Paste some text in the windows clipboard

Hello,
i want to paste some text within a customer-specific scenario into the windows clipboard (CNTRL+C automatically done in background); has anyone some ideas how to solve this issue? I am inside a BSP, so i cannot use the old frontend services anymore...
Kind regards
Christian

Use - FM - CLPB_EXPORT - but it is obsolete.

Similar Messages

Clearing the windows clipboard

I have a non LabWindows CVI application that outputs info to the clipboard and I am pulling the info off the clipboard with my CVI application. I would like to monitor the clipboard to know when a certain operation is completed on the other application and then pull the data and clear the clipboard so that I can monitor it again for new data when it becomes available.
Is there a way to clear the windows clipboard from inside my CVI application?
thnaks

Al S wrote:
Robojeff:
I took a closer look at ClipboardGetText(). It looks like I was wrong about your use of free(CB). ClipboardGetText() must allocate the memory it needs when you call it. Your code closely follows the help example for ClipboardGetText().
I ran your loop under different conditions and could not get it to fail with an error. I tried running with and without the expected character. I tried with a single character in the clipboard and with >2Meg of text there. I tried running the loop while I dumped text onto the clipboard.
I tried pasting graphics and reading it as text: I didn't get an error on ClipboardGetText(), but I did trying to read CB[0].
How big is the dataset you're writing to the clipboard?
Have you checked what is in the clipboard after you get the error?
================
That is why I added the else free(CB): as I thought it might free up whatever memory that was being taken up during the many times that the clipboard is getting checked. The clipboard should only have * in it and getting the clipboard in the loop should not change the size of CB and how much memory that this takes should it?
When dummy = 1, here is the data that is on the clipboard:
Cal Signal Test Range: 6170 - 6821 Start Ch: 1
PASS
6545.0 6544.0 6561.0 6554.0 6550.0 6556.0 6548.0 6549.0
6564.0 6548.0 6558.0 6554.0 6554.0 6552.0 6554.0 6556.0
6561.0 6553.0 6559.0 6554.0 6559.0 6553.0 6551.0 6524.0
6532.0 6527.0 6523.0 6534.0 6535.0 6533.0 6538.0 6534.0
6570.0 6565.0 6573.0 6531.0 6529.0 6531.0 6519.0 6523.0
6526.0 6536.0 6529.0 6513.0 6503.0 6523.0 6516.0 6563.0
6536.0 6525.0 6527.0 6534.0 6523.0 6515.0 6524.0 6509.0
6526.0 6522.0 6534.0 6528.0 6527.0 6531.0 6508.0 6533.0
I do not need to set CB to ' ' before getting the clipboard on each pass of the loop do I?

I'm in trouble with copy paste some text from Word to DW mx 2004

I'am a new developer in webdesign. I'm doing my first site to
a cliente. I'm in trouble with copy paste some text from Word to DW
mx 2004. In the Edit / Preferences / General category i have the
spelling dictionary in Portuguese (Brasilian). If I wrote the text
in Portuguese directly from DW i can see the letters with ( ç
ã é ... ) and in the browser testing ( IE 6.0.2 with sp2
and FireFox 1.0.7 ), but with copy paste from the text in Word in
Portuguese when i bring it to DW i can see the ( ç ã
é ... ) in the beginnig but in the Browsers testing i can't,
and then after a while i lose the ( ç ã o ...). Can
anyone help me !?
I need the work finish in next monday. Thanks a lot.

Your line breaks will most likely be incorrect if you don't turn on the Japanese Composer.
It is almost absolutely impossible to accomplish your goal without having a font - any font - installed on your system that has that glyph. However, if it's showing up in Word, than means that you must have that glyph installed, right? What font are you trying to use in InDesign? You might already know that Word will auto-substitute fonts when it encounters a missing glyph, so we really don't know what font is being used to render that one glyph. The whole sentence might be in MS Mincho but one glyph might be pulled from another font if MS Mincho doesn't have that glyph.
That being said, you're going to break it if you don't know how to set Japanese type in ID. It's not something where you can just copy text out of email and paste into your English layout.

Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar

Hello to you
I have download game apps fifa 2014 from the app store of windows 8.1 32x on my laptop.
However, the game started to the mane screen and stopped suddenly.
The window of the game minimized to the manager toolbar on desktop and win I click on it the game work from the beginning and stopped like the first time and didn't work
Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar
   System Information Report
عام
                نظام التشغيل        Microsoft Windows 8.1 Pro
                المعالج المركزي        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                اسم المستخدم        amjad
العرض
                وصلة الفيديو        Intel(R) HD Graphics 3000
                ذاكرة الفيديو        1.15 GB
                دقة الشاشة        1366 x 768
التخزين
                إجمالي الذاكرة        2.67 GB
                الذاكرة الحرة        1.05 GB
                مساحة القرص الصلب        296.54 GB
                المساحة الحرة        176.65 GB
I/O
                الفأرة        Samsung PS/2 Port Input Device
                لوحة المفاتيح        Standard PS/2 Keyboard
نظام الكمبيوتر
                اسم الكمبيوتر        SUMSUNG-I3
                اسم المستخدم        [email protected]
                المنظمة        N/A
نظام التشغيل
                اسم نظام التشغيل        Microsoft Windows 8.1 Pro
                إصدار نظام التشغيل        6.3.9600
                معرّف المنتج        00261-50000-00000-AA602
                وقت تشغيل النظام        17/06/2014 23:34:21
                إصدار الأنترنت إكسبلورر        11.0.9600.17126
                DirectX إصدار        DirectX 11
                OpenGL إصدار        6.3.9600.16384 (winblue_rtm.130821-1623)
الريجستري
                أقصى حجم        682 MB
                الحجم الحالي        104 MB
                الحالة        OK
المعالج المركزي
                اسم المعالج        Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
                اسم الكود        N/A
                المنتج        GenuineIntel
                السرعة الحالية        2200 Mhz
                أقصى سرعة        2200 Mhz
                Voltage        1.2V
                الساعة الخارجية        100 Mhz
                الرقم التسلسل        BFEBFBFF000206A7
                معرّف المعالج        x64 Family 6 Model 42 Stepping 7
                مأخذ التوصيل        CPU
                L1-Cache        64 KB
                L2-Cache        256 KB
                L3-Cache        3072 KB
اللوحة الأم
                الطراز        300E4A/300E5A/300E7A
                المنتج        SAMSUNG ELECTRONICS CO., LTD.
                الرقم التسلسل        123490EN400015
                BIOS اسم        Phoenix SecureCore-Tiano(tm) NB Version 2.1 01QA
                BIOS منتج        Phoenix Technologies Ltd.
                SMBIOS إصدار        01QA
                BIOS تاريخ        05/09/2011
BIOS ميزات
                PCI is supported        نعم
                BIOS is Upgradable (Flash)        نعم
                BIOS shadowing is allowed        نعم
                Boot from CD is supported        نعم
                Selectable Boot is supported        نعم
                EDD (Enhanced Disk Drive) Specification is supported        نعم
                Int 5h, Print Screen Service is supported        نعم
                Int 9h, 8042 Keyboard services are supported        نعم
                Int 14h, Serial Services are supported        نعم
                Int 17h, printer services are supported        نعم
                Int 10h, CGA/Mono Video Services are supported        نعم
                NEC PC-98        نعم
                ACPI supported        نعم
                USB Legacy is supported        نعم
مورد الذاكرة
                إجمالي الذاكرة        2.67 GB
                الذاكرة المستخدمة        1.62 GB
                الذاكرة الحرة        1.05 GB
                استخدام الذاكرة        60%
الذاكرة الفعلية
                صرف الذاكرة        BANK 0
                الوصف        Physical Memory 0
                محدد الجهاز        ChannelA-DIMM0
                المساحة        2.00 GB
                السرعة        1333 Mhz
                المنتج        Hynix/Hyundai
                عرض البيانات        64 bit
                نوع الذاكرة        Unknown
                عامل النموذج        SODIMM
الذاكرة الفعلية
                صرف الذاكرة        BANK 2
                الوصف        Physical Memory 2
                محدد الجهاز        ChannelB-DIMM0
                المساحة        2.00 GB
                السرعة        1333 Mhz
                المنتج        Hynix/Hyundai
                عرض البيانات        64 bit
                نوع الذاكرة        Unknown
                عامل النموذج        SODIMM
الأقراص الصلبة
                الاسم        SAMSUNG HM321HI
                نوع الوسائط        Fixed hard disk media
                الحجم الكلي        298.09 GB
                نوع الواجهة        IDE
                عدد الأقراص        3
                إجمالي الأسطوانات        38913
                إجمالي الكليّة        255
                إجمالي القطاعات        625137345
                مجموع المسارات        9922815
                المسارات لكل اسطوانة        255
                بايت لكل قطاع        512
                قطاعات لكل مسار        63
                S.M.A.R.T دعم        نعم
                درجة الحرارة الحالية        0C (32F)
CD-ROM Drive
                الاسم        TSSTcorp CDDVDW SN-208BB
                القرص        E:
                معدل النقل        -1
                الحالة        OK
IDE تحكم
                الاسم        Standard SATA AHCI Controller
                المنتج        Standard SATA AHCI Controller
                الحالة        OK
وصلة الفيديو
                الاسم        Intel(R) HD Graphics 3000
                معالج فيديو        Intel(R) HD Graphics Family
                المنتج        Intel Corporation
                فيديو فن العمارة        VGA
                DAC نوع        Internal
                حجم الذاكرة        1.15 GB
                نوع الذاكرة        Unknown
                وضع الفيديو        1366 x 768 x 4294967296 colors
                معدل التحديث الحالي        60 Hz
                إصدار التعريف        9.17.10.3347
                سجل الأحداث        29/01/2014
جهاز العرض
                الاسم        Generic PnP Monitor
                ارتفاع الشاشة        768
                عرض الشاشة        1366
                الحالة        OK
Ethernet
                اسم المنتج        Realtek PCIe GBE Family Controller
                اسم الخدمة        RTL8168
                المنتج        Realtek
                MAC عنوان        NULL
Wi-Fi
                اسم المنتج        Intel(R) Centrino(R) Wireless-N 130
                اسم الخدمة        NETwNs32
                المنتج        Intel Corporation
                MAC عنوان        DC:A9:71:7A:A9:3B
Local Area Connection
                اسم المنتج        TAP-Windows Adapter V9
                اسم الخدمة        tap0901
                المنتج        TAP-Windows Provider V9
                MAC عنوان        NULL
أجهزة الصوت
                الاسم        صوت الشاشة من Intel(R)‎‎‎
                المنتج        Intel(R) Corporation
                الحالة        OK
الفأرة
                الاسم        Samsung PS/2 Port Input Device
                المنتج        ELAN
                الأزرار        0
                الحالة        OK
لوحة المفاتيح
                الاسم        Standard PS/2 Keyboard
                الوصف        Enhanced (101- or 102-key)
                وظائف المفاتيح        12
                الحالة        OK
USB أداة تحكم
                اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
                المنتج        Intel
                بروتوكول معتمد        Universal Serial Bus
                الحالة        OK
USB أداة تحكم
                اسم المنتج        Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
                المنتج        Intel
                بروتوكول معتمد        Universal Serial Bus
                الحالة        OK

