Patch Successful on One system but not another?

I am wondering if there is a Cache dump or process of getting a patch system to recover from a failure where the patch has deployed successfully on a different system. There are a variety of errors depending on the patch as well as device. I see some remediation errors as well as server not found etc.
Will Clear cache help resolve this type of thing?
Does Windows Update service running cause problems with this process? Any other tips to get the rest of my deployment to become more successful?
If someone from Novell is listening... Where is the documentation on Patch deployment best practices? I have tried to review the online docs and can't find anything that gives clear guidelines on patch deployment. I also find that Windows update will show completely Updated by Microsoft yet ZPM shows massive patch deployments needed. I also have .Net 3.5.1 updates that showed successfully deployed, yet when the zac ps or DAU runs it still shows the update as needed.
Any help or guidance would be extremely helpful.
Thanks
Richard

rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Firefox crashes on start up for one user but not another

Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
Version: 31
Crashes on start up for one user but not another. Both are administrators.
I have uninstalled and re-installed. No change with each user.
Crashes in safe mode as well (holding down shift)
No addons present in other user.
Have ran Malwarebytes and cleaned
Have ran CCCleaner and cleane all including registry entries with Firefox uninstalled.

Create a new profile as a test to check if your current profile is causing the problems. 
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem 
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Bubble Event firing in one company but not another

Having spent the past 2 days trying to get the installer working (which it finally does thanks to people on this forum!), I've finally pushed my add-in out to people this morning.
Unfortunately, the bubbleevent seems to be being ignored in all companies bar the test company.
The code is below. The nominal codes do not begin with "720", so that section is not being fired in either company.
So, my question is, why would a bubble event work in one company but not another?
Private Sub oApp_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles oApp.ItemEvent
        Dim NumberRows As Long
        Dim oMatrix As SAPbouiCOM.Matrix
        Dim oRowCount As Integer
        Dim oCheck As SAPbouiCOM.EditText
        Dim oCheck2 As SAPbouiCOM.EditText
        REM Check for Profit Centre and Project Code on each line of Purchase Transactions
        If pVal.FormTypeEx = "142" Or pVal.FormTypeEx = "141" Or pVal.FormTypeEx = "181" Or _
        pVal.FormTypeEx = "139" Or pVal.FormTypeEx = "133" Or pVal.FormTypeEx = "179" Then
            REM Set to active form and Sales/Purchase transaction matrix
            oForm = oApp.Forms.ActiveForm
            oItem = oApp.Forms.Item(FormUID).Items.Item("38")
            oMatrix = oItem.Specific
            If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED And _
              pVal.Before_Action Then
                If pVal.ItemUID = "1" Then
                    NumberRows = oMatrix.RowCount
                    For oRowCount = 1 To NumberRows - 1
                        oCheck = oMatrix.Columns.Item("30").Cells.Item(oRowCount).Specific
                        If oCheck.Value = "" Then
                            oApp.MessageBox("Please enter a Profit Centre on row " & oRowCount)
                            BubbleEvent = False
                        End If
                        oCheck = oMatrix.Columns.Item("31").Cells.Item(oRowCount).Specific
                        If oCheck.Value = "" Then
                            oApp.MessageBox("Please enter a Project on row " & oRowCount)
                            BubbleEvent = False
                        End If
                        oCheck = oMatrix.Columns.Item("U_CarReg").Cells.Item(oRowCount).Specific
                        oCheck2 = oMatrix.Columns.Item("1").Cells.Item(oRowCount).Specific
                        If oApp.Company.DatabaseName = "FOLLIS_LIVE" Or oApp.Company.DatabaseName = "FOLLUK_TEST" Then
                            If oCheck.Value = "" And Left(oCheck2.Value, 3) = "720" Then
                                oApp.MessageBox("Please enter a Car Registration on row " & oRowCount)
                                BubbleEvent = False
                                Exit For
                            End If
                        End If
                    Next oRowCount
                End If
            End If
        End If
        REM Check for Profit Centre and Project Code on each line of Nominal Transactions
        If pVal.FormTypeEx = "392" Or pVal.FormTypeEx = "393" Then
            REM Set to active form, journal matrix
            oItem = oApp.Forms.Item(FormUID).Items.Item("76")
            oMatrix = oItem.Specific
            If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED And _
              pVal.Before_Action Then
                If pVal.ItemUID = "1" Then
                    NumberRows = oMatrix.RowCount
                    For oRowCount = 1 To NumberRows - 1
                        oCheck = oMatrix.Columns.Item("23").Cells.Item(oRowCount).Specific
                        If oCheck.Value = "" Then
                            oApp.MessageBox("Please enter a Profit Centre on row " & oRowCount)
                            BubbleEvent = False
                        End If
                        oCheck = oMatrix.Columns.Item("16").Cells.Item(oRowCount).Specific
                        If oCheck.Value = "" Then
                            oApp.MessageBox("Please enter a Project on row " & oRowCount)
                            BubbleEvent = False
                        End If
                    Next oRowCount
                End If
            End If
        End If
    End Sub

