Patch to add support for asynchronous validators in ValidatorGroup

I have uploaded to the bug system a patch that modifies ValidatorGroup to support asynchronous validators, that is, validators that communicate with the server to give an answer.
Feel free to comment, I am not an expert, so...
https://bugs.adobe.com/jira/browse/CGM-45

Hi All. Just reading about the lack of support for the
SCXI-1600 and Windows 7 (64bit) It sounds like I am in the same boat as the
rest of you. I have 4 SCXI systems and IT head office is rolling out Windows 7
(64) across the board. (Worldwide). so now I have the choice of either
purchasing 4 new systems ($160K USD), Trying to just get the Windows 7 (32)
operating system (if possible) or start buying new hardware. Then I need to
justify why I am spending this money. Like you all, it has been just so easy to
use the NI stuff but when you are forced to upgrade and there is no support for
one party it does make our job so much harder. Yes I would like 64bit support
for the SCXI-1600 module.

Similar Messages

  • Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.

    Hello Everyone,
    Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.For Symantec Endpoint Protection 12.1, a maintenance patch has been released on July 29, 2015. Customers will need to be current on maintenance to receive the maintenance patch update. For more information, visit our SEP 12.1 Windows 10 Knowledge Base.You can upgrade to Windows 10 with Symantec Endpoint Protection 12.1.6 MP1 installed. You must uninstall earlier versions of Symantec Endpoint Protection. The operating system upgrade stops if it detects an earlier version of Symantec Endpoint Protection.The following operating system upgrade paths are supported with 12.1.6 MP1 installed:Windows 8.1 to Windows 10Windows 8 to Windows 10Windows 7 to Windows 10For more details check the following article:http://www.symantec.com/docs/INFO2746SEP...
    This topic first appeared in the Spiceworks Community

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

    Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

    Edit  ---> referance ----->   general    ------> language

  • [svn:fx-trunk] 10876: Add support for drag-and-drop from Spark List to Spark List.

    Revision: 10876
    Author:   [email protected]
    Date:     2009-10-05 15:20:07 -0700 (Mon, 05 Oct 2009)
    Log Message:
    Add support for drag-and-drop from Spark List to Spark List.
    - List drop related handlers
    - LayoutBase APIs
    - VerticalLayout DND support
    Notes:
    - ListSkin is not final.
    - Drag-scrolling not yet implemented.
    QE notes: Only VerticalLayout works, HorizontalLayout still not implemented.
    Doc notes: None
    Bugs: None
    Reviewer: Deepa
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/VerticalLayout.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/LayoutBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ListSkin.mxml
        flex/sdk/trunk/frameworks/spark-manifest.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/supportClasses/DropLocation.as

    Whoops, disregard my question - I just read the spec that indicates drag and drop is scheduled for later work.
    David

  • Is it possible to add support for new database type in Data Modeler?

    Hi,
    I see that Data Modeler v.4 supports different versions of Oracle, DB2 and MS SQL. Is it possible to add support for a new database family,
    PostgreSQL for example? I hoped that RDBMS Site editor can do it, but so far I don't see any possibility to add XML files with metadata for a new RDBMS.
    I did it previously for PowerDesigner were it is possible to add and modify definitions for new relational databases.
    Thank you,
    Sergei

    There is discussion option as an out of the box feature. Check this: BI launch pad 4.0: Participate in a discussion about a document

  • Add support for custom xmp panels

    Please add support for custom xmp panels.
    Thanks

    I would strongly support that too!!!
    Here is why: We have been working at an XMP implementation of the Darwin Core to support standardized metadata on biodiversity information. Have a look here. I would love to have an Panel in Lightroom to support the metadata that I am embedding with IDImager:
    http://wiki.idimager.com/index.php?title=DarwinCoreXMP#.27.27.27Darwin_Core_XMP.27.27.27
    Cheers,
    Frank

  • [svn:osmf:] 10441: Add support for strict validation of VAST documents during parsing.

    Revision: 10441
    Author:   [email protected]
    Date:     2009-09-20 16:23:43 -0700 (Sun, 20 Sep 2009)
    Log Message:
    Add support for strict validation of VAST documents during parsing.
    Modified Paths:
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/parser/VASTParser.as
        osmf/trunk/libs/VASTTest/org/openvideoplayer/vast/parser/TestVASTParser.as

    Hi, everything in the "Quick Reference" section should be commented out with ;
    You should change those settings further down in the php.ini file.
    Example:
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    display_errors = Off
    Last edited by adrianx (2013-07-26 12:32:02)

  • [svn:bz-trunk] 20582: Add support for destination-include directory-path=" mydir"/ .

    Revision: 20582
    Revision: 20582
    Author:   [email protected]
    Date:     2011-03-03 12:35:14 -0800 (Thu, 03 Mar 2011)
    Log Message:
    Add support for <destination-include directory-path="mydir"/>.
    This will process each file ending in ".xml" as an individual <destination-include file-path=""/> element, allowing a web application to define a directory of destination configuration snippets.
    Added a new API to ConfigurationFileResolver.java: getFiles(String dir).
    This returns a list of XML files contained in this directory relative to the current configuration file.
    Updated both the ServletResourceResolver and the LocalFileResolver with implementations.
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
        blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationFileResolver.java
        blazeds/trunk/modules/common/src/flex/messaging/config/LocalFileResolver.java
        blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java
        blazeds/trunk/modules/core/src/flex/messaging/config/ServletResourceResolver.java

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • [svn:fx-4.x] 14985: Add support for mirroring for both error tips and tool tips in positionTip ().

