PasswordSynch Configuration - Test Fails

I am trying to configure passwordSynch to work with Sun JMS. I have everything setup, including JMS Listener RA.
Now when I click the TEST button in the passwordSynch Configuration window, I get an error:
The underlying connection was closed: The proxy name could not be resolved, verify correct proxy configuration.This is a clear error, you would say, but I have NOT configured a proxy (unchecked checkbox: Proxy Server -> Enable ). So I have no idea why it is complaining about the proxy! :-S
Anyone else had this problem before, and managed to solve it? Plz, tell me how you did it?

OK, it seems it doesn't matter if I enable/check or disable/uncheck the Proxy Server settings for passwordSync, when Internet Explorer is configured to use a proxy server.
I have reconfigured Internet Explorer to NOT use a proxy server, and now I am having different errors. So I am on track. :-)
Maybe someone can help me out with the new error I'm having:
Test connection failed!
Server Error Message:
[DeliXLFactory]I think it cannot find the configured factory?

Similar Messages

ADS configuration test fails

Hi,
I gone through the ADS configuration document for NW70 and all the settings are exactly same as described in the document but still I am getting the following errors during the check.
1. When I execute test program "FP_TEST_00" I am getting below error,
" ADS: com.adobe.ProcessingException: The rule specified,(200101) "
2. When I execute destination service check using "FP_CHECK_DESTINATION_SERVICE" I am getting error as
"SYSTEM Error: com.adobe.ProcessingException: The rule specified, requires Output PDF named: Nodes, does not exist."
All other tests and configurations are working fine as mentioned in the configuration guide.
Please help me on this issue.
Regards,
Nallasivam.D

Hi
I am also facing the same issue, can you let me know what was the problem ?
Did you happen to resolve the issue ?
Appreciate your inputs.
Thanks
Sri

Workflow configuration error - System Account connection test failed

Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
Chethan

We had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan

In RDS Configuration, Test Connection is Succeful, but Test Debugger fail?

In RDS Configuration, Test Connection is Succeful, but I click Test Debugger
Test Debugger failL
"it said : An RDS connnection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: Coldfusion line Debugger is not enabled."
My Server is running normal, connection is OK! How to fix?

@waveset wrote:
Just concentrate on Username and Password. They are defintely not correct and as said by snowdog.Thank you for Snowdog and @waveset for your quick response.
Yes, "admin" and password "****" are an example about a user created in AD1 with rights enough to create and search objects in AD.
But I thing the problem is not the user. Could it be the password encryption?
I post a part of trace file for more information:
20080103 11:21:36.640 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponseBytes() Data [0x03b0]: 6f 00 6e 00 73 00 65 00 3e 00 0a 00
20080103 11:21:36.674 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponse() Exit returned= <?xml version='1.0' encoding='UTF-16'?>
<Response>
<Result status='error'>
<ResultItem type='message' status='error'>
<Message>
<Text>Error opening object 'LDAP://CN=Users, DC=mydomain, DC=vodam, DC=local': ADsOpenObject(): 0X8007052E: , 8009030C: LdapErr: DSID-0C09043E, comment: AcceptSecurityContext error, data 0, vece, Logon failure: unknown user name or bad password.
</Text>
</Message>
</ResultItem>
</Result>
</Response>

Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>

</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>

I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.

Windows App Certification Kit - Test Fails for Validate Desktop App at "Write appropriate Add/Remove Program values"

Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.

You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[svn] 3526: The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want .

Revision: 3526
Author: [email protected]
Date: 2008-10-08 14:21:40 -0700 (Wed, 08 Oct 2008)
Log Message:
The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want. Failures will get logged to the database at which point we can review them.
Also fix a failing test.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/services-config.xml

I have a standard Ant build script for signing a jar file. I import it into my master Ant build files with
<import file="Sign.xml"/>
and then in my master Ant script I setup the name of the jar file e.g.
<property name="jar-file" value="${fun}/FunApplet.jar"/>
and then invoke a target
<target name="sign-jar" depends="jar, sign">
</target>
Since this target (sign-jar) depends on target 'jar' and target 'sign' it executes the 'jar' target and then the 'sign' target that is contained in Sign.xml.

