Passwords for websites on localhost (xampp) server

Hello
I'm web developer and I have a ton of websites on my xampp server on localhost.
Many of those are Joomla websites and each has different and long Admin password which I would like to be remembered by FireFox password manager.
When previewed locally they these have addresses like this:
http://localhost/some-website-name-1
http://localhost/some-website-name-2
etc.
Problem is that FF password manager remembers em like this:
"http://localhost", website name is not remembered, which means that I cannot use FF password manager for storing passwords on localhost, because all localhost website names are stored with same URL.
Is it possible to modify FF password manager to remember full website name on localhost?
So that website is remembered like "http://localhost/some-website-name-1" instead of just "http://localhost".
I guess that an option to manually edit remembered sites would solve this issue as well.
Thanks
Regards

'''2 dumdidadida:'''
- password manager works OK, but problem is that if I try to store password for this website name: "http://localhost/myweb1"
Instead of "http://localhost/myweb1" FF password manager (FFPM) stores it like this "http://localhost". It cuts off "myweb1"
So If I have 100 websites on my localhost server, all with different names
http://localhost/myweb1, http://localhost/someotherwebname, etc, FFPM stores all of them like this "http://localhost", so FF treats all of them like same web.
This problem exists only on my localhost apache XAMPP server where I'm developing websites.
'''2 cor-el:'''
- I tried to use "Saved passwords editor" FF extension, but if I manually edit saved "http://localhost" URL, and change it into "http://localhost/myweb1" FF doesn't prompt for saved password anymore, when I try to log in.
Anyway, Ill just continue to use text file with passwords, like I was doing from the start :)
Thanks for your replies.
Regards

Similar Messages

  • I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

    I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

    If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
    If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

  • Ipad can't store username password for websites

    I'm using an iPad Wifi with 3.2.1 and I am not the only one that is having a problem with Safari storing username and password for websites that need credentials.
    I cleared 'cookies', 'history' and 'cache' but that doesn't help.
    The desired websites don't show a popup if I would like to store the username and password for a website.
    Message was edited by: Wolfii82

    JimHdk wrote:
    Wolfii82 wrote:
    I'm using an iPad Wifi with 3.2.1 and I am not the only one that is having a problem with Safari storing username and password for websites that need credentials.
    I cleared 'cookies', 'history' and 'cache' but that doesn't help.
    The desired websites don't show a popup if I would like to store the username and password for a website.
    Message was edited by: Wolfii82
    Web sites with high security, i.e., banks, financial institutions, etc., do not allow user-id/password saving. If you are visiting one of these it is normal for no save dialog to be displayed in Safari.
    We could say more if you identified the web sites that you are talking about.
    I wouldn't allow the user name/password to be stored for any financial institution, even if the website allowed it. And the iPad isn't exactly the most secure device, so I would be really concerned if I lost it.

  • Blank password for sa user in SQL server

    i have already checked and confirmed that checkboxes in the SA login properties does not have a tick mark and also saved the properties window after leaving the password blank
    but when I'm unable to login to the software that is being connected to the respective database in sql server, i find that a password has been assigned to the sa user
    our application is not working if a password has been set for the sa user. please give me a solution to set a blank password for sa user and also to make sure that a password is not getting assigned automatically

    Why not just disabling SA login?
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How do I set the newest version of Firefox to remember passwords for websites ?

    Well, ... let me restate that. I think my current version DID remember passwords for me but now it doesn't . I access the options and go to privacy and security but it doesn't highlight to allow me to click on " remember passwords........................ " How can I fix this ?

    Make sure that you do not run Firefox in (permanent) Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy: Use custom settings for history
    *Deselect: [ ] "Always use private browsing mode"
    You can also check that you aren't starting Firefox with a -private command line switch.
    *https://developer.mozilla.org/en/Command_Line_Options
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • How can I get firefox to ask me to save passwords for websites and to turn back on my auto complete for webpages?

    Ever since the last update of firefox my autocomplete no longer functions and firefox no longer asks me if I want to save the password for sites I visit.

    "Remember passwords for sites" is shaded in the Private Browsing mode and when "Always use Private Browsing mode" is enabled.

  • Babysitter said don't ever remember passwords for websites we often use

    My wife and I have for 3 1/2 years enjoyed sharing one user admin account on iMac without problem. This week the babysitter, before I got to create a user account for her, used our account to access her own hotmail and facebook pages as well as some others. the only thing is that she said don't ever remember passwords for the sites.
    It's not a major issue, but is there some way to reset the password permissions in Safari? Do I just delete the cookies or do I have to somehow restore/reset Safari?
    Any help on this issue would be good. Thanks for your time.
    P.s - We have now created an account for guest users, including the babysitter.

    HI and Welcome to Apple Discussions...
    *"the only thing is that she said don't ever remember passwords for the sites."*
    It would be much easier to go to both MSN/Hotmail and Facebook sites. Where you sign in and type in a username, there should be a link to click that says: Forgot your password?
    If for some reason you can't do it that way, open the Keychain Access application.
    (Application/Utilities).
    Under Keychains on the left, select "login". Under category select Passwords.
    Select: login Facebook
    At the bottom of the window click the i
    (Just to the right of the + ) Select the Attributes tab. Select where you see; Show password.
    Carolyn
    Message was edited by: Carolyn Samit

  • Torch - Browser Questions: Formatting and Passwords for websites

    I had a Curve 8300 for 3 years and just got the Torch a week ago.
    1.  I often have trouble getting websites to format to the screen.  Usually (but not always), if I click the trackpad while the magnifying glass is on the website, it will work.  Again, usually - but not always.  Is there a way that I can consistently get websites to format to the screen?  What is the easiest way to do that?
    2.  I have a message board that I frequently read and post on.  I can't seem to do it from my Torch.  Here is what happens:
    -Site asks me for my login.
    -I login.
    -I type in my post and push the post button.
    -It again asks me for my login.
    -It won't even accept my whole post, just a word or two of it.
    NEVER had this problem on my Curve.  Can't figure out the solution.  Is there a way to stay logged in to the site permanently?  I've never seen any prompts for it.  And anyone know why my posts aren't taking?
    Thanks VERY MUCH for any help anyone can give.

