Patch Selection in Logic 8?

I have a number of midi devices I still use in production. I have been slow to upgrade to Logic 8 because I don't want to lose use of all my gear. How do I set up the new environment in Logic to select patches from within Logic?
I'm already aware of my need to upgrade to new power book as well.Thanks in advance,-BigShiid

Plugins are pre-fader.
That means if you use a plugin to limit to 0dBFS, changing the fader simply offsets that - it adds of subtracks gain to that audio data coming out of the plugins.
You should leave the fader at 0dBFS of you want to keep the gain where the plugin limits it to.

Similar Messages

How to extend dynamic selection for Logical Database PNPCE

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Can you download a FormsCentral response as a pdf without having non-selected skip logic rules saved/viewed?

Can you download a FormsCentral response as a pdf without having non-selected skip logic rules saved/viewed?

Hi,
Unfortunately, it is not possible to convert the response to pdf without the non-selected fields.
As a workaround, you can hide a particular column and then convert the response to pdf.
Regards,
Nakul

I can't get the patch select buttons to work in edit mode.

I can't get the patch select buttons to work in edit mode. When I select any template, the set buttons or the patch buttons don't work at all. My up and down arrows work fine but I need the on screen buttons to be assigned to my footswitch.

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

Patch Selection Lists?

Can anyone assist me in figuring out how to set up the environments in the new Logic to be able to select patches from select lists?
I would appreciate any help or advice anyone could provide.
Thanks,
-BigShiid

Hello,
You can do it using Javascript, but did you take a look to Oracle ADF Faces Components? They contains lot of components, and one of them the Shuffle will do what you want.
- ADF Faces Components List
- JSF OTN Page
Regards
Tugdual Grall

How to Import Yamaha Motif XS 8 Patch Names into Logic?

Hello -
I am a new user of MAC plus Logic. I just installed Logic Studio with Apogee ensemble. The virtual instruments are working great and I am able to browse the patch names by banks and catagories. Just downloaded a logic patch file from yamaha site for my Motif XS 8 Synthesizer. The has a .LSO extention. When I click on the file, the logic environment window opens up and I can see the patches. How do I import these patches into my project environment.
Any help on this will be greatly appreciated.

Open up the source song, the one you downloaded with the environment (old Logic songs were *.lso files).
You'll probably see an environment window, showing a multiinstrument - it's this that has the bank messages and the patch names defined.
Select the multiinstrument, and edit -> copy.
Now close that song.
Open up your default startup template song (the "destination" song), open the environment on a layer of your choosing, and select edit -> paste, to paste that multi-instrument into the environment of this song.
Change the MIDI port on that multi-instrument so it's sending to the port your hardware is connected to. Close the environment window, and resave the song as your startup template.
(You may wish to preassign the 16 multi-instrument sub MIDI channels to arrange tracks if you are regularly sequencing them, to save time so these are already assigned to tracks when you start.)
Now for every song you start, it will have your setup for the Motif.
Does that help?

Selection-screen logical database PCH

Hello!!
   I need click a pushbutton (key date) on a selection screen of a logical database (PCH) before the programm is executed.
Regards.

For a ABAP I used this "quick and dirty" solution:
*Add selectoption (or in your case button)
SELECT-OPTIONS s_ssl FOR iooper-ssavd.
INITIALIZATION.
perform hide_selection_screen.
AT SELECTION-SCREEN output.
perform hide_selection_screen.
FORM perform hide_selection_screen.
LOOP AT SCREEN.
    IF screen-name CS 'S_WERK'.
      MOVE '0' TO screen-active.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDFORM perform hide_selection_screen.
You can hide all required radiobuttons by adding them to the loop. The buttonclick can be catched at the previous mentioned event.