http://apps.microsoft.com/windows/en-us/app/fifa-14/e89c9ccf-de94-45ed-9cd4-7e11d05c3da4
System requirements
OS: Windows 8
CPU: 1.8G core2duo
RAM: 1G
GPU: NVidia card 7800 GT+ with 512M+ vram
This game is not fully optimized to work with some ATI GPU cards.
Keyboard support is not available.
try to contact game manufactured, maybe your GPU doesn't meet requirement

Scribble some text on the image

i am developing one application in applet.for my application i need to scribble some text on the image.the scribble text must displayed on the image when ever i open the image

We do not support this functionality. I suspect you are talking about watermarking?
I would suggest you send a message to [email protected] , the product manager for interMedia and describe your application. This would be helpful in defining future requirements. He may also know of partners that can supply this technology.
You can add text to an image using JAI or some other packages before the image goes into the database, or when it goes out.
Larry

Standard text in the Window not Printing...

Hi,
I have two pages in a scripts . In the First page I have 10 windows.But in the windows section , I have total 18 windows.
In the windows sections i have a window with name ' WINDOW3'. But it is not there in the Page windows menas it is not there in the First page. But the data is coming.
in the same way , I have one more window 'WINDOW4'. It has standard text. it is also not there in the first page of Page windows. It is not printing.
Why the Standard text is not printing ?
The same Standard text is printing in another script..
Paragraph format ever thing is good ...
if the window is not there in the page window , will it print or not ..?
Regards,
satya.

Hi,
Even though the Window is not there in Page windows, it is printing for some windows like window4.
Why it is happening ...?
Layout is customized but print program is stanadard...
Regards,
satya.

Strange output generated after pasting some text into a reply

Posted the following answer just now :
http://social.technet.microsoft.com/Forums/en-US/a476247a-47ea-4545-ba26-2ba89595bba3/cannot-create-password-after-installation-windows-server-2012?forum=virtualserver
in which I pasted a chunk of text from the TechNet article I was directing someone to. Looks like something within that text has mangled the output as it's misformed (notice a line above the pasted text which wasn't there when I wrote the message), and I
now can't click the edit option to try to change / correct it, or even delete it to try again.