[svn] 1013: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException

Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java

VI Analyzer Front Panel Size and Postion Test fails

Hi
We make a lot of use of the VI Analyser and I have been playing with the configuration settings to try and make it only fail the tests that matter to us and I have one test I do not understand correctly.
From the LabVIEW help
Panel Size and Position—Checks that a front panel
completely resides within the bounds of the screen. The test also checks whether
the front panel is larger than the maximum specified width and height. If you
are using a multi-monitor system, the test fails if the panel does not reside
entirely within the bounds of the primary monitor. This test works only on
standard, control, and global VIs.
I would like to apply this test, a simple check developers are not creating huge VI, it sounds simple enough, but I cannot seem to get this test to pass.
I am working with two monitors and this test fails when my VI is on either monitor with the message "This VI's front panel does not reside entirely within the specified bounds (1280 x 1024)" my current screen resolutionis 1280 x 1024, so I assume as long as my VI front panel fits within one screen it should be a pass.
I can clearly see my that VI front panel (and block diagram for that matter) fits within the screen of either monitor. If I look at the VI properties of my VI the Window Size is 474 x 513, could anybody please suggest when why this might be failing.
cheers
Dannyt
Danny Thomson CLAD
Sub10 Systems Ltd
Solved!
Go to Solution.

Hi Norbert,
Thanks for the prompt reply, my asking the question and your reply has made me play with this a little deeper and I have managed to solve my problem.
In case anyone else has a similar problem here are the details.
When you have two monitors and look at the Windows properites you see one monitor is identified as 1 and the other as 2, thses identities are based on the graphics card and the which monitor is plugged into which ouptput connector. You can then chose which monitor you wish to act as your primary monitor. You would suspect it would not matter once you have selected your primary monitor BUT IT DOES.
My inital set-up
Left Hand Monitor    - idenity 2 selected to be primary monitor
Right Hand Monitor - identiy 1
With this set-up everything looks and acts as I expect it to task bar, icons etc on my primarry monitor. However if you run the VI Analyser it will fail Panel Size and Position on BOTH the left and right hand monitors.
I crawlled under my desk and swapped the monitors cables round so now the set-up is
Left Hand Monitor    - idenity 1 selected to be primary monitor
Right Hand Monitor - identiy 2
Now the VI Analysers Panel Size & Position Tests will pass on the left hand monitor but fail on the right hand monitor, just as would expect.
It appears that LabVIEW is looking not only at the windows "Primary Monitor" setting but also the identies, this does not seem the behaviour I would expect nor the correct behaviour.
cheers
Dannyt
Danny Thomson CLAD
Sub10 Systems Ltd

Perl unit tests fail

I tried to build version 2.5.16 with the following options:
./buildall.sh prefix=/usr/local enable-perl
I got the following message:
make[1]: Entering directory `--------/dbxml-2.5.16/dbxml/src/perl/DbXml'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/XmlContainerConfig.t ..... UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlContainerConfig.t ..... 1/28 BDB XML: Database environment not configured for encryption
XmlException=SCALAR(0xd6cac0)# Looks like you planned 28 tests but ran 25.
# Looks like your test exited with 2 just after 25.
t/XmlContainerConfig.t ..... Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/28 subtests
t/XmlDocument.t ............ UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlDocument.t ............ ok
t/XmlEvent.t ............... UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlEvent.t ............... ok
t/XmlIndexLookup.t ......... UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlIndexLookup.t ......... ok
t/XmlIndexSpecification.t .. UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlIndexSpecification.t .. ok
t/XmlManager.t ............. UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlManager.t ............. 31/92 failed
Error: Flags check failed for reindexContainer(). Expected some combination of 'DBXML_INDEX_NODES|DBXML_NO_INDEX_NODES|DBXML_STATISTICS|DBXML_NO_STATISTICS', but was passed 'DBXML_INDEX_NODES|DBXML_TRANSACTIONAL|DB_NOMMAP|DBXML_CHKSUM|DB_EXCL|DB_RDONLY'. in t/XmlManager.t, line 367
# Looks like you planned 92 tests but ran 53.
# Looks like your test exited with -1 just after 53.
t/XmlManager.t ............. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 39/92 subtests
t/XmlQueryContext.t ........ UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlQueryContext.t ........ ok
t/XmlResults.t ............. UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlResults.t ............. ok
t/XmlValue.t ............... UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 461
UNIVERSAL->import is deprecated and will be removed in a future perl at --------/dbxml-2.5.16/dbxml/src/perl/DbXml/../blib/lib/Sleepycat/DbXml.pm line 519
t/XmlValue.t ............... ok
Test Summary Report
t/XmlContainerConfig.t (Wstat: 512 Tests: 25 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 28 tests but ran 25.
t/XmlManager.t (Wstat: 65280 Tests: 53 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 92 tests but ran 53.
Files=9, Tests=535, 3 wallclock secs ( 0.11 usr 0.02 sys + 0.69 cusr 0.14 csys = 0.96 CPU)
Result: FAIL
Failed 2/9 test programs. 0/535 subtests failed.
make[1]: *** [test_dynamic] Error 255
make[1]: Leaving directory `--------/dbxml-2.5.16/dbxml/src/perl/DbXml'
If I don't used --enable-perl everything goes fine, the only problem is with perl enabled.
I'm using perl version 5.12.1.
Any ideas?
thanks

