Pasteing a value into another cell

I have a formula from another cell in another page. I want to insert only the value into another cell. Paste Special / Value is what I used to choose from Excel?

In Numbers,
Menu > Edit > Paste Values.
Regards,
Ian.

Similar Messages

Insert a button that will paste a value from one cell to another

I'm hoping to be able to insert a button on a form that, when clicked, will copy the values of certain cells and paste those values into other cells on the same form.
I'm looking to insert another botton that, when clicked, will take the value in one particular cell and add 1 to the value.
Is it possible to have one button perform both actions?

I had add the code in my AMimpl method
below is my code
   ViewObjectImpl vo = this.getGlJrnlHd1();
        Row newRow = vo.createRow();
        ViewObjectImpl c1 = this.getCursorC1_1();
        Row cr1 = vo.getCurrentRow();
        System.out.println ("Curretn row:"+vo.getCurrentRow());
           System.out.println (cr1.getAttribute("GrhBu"));
        newRow.setAttribute("GjhBu", cr1.getAttribute("GrhBu"));
       newRow.setAttribute("GjhPlant", cr1.getAttribute("GrhPlant"));
      newRow.setAttribute("GjhJrnlType", cr1.getAttribute("GrvlJrnlType"));
       newRow.setAttribute("GjhJrnlNo", cr1.getAttribute("GrvlJrnlNo"));
       newRow.setAttribute("GjhJrnlSfx", cr1.getAttribute("GrhJrnlSfx"));
       newRow.setAttribute("GjhJrnlDate", "Null");
       newRow.setAttribute("GjhYear", cr1.getAttribute("GrvlYear"));
       newRow.setAttribute("GjhPeriod", cr1.getAttribute("GrvlPeriod"));
       newRow.setAttribute("GjhDesc", cr1.getAttribute("GrhDesc"));
       newRow.setAttribute("GjhAppl", "GLM");
       newRow.setAttribute("GjhReversal", "N");
       newRow.setAttribute("GjhStatus","N");
       newRow.setAttribute("GjhCreBy", "NULL");
       newRow.setAttribute("GjhCreDate", "NULL");
       newRow.setAttribute("GjhUpdBy", "NULL");
       newRow.setAttribute("GjhUpdDate", "NULL");
       this.getTransaction().commit();

How can i copy and referencing the value of a sub-total of a category into another cell?

How can i copy and referencing the value of a sub-total of a category into another cell?

Cells in Category rows 'exist' only when those categories are inserted using the Reorganize table. Those cells cannot be referenced from other cells.
If you want a category summed, you will need to do that in a cell that is still visible when the table is not sorted into categorie using the Reorganize pane. The function to use is SUMIF. You can find information regarding SUMIF (and SUMIFS) in the iWork Formulas and Functions User Gude. The guide may be downloaded using the link in the Help menu in Numbers '09.
Regards,
Barry

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

Can conditional formatting refer to the value in another cell

Is there a way for conditional formatting refer to the value of another cell instead of entering the value in the conditional format box?

wwjd is right. no way of doing that.
WWJD, two wuestions:
1) do you have the new office 2008 for mac beta (is it out?), how close is it to the new features in Office 2007 for windows, if you do?
2) why do our pictures keep getting cut off after a day of posting. I posted a pic yesterday and its already not showing on the page the next day. Do they not load them after the question is marked as solved?
thanks,
Jason

How to copy one column BLOB value into another column of another database.

How to copy one column BLOB value into another column of another database.
BLOB value contains word document.
I thought of copy the BLOB value into a text file and then update the new column value by the same text in textfile. Will this work?
Is there any other better way to do this?

You're welcome
BLOB fields contains binary data. I don't think you can do this
Also if I view the BLOB as text. Can I copy it and insert into the new database.
I think your options are as I said. Datapump or CTAS
Best Regards

Authorisation - Pasting of values into AUTH fields

Hi Friends,
I am working on 4.6c version - Authorisation under PFCG (Role maintenance). Is it possible to paste >8 values into the AUTH fields of an authorisation object in a single shot?
If so, kindly share the solution.
Regards,
Vijay

