Pasting table again--not enough cells

Hi,
I am trying to paste a complicated table from one page into
the cell of a table on another, but I get the error message:
"Cannot complete the paste. The table does not have enough
cells to paste the clipboard."
Stranger yet, I tried cutting the cells then pasting them
right back in to the same table without moving the cursor and got
the same message.
Can anyone tell me what's going on and offer suggestions
about how I might be able to fix it?
Thanks.

No doubt the table that you are copying to the clipboard is
munged. Can you
show us?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"TomMaddox" <[email protected]> wrote in
message
news:er08a1$m2q$[email protected]..
> Hi,
>
> I am trying to paste a complicated table from one page
into the cell of a
> table on another, but I get the error message:
>
> "Cannot complete the paste. The table does not have
enough cells to paste
> the
> clipboard."
>
> Stranger yet, I tried cutting the cells then pasting
them right back in to
> the
> same table without moving the cursor and got the same
message.
>
> Can anyone tell me what's going on and offer suggestions
about how I might
> be
> able to fix it?
>
> Thanks.
>
>

Similar Messages

SAP Bex: Not Enough cells to display result

Hi,
In BW 3,5 Analyzer, if user typed some values next to the reported columns and then tried to drill down on columns say characteristics profit center, the system used to display a message with options like below:
''SAP Bex: Not enough cells to display result
-TO extend the result areas to the right:
0 Overwirte the existing cells
0 insert cells next to the results area
0 insert entire columns''
After upgrading the query to 7.0, the Analyzer does not pop-up this information and it simply overwrites the existing cells.
Can you please advise, if there are some settings in BI 7.0 which can enable pop-up of this information window with above options?
Please suggest.
Best Regards,
UR

Hi,
Try setting the cells which are not to be overwritten as formulas and refreshing them which may not overwrite those cells.
Thanks,
Arun

How to paste style on whole table and not one cell at a time?

Hi,
I am copying a style and then trying to paste it on a whole table, but it will only allow me to paste the style on each cell separately, and it takes a long time.
Is there a way to paste a style on the whole table?
Thanks,
Shani

Hi Peter,
I am creating shipping labels.
My table is divided like the paper labels in my printer.
I am copying each address directly from my browser (each address on one cell). After I copy all the addresses, I adjust one them to: avenir font 9.5 pt, indents 0.5 first etc, and then I paste this style on each cell separately.
Is there a way to paste the style all together in one time? (I am making shipping labels every day so it is not a one time thing).
Thanks!
Shani

RH8 table lines not behaving in new style

We want our table style to be solid black lines, 1 pt in width, 3 pts padding all around. The new default in RH8 is the classic HTML style instead of the 1 pt black lines from RH7...!
So I created a style for Tables in my custom style sheet and even though I select 'all borders' in the drop down with black 1pt lines I only seem to be affecting the table border, not the cells. ??
When I try selecting Horizontal or Vertical borders, I lose lines...not gain them. How do I set this for all cell borders/table boarders and make it work?
Thank you very much!

Just a thought...which may or may not help.
Have you tried using the "SimpleGridBlack" table template that comes with RH8? If you haven't already, you can apply it via Table Styles. Be sure to click Clean Table Inline Formatting to get rid of preexisting definitions. To get the results you describe, I had to manually apply this style to each table when converting from RH7 (a huge, albeit mindless, pain), but once that's done, you can reformat all tables on the fly simply by updating the Table Style definition.

Ipad 2 - there is not enough memory available message in itunes when photo are sync. Help !

Hi there,
When i sync my Ipad 2 with Itunes , as soon as it gets to the 5th step ( sync Photos ) it says that there is not enough memory available.
Even if it has half of the memory available.
Help !
Thank You

Charammmmmm ! FOUND IT ( more or less ) !
After i created a folder inside another folder with all the photos it finally synced perfectly !
The main Folder is on my desktop and i have inside it another folder with every 171 Photos.
But this isn´t normal someone should fix this permanently because i added 3 more photos and there it
was again " not enough memory..bla..bla...bla"
Thank you very much for your help anyway.
Cheers everybody !

Could not complete the paste command because there is not enough memory (RAM)

Hi,
Anybody can help me please? i am getting this message again and again. i tried to restart system and re install Photoshop no luck.
"could not complete the paste command because there is not enough memory (RAM)"
will be great if i get reply asap.
Thanks,
Zia

There are no mind readers or clairvoyants in these user forums. Give us a break and provide plenty of details.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Table can not activate again after changing

Hi, everybody
For some reason that we create one more field call EKORG(Purchasing organisation) in table LFA1 and made choice for both Key and Initial value. Now, we are going to delete this field and activate table again, system show the following message, please kindly give us a hand and let me know how to solve this issue in more detail. We use T-code: se14 and try to Activate and adjust database that system show the same message as below.
Thanks you All.
<b>Primary key change not permitted for value table LFA1
Message no. AD300
Diagnosis
This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
Procedure
If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
If necessary, maintain the deleted foreign keys again.</b>
Message was edited by:
Alfred

Alfred,
If you can't figure this out you should stop what you are doing and get help from someone who knows how to fix this mess. I'll give you a hint, it isn't Programs... And it might be something to do with tables... Once you've got a list of all tables where LFA1 is used you will have to check them 1 by 1 to see if they use LFA1 as a check table.
I'd still love to know what posessed you to mess around with the primary key of a standard SAP table? And I'd also love to know why everyone is giving you help and suggestions on how to activate the table whilst no-one seems to care that you are changing a standard SAP primary key. I can't believe you managed to get an access key to change the table in this way and no-one in your company/client questioned what and why you were doing it!
LFA1 is a pretty important table in the SAP system (Vendor Master table) so to mess around with its primary key is utterly ridiculous.
The only thing you should learn here is that changing SAP standard objects is usually a no-no. Trying to change the primary key on a standard SAP table is a complete no-no. There must have been an alternative to whatever it is you are trying to achieve.
Gareth.