I turned off the deprecate warnings but still the tests fail.
And her is the result
PERL_DL_NONLAZY=1 /usr/bin/perl -w "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/XmlContainerConfig.t ..... 3/28 XmlException=SCALAR(0xd71428)# Looks like you planned 28 tests but ran 25.
# Looks like your test exited with 2 just after 25.
t/XmlContainerConfig.t ..... Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/28 subtests
t/XmlDocument.t ............ ok
t/XmlEvent.t ............... ok
t/XmlIndexLookup.t ......... ok
t/XmlIndexSpecification.t .. ok
t/XmlManager.t ............. 1/92 print() on closed filehandle F at t/XmlManager.t line 146, <DATA> line 225.
print() on closed filehandle F at t/XmlManager.t line 248, <DATA> line 225.
t/XmlManager.t ............. 46/92 failed
Error: Flags check failed for reindexContainer(). Expected some combination of 'DBXML_INDEX_NODES|DBXML_NO_INDEX_NODES|DBXML_STATISTICS|DBXML_NO_STATISTICS', but was passed 'DBXML_TRANSACTIONAL|DB_THREAD|DBXML_CHKSUM|DBXML_ENCRYPT|DB_EXCL|DB_RDONLY'. in t/XmlManager.t, line 367
# Looks like you planned 92 tests but ran 53.
# Looks like your test exited with -1 just after 53.
t/XmlManager.t ............. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 39/92 subtests
t/XmlQueryContext.t ........ ok
t/XmlResults.t ............. ok
t/XmlValue.t ............... ok
Test Summary Report
t/XmlContainerConfig.t (Wstat: 512 Tests: 25 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 28 tests but ran 25.
t/XmlManager.t (Wstat: 65280 Tests: 53 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 92 tests but ran 53.
Files=9, Tests=535, 3 wallclock secs ( 0.09 usr 0.01 sys + 0.68 cusr 0.14 csys = 0.92 CPU)
Result: FAIL
Failed 2/9 test programs. 0/535 subtests failed.
best,

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call
Hi,
I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for.
I looked up the error above to see if i could find a solution, but unfortunately I did not.
Right Let me start of with I am a Total Noob.. well it terms of having to install Oracle 11g myself.
In my University they hosted a database, and assigned us a User & pass thats how I have been using SQL Developer,
but since I am not longer a university student. I need to use Oracle Database.
So I downloaded Oracle 11g Enterprise Installed it on my laptop that i don't use much.
Name the Database: Rudu
It did all the installation, and seemed to have succeeded, I went on to the https://localhost:1158/em (Though am not sure why em? whats the deal with that? I thought it would be https://localhost:1158/Rudu) anyways....
Logged in using the System user.
Went to Users and created a user called: RUDUHR
Thought yeah its working... went on to my other laptop opened up SQL Developer.
Created Connection with the following Settings
Con Name: RK
User: RUDUHR
Pass: TEST
Con Type: Basic
Role: Default
Hostname: 192.168.0.8
Port: 1158
SID: Rudu
It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
I even tried using SYSTEM user to connect, but same error
also tried changing SID to em, it made no difference I keep getting the error Status: Failure -Test failed: IO Error: Got minus one from a read call
So ya am clueless... LOL I only know how to create tables and stuff not how to configure a Database.
and just so you know I did forward the port on me router to correct laptop.

It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
It is because you don't read documentation.
1158 is the default port for Enterprise Manager
1521 is the default port for Sqlnet.
Your port number is incorrect.
Needless to say, you can create your tables in EM too.
As per the Forums Etiquette post (first link when you get to this page) it is recommended you read documentation before asking Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

SQL Developer: Failure -Test failed: IO Error: Network Adapter No Conn

SQL Developer: Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Hi,
and sorry this is a really common questions and yes I did do a search, but I don't understand it.
First let me just tell you that Oracle 11g is installed on my second laptop on the same Network.
Secondly I can connect to the Database using Oracle SQL Developer on the laptop Oracle 11g is installed on.
The problem is I want to connect to the database on my main Laptop.
I put in the correct details Hostname 192.168.0.8 ( this is the laptop oracle is installed and running on)
Port 1521
SID dbarudu
****** YES I HAVE PORT FORWARDED
****** YES I HAVE ALLOWED 1521 on the FIREWALL
****** YES I HAVE EVEN SWITCHED OFF THE FIREWALL
Now one more thing you should know ... I don't know nothing about Oracle Servers ok.... so I have just installed Oracle 11g Enterprise and thought done it should be working now.
I just need to use oracle db for a project.
So keep in mind I am a total noob and terms like TNSPING etc mean absolutely nothing to me.
So please help, but help with step by step guide on how to get Oracle to let me have access from another computer.