Hi Daniel,
Then the only option I see is that the If statement is true in one database, and false on the others.
If oApp.Company.DatabaseName = "FOLLIS_LIVE" Or oApp.Company.DatabaseName = "FOLLUK_TEST" Then
If oCheck.Value = "" And Left(oCheck2.Value, 3) = "720" Then
oApp.MessageBox("Please enter a Car Registration on row " & oRowCount)
BubbleEvent = False
Exit For
End If
End If
If oCheck.Value = "" Then
oApp.MessageBox("Please enter a Project on row " & oRowCount)
BubbleEvent = False
End If
One of this is should be different on the companies.
Nothing else comes to my mind.
Regards,
Ibai Peñ

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

On one PC but not another I am getting an error message: Exception: java.la

There is an applet on my site which is not loading for some users and not others.
On one PC but not another I am getting an error message: Exception: java.lang.ClassNotFound.Exception:CheckboxApp.class
The name of the applet is CheckboxApp
some other user of my site are also getting similar messages
Is there something from sun that can be downloaded by the users or is there some problem at the server level?
Thanks

It's probably because of the way the html that's calling the applet is coded, in conjunction with the vendor (Sun or MS) and version of the Plugin/JRE. This will help you ger started with diagnosis:
http://java.sun.com/products/plugin/

Problem with SMTP from one computer but not another

I have an iMac connected directly to my network via Ethernet and a MacBook Pro which connects via wireless. I have a program installed on my iMac that sends me alerts via e-mail, and it works just fine. When I try and use Mail, however, on my MBP with the exact same settings and credentials, it fails. To make this even more perplexing, Mail works fine from my office on a different network.
To work around this, I use Comcast's SMTP server on my laptop, but why would my regular e-mail provider's SMTP work on one machine and not another on the same network? The only difference is one is connected via Ethernet and the other by wireless.
I use a Time Capsule as my router and wireless access point. Has anyone got an idea about what's causing this?

Please report the relationship, if any, of the "regular e-mail provider's SMTP" and your ISP? If Comcast is your ISP, they regularly block use of Port 25, but if you have selected Use Default Port in Mail Preferences/Accounts/Account Information for the Outgoing Server, then it may be making the wrong choice to work with Comcast. Regardless of the ISP, for this regular account click on the arrows beside the name of the SMTP, choose Edit Server List, then click on the Advanced Tab that will then be seen and choose Use Custom Port, then enter the proper port directly -- that port is probably Port 587, but that could depend on the advisory of the email provider for using their SMTP.
Ernie

Risk terminator - Works in one system but not in the other

Hi
I have two SAP systems which is connected to one GRC system. Risk Terminator works well for the one system but does not work at all for the other.
I have done the necessary configuration, set-up the RFC connector, tested the connectors, tested the connections from the GRC system. All seems fine but when I create a role in PFCG risk terminator does not seem to be trigged at all in my one system.
Please advise
Regards
Mo

I would check the adapter for the other system and that the external program is maintained correctly along with all the settings in /VIRSA/ZRTCNFG

Store credit shows up on one computer, but not another

Happy Easter everyone,
I was wondering why my store credit shows up on one authorized computer, but not another? Is there a way to fix this? Or will I just have to make my purchases on that computer?
Thanks
Jason

An account's balance should show wherever you use the account (computer's iTunes, and in the App Store, iTunes store and iBookstore on iOS devices). Have you tried logging out and back into the account on the computer that it's not showing : Store > Sign Out menu option, that will then change to a Store > Sign In option (my balance has sometimes been slow to update on my computers/devices)

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Import Successful in one TRACK but failed another TRACK

Hi Experts,
I am on EP7.0 SP11, ERP2005, NW2004s.
I created two tracks for ESS modifications.
TRACK1: defined Runtime Systems: NWDI DEV = NWDI CONS, TEST
 1. checked in the components
 2. Imported the components in DEV system: Import is successful
 3. Did not import the components into CONS system, test system
 4. Imported the development configuration of DEV system into NWDS. I can see all the ESS applications. Active DCs , InActive DC views, etc.
TRACK2:defined Runtime Systems: NWDI DEV = NWDI CONS, TEST
 1. checked in the components
 2. Started Import of the components into DEV system one by one and SAP_ESS is last one:
 Simultaneously, the components with status "import finished" are imported into CONS system. I did this while import of the last component SAP_ESS into DEV system is still running in the same TRACK..
I do not know why import in one track is successful and in another is failed. Am I missing in the sequence of activities for the two tracks.
Regards,

Solved on my own.

