Password synchronization problem between sun DS and ADS

Hi
I installed the sun one indentity synchronization 1.0. I synchronize password between one DS and one AD.It is working fine. My problem is i want to synchronize between two sun one DS and one AD , but it is ignoring the one DS in Sync , anothe DS and AD is Synchronizing. It is not synchrnonizing the two DS and one AD server.
My SUL Configuration is
SUL Name : DS1ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=ameer.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=ameer,dc=com
destinationindicator=ameer.com
SUL Name : DS2ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=basha.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=basha,dc=com
destinationindicator=basha.com
I am synchronizing the existing users using the following file.
<?xml version="1.0" encoding="UTF-8"?>
<UserLinkingOperationList allowLinkingOutOfScope="true">
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS1ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="sn"/>
<AttributeDescription parent.attr="WindowsAttribute" name="sn"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS2ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="givenName"/>
<AttributeDescription parent.attr="WindowsAttribute" name="givenName"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
</UserLinkingOperationList>
     Should not showing the any error after synchronization.
I am giving my log files     
resync log
[05/Jan/2005:17:29:12.505 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11112]'." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:12.958 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11111]'." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:13.051 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=0)
[05/Jan/2005:17:29:14.098 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=0)
[05/Jan/2005:17:29:17.442 +0530] INFO 71 CNN100 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=5)
[05/Jan/2005:17:29:18.567 +0530] INFO 62 CNN101 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=10)
[05/Jan/2005:17:29:22.098 +0530] INFO 72 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [employeenumber=11111, givenname=ameer1] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer1,cn=Authorization1,dc=basha,dc=com' [employeenumber=11111, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-11, SN=5)
[05/Jan/2005:17:29:22.098 +0530] INFO 71 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [employeenumber=11112, givenname=ameer2] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer2,cn=Authorization1,dc=basha,dc=com' [employeenumber=11112, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-10, SN=5)
[05/Jan/2005:17:29:22.520 +0530] INFO 73 CNN102 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=5)
[05/Jan/2005:17:29:22.629 +0530] INFO 63 CNN101 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=10)
audit log
[05/Jan/2005:17:29:15.629 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=3)
[05/Jan/2005:17:29:15.895 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:16.208 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=3)
[05/Jan/2005:17:29:16.989 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=4)
[05/Jan/2005:17:29:17.442 +0530] FINER 13 SysMgr_100 csi2a01 "Sending an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.473 +0530] FINE 13 SysMgr_100 csi2a01 "Sent an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.457 +0530] FINE 71 CNN100 csi2a01 "The agent has received the following inbound action from the controller: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=6)
[05/Jan/2005:17:29:17.489 +0530] INFO 71 CNN100 csi2a01 "The agent is sending the following inbound action to MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=7)
[05/Jan/2005:17:29:17.504 +0530] FINER 71 CNN100 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.192 +0530] FINE 16 CNN101 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.364 +0530] FINE 16 CNN101 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=9)
[05/Jan/2005:17:29:18.676 +0530] FINER 62 CNN101 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=11)
Please do the needful
Basha

Hi Joshua,
Does this mean that I need to install the core and sub component but no need to install the DS and AD connectors. No!!! Core must only be installed on one machine! Here is a short summary of the steps during an installation having sun ONE LDAPs in multi-master replication (taking ldap2 as the machine, whrere core is installed):
1. Install core on ldap2
2. start console and configure your directory sources. For the sun directory source enter ldap2 as the preferred and ldap1 as the secondary ldap. Configure the rest: attribute-mapping, modification flow, AD-source, SULs, etc. save the configuration.
3. on ldap2 run idsync prepds untill you get the SUCCESS message in the following way (be sure to specify the secondary ldap with -j and -r options):
idsync prepds -h <ldap2> -p <ldap2port> -j <ldap1> -r <ldap1port> -D "cn=directory manager" -w <passwort> -s  <configuration_registry_suffix>4. Run the install binaries again on ldap2. Install DS Connector on ldap2, install DS-Subcomponent (preferred) on ldap2. Install AD-Connector.
5. Copy over install binaries to ldap1. Run the install binaries on ldap1. Give ldap2 as configuration directory URL When you are asked, what components to install, select subcomponent. Select the suffix. When you are asked, what type of ldap, select secondary.
6. Copy over install binaries to any ldap slave in your replication topology and install the subcomponent there, choosing "other" as the ldap type.
Good luck again...
Jakob.