If the Listener is working, then you should not get the error SQL-Developer error you are reporting.
The listener typically runs using the hostname and port 1521. This means it opens tcp port 1521 on all IP addresses of that platform.
The database server by default will register itself with the local listener. Thus the listener will know the database SID, the database services, whether there are dispatchers to support shared server connections and so on.
The client side needs simply to specify 3 pieces of data to connect:
- the IP of the database server
- the tcp port of the listener
- a database identifier (such as Oracle SID or service name) to connect to
It is really that simple.
If this does not work, the problem falls into 2 broad categories:
a) incorrect installation and configuration of the Oracle software (the out-of-the-box install works unless messed up)
b) some kind of networking issue
To troubleshoot any problem means reducing the complexity of the problem, eliminating multiple moving parts and focusing on specific ones, in order to isolate the problem.
For your problem, this will go something as follows:
- does the listener run? (check if the service is running and whether tcp connections are accepted on the listener port - telnet can be used for the latter)
- does the database successfully registers itself with the listener? (check the services command of the listener and relevant db initialisation parameters)
- does a local TNS (tcp network) connection work on that server? (use SQL*Plus and test on that platform client-server connectivity via tcp to the listener)
- does the client platform have connectivity with the server platform? (use ICMP and telnet to test)
- repeat the TNS test on the client platform using the same working TNS tested on the server platform
Do not use JDBC to test the connection - keep it simple and use sqlplus and the standard Oracle Call Interface (OCI). A full client version of the OCI plus sqlplus can be downloaded under the Oracle InstantClient downloads.
Finally - if you expect to simply install and use Oracle, then use the correct version. Oracle Express Edition aka Oracle XE. Installs and works out-of-the-box. The only manual config change to make is (as far as I recall) to run the listener on all IP addresses of that platform. And this required editing the listener.ora file, changing the HOST parameter and restarting the listener.
Also keep in mind that you have not presented an Oracle error code and Oracle error message. But a client application error message. And that message is pretty much meaningless - it does not point to a specific Oracle networking or Oracle server problem. To diagnose that, we expect a TNS or ORA error number.

System Landscape connection test fail

Dear EP expert,
I try to do a System Connection Tests for my system landscape and some part of the test failed.. Anyone have idea what is wrong with the configuration. Below are the test result and mainly are the HTTP/S connection and user mapping failed.
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (devportal01:50000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (absmrq01:8001)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Thanks,
Regards
Bryan

Hello gurus,
I am facing the same problem, could you please help me, the problem is http error detailed below
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name
6. User mapping is valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Thanks
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM

INTEGRATION_DIRECTORY_HMI Connection test fails

Hi ,
I am trying to configure INTEGRATION_DIRECTORY_HMI but the connection test fails as user cannot be authenticated. I found out that I need to put user XIISUSER in the logon tab. Now problem for me is that I do not know the password for XIISUSER.
Then I tried to search the user XIISUSER in SU01. For my surprise it was not there.
Can anyone tell me the steps to create XIISUSER and what roles I need to assign and where I have to register this user.
Thanks.
Regards,
Rahul

Hi,
Try to use PIISUSER instead.Its default password is the master password that you can be given from the basis.
Regards
Yu Ming

Problems with 11g on OEL5 (update 3) / net configuration assitant fails

While installing 11g on OEL 5 the net configuration assistant failed:
Oracle Net Services Configuration:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb7e772f3, pid=7352, tid=3084941520
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# C {noformat}[libc.so.6+0x6f2f3] index+0x63{noformat}
# An error report file with more information is saved as hs_err_pid7352.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
According to the existing articles on this problem the solution is using a static IP and/or adding the IP to /etc/hosts.
So did I, but: Net Configuration Assistant is still failing!
This is my /etc/hosts:
# Do not remove the following line, or various programs
# that require network functionality will fail.
192.168.1.4 localhost locahlhost.localdomain
127.0.0.1 localhost.localdomain localhost
Additionally, network is configured without DHCP! Although while checking the prerequisites the installer throw a warning ("... using DHCP may cause problems ...") which puzzles me.
I should be thankful for any hints/advices.
Edited by: user6877544 on Aug 29, 2009 2:45 PM: deleted square brackets around libc.so
Edited by: user6877544 on Aug 29, 2009 3:23 PM
Edited by: user6877544 on 30.08.2009 00:47 added square brackets around libc.so

After a reboot the "DHCP-check" is passed:
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:192.168.1.4
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :enterprise
INFO: Inspect interface file :/etc/sysconfig/network-scripts/ifcfg-eth0
INFO: Check complete. The overall result of this check is: Passed
But net configuration assistant is still failing.

PasswordSynch Configuration - Test Fails

Similar Messages

Maybe you are looking for