>
vj vijay wrote:
> Hi Friends,
>
> I am working on 4.6c version - Authorisation under PFCG (Role maintenance). Is it possible to paste >8 values into the AUTH fields of an authorisation object in a single shot?
>
> If so, kindly share the solution.
>
>
> Regards,
> Vijay
Hey Vijay,
you sound like a man on the mission - want everytihng done in a SINGLE SHOT
I am not sure if i understand your requirement correctly, but my infernce is that you want to copy data from clipboard to the object values with little / no effort........(prime criteria )
Well, have the values listed one below the other in a notepad, copy them ctrl+C and in SAP have the quick cut and paste option active.
Now go to the object values and right click - you will have 7 rows of data copied, if you want more - repeat the exercise
If you want to reach the moon, you have to pass-by some stars as well (Dumb and in-appropriate quote - I KNOW)
If my understanding of the discussion is wrong - Blame it on the Monday morning Blues...............and have fun

Drag the contents of a cell and drop it into another cell

dear frankson,
pls send the source code for drag the contents of a cell and drop it into another cell.

When I drag and Drop on a Mac (OS 10.2.3), the OS
builds a transparent image of the component being
dragged and uses it instead of the default cursors.
This wouldn't be a big problem except that the
component it renders is the ENTIRE spreadsheetThis is the default behavior on Mac. You can manually set the dragimage in startdrag(...) in dragGestureRecognized(). So you just need to create an image of what your are actually dragging.
If you simple want to remove the image just set it to some 1x1 pixel image or a transparent gif...

Copying a cell /results/ into another cell

i have a set of totals in different sections and i want to COPY this number result so that it actively updates in the destination cell. the originating cell is a SUM of about ten items above it and when i simply copy and paste this origination cell into the destination cell the destination cell wants to SUM up the ten cells above /it/.
i am using "numeric" for all my cells and i am wondering if i need to change the destination cells to some other format so that it will simply accept the final number but i also want to make sure this destination cell will UPDATE when the origination cell changes.
any advice please and/or search terms for this operation?
i've gotten backed up by weeks getting OCD (and a little carpal tunnel) with my formatting so i am trying to close out the learning curve on this effort ASAP before going back in and studying documentation on numbers 3.0.
THANK YOU for any help with this.

HW,
you are thinking of how data flows backwards. you are thinking that copy takes the result from a cell, when, in fact, it takes the formula OR the value (if it is not a formula). To "get" the value out of a cell you refer to that cell from another cell-- thereby "pulling" the result out of the cell.
The search terms woudl be "cell", "reference"
In the destination cell (the cell where you want a /COPY/ type the equal sign, then click the cell where the sum resides (even if its in another table, or another sheet).
If you you do not want to try the click method, then you can type the reference as follows:
assume the cell where the sum resides is
Sheet 1
Table 1
cell A20
Then in the cell where you want the /COPY/ type:
"=Sheet 1 :: Table 1 :: A20" without the double quotes
All the best.
Wayne

Copy and paste layer mask into another layer mask

I know there is a way to do this.
How can I copy and paste on layer mask into another.
I need to use the same mask for multiple layers and images.
Thanks

In the same document, click on the layer mask, option drag to a new layer
To copy mask to a different document with both documents open, select the layer, Duplicate Layer to the other document (destination). Then in the other document, option drag the mask to whatever layer you want, delete the layer you duplicated (you don't need it anymore, you just needed the mask)
Or to copy mask to a different document with both documents open, load mask as a selection. Save selection to the other document (destination). Then in the other document load the new alpha channel and apply as a layer mask. Delete the alpha, you don't need it anymore.
Edit: J always beats me to it

Passing function value into another procedure

Hi
From this package the value returned by the function " FIRST " needs to pass into another procedure as parameter in the same package, how could i do that in a better way.Oracle Version 8.1.7.4.0.
CREATE OR REPLACE package body PKG_CUST_CHECK is
FUNCTION FIRST(P_PARMS in varchar2) return varchar2 is
l_parms varchar2(62) := P_PARMS;
BEGIN
SECOND(l_parms);
     return(l_parms);
END;
PROCEDURE SECOND(P_PARMS in out varchar2) is
L_CUST Varchar2(30);
BEGIN
SELECT P_CUST INTO L_CUST FROM TABLE_A WHERE ROWNUM=1 ;
THIRD(P_CUST in VARCHAR2,
P_PARMS_VALID out VARCHAR2,
P_OK_FOR_CUST out VARCHAR2,
--Here the output of the above procedure will be concatinate and Return ;
END CUST_CHECK;
end PKG_CUST_CHECK ;
Thanks

