi all!
I've got this error when I try to run my BC4J Application:
Error Message: JBO-28020: Passivation error on collection TXN, node id -1
Error Message: JBO-28030: Could not insert row into table PCST_TXN, id -1
on this env:
SUN SOLARIS 2.7
OC4J DEV Preview (9.0.2.0.0A)
DB 9i + patchset 9.0.2
The SAME APPLICATION works right when deployed on this env:
W2k
OC4J part of JDEV9iRC2 (9.0.2.0.0)
remote DB 9i + patchset 9.0.2 on SUN SOLARIS
The Application Module is deployed as a Session Bean (BMT),
and I have a jdbc Datasource called jdbc/DeployDBDS.
I have also modified jbo.ejb.txntype from "global" to "local"
because with "global" it doesn't work...
Anyone can help me?
regards
FelixFirst you'll want to read this BC4J "HowTo" article on how our persistent collection functionality works so you can decide whether you not you really want to be using it.
http://otn.oracle.com/products/jdev/htdocs/bc4j/bc4j_temp_tables.html
Likely you don't want to be, so this article explains how to avoid having its being used. It's typically a "last resort" feature that saves appserver memory by writing extra query results rows out to persistent storage if you query thousands of rows into memory and start scrolling around.
Down in your stack trace there is the error:
ORA-600: [19942]
This is a database internal error related to handling CLOB's and BLOB's. I see a few bugs that were reported in versions 8.0.5 but fixed in 8.1.6.
What version of the Oracle database are you using? -
Error while assigning user for release approval path for payment release
Hi everyone,
I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
The data in details below;
1. Create Workflow Variant for Release for Payment
1000 SAP
2. Assign Company Code Workflow Variant for Release for Payment
1000 1000 SAP
3. Define Release Approval Groups for Release for Payment
0001 Vendor A
0002 vendor B
0003 Vendor C
0004 G/L accounts
4. Define Release Approval Paths for Release for Payment
0001 Vendor high
0002 Vendor middle
0003 Vendor low
0004 G/L accounts
0005 Other
5. Assign Release Approval Paths for Release for Payment
1000 KZ 0001 0001
1000 KZ 0002 0002
1000 KZ 0003 0003
6. Assign Release Approval Procedure for Release for Payment
1000 0001 20,000.00 KES 1 WS10000052 WS00400011
1000 0002 50,000.00 KES 2 WS10000052 WS00400021
1000 0003 1,000,000.00 KES 3 WS10000052 WS00400022
7. Define Relevant Document Types for Release for Payment
1000 KR
1000 KZ
8. Define Users with Authorization to Payment Release
1000 0001 1 20,000.00 KES
1000 0001 2 50,000.00 KES
1000 0001 3 100,000.00 KES
here i have selected the option and tried to create Orgobject, i am getting following error
Program error: ASSIGN with length 0 in program "MP120800"
If any corrections in the definitions, Please let me know.
Thanks in advance!!Hello,
Please start the report RSWOGIND, set also the checkbox "generate all
ObjTypes from new". This should solve the problem.
Best regards, Hana -
[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?
I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in! -
Valuation with material cost estimate: error with product "117122"
Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
. Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
. Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
. Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana. -
Valuation with material cost estimate: error with product " 200038 "
Hi,
I am getting an error:
Valuation with material cost estimate: error with product " 200038 " (Message KE350).
Kindly assist on the same?If this material is mto material go to t.code KE40 and maintain define access to standard cost estimate define cost key with
"Transfer sales orde cost estimatex".
If it is mts material define costing key with Transfer std cost estimate and in costing data
costing variant : ppc1
costing verstion: 1
period indicator: Release std cost estimate matching with goods issue or material costing matching posting date.
This will resolve ur problem. -
Problem with file descriptors not released by JMF
Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects. -
RUNTIME Error - User Status for Order release
HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors MESSAGE_TYPE_X
Date and Time 31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID l_excp->t100_msg-msgid
11
TYPE 'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD. "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64
SWW_WI_CREATE_VIA_EVENT
8 FORM SAPLSWW_SRV LSWW_SRVU11 1
SWW_WI_CREATE_VIA_EVENT
7 FORM SAPMSSY1 SAPMSSY1 271
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 115
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 386
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCU02 1
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 26 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 25 Ty. METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 24 Ty. METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store = 0xE06D6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 224 (0xE0000000)
label = 758 (0xF6020000)
fill = 1 (0x01000000)
leng = 570 (0x3A020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000046
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x80095FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 540 (0x1C020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store = 0x106F6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 225 (0xE1000000)
label = 760 (0xF8020000)
fill = 9 (0x09000000)
leng = 510 (0xFE010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000045
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x402D5FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 541 (0x1D020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No. 23 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store = 0x806B6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 207 (0xCF000000)
label = 752 (0xF0020000)
fill = 1 (0x01000000)
leng = 28 (0x1C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000022
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0696DEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 537 (0x19020000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No. 22 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 21 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store = 0x90CE53EFF9060000
ext1 = 0xB04D6BEFF9060000
shmId = 0 (0x00000000)
id = 112 (0x70000000)
label = 279 (0x17010000)
fill = 30 (0x1E000000)
leng = 152 (0x98000000)
loop = 400 (0x90010000)
xtyp = TYPE#000009
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C453EFF9060000
pgHook = 0xF0CE53EFF9060000
idxPtr = 0x50E253EFF9060000
shmTabhSet = 0x0000000000000000
id = 207 (0xCF000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x204C6BEFF9060000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR 01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No. 20 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>Hello,
Get help from your abaper on this.
