Password protected remote panel empty after login and connecting

Dear Ladies and Gentleman
We like to access our front panel by web (to be able to see what is happening) which works fine. We need also password protection in order to assure only some people have access. For this case we installed LabView 2009 SP1 32bit together with the Internet Toolkit. After following How to Setup Security for the G Server? we are forced to enter a password when opening the URL in firefox. If the correct password is entered the web site opens BUT the plugin which is needed to open/show the embedded LabView panel applet does not work!! There is a grey box indicating that something is actually going on, but nothing appears...
If we do not use password protection (i.e. G Server but the default LabView Server) everything works fine.
We are using an evaluation version of the Internet Toolkit but if this issue can be solved we would like to buy it.
Thanks a lot for your help and time
Greetings
Ursin Solèr
(ETH Zürich)

Hello Joseph
Thanks for your reply - actually I remember to have read the document you mentioned. I read the note also... but I have to admit that I did not understand what's the point;
- I do not want to 'Import' something but to 'share' / 'publish' / ...
- I do not understand what a Web Services are and what I do they need for
- I do NOT have any CGI code (just a simple VI)
- I JUST WANT TO PROTECT A WORKING REMOTE VI WITH A PASSWORD (e.g. instead of showing the VI to me, ask first for a password and THEN show it)
Sorry but as I can see this should be easy since it should be a quite common task, doesn't it? In early LV versions (before v8 or may be v6) this was simple and
described in several documents:
- http://digital.ni.com/public.nsf/allkb/8D8A18E0348920A48625703B00789A41
- http://digital.ni.com/public.nsf/allkb/427FE409FB11575686256DFF0008BBE4
PLEASE HELP ME! In about 1 week the evaluation period of the Internet Toolkit is over... Do I really have to write my own code for this? Is there no simple
built-in solution?
Greetings

Similar Messages

I am trying to run page 192.168.0.170 for my IP Cameras but after login and password the page is not responding. Plz help!

I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

Menu tabs disappear completely after login and appears if only i press on item node at hire level

I'm using a Menu Model to Create a Page Hierarchy in my adf application on Jdeveloper 11.1.2.3.0
it is in three levels level 1 have 2 item nods (home - Help) displayed as buttons
                            level 2   contains 5 item nods about the managements displayed as tabs
                            level 3   is about reports displayed as list
the point I have apply security in the application using Adf security wizard and i assign roles and users and grants
all works fine but level 2 tabs disappear completely after login and appears if only i press on Home item node at run time
I create 2 users (admin) has all roles and can view all tabs in level 2 of my navigation and another user (emp) which can view one Tab page in level 2
Point 1 --the item nod are rendered according the #{securityContext.regionViewable['oracle.view.pageDefs.RentManagPageDef']}     (EL ) expression language
and other item nod render property are set as the same but in the page name definition
it works fine
_ Point 2 in my page template I set #{menuInfo.rendered} for renderd property of the command navigation item
it works fine
- point 3 I add a go link in my template to explicit perform log in log out from the app and redirect the user to the required page
Destination is
#{securityContext.authenticated ? "/adfAuthentication?logout=true&end_url=/faces/wearhouse.jsf" : "/adfAuthentication?success_url=/faces/company.jsf"}
and its also works fine
the problem is in the level 2 navigation tabs which is diaper after explicit log in the app directs the user to the correct page successfully
But the tabs are not rendered till I press on home button on Level 1 navigation it appears and it appears correctly cording the logged in user validation
in another words i log in as user (admin) i get directed to the successful log in page in the link go but level 2 tabs are invisible or not rendered at all    I click on Home button in level1 navigation the tabs
become rendered or viewable and i navigate normally
I log out as admin the level 2 tabs becomes invisible again
then I log in as (emp) i get directed to the successful log in page and level 2 tabs are still invisible or not rendered
I click on Home button in level1 navigation the only one tab the user emp authorized to it gets rendered (appears)
and its semi correct behavior because this is what I want him to see only
my tries to find solution
I tride to use
#{securityContext.userInRole['division']}
on the menu node item   I found same behavior level 2 tabs gets hidden till i click on home link at run time
I tride to use #{securityContext.authenticated} to control item nods rending
all tabs remains visible and i dont want that ain adition if user clicks on a tab of page he has no authority on it i recive server error
I read 30.7 Creating a Login Page in the Fusion Developer's Guide for Oracle Application Development Framework to finde about redirecting user
and it is using the same as i did from adf tutorials
I tried to make new navigation app on fast
maybe i made incorrect change in any stage of my original app
but I found same behavior
I tried to set disabled property instead of rendered property the tabs are always rendered   but I got server error when I click on a tab which a user does not authorized
So I doubt maybe problem in the El or the way I use to control rendering item node
or there additional step to stop all the tabs disappear after login
I hope please some one Help or tell me what i have to read about in the developer guide or interface developer guide or article on the web
I'll be gratfule
I know maybe it is small issue but help me please