Similar Messages

  • Synchronization problem between the iPhone and iTunes

    Hello
    How do I solve this problem of synchronization between the iPhone and iTunes?
    He always gives me this err:
    Problem Event Name: APPCRASH
    Application Name: SyncServer.exe
    Application Version: 17.641.8.1
    Application Timestamp: 4c0ed8cb
    Name of the default module: CoreFoundation.dll
    Default Module Version: 1.550.26.13
    Module Timestamp default 4bff35d2
    Exception code: c0000005
    Shifting the exception 00043dd9
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1036
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Details No. 4: 0a9e372d3b4ad19135b953a78882e789
    Also another error:
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application version: 17.758.0.68
    Application Timestamp: 4c0ed8cb
    Name of the default module: CoreFoundation.dll
    Default Module Version: 1.550.26.13
    Module Timestamp default 4bff35d2
    Exception code: c0000005
    Shifting the exception 00043dd9
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1036
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Details No. 4: 0a9e372d3b4ad19135b953a78882e789
    Thank you in advance for help.
    <Config> Windows 7 / iTunes 9.2 / iPhone 3G 16 GB>

    http://discussions.apple.com/thread.jspa?threadID=2470826&tstart=60
    A discussion a little way down send you to a website charlesgates?? i think and he will walk you through your problem.
    Corefoundation.dll is your issue. Good LUCK!!

  • Password synchronization problem

    Hi All,
    We have configured password synchronization in our SUN IDM Environment.Now we are facing problem with expired Passwords.
    Password synchronization is not working with expired passwords.Normal users are able change their password and password change is reflecting on all the configured resources.
    Please suggest me on this.
    Thanks in Advance
    Madhu

    Hi Joshua,
    Does this mean that I need to install the core and sub component but no need to install the DS and AD connectors. No!!! Core must only be installed on one machine! Here is a short summary of the steps during an installation having sun ONE LDAPs in multi-master replication (taking ldap2 as the machine, whrere core is installed):
    1. Install core on ldap2
    2. start console and configure your directory sources. For the sun directory source enter ldap2 as the preferred and ldap1 as the secondary ldap. Configure the rest: attribute-mapping, modification flow, AD-source, SULs, etc. save the configuration.
    3. on ldap2 run idsync prepds untill you get the SUCCESS message in the following way (be sure to specify the secondary ldap with -j and -r options):
    idsync prepds -h <ldap2> -p <ldap2port> -j <ldap1> -r <ldap1port> -D "cn=directory manager" -w <passwort> -s  <configuration_registry_suffix>4. Run the install binaries again on ldap2. Install DS Connector on ldap2, install DS-Subcomponent (preferred) on ldap2. Install AD-Connector.
    5. Copy over install binaries to ldap1. Run the install binaries on ldap1. Give ldap2 as configuration directory URL When you are asked, what components to install, select subcomponent. Select the suffix. When you are asked, what type of ldap, select secondary.
    6. Copy over install binaries to any ldap slave in your replication topology and install the subcomponent there, choosing "other" as the ldap type.
    Good luck again...
    Jakob.

  • Externalizable problems between v1.3 and v1.4

    Hej you.
    I have strange problems with the Externalizable objects.
    I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
    E:\Programmer\Java\ProrgamName>Java ProrgamName
    javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
    ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
    Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
    When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
    See my early quenstien on (closed):
    http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
    With very regaards By:
    Super Bomba, Denmark
    PS. No Duke Dollars this time. Sorry.