sorry for the confusion, not sure whether it will be clear enough.
the requirement is function "FOURTH" should get the value returned
by the function "FIRST" as in parameter value.
[ code ] CREATE OR REPLACE package body PKG_CUST_CHECK is
FUNCTION FIRST(P_PARMS in varchar2) return varchar2 is
l_parms varchar2(62) := P_PARMS;
BEGIN
SECOND(l_parms);
return(l_parms); --here the value which is returning is updated one by the THIRD procedure
END;
PROCEDURE SECOND(P_PARMS in out varchar2) is
l_parms varchar2(62) := P_PARMS;
BEGIN
--the procedure THIRD will get the parameter values after
--extracting the values from l_PARMS by another function EXTRACT
THIRD(P_CUST in VARCHAR2,
P_PARMS_VALID out VARCHAR2,
P_OK_FOR_CUST out VARCHAR2,
return;
--Here the output of the above procedure will be concatinate and Return ;
END CUST_CHECK;
FUNCTION FOURTH(P_PARMS in varchar2) return varchar2 is
l_parms varchar2(62) := P_PARMS;
BEGIN
--the procedure FIFTH will get the parameter values after
--extracting the values from l_PARMS by another function EXTRACT
FIFTH(P_CUST in VARCHAR2,
P_PARMS_VALID out VARCHAR2,
P_OK_FOR_CUST out VARCHAR2,
return;
--Here the output of the above procedure will be concatinate and Return ;
END CUST_CHECK;
end PKG_CUST_CHECK; [ /code ]

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

Putting calculated value into another application

Hi,
I have an HCM application with the following simple HRAccount dimension.
ALL_HR_ACC
     |___SALARY
     |___BONUS
     |___OT
I want to put the value of ALL_HR_ACC into TstAccount.HRExp, which is in another application called TstFinance. This can be perfectly done by the following code.
*DESTINATION_APP=TstFinance
*SKIPDIM=Employee
*RENAME_DIM HRAccount=TstAccount
*WHEN HRAccount
   *IS SALARY,BONUS,OT
       *REC(FACTOR=1,HRAccount="HRExp")
*ENDWHEN
However, if I change the IS statement to the following, nothing will happen.
   *IS ALL_HR_ACC
In this simple example, I don't mind putting all 3 HR accounts SALARY,BONUS,OT. However, in many situations, SALARY and other HR accounts are derived from other accounts as well. It could be very cumbersome to put the whole bunch of calculation into the script for just transferring the single value of ALL_HR_ACC into another application.
Anyone could give me any advice on this? Somebody told me using EVGTS could easily do the trick. However, such functions or formulas will disappear when I expand the worksheet.
Thank you!
Sunny

Sunny,
The script behavior is correct. Script logic basically only works with the base memebrs, unless you utilize the statement called Calc Dummy Org. This statement acts like a variable and aggregates the values into a "parent" type value to be passed on or used in a REC statement. But, the process you used for the purpose you have is the best, fastest method, even if it is a scope of 50 base accounts from a select statement.
As for using an input template or excel; if you have an evdre expansion input template, and wish to send the values to a different cube, just add another EVDRE, but remove all the expansions. Make the page key range fixed or based on the other EVDRE statement. Use excel to relate to the account to be sent to the parent account. It should be quite simple to send the total values to a summary cube from the same template that is used for the input process. However, the logic you wrote accomplished the same effect.
Hope this helps.

I am unable to copy and paste a photo into another event;

and if I duplicate the picture in one event, and then highlight one,; cut and paste into another it moves both pictures into the other event even though only one was selected. Any advice please?

This has been reported before.
IPhoto menu -> Provide iPhoto Feedback and report it too.

I want to place the value of a cell into another cell of diffrent field

i want to place the entity of "Name" column "TAYMOOR NASIR" in "Fathers_Name" column of "KHIZAR KHAN", how can i do it. waiting......

May be:
;with cte as (select T.*, Prev.Name as [New Father's Name] from Ancestory T
CROSS APPLY (select top (1) * from Ancestory T1 where T1.RollNumber = T.RollNumber - 1 order by [Roll Number]) Prev
WHERE [Farthers_Name] IS NULL)
--select * from cte -- uncomment this to check
UPDATE cte SET [Fathers_Name] = [New Father's Name]
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Pasteing a value into another cell

Similar Messages

Maybe you are looking for