Hi,
have a look at the sample that comes with this article: Oracle ADF: Security for Everyone It uses resource remissions to authorize panel tabs.
One test to run is to print the outcome of the security evaluation (e.g. output text) to see what it returns.
Frank

Ios7 bookamrking web application to home screen via Safari crashes after login and when we try to open any link inside. Can anyone please tell me if there is any scheduled fix for this bug in safari?

ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue?

ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue?

My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault?

My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault? When I connect to another computer via firewire and try to transfer files, finder freezes.

To use FireWire target disk mode
Make sure that the target computer is turned off.
If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
Press the target computer's power button to turn it off.
Unplug the FireWire cable.

Blue screen after login and HD and startup disk is full -how to erase data?

Blue screen after login and Hard drive and startup disk is full -How do I get in to erase data?

this user tip might help:
Your Mac needs adequate hard drive space to operate normally. How full can a drive be before it's too full? There is no hard and fast rule that says “X” amount or “%” of free drive space is needed. A low amount of RAM requires more drive space for Virtual Memory’s swap files.
Problems from insufficient RAM and free hard disk space are discussed in this link
http://www.thexlab.com/faqs/lackofram.html
Here’s some general guidelines for minimum hard drive free space:
1. As a general rule, your available space should be 5GB as an absolute minimum as it generally requires that much free space to perform an Archive and Install of Mac OS X and still preserve some free space for VM swap files.
2. Some say that your hard drive should have at least 5% of it's capacity available for use. Still others say 10% to 15%. If you routinely process complex graphics and videos, even more space is required.
Look at these links about freeing up more space.
Where did my disk space go?
_*http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243*_
Download & use WhatSize described in this link or Disk Inventory X @ _*http://www.derlien.com/*_
Freeing space on your Mac OS X startup disk
_*http://www.thexlab.com/faqs/freeingspace.html*_
Amazing Disappearing Drive Space
_*http://www.pinkmutant.com/articles/TigerMisc.html*_
Increase HD Free Space
_*http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html*_
How to free up my disk space
http://www.macmaps.com/diskfull.html
JGG

Password protected iWeb sites - problem with login

This is an FYI regarding a problem I recently encountered. Neither MobileMe, nor Apple tech support or specialists were able to resolve it, but I finally figured it out.
I created a company website for my client, including secondary websites that were password protected in order for her clients to download support materials for her classes. The passwords worked fine last night, but this morning we could not login with the setup passwords. Even when we changed them and tried to re-upload the entire site, we could not. I don't know specifically what changed, but we went through a plethora of solutions over many hours, but to no avail.
In the end, it appears that how we setup the domain was where the problem existed. We have our own domain through Netfirms, which we set up to use in MobileMe as per the instructions. In Netfirms however, when you log into version 8, it does not give you the option to change the CNAME, as MobileMe states needs to be done. Instead I had set up the domain to forward to our "web.me.com/company" site. This was the problem.
To correct this, I turned off the url forwarding and logged out of Netfirms. Then logged back in, but into version 6 of the control panel. From here I was able to setup the CNAME as web.me.com. And ta-da, once it updated on the server the entire site and all password protected areas are working as needed.
Phew.

To password protect a site, folder or page when using a server other than MobileMe you need to either enable this in your control panel or do it using a .htaccess file.
The server side script is the most secure way to do it. There are javascripts that you can use but they are less secure.....
http://www.javascriptkit.com/script/cutindex6.shtml
Doing it via the control panel is easier but, if you want to go the htaccess route, you can generate it online here....
http://tools.dynamicdrive.com/password/

When combining files, conversion keeps failing with red notice that the document if password protected. What does that mean and what do I do?