Script works for one frame but not another

I set up 2 keyframes, each one loads a different text file
into a dynamic text box. The text box for the first keyframe is
named "session" and the text box for the second keyframe is named
"oneptq". The text file for the first text box is named Titles.txt
and the text file for the second keyframe is 100Q.txt. The code I'm
using is identical (except for the respective names of the text
boxes and text files) but for some reason the text will load in the
first text box but not the second.
Here's my AS for the first keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
session.text = lvLoader.textbody;
lvLoader.load("Titles.txt");
And my AS for the second keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
oneptq.text = lvLoader.textbody;
lvLoader.load("100Q.txt");
I can't figure this thing out. Please help. Thanks.

Have you double checked that it's a DYNAMIC text box? Maybe
it was accidentally swapped by to static at some point...

IPhoto 08 imported for one user but not another

We have iPhoto '08 ver 7.1.5 and it worked fine with my login. I could import photos from our Canon PowerShot SD960 into my iPhoto library. But when my wife logged in and tried to import the same photos she got a message stating "Unreadable Files" and "the following file could not be imported".
On her login using Image Capture, she could import the pictures off the camera and save them to her Desktop then she could view and also save them using Preview and could also import them to her iPhoto library from the Desktop folder she had saved them into.
I reformatted the camera's card and I also used iPhoto Library Manager and rebuilt her Library.
We can now both import pictures fine but I'm wondering for how long this will be the case.
Same exact situation existed with another camera we have - it worked for me but not for her.
Just curious to know what the cause might have been in case it's something we are doing that is causing the issue.

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

WDTHEMEROOT works in one client but not another

I'm looking at using the WDTHEMEROOT application parameter to set a theme. I've set it to 'sap-chrome' in our development client and that works fine when I test the application. When I log into another client on the same system, however, the WDTHEMEROOT parameter has no effect. I'm guessing there is a setting in the first client but not in the second but I don't know what that might be. Any ideas ?
thanks,
Malcolm.

Well,
I guess my excitement was shortlived. I changed the theme and did whatever the note suggested. It worked!
But then I changed it back to 'sap_chrome' and did all that the note suggested - it did not work. I am now stuck with the new incomplete theme and am not able to change it back to what it was earlier.
Any Help?
Thanks,
Sanjiv

Why will DVD play on one player but not another??

Hi,
I made an ISO file using devede and then burnt it to a DVD using K3B. The finished DVD will work on a Magnavox player but not a JVC. Is there anything I can do about this??? Do some players have a "must be produced commercially" filter or something???
Jim
Last edited by MillTek (2008-04-20 20:45:12)

First, I am assuming you recorded your iso on +R type media. Next, I'm guessing that the player that won't play your DVD is the older of the two players. Some DVD players, especially older ones don't like +R media. If this is the case, here is a possible fix.
Here is a thread on another forum which discuses changing the booktype on your DVD burner. Here is a quote from the original post:
There have been many questions asked about how to booktype +R media to DVD-ROM
Many standalone Players, HDD recorders/players and games consoles don't like +R media but they are happy enough to play -R or DVD-ROM.
Some drive brands have tools to change this option but others don't. I have found that the easiest way to change your BOOKTYPE setting is to use a small burning tool called IMGBurn which can be found doing a Google search.
Below you can see some screen shots which guide you through changing your BOOKTYPE setting. For this I have used my NEC4551 but IMGBurn supports NU-Tech, Plextor, Ricoh, Samsung, BenQ, LG, Lite-on and NEC.
Once you have changed your BOOKTYPE setting, when you burn a +R/+RW disc it will be burned as a DVD-ROM which is the same as a bought movie and most players are happy to play these.
Since my DVD players are happy with +R media, I haven't tried this. Both of my players are fairly new, and I made sure that +R was listed on the box as one of the formats accepted by that player.
As usual, try this at your own risk.
Pudge

Patch Successful on One system but not another?

Similar Messages

Maybe you are looking for