1.) How do I organized my photo album on my ipad? 2.) How do I remove an album on my ipad? 3.) i have taken over 1,000 photos on ipad, now it won't sync stuff to the ipad because it said there is not enough space. I want to delete some past synced p

1.) How do I organized my photo album on my ipad?
2.) How do I remove an album on my ipad?
3.) i have taken over 1,000 photos on ipad, now it won't sync stuff to the ipad because it said there is not enough space. I want to delete some past synced photos from the computer to create space, but I don't know how to find it on computer. It sycned a portion of a file onto the ipad which is useless to me so I want to delete it all & start fresh.
4.) I was thinking about copying some of those photos over so it would show up as new data maybe then it would sync to my ipad as a new & competed album. Or will this create more problem because it would only be creating more photos?
5.) By the way, I don't know how to use dropbox or anything like it, so I take photos of some files & web screen that I use regularly to always have access regardless of internet access. That is why I have so many photos. But I want to be able to separate & organized them by files, web screens, or topics. I also want to be able to delete & update as needed.
6.) If needed I am willing to delete 4 G of downloaded app to create space. Will this help the space issue? Also could I just leave the downloaded app to my computer only & only sync to to ipad as needed, since I don't need app as regularly. I NEED "photo" ALL of the TIME! I am out in the field, instead of carrying stack & stack of papers, I carry ipad with photo of these daily needed papers!

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Issue with turning on project 2010 / 2013 - "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."

I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.

This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine.

TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

How do i set the background of the table( not of cell / row / column).

How do i set the background of the table( not of cell / row / column).
What happens when i load the applet the table is blank and displays the background color is gray which we want to be white.
We tried using the setBackGround but it is not working maybe we are not using it properly. Any help would be gr8.
Thanks in advance.

I don't understand very well, but i guess that the background is gray when the table content's empty, isn't it?
When the table model is empty, the JTable doesn't paint, so its container displays its background (often gray).
In this case, what you must do is force the table to paint, even if the model is empty. So, you have to create your own table and override three methods :
public class MyTable extends JTable
//specify the preferred and minum size when empty
myPreferredWidth = 200;
myPreferredHeigth =200;
myMinimunWidth = ...;
myMinimunHeigth = ...;
public Dimension getPreferredSize()
if(getModel().getRowCount() < 1)
return new Dimension(myPreferredWidth, myPreferredHeigth);
else
return super.getPreferredSize();
public Dimension getMinimumSize()
if( getModel().getRowCount() > 0)
return new Dimension(myMinimunWidth, myMinimunHeigth);
else
return super.getMinimumSize();
protected void paintComponent(Graphics g)
if (getModel().getRowCount<1 && isOpaque()) { //paint background
g.setColor(Color.white);
g.fillRect(0, 0, getWidth(), getHeight());
else super.paintComponent(g);
}

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

Do you mean you want to retain the formatting from Pages, or retain formatting already applied in ID?

My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?

My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?

Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Not enough memory to run Microsoft Excel. Please close other applications and try again.

Hi All,
I have windows 7 SP1 64 bit machine with 8 GB of RAM. and have office 365 pro plus installed on it. I use windows explorer preview pane a lot and suddenly it has stopped working. Whenever I click on any excel, power-point, word file with the preview pane
enabled it gives me the error as below:
for Excel: Not enough memory to run Microsoft Excel. Please close other applications and try again.
For Power point: there is not enough memory or system resources to start power point.
However the file opens fine when I double click it. I have tried the following"
1. Repaired, re-installed office 365 pro plus.
2. Disabled, enabled and changed virtual memory page file size. It did not make any difference.
3. Have verified folder and search options and they are fine for the preview pane.
Is there anything we can do about it?

Since we were unable to reproduce in my test machine, we were unable to determine the root cause of the problem. This seems to be happening when Windows is trying instantiate the Office application for the preview in the Preview pane, if the repair
Office still doesn't work, we might turn our mind onto Windows OS level.
Here is my suggestion:
1. Disable all of security programs or Anti-virus on that machine.
2. Disable DEP.
3. If you installed any video or graphic codec programs, please temporary to remove them to check the result.
Feel free to post back.
====================
I've summary the Symptom as following:
When trying to open files from a file share using Microsoft Office 2013 via Windows Explorer, we're see the following messages in the respective Office apps (see below). However, after clicking OK in the respective dialog, the Office files open from
the share as expected.
Microsoft Word
Sorry, something went wrong and Word was unable to start. (24)
Microsoft Excel
Not enough memory to run Microsoft Excel. Please close other applications and try again.
Microsoft PowerPoint
There's not enough memory or system resources to start Microsoft PowerPoint.
The issue does not happen if we navigate to the same file via the File > Open dialog.
Tony Chen
TechNet Community Support

Microsoft word there is not enough memory or disk space to complete this operation when pasting picture

on macbook air getting error in word: 'there is not enough disk space or memory' when trying to paste picture

How big is the picture? How much free space does your hard drive have? Is your document saved on your computer's hard drive or on a network share?
Sorry that I only have questions but the information really could be important - the only explanation(s) for the error message you have are bound up in those questions.

Pasting table again--not enough cells

Similar Messages

Maybe you are looking for