Vinay -
RFC error with SAPOSS (test connection)
Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client :001
User :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
Connection test SAPOSS
Connection type: R/3 connection
Connection error Error opening an RFC connection.
ERROR partner not reached (host 209.94.207.139, service sapdp99)
LOCATION SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL NiPConnect
CALL connect
COMPONENT NI (network interface)
COUNTER 9
ERROR TEXT Network is unreachable
ERROR NUMBER 101
MODULE nixxi.cpp
LINE 8628
RETURN CODE -10
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:06:05 2008
VERSION 37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
PratyushaHi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION SAProuter 37.11 on rgcwebsrv
COMPONENT NI (network interface)
COUNTER 5580
MODULE
LINE
RETURN CODE -94
SUBRC 0
RELEASE 640
TIME Wed Jul 30 10:41:28 2008
VERSION 37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha -
Error with adautocfg.sh on the DB during final stage of upgrade
Hi ;
I have same issue like:
Error with adautocfg.sh on the DB during final stage of upgrade
i folled documents but somehow i cant recreate xml file
i use this:
cd <RDBMS ORACLE_HOME/appsutil/bin
perl adbldxml.pl
but nothing happen!! it doesnt do nothing!
i rename my xml file under <RDBMS ORACLE_HOME/appsutil/ but there is no new xml file!!
Is anyone know why?
ThanksHi hussein;
Those note solved my problem, but i have one other problem now.. when i try to create new context file by usng :
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
i have this error:
FOLLOWING ERROR OCCURED :
+3 >= 3+
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
Upgrade to DB 10g fails with error - cannot generate contextfile
i found note 369179.1, Note says i need to apply lastest autoconfig patch...
When i donwload patch 6372396 which is lasest patch number for r11( i sourced r11 env file), and try to apply patch to my system its gives me that:
AutoPatch error:
adprdf(): At line 3 in file u6372396.drv:
This patch is not compatible with your on-site release:
patch's intended release version and
on-site release version
do not have identical major and minor version numbers (first two components)
patch's intended release is "11.5.0"
on-site release is "12.0.4"
Processing line 10000.
Processing line 20000.
+24658 lines processed.+
AutoPatch error:
AutoPatch encountered errors parsing and loading the patch driver file.
+STRT_TASK: [Prereq checking logic] [] [Sun Jun 28 2009 09:04:57]+
So i decide to apply autoconfig patch 7237313 for r12, so i source r12 env file and then start path end its ended wihtout error
After i try to create context file by using this command again:
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
and have still same error :(
FOLLOWING ERROR OCCURED :
3 >= 3
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
so now what i have to do?
thanks for advice -
My iPhone 4 will not sync since upgrading to latest software release. I keep getting the error message "required file cannot be found". I've tried restoring several times with no success. I am using a MacPro notebook with the latest software release.
My iPhone 4 will not sync since upgrading to latest software release. I keep getting the error message "required file cannot be found". I've tried restoring several times with no success. I am using a MacPro notebook with the latest software release.
-
PASSIVATION ERROR ...
hi !
i obtained this error message :
Error Message: JBO-28020: Passivation error on collection SEMListeCritereVO, collection id 3, persistent id 9
Error Message: JBO-28006: Could not create persistence table PS_SEM1SuiviMarcheAM
void com.evermind.util.ThreadPoolThread.run()
## Detail 0 ##
java.sql.SQLException: ORA-00955: name is already used by an existing object
so i did a "desc PS_SEM1SuiviMarcheAM" with SQLPLUS and i have the message "Objet inexistant"
when i look in the system table "ALL_TABLES", i find a line corresponding to the table "PS_SEM1SuiviMarcheAM" !!!
i don t understand the origin of this table and why it remains in the table "ALL_TABLES" and how we can rectify this passivation error ????
THANKS FOR HELP !
Cordialy
PierrotThese two article contain info on our spill-to-disk functionality:
http://radio.weblogs.com/0118231/stories/2003/03/26/viewObjectTuningTipsForBestPerformance.html
http://otn.oracle.com/products/jdev/htdocs/bc4j/bc4j_temp_tables.html
Also, when a table name contains lower-case letters, to perform a DESC (describe) command, you need to quote it in double quotes like:
DESC "MyTableName"
Maybe you are looking for
-
How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?
-
Need help on jsp:useBean
My JSP code that calls the bean is as follows: <%@ page import ="java.sql.*" %> <%! String loginId, logPassword; %> <% loginId=request.getParameter("LoginId"); logPassword=request.getParameter ("LogPassword");%> <jsp:useBean id="simpleCon" scope
-
Function Module to identify Where-Used list
Hi All, Is any one aware of any Function Module(s) to identify where-used list of any given Info Object(s). I would like to use this in an ABAP Report. I do not want to use RSD1/metadata repository way. I was thinking of a way to write multiple selec
-
will microsoft office for mac 2004 transfer from my emac running 10.4.11 to the new iMac running mountain lion using migration assistant?
-
Can't open browser window from RoboHelp AIR app??!
We've got a RoboHelp course that we're exporting as an AIR app using the Packager and it works great. We've got an embedded flash file that needs to open a website in a browser window, but, currently it will only load the site in a new AIR window.