    Hey.
    I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
    Use follow code (I using Externalizable):
      protected DefaultMutableTreeNode rootNode=null;
      protected DefaultTreeModel treeModel=null;
      public void writeExternal(ObjectOutput stream) throws IOException
      { stream.writeUTF(rootNode.toString());
        Vector values = new Vector();
        Object root = treeModel.getRoot();
        // Save the root, if its Serializable.
        if(root != null && root instanceof Serializable)
        { values.addElement("root");
          values.addElement(root);
        stream.writeObject(values);
      public void readExternal(ObjectInput stream) throws IOException
      { thisModel.removeAll();
        thisModel.setVisible(false);
        try
        { String title=stream.readUTF();
          rootNode = new DefaultMutableTreeNode(title);
          Vector values = (Vector)stream.readObject();
          int indexCounter = 0;
          int maxCounter = values.size();
          treeModel = new DefaultTreeModel(rootNode);
          if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
          { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
            treeModel = new DefaultTreeModel(root);
            indexCounter++;
          // kode for setting the tree start here
        catch (ClassNotFoundException e) {}
      }Hope, this is to use :-)
    Hi from
    Super Bomba

  • Connection Problems Between iChat 3 and iChat 4 Workaround

    Maybe this info will help others:
    iChat 4/Leopard users must initiate video chat to iChat 3/Tiger users:
    I have discovered that if an iChat 4/Leopard user initiates the video chat to an iChat3/Tiger user, it works, but if the iChat3/Tiger user initiates the video chat with an iChat 4/Leopard user it fails with a message saying that the receiver declined the invitation (even if the receiver tried to accept). This happens on a LAN as well as across the Internet.
    Likewise, to make conference video chats, make sure the iChat 4/Leopard user initiates, then adds the other parties.
    This post is NOT about iChat Server, although the problem occurs there too. If you are using iChat Server (part of OSX Server) see http://discussions.apple.com/thread.jspa?messageID=5995966 ).
    Hope this helps.
    ppj

    Hey.
    I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
    Use follow code (I using Externalizable):
      protected DefaultMutableTreeNode rootNode=null;
      protected DefaultTreeModel treeModel=null;
      public void writeExternal(ObjectOutput stream) throws IOException
      { stream.writeUTF(rootNode.toString());
        Vector values = new Vector();
        Object root = treeModel.getRoot();
        // Save the root, if its Serializable.
        if(root != null && root instanceof Serializable)
        { values.addElement("root");
          values.addElement(root);
        stream.writeObject(values);
      public void readExternal(ObjectInput stream) throws IOException
      { thisModel.removeAll();
        thisModel.setVisible(false);
        try
        { String title=stream.readUTF();
          rootNode = new DefaultMutableTreeNode(title);
          Vector values = (Vector)stream.readObject();
          int indexCounter = 0;
          int maxCounter = values.size();
          treeModel = new DefaultTreeModel(rootNode);
          if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
          { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
            treeModel = new DefaultTreeModel(root);
            indexCounter++;
          // kode for setting the tree start here
        catch (ClassNotFoundException e) {}
      }Hope, this is to use :-)
    Hi from
    Super Bomba

  • Difference Between Sun JVM and IBM JVM

    Hi
    Can some one let me on the difference between Sun JVM and IBM JVM
    regs
    Vivek Nidhi

    Sun's JVM is built on HotSpot technology: http://java.sun.com/docs/hotspot
    and covers a broad range of OS/HW combinations: http://java.sun.com/j2se/1.5.0/system-configurations.html
    Maybe you can be more specific in your question or in describing what you want to do.
    -Alexis

  • IChat - compatibility problems between v2.1 and v3.1

    Hi,
    I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
    I can see and hear him, but he can only hear me.
    Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
    Thanks a lot for any information
    Bruno

    Most likely cause is that you haven't updated the ProApplication Support file. Check here:
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

  • Differences between Sun JVM and Microsoft JVM.