How to pass dynamic selection to logical databse using ldb_process function

dear friends,
can anybode tell me how to pass dynamic selection to the logical database when i m using LDB_PROCESS function module. however, in EXPRESSIONS paramter of the function module i m passing the selecti-option, it is passing their also but when i used more than two select-option or paramter it throw an exception FREE_SELECTIONS_ERROR.
SO PLEASE GUIDE ME HOW TO PASS MORE THAN TWO SELECT-OPTION IN LOGICAL DATANSE DYNAMICALLY USING LDB_PROCESS.

would be nice if you post the answer to all

Html:select inside logic:iterate

hi,
I am having a string type corresponding to the select attribute in my form bean. Since this select tag is inside the logic:iterate all the names of the select boxes are same. i.e myLabel in this context. So, how can i set the value to select box. do i need to change the data type for labelValue in form bean.
my form bean is given below:
here the listTotal is the total of the combo and listValue is the individual combo
     public ArrayList listTotal;
     public Collection getListTotal()
          return (Collection)listTotal;
     public void setListTotal(ArrayList total)
          this.listTotal = total;
     public ArrayList listValues;
     public void setListValues(ArrayList values)
               this.listValues = values;
     public ArrayList getListValues()
          return listValues;
                     String myLabel;
     public String getMyLabel()
     return myLabel;
     public void setMyLabel(String myLabel)
     this.myLabel = myLabel;
And i m setting the values in the action class
          ArrayList listTotal = new ArrayList(1);
          ArrayList listValues = new ArrayList();
          listValues.add(new LabelValueBean("k1", "Value1"));
          listValues.add(new LabelValueBean("k2", "Value2"));
          listValues.add(new LabelValueBean("k3", "value3"));
          listTotal.add(listValues);
          listValues = new ArrayList();
          listValues.add(new LabelValueBean("l1", "Value4"));
          listValues.add(new LabelValueBean("l2", "Value5"));
          listValues.add(new LabelValueBean("l3", "value6"));
          listTotal.add(listValues);
          listValues = new ArrayList();
          listValues.add(new LabelValueBean("m1", "Value7"));
          listValues.add(new LabelValueBean("m2", "Value8"));
          listValues.add(new LabelValueBean("m3", "value9"));
          listTotal.add(listValues);
          employeeForm.setListTotal(listTotal);
jsp code
<logic:iterate id="listValues" name="EmployeeForm" property="listTotal" indexId="index">
<tr><td>
<html:select property="myLabel" >
<html:options collection="listValues" labelProperty="label" property="value"/>
</html:select>
</logic:iterate>

hi,
instead of having it as a array i thought of going for an array list so that the manipulation would be much easier. ok here is my code.
    //This is the array list for names of the drop downs.
    private ArrayList selectedList;
    public ArrayList getSelectedList()
        return selectedList;
    public void setSelectedList(ArrayList pselectedList)
       this.selectedList = pselectedList;
    public ListValueVO getSelected(int index)
       return (ListValueVO) selectedList.get(index);
    }I have already mentioned in my previous posts that i have 3 lists in my form bean. One list for individual combo box. Another list for total number of combo boxes. The third list for the names of the combo boxes. Pls let me know whether i m going in the correct direction or not.

Can i limit the selection in Logical database ?

hello ,
how can i limit the number of records in Logical
                              database ( my "yyf" , not standart )   ?
i get dump on memory , when i press F4 , becouse i have to many records ,
so how can i limit the amount of records .
in se36 ?
in my program ( se38 ) ?
dump description
&INCLUDE INCL_INSTALLATION_ERROR
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 386785568 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.

Hi ,
Hope this helps you .
SELECT roll name
FROM tab
INTO TABLE it_tab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ROLL'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_ROLL'
      value_org       = 'S'
    TABLES
      value_tab       = it_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.

Reg Dynamic Selections in Logical DataBases

Hi All,
I am forcefully scheduling a report to run in background mode even though the users run it online.
While doing so I have handled all the parameters and the select options in the selection screen in the following way.
SELECT OPTIONS
wa_rspar-selname = 'BUDAT'.
   wa_rspar-kind = 'S'.
   if BUDAT[] is not initial.
      loop at BUDAT.
         wa_rspar-sign = BUDAT-sign.
         wa_rspar-option = BUDAT-option.
         wa_rspar-low = BUDAT-low.
         wa_rspar-high = BUDAT-high.
         append wa_rspar to rspar.
      endloop.
   else.
     wa_rspar-low = BUDAT.
     append wa_rspar to rspar.
   endif.
   clear: wa_rspar.
PARAMETERS.
wa_rspar-selname = 'SORTART'.
   wa_rspar-kind = 'P'.
   wa_rspar-low = SORTART.
   append wa_rspar to rspar.
   clear: wa_rspar.
While doing so since the report uses logical database-the dynamic selection portion has to be handled otherwise the dynamic selection is ignored and the report is displayed wrong.
How can we handle the dynamic selection portion for the forceful conversion of the program to background mode even if it is run online.
Has anyone faced this kind of issue.If so how was it resolved.
Thanks in advance.