I submitted a request to fix the thread and submitted a bug request.
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Copy&paste formatted text from the web

Hello,
I'm from IT department. Employees graphic gave me a difficult task. They need to copy text from the web browser which is underlined, into Illustrator. The problem is that while pasting the text loses it's formatting. I found the solution about pasting the text into MS Word and then import it AI. Unfortunatly they not accept that way, the said "we need something more easy, it's possible, someone told us". Is there any other way to copy text from the web browser to illustrator with keeping format? Maybe plugins? I'm googling about 2 days about it and didn't find any other solution. Please help me.

thank you
unfortunately it's not good solution because:
1.) "omg, too much clicking, we need ctrl+c ctrl+v"
2.) They change the text, change size, color, background etc in AI. When AI imports pdf all letters looks like seperate objects (it's hard to explain for me, because I'm not familiar with AI and my english is not good enough)

Diplaying some text when the formula value is negative

Hi all,
I am calculating the date difference using the formula diff= date1- date2.
My requirement is when the diff is negative it has to displayed as # or with some text but not as zero .
Regards

You can display some random number say 999999 instead of # or text.Is that feasible ?
As # and text cannot be used for key figures.
You can create a formula like :
( diff < 0 ) * 99999 + (diff >= 0 ) * diff
Hope this helps.

PCmanFM can't copy or cut & paste some files since the recent update

Hello,
I noticed this problem since the recent update of PCmanFM.
When I try to copy/paste, or cut/paste somes files, I got the following error:
: Error stating file '/home/david/Within%20Temptation%20-%20Black%20Symphony%20%5BDisc%201%5D/Cover.jpg': No such file or directory
But, look this:
[david@desktop Within Temptation - Black Symphony [Disc 1]]$ pwd
/home/david/Within Temptation - Black Symphony [Disc 1]
[david@desktop Within Temptation - Black Symphony [Disc 1]]$ ls
Cover.jpg
Within Temptation - Forgiven [Live].mp3
Within Temptation - Hand Of Sorrow [Live].mp3
Within Temptation - Jillian (I'd Give My Heart) [Live].mp3
Within Temptation - Memories [Live].mp3
Within Temptation - Ouverture [Live].mp3
Within Temptation - Somewhere [Live].mp3
Within Temptation - Stand My Ground [Live].mp3
Within Temptation - The Cross [Live].mp3
Within Temptation - The Heart Of Everything [Live].mp3
Within Temptation - The Howling [Live].mp3
Within Temptation - The Swan Song [Live].mp3
Within Temptation - What Have You Done [Live].mp3
Am I the only one to have this problem ?

Snowman wrote:No: https://bugs.archlinux.org/task/21405
Ok. Topic can be closed, Thanks

How can add some text on the image

I have images in the gif format.
How can I add some text in specified point on the image?
Fpor example, by using Intermedia plugins?

We do not support this functionality. I suspect you are talking about watermarking?
I would suggest you send a message to [email protected] , the product manager for interMedia and describe your application. This would be helpful in defining future requirements. He may also know of partners that can supply this technology.
You can add text to an image using JAI or some other packages before the image goes into the database, or when it goes out.
Larry

Customize Basic Search iView with some text above the Search field

Hello *,
we are using the sap.km.cm.basicsearch iView for searching some things. Is it possible to write some text for description above the search field inside the iview?
Regards,
Björn,

Hi Adam,
U can add a description to the search field in the search iView by customizing the sap.km.cm.basicsearch iView.Download the PAR file from the server machine or from System Administration>support>Portal Runtime>Browse Deployment>Save the PAR file in local machine and import the same to NWDS and customize according to ur requirement.
Hope this Helps.
Regards,
Vinoth.M

Some webpages resize the window but when the window opens in a new tab, the entire firefox browser is resized. How do I stop this from happening?

This usually happens when the window is resized in order to fit the smaller content/intention for a webpage.
I would like Firefox to ignore the window resizing (down sizing) commands when opening a window in a new tab and just display the window in full size.

Go into ''Tools > Options > Content'' and next to where it says ''Enable JavaScript'', click ''Advanced...''' and then untick ''Move or resize existing windows''.
This is the only way to do it. I believe there is a bug filed to prevent all sites (by default) from resizing the window if there are more tabs open, but I don't think it has been fixed.

Multipart/form-data using HTTPService, sending a binary file and some text in the same request.