    Differences between Sun JVM and Microsoft JVM.
    I have a very simple applet that I am trying to make compatible with both Microsoft�s JVM and Suns JVM in Internet Explorer.
    However, when I turn on the Sun JVM it works occasionally, but frustratingly on most occasions I get the following error messages:
    In the status bar: "Applet <name> notinited"
    And when I investigate further in the console I get the following output:
    load: class <name>.class not found.
    java.lang.ClassNotFoundException: <name>.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Malformed reply from SOCKS server
         at java.net.SocksSocketImpl.readSocksReply(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.net.NetworkClient.doConnect(Unknown Source)
         at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient$3.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.net.www.http.HttpClient.privilegedOpenServer(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
         at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    It appears that the applet never gets loaded. I have no idea why?
    What is the Sun JVM doing here?
    Many thanks in advance for any help.

    Oh, one more thing. Here's the outpt of the VM log when I run the test above:
    Java(TM) Plug-in: Version 1.4.2_03
    Using JRE version 1.4.2 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\Michael
    Proxy Configuration: No proxy
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    p: reload proxy configuration
    q: hide console
    r: reload policy configuration
    s: dump system properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    java.lang.NullPointerException
         at sun.plugin.cache.Cache.updateTable(Unknown Source)
         at sun.plugin.cache.FileCache.getMatchingFile(Unknown Source)
         at sun.plugin.cache.CachedFileLoader$2.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.plugin.cache.CachedFileLoader.getCacheFile(Unknown Source)
         at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
         at sun.plugin.cache.FileCache.get(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.connectWithCache(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at sun.plugin.net.protocol.http.HttpURLConnection.getHeaderField(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    v

  • How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

    Hi,
    I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
    Here is the description of the problem:
    1. In Outlook - please create a new event/appointment (e.g. "Test").
    2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
    3. Click on "0,5 days" and change it manually to "14,5 days".
    4. Click on "Save & Close".
    5. (Do not snooze or dismiss the reminder.)
    6. Sync with your iPhone/iPad.
    7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
    The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
    However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
    Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
    Thanks!

    Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do: 
    Launch iTunes.
    Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
    Connect the iPhone to the PC and let iTunes recognize it.
    In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
    In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
    In the top left of the iTunes app > click Exit.

  • Problem between SOAP Sender and JDBC Receiver

    Hi,
    I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
    The idea is sending an ID for updating one register.
    Table structure is:
    TABLE AS_PERSONA
        (P_RUT                         VARCHAR2(10) NOT NULL,
        P_NOMBRE                       VARCHAR2(50),
        P_APELLIDO                     VARCHAR2(50))
    The ID is the P_RUT field.
    The structure of message that I send by SOAP, is the following:
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
         <SOAP-ENV:Body>
              <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
                   <CONSULTA>
                        <P_RUT>15445</P_RUT>
                   </CONSULTA>
              </m:MT_CONS_SOAP>
         </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    The JDBC receiver structure is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
         <Statement>
              <AS_PERSONA action="UPDATE">
                   <table>AS_PERSONA</table>
                   <access>
                        <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                        <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
                   </access>
                   <key>
                        <P_RUT>15445</P_RUT>
                   </key>
              </AS_PERSONA>
         </Statement>
    </ns0:MT_CONS_PERSONA>
    When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
    I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
    This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
    I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
    Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
    Thanks.

    Hi,
    Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
    Regards,
    Sushumna

  • User synchronization issue between Active Directory and Solution manager.

    Requirement:
    Synchronize the users between Active directory and solution manager system.
    <u>What we did:</u>
    1.     Created RFC connection (LDAP_RFC) for LDAP connector.
    2.     Created new LDAP connector that utilize the RFC (LDAP_RFC).
    3.     Created new logical LDAP Server(CUA).Here we have to maintain the connection
    details to the physical directory.
    4.     We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
    5.     In transaction LDAPMAP specific SAP data fields, we mapped to the desired
    directory attributes.
    6.     Testing from LDAP transaction working fine. We are able to see the attributes and
    values       from Active directory.
    <b><u>Issue:</u></b>
    When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
    LDAP Server = CUA (created earlier)
    LDAP Connector = LDAP_RFC (RFC connection created created ealier)
    In the tab: (Object that exist both in the directory and in the Database:)
    Selected: Compare Time Stamp.
    In the tab: (Objects the only exist in the Directory.)
    Selected : Create in Database.
    In the tab(Objects that only Exist in the Database:
    Selected: Ignore Object.
    Result from the report shows that connection to LDAP server is fine and ‘0’(zero) objects in Directory.
    The program does not create any new user in the Solution Manager system.
    Any help on this issue greatly appreciated.
    Thanks & Regards,
    Harish

    where did you see this error ? is there anymore details.
    i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
    http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
    Thanks, Noddy