    Make sure that you do not run Firefox in (permanent) Private Browsing mode (Never Remember History).
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *Deselect: [ ] "Always use private browsing mode"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • What is the default password for admin on Sun Application Server?

    Hi all,
    What's the password?
    I've tried "adminadmin" but it didn't work.
    And where can I set/change the password. I couldn't find those information in the docs which come with the JDK.
    Thanks in advance.

    There is no default password - you were asked to specify password during the Application Server installation.
    You can either uninstall and reinstall application server and make note of the password you are entering during the new installation, or try to reset password as specified here:
    http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
    (note that this document is specific to J2EE SDK/Platform Edition of the Application Server and may not work with Standard/Enterprise Edition).

  • I tell firefox not to remember passwords for certain sites, and it forgets when I exit

    I'm running 3.6.9 on Win7. I have chosen the setting of remembering passwords for websites. However, for certain sites I choose "never to remember passwords" and this used to work fine in earlier versions. Now, whenever I exit firefox these sites for which I do NOT want to remember passwords are forgotten about, and every time I visit them after a restart I have to instruct firefox that I don't want to remember passwords there, etc. It's getting awfully tedious. What changed? How do I ensure that my password "exceptions" are remembered between sessions?

    Make sure that you do not use [[Clear Recent History]] to clear the "Site Preferences"
    Clearing "Site Preferences" in "Clear Recent History" will remove exceptions that are stored in content-prefs.sqlite (site specific settings for zoom) and permissions.sqlite (exceptions for images, cookies, pop-ups, software; Tools > Page Info > Permissions) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    The password exceptions (Tools > Options > Security: Passwords: Show Passwords) are also removed from signons.sqlite.

  • Keychain and passwords for FTP messed up

    I cannot get my passwords to work properly anymore.
    when I try to publish any changes I get a message Pop Up
    Incorrect password for my "User Name " and server adress.
    when I go to the site name on the left for Site Publishing Settings a password is there. I test Connection it works fine and says I can now publish.
    I try publish site changes again it does not work. I get the same pop up as before, even when I enter the correct password in the box and  uncheck save in keychain it still does not work.
    Not only till I click off the save in Keychain box it works and publishes? I make another change Publish and it all works fine. Till I close down Iweb
    Upon relaunch all the same issues???
    Please help

    Open Keychain Access (in the utilities folder) and look for the entry under Login/Passwords.
    You can try selecting the entry and then choose Keychain First Aid from the Keychain Access dropdown menu.
    Either that or delete the entry (or entries) and then reset it in iWeb Publishing Settings.

  • Css files not updating in localhost (XAMPP test server)

    I've got an issue with a web page I'm developing where the .css files that I attach to the pages will not update on my local host.  I can make a copy of the file with a different name and link it to the page.  However, if I name any file a name that I've already used then the CSS reverts to whatever was on the original documents.  This is making my php page testing a pain when I view the page in a browser.  The problem doesn't seem to occur for my other websites, and completely goes away when I select "none" in the testing server options.  I'm using XAMPP to run my localhost testing server.  I'm using Dreamweaver CS4 on a Vista machine.  Any ideas?  If nothing else it would be nice to know how to delete the old files that are stuck in the testing server directory.

    Strange thing...  I turned it off and walked away for a few hours.  Upon my return I found the issue resolved.  I blame the shoe elves.  Thanks, you little guys!

  • : Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

    hi all can anyone help me i am geting Exception while starting LCES server
    : Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

    hi all can anyone help me i am geting Exception while starting LCES server
    : Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

  • I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1  I have no password and never needed one before. Please advise. Thanks, Regina

    I am attempting to update a page onmy website and the dialog box asks for a password for "50.63.96.1  I have no password and never needed one before. Please advise. Thanks, Regina

    That would be the password for your FTP server. You can only get this from your web hosting company. You should contact your web hosting company and ask them for your FTP Publishing details.
    Then select your web site name at the top of the list of web pages in iWeb. You'll see input fieldd for your FTP details. Enter what you get from your web hosting provider in those fields.

  • I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

Maybe you are looking for

  • Error while installing programs

    Log file in %temp% folder from C++ 2008 redistributable the log is the end part the forum would not let me post the whole log dd_vcredistMSI2F90.txt MSI (s) (DC:A0) [19:02:56:287]: Executing op: ActionStart(Name=RemoveODBC,Description=Removing ODBC c

  • Adding field in the standard report

    Hi , i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure. after adding that field(include structure), in output i am not getting that

  • MAP issue in MM

    Hi All, I have a problem in MAP (moving average price) in one of the material.Material shows MAP as 1.80 and the latest receipts shows as 2.07. I have looked in to MB51 and I could not find any way how MAp in MM is showing as 1.80 and also there is n

  • Variable creation for my report

    hi all, i have to create a variable for a characteristic (navigational attribute), and add it as optional selection criteria. but when i had done this, i am not getting the prompt window to enter the values for that particular variable in the BEx ana

  • OPS$ and database services

    All, I'm on 10.1 Solaris with an "OPS$" (externally identified) user, through which all application logins (batch loads) are made. I also have a range of database services and would like to connect this user to a specific service based on the batch t