Hi There,
         I am new to FLEX and also new to writing a client for a web service.
My question is more about flex (Flash builder 4.5) APIs, what APIs to use.
I want to access a web service, that's published here.
https://build.phonegap.com/docs/write_api
here is the description of webservice
===========
1) I have to do a post on POST https://build.phonegap.com/api/v1/apps
2) content type has to be "multipart/form-data"
3) JSON bodies of requests are expected to have the name 'data'
data will be someting like this
'data={"title":"API V1 App","package":"com.alunny.apiv1","version":"0.1.0","create_method":"file"}'
4) include a zip file in the multipart body of your post, with the parameter name 'file'.
===========
I want to make a 'multipart/form-data' Post and send
one string and one zip file.
My first question to self was If i send both string + binary data in the body ...
how will server understand where string end and where zip file starts?
Then read on W3.org( http://www.w3.org/TR/html401/interact/forms.html#h-17.13.4.2 )
How is text + binary data can be sent through "multipart/form-data" post requst.
there has to be some boundries.
After this I read and example in flex and tried following it.
http://codeio.wordpress.com/2010/04/03/5-minutes-on-adobe-flex-mimic-file-upload-for-in-me mory-contents/
but it doesn't seems to be working for me.
                    public function createNewApp(cb:Function , appFile : File):void
                              var service:HTTPService = new HTTPService();
                              service.url = ROOT+"apps";
                              service.showBusyCursor = true;
                              service.addEventListener(ResultEvent.RESULT, function(e:ResultEvent):void {
                                        //translate JSON
                                        trace(e.result);
                                        var result:String = e.result.toString();
                                        var data:Object = JSON.parse(result);
                                        cb(data.link);
                              service.addEventListener(FaultEvent.FAULT, defaultFaultHandler); //todo : allow user to add his own as well
                              authAndUploadNewApp(service,appFile);
                    private function authAndUploadNewApp(service:HTTPService,appFile : File):void {
                              var encoder:Base64Encoder = new Base64Encoder();
                              encoder.encode(username + ":"+password);
                              service.headers = {Accept:"application/json", Authorization:"Basic " + encoder.toString()};
                              service.method ="POST";
                              var boundary:String = UIDUtil.createUID();
                              service.contentType = "multipart/form-data; boundary=—————————" + boundary;
                              var stream:FileStream = new FileStream();
                              stream.open(appFile, FileMode.READ);
                              var binaryData:ByteArray = new ByteArray();
                              var fileData : String = new String();
                              stream.readBytes(binaryData);
                              stream.close();
                              fileData = binaryData.readUTFBytes(binaryData.bytesAvailable); // I think this is where I have problem.... how do
                       //how do i converrt this bytearray/stream of data to string and send it in my post request's body - i guess if this step work rest should work..
                              var params: String = new String();
                              var content:String = "—————————" + boundary + "nr";
                              content += 'Content-Disposition: form-data; name="data";' + '{"title":"ELS test app 2","package":"com.elsapp.captivate","version":"12.3.09","create_method":"file"}' + "nr";
                              content += "—————————" + boundary + "nr";
                              content += 'Content-Disposition: form-data; name="file";' + fileData + "nr";
                              content += "—————————–" + boundary + "–nr";
                              service.request = content;
                              service.send();

In the past I have used URLVariables with URLRequest and URLLoader to achieve this kind of requirement.
Check out http://livedocs.adobe.com/flex/3/html/help.html?content=17_Networking_and_communications_3 .html which should be useful. My preference has always been to use this style instead of HTTPService objects, giving you a little more control which is what you need here.
Let me know if you need any more assistance.

Some text in the document is shown in reverse order (arabic or something)

Here's the link to the document https://onedrive.live.com/view.aspx?resid=D3A41CE2D04354EE!4999&cid=d3a41ce2d04354ee&app=Word&wdo=2
As you can see Word Online (and also standalone Office 2013) is showing one line (marked yellow) in reverse. This line also selects in reverse order and acts like some arabic or other RTL language. Though all text is in Lithuanian. Our employees have to
work with this document (it's a standard form) all the time. It shows fine with Office 2007, but as we have upgraded to 2013 it now shows like that and every time managers has to deal with this (copying to Outlook or other program where it copies normally
from left to right, and then back to this document). I wasn't able to find a setting to fix this text.

Yes, you can update directly using SAVE_TEXT.
Check this for the same.
[update long text in FB02|https://forums.sdn.sap.com/click.jspa?searchID=22194840&messageID=5418662]

Paste some text in the windows clipboard

Similar Messages

Maybe you are looking for