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • NFS problem between RedHat Client and Solaris Server

    Hi all, we are experiencing a problem between a RedHat client and a Solaris 10 server. For the purposes of this post, I'll call the Redhat client server A and the Solaris 10 server B.
    Server B is exporting a filesystem that server A is trying to mount. Server A can successfully mount the exported file system, however, strange things are happening. If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.
    A look at the file on server B shows the file has the correct UID and GID (ie the UID & GID of server A).
    The fstab file on server A looks like this:
    serverB:/data /data nfs4 rsize=32768,wsize=32768,hard,nointr,rw,bg,actimeo=0,timeo=300,suid 0 0
    Does anyone have a explanation for this?
    NB: There is a firewall between server A and server B. A firewall rule is in place to allow traffic between the two servers on port 2049
    Stewart

    Hi
    If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.On a NFS share, for security reasons, you normally dont have root provileges.
    A file createt as root user will be mapped to nobody:nobody.
    The behaviour you see is correct.
    If you want the file to be createt as root, you have to export the filesystem with -o ro,anon=0
    NFSv3 will be blocked by your firewall.
    Franco

  • Email sync problem between iPad Air and iPhone 6+

    Hello,
    I have a user that travels quite a bit. We use Office 365 Enterprise
    for our emails. He is reporting email sync issues between iPhone and iPad. Meaning
    sometimes he will receive emails on the iPhone but not on the iPad or vice versa.
    Both devices use the same AT&T network. Does anyone out there have any
    suggestions as to what may be causing the sync problem between devices? I am
    not sure if the devices ever have the same emails on the inbox. Does this make
    sense? I will be happy to provide any other information if needed.
    Thank you!

    Hey daniel hkn,
    Thanks for the question. It sounds like the email account may be configured and setup as a POP account. If so, check out this resource:
    Using a POP account with more than one device - Apple Support
    http://support.apple.com/en-us/HT201855
    When using the same POP email account on more than one device, email messages may appear only on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server after an email client has received it. You can configure your iPhone, iPad, iPod touch, or Mac either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your inbox.
    Thanks,
    Matt M.

  • Connection problem between sap bw and EAI

    Hi
    Please
    I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
    System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
    I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
    Cordialy

    Hello,
    we have 2 possiblities in BW to get data into BW.
    1) pull
    2) push
    I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
    and
    https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
    If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
    You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
    All of these possibilies are decribed in the online help and in howto papers.
    hope this helps
    Michael

Maybe you are looking for

  • User-exit/BADI needed for SD related FI documents

    Hi , does anyone know of a function-exit/BADI that is executed in FI document creation (SD related) at a point in the logic after EXIT_SAPLV60B_008?  I need to be able to manipulate internal table XACCIT after the standard FI item aggregation has occ

  • Integration Directory - Transport using CMS does not appear

    Hi guys, I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available. I've done the necessary steps on the exchangeProfile in order to transport obje

  • Custom field creation using ajax in SP 2010

    Hi, If anybody create custom field using ajax toolkit, kindly share me the link or steps. Thanks, Senthil

  • Fake apple email

    Just got this in my regular email folder?! I did not order/purchase anything! Is my account hacked or is this just a phishing attempt?

  • Best way to remotely connect to 10.4 Server

    Hi, My boss wants to have someone from a different site be able to log onto our server shares in order to work remotely from a different state. The server is currently running 10.4.11 Server. I haven't set up FTP before, but I've found that if you us