    Revision: 14985
    Revision: 14985
    Author:   [email protected]
    Date:     2010-03-24 09:40:24 -0700 (Wed, 24 Mar 2010)
    Log Message:
    Add support for mirroring for both error tips and tool tips in positionTip().  The layoutDirection of the toolTip will be the same as the component it goes with, or LTR, if the component is not ILayoutDirectionElement.
    QE notes:
    Doc notes: None
    Bugs: SDK-25821
    Reviewed By: Jason
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25821
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/managers/ToolTipManagerImpl.as
        flex/sdk/branches/4.x/tools/dependencychecker/frameworkSwcExceptionsList.txt

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • 10.4.7 Adds Support for Verizon/Sprint EVDO Cards

    Mac OS X 10.4.7 Adds support for the following EVDO Cards:
    - Novatel 620 (Verizon V620, Sprint S620)
    - Sierra AirCard 580 (Verizon & Sprint)
    - PC5220 (already was supported in 10.3.5, adds support for PC5220 new firmware)
    Lots more information and screenshots at:
    http://www.evdoinfo.com/TheNews/Latest_News/Apple_Adds_EVDO_Card_Support_in_10.4.720060627772/
    G5 Dual 2.5 GHZ, PowerBook G4 15 inch   Mac OS X (10.4.6)  

    If this is correct, then when I get my Merlin S620, all I need to do is pop it into my 17" Powerbook and I'm good to go??!?!?! If so, then WOOOOOOOOOOTTT! However, I am not getting an unlocked card...will I still need to go through a PC to unlock it? What are the steps?

  • HT201071 Please add support for Camera RAW Canon PowerShot G2

    Please add support for Camera RAW Canon PowerShot G2,
    it may be ancient, but there are still a lot of G2s out there, and it's annoying to have a different workflow for pictures from them...
    best,
    case

    You are not writing to Apple here.  This is a user to user help forum.
    Instead, send your comments or suggestions directly to Apple via Mac OS X Feedback.
    You are unlikely to get a direct response from your "Fedback", but you can be certain that the responsible Apple people will see your input for consideration in future product development.

  • [svn:osmf:] 13966: 1. Integrate code changes from Matthew to remove timeBias and add support for subclip

    Revision: 13966
    Revision: 13966
    Author:   [email protected]
    Date:     2010-02-03 15:04:44 -0800 (Wed, 03 Feb 2010)
    Log Message:
    1. Integrate code changes from Matthew to remove timeBias and add support for subclip
    2. A minor bug fix with the index handler
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
        osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingState.as
        osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as

    Maybe you try posting in one of the Enterprise & Remote Computing forums:
    http://forum.java.sun.com/category.jspa?categoryID=14
    And please use the forum CODE tags for formatted readable display of your code on the board.
    http://forum.java.sun.com/post!reply.jspa?messageID=9989322#

  • Please add support for MXF files created by Blackmagic Hyperdeck Studio

    We have a Hyperdeck Studio that records DNxHD220 files in a MXF wrapper. Right now it is not possible to import them into Premiere CS5.5.
    It would be great if Adobe would add support for those files.
    Regards
    NFact

    It's mostly users here in the forums.  Here's how to get Adobe to listen.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Can you please add support for Gmail's archive feature?

    Can you please add support for Gmail's archive feature? I would like to be able to "archive" emails using the menu when I'm accessing my gmail account, reading and browsing emails. I would also like "archived" emails to be removed from the email listing once I tap the refresh option on the menu. Could you tell Blackberry to implement these features on the next update?

    hello, you can do this in current versions already :))
    for detail please see [[How to clear the Firefox cache]]

  • HT201071 Please add support for Hasselblad CFV-50

    I just replaced my Hasselblad CFV-16 with the CFV-50, and now I have bad redish view only of my files both in Preview and Aperture.
    Please add support for the file format from CFV-50, it's not a all new Digital Back (it's out since severals years now).
    We can still convert files into DNG using Hasseblad tools and made the DNG file reconized by Preview and Aperture, but would like to be able to manage my original RAW files from Hasselblad in Aperture like I was used to do

    This is a user-to-user forum and is not monitored by Apple for feedback purposes. You can give feedback to Apple here: Apple - Mac OS X - Feedback

Maybe you are looking for

  • Quicktime movie in iPhoto

    I have been working with iPhoto '11. I need the following question answered. After downloading my photos and video clips from my camera into iPhoto, how can I add the video clips to iMovie? The movies are in a Quicktime format and I am not able to ad

  • Condition Type Value

    Hi All, We have a manual condition type ZP00, the value(2500) for this condition type is populted through file. In the sales order it is taking as 25000. i.e multipl of 10 (2500*10=25000). What could be the problem? We are creating the sales order th

  • Return procedure for defective parts?

    Hi, The power adaptor for my ibook G4 suddenly stop working yesterday, It's only 2 month old. I tried another power adaptor from my friend which works on my ibook. So my power adaptor must have something wrong. I followed the instruction http://docs.

  • Hierarchy error

    Hi, While uploading the VENDOR Hierarchy data from R/3 system getting the error message like: "Node characteristic 0CLASS_NUM is not entered as hierarchy characteristic for 0VENDOR " What does it mean exactly? Analysis: The InfoObject 0CLASS_NUM is m

  • Where is config file for port 5500 ??? Help

    Where is config file for port 5500 ??? Help Hello I have 10g_win32_db, and I want to change the http://localhost:5500 to something else where can i find the config file for that ? thanks