Finally it seems not to be possible to fill the dynamic selection of a logical database during INITIALIZATION in a report which is using the respective logical database (under report properties).
My solution was to create a new select option within the customer program which refers to the respective database column (... FOR bsis-gjahr). If this column is supported by the dynamic selections of the logical database, then the values entered on the selection screen are automatically transferred and used by the logical database selection. It is just important to refer to the correct table, as BSIS-gjahr is working while BSEG-gjahr and BKPF-gjahr are not working in my example.
See the following link:
http://help.sap.com/saphelp_470/helpdata/en/9f/dba73935c111d1829f0000e829fbfe/content.htm?frameset=/de/9f/dba76035c111d1829f0000e829fbfe/frameset.htm&current_toc=/de/d3/2e974d35c511d1829f0000e829fbfe/plain.htm&node_id=305

Select option logic

Hi,
I have a requirement ....I have a select option in selection screen which is a date field.
I need to capture the values entered in select option for date in an internal table in the program.
Pls give me a logic to do this
Thanks in advance
Sarvan

Dear Sravan,
whenever the user enters some condtions/values in the select option on the screen, these values are automatically available in an internal table with the same name of the select option.
for example :
select option : s_first for spfli-carrid.
here s_first would be an internal table with values/conditions selected by the user at runtime with the fallowing structure. you can check the same at runtime.
SIGN OPTION LOW HIGH
Reward points if helpful
Thanks
Damodar

Is it possible to limit FX business rule to only records selected in logic

We are trying to convert from the standard older FX logic (MULTICURRENCYTRANS). The business rule is definitely faster when I run FX over all the records (purposefully). However, every time the FX stored procedure is called from a script logic file (package) it is running over ALL the records for the category specified in the package selection criteria. However, it is ignoring the other selections (product in this case). It should only update FX for the records specified in the package selection criteria. Because of this we are seeing increased run times on the packages. Is there additional logic needed in the FX script? If this is normal behavior, the stored procedure/business rule for FX is not a feasibly replacement for the script logic FX process previously delivered by SAP.
Is there a way to fix this so we can use the business rule?

I figured it out. I needed to add a couple of dimensions that are being passed from the package front end. The delivered business rule only has category as a variable. I had to add our entity dimension and our user defined product dimension.
SAP delivered:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','RATEINPUT','%SCOPETABLE%','%LOGTABLE%')
Revised for our installation:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','%PRODUCT_CP_SET%','%COCODE_SET%','','RATEINPUT','%SCOPETABLE%','%LOGTABLE%')
Carlos

Patch Select Confusion

Hi all,
I select my patches with a food pedal ("next patch") During my gig yesterday I had a very nice situation: I touched the pedal and the next patch was selected but it didnot stop there it went on and on and on and jumped from one patch to the next. I just could not stop it. Great! We had to interrupt the performance.
Question: I use a Kurzweil k 2000 as a master keyboard. Has anyone experiences with that gear? Is it a problem of the pedal? Of the keyboard? Something else? For some reasons midi signals are send to MS, but why?
After the gig I worked for about 2 hours with the same setup and everything was fine. Hmm. any ideas?
Thanx
:-)Raino

Hi all,
for thouse who are interested, maybe I found the reason: I read in the k 2000 manual that if you use the k 2000 as a midi contoller only, it's important that you set the midi to "midi" because if it's set to "both" (=midi can be send to the keyboard and to MS) a so called "midi loop" can happen and I think that that happend to me during the gig.
Last two gigs no problems happend...
:-)Raino

Importing patch names into Logic Express

Anyone know of a utility that will allow me to get the patch names out of my hardware synths and into Logic?

Yes, but the utility built into Logic is a simple cut/paste from a text file. I have 6 synths each with multiple banks and a lot of custom patches. Even if I could find the patch lists in .txt format it would still be a lot of typing. There has to be a better way. I've seen PC software that can pull patch names directly from synths via sysex. Logic can't do this as far as I know so I'm looking for a 'helper app' that can. I know Sound Diver used to be a way of doing this but as far as I know it's pretty much dead.

Patch Selection in Logic 8?

Similar Messages

Maybe you are looking for