When combining files, conversion keeps failing with a red notice that the document is password protected. I was combining all pdf files and had just been successful with some of the same content under a different file name. What is wrong and how do I correct it?

Hey SUSANO,
I am sorry but you cannot combine files if they are password protected.
You can check the same under 'File > Properties> Security
Regards,
Anubha

Aperture 3.5.1 Import panel empty after iTunes 11.2.1 security update

Just a coincidence?
When I installed the recent iTunes 11.2.1 (1) security update, that directly followed the combined MacOS X 10.9.3 / iTunes 10.2 update, I got a warning, that Aperture had to be quit before installing the update.
After relaunching Aperture the Aperture Import panel stopped working:
The fonts in list view were upside down:
The Toolbar was empty and only gradually items kept reappearing.
The File Chooser and the Import settings bricks were empty.
Aperture was hanging on "Loading Assets" and not very responsive.
Clicking onto the empty bricks did occasionally reveal a pop-up menu:
This problem seems to be fixed, after I trashed Preferences and Presets:
~/Library/Preferences/com.apple.Aperture.plist
~/Library/Containers/com.apple.Aperture
~/Library/Application Support/Aperture/Import Presets.plist
But I would like to know, if anybody else had similar problems with Aperture after the recent MacOS X 10.9.3 / iTunes 11.2.1 update.
SInce this iTunes update fixes a security issue it should not be skipped.

It was just a coincidence Sorry, iTunes!
The problem was, that a broken file on my Desktop messed up the Import panel.
As soon as I add a certain empty PDF file with the name "119435-45-55 [6L].pdf" to my Desktop, strange things will happen with the Import panel on all three of my Macs running MacOS X 10.9.3 and Aperture 3.5.1. It took me a while to identify the file, because Aperture does show the filename as empty and does not show a preview.
The Import window will be messed up -
missing icons from the Toolbar and Import settings pane,
the File Chooser will be empty,
the busy indicator will show "Loading assets", and the Activity Window "Building Thumbnails"
The thumbnail of the corrupted file will be empty and the filename is showing as empty,
When I switch to list view, all text will be upside down as shown in my original post.
The problem is not caused by the brackets in the filename; if I rename the file, Aperture is still acting up. The file cannot be opened in Preview either.

10.5.2 Grey Screen after Login (and never goes away)

I installed 10.5.2 late last night on my January 2008 Mac Pro and since hitting 'reboot' to install the update I haven't been able to use my system.
I get to the Login Prompt, login with my username and password, and then all I get is a grey screen with a spinning colored cursor. It was that way still this morning when I woke up, as well as when I got home from work several hours later.
I have subsequently shutoff my machine several times and it still does it everytime I login.. has anyone experienced similar issues and is there a fix besides re-installing from the restore CD?
Christopher

I read several threads and tried several things and this is what fixed it.
I was able to boot up into single user mode.
I then tried safe mode.. it took about 10 minutes but I got to the desktop after logging in.
I then ran Software update again and it installed "Leopard Graphic Drivers Update". I then rebooted. Now everything works again! Still a pain!
Christopher

Black screen after login and slow NAL

Hi,
We have a problem which we think is ZFD related. Immediately after the
login there is a black screen presented and the pc appears to be doing
nothing. After 30 seconds or up to 3 minutes the desktop appears. At
that moment the NAL starts and again we have to wait for 1 to 5 minutes
for the NAL to appear.
Here are some figures:
3300 users
700 applications
7 cluster servers
NetWare 6.5 sp5 + nw65sp5upd1 + iscsi65sp5a
GroupWise 7.0 sp1
ZenWorks for Desktops 7.0 sp1
(and iPrint, BorderManager 3.8, NetMail 3.5.2, Identity Manager 3.01)
Windows XP sp2 fully patched
Office 2003
Novell Client 4.91 sp2 + pkc
We are using DLU. The difference in the delay times is because of
hardware. On older hardware you'll have to wait longer. That makes sense
but keep in mind the oldest hardware is still a P4 1,6 with 256Mb RAM.
But 1 and a half minute extra startup time for a brand new pc is still
quite a lot.
We have had an expert at our site. The obvious like SLP, DNS was not our
problem. He took some traces and again no problems found. There are some
posts with ZFD 6.5 which mentions this black screen but no solution is
provided.
Most of our applications are associated with the users' container.
Anyone please?
Joost Sannen

Hi Craig,
We'll follow up your advice and let you know. Currently I'm at home with
the flew so you have to wait for it.
Thanks,
Joost Sannen
craig wilson schreef:
> The "startup" times you are seeing are not the norm and vastly different
> from what most people see.
>
> You need to take steps to see what is causing your delays.
>
> The first thing is to determine where the delay is occurring.
>
> Login as a user that belongs to ZERO policies. No DLU. No Group
> Policies on a PC that has NO workstation Policies. The Windows Account
> should already exist on the PC.
>
> This is your base-line.
>
> Then Add in DLU but no other policy. (Test Volatile vs Non-Volatile)
> W/O DLU, test using Windows Group Policies that you have assigned.
>
> For DLU, you need to minimize the Profile size.
> New users on a PC for me usually add a few seconds but not a lot.
>
> The difference here is less than 1 second in a Windows vs ZEN
> Environment for the creation of the account. The delay is in creating
> the account which is handled by Windows in the same manner in both cases.
>
> For your GPOs, make sure you are following best practice of only setting
> the required settings. Do not set a value that is equal to the default
> value. Each setting you change increases GPO policy processing time.
> Again, Windows not ZEN processes this and the delay would be the
> identical in both cases.
>
> -------------------------------------------------------------------
> NAL Startup Time - This can be a load of things.
>
> Turn of "Reading of Groups" as a test. This is often a big cause of
> delay. You need to test how much of a delay this is causing.
>
> Do you have a large number of apps assigned to the user (by any fashion)
> with lots system requirements. Realize that if a user has 700 apps
> assigned to him but they only appear if they meet a complex set of rules
> this will cause delays.
>
> Do you have a large number of "Force Run" apps running upon the Start of
> NAL? This can cause huge delaays.
>
> Again specific tests to help.
> ------------------------------------------------------------------------
> After logon, are you attached to any replica servers located across a
> slow WAN link? We may need to try and make sure we delay attaching to
> these servers during initialization.
>
>
>
>
>
>
>
>

Blue tint after login and/or leaving the screensaver

Allot of the time when I leave the screensaver or login my screen decides chuck in an aqua blue tint.
Any ideas how to go about fixing this?
Thanks very much in advance!

HiJim,
Did you ever figure this out? WHat was causing the purple blue tint after waking?
I have my iMac G5 with X.4.11 set to wake up in the morning, but when I get to my desk I see the purple light blue screen. Upon moving the mouse I can see the screensaver is working “underneath.”
Sure would love to fix this.
Anybody able to help?
Thanks, and so long for now, TOM

Windows 8.1 desktop empty after updating and application

I was at the Windows 8.1 desktop. while updating an application (not Microsoft) all seemed to go well. AT the end the desktop was completely empty. No Taskbar, no desktop picture, or desktop icons.
The Windows logo key on the keyboard wouldn't take me to the Start Screen. Right clicking on the desktop also did nothing. ALl I could think of was to turn the computer off using the power button. Is there a better way?

Hi,
I would like to know the certain name of the application you updated.
It seems that the updating of the application make the explorer.exe crash or no responding.
I suggest you press ctrl+alt+del, and click Task manager.
Then end the process explorer.exe, and click File -> Run New task -> type in explorer.exe.
See what's going on.
Kate Li
TechNet Community Support

I have a password protected the main account on computer and forgot password and lost reboot disc what can I do

I had installed password to the main account and forgot it I do not have the reboot disc what can I do about this issue?

Nothing until you get the discs that originally came w/the computer. Or take the computer to your local Apple Store or an AASP. They will be happy to help you FOR A FEE!

OS X Mountain Lion crashes immediately after login and reboots.

Help please.

HI,
Yesterday there was an outage with both FaceTime and iMessages at the server end.
Has it been working up until then ?
9:15 PM Monday; November 19, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Password protected remote panel empty after login and connecting

Similar Messages